RESUMO
When building artificial nanochannels, having a scalable robust platform with controlled morphology is important, as well as having the option for final functionalization of the channels for the selective transport of water and proteins. We have previously developed asymmetric membranes that have a surface layer of very sharp pore size distribution, surface charge and pore functionalization. Here, a more complex bioinspired platform is reported. Hierarchical isotropic porous structures with spherical micrometer-sized cavities, interconnected by hexagonally ordered nanochannels, were prepared based on the phase separation of polystyrene-b-poly(t-butyl acrylate) block copolymers, following a nucleation and growth mechanism. The structure was imaged by scanning electron microscopy, which demonstrated a high density of ordered nanochannels. The hexagonal order formed by the self-assembly in solution was confirmed by small-angle X-ray scattering. The structure evolution was investigated by time-resolved grazing-incidence small-angle X-ray scattering. The assembled hydrophobic hierarchical structure was then converted to a hydrophilic structure by acid hydrolysis, leading to nanochannels covered by carboxylic groups and therefore convenient for water transport.
Assuntos
Acrilatos/química , Nanotecnologia , Poliestirenos/química , Microscopia Eletrônica de Varredura , Tamanho da Partícula , Porosidade , Espalhamento a Baixo Ângulo , Propriedades de Superfície , Difração de Raios XRESUMO
In this work the coherence properties of the synchrotron radiation beam from an X-ray undulator in a fourth-generation storage ring are analyzed. A slightly focused X-ray beam is simulated using a wavefront propagation through a non-redundant array of slits and the mutual coherence function is directly obtained and compared with the Gaussian-Schell approximation. The numerical wave propagation and the approximate analytical approaches are shown to agree qualitatively, and it is also shown that, when the coherent fraction is selected by a finite aperture before the focusing element, even achromatic focusing systems like total reflection mirrors become slightly chromatic. This effect is also well accounted for in the Gaussian-Schell model. The wavefront propagation simulation through the non-redundant array was repeated with an imperfect mirror demonstrating that, although the wavefront is distorted, its coherent length is practically unchanged.
RESUMO
Synchrotron-radiation-based X-ray imaging techniques using tender X-rays are facing a growing demand, in particular to probe the K absorption edges of low-Z elements. Here, a mathematical model has been developed for estimating the detective quantum efficiency (DQE) at zero spatial frequency in the tender X-ray energy range for photon-counting detectors by taking into account the influence of electronic noise. The experiments were carried out with a Medipix3RX ASIC bump-bonded to a 300â µm silicon sensor at the Soft X-ray Spectroscopy beamline (D04A-SXS) of the Brazilian Synchrotron Light Laboratory (LNLS, Campinas, Brazil). The results show that Medipix3RX can be used to develop new imaging modalities in the tender X-ray range for energies down to 2â keV. The efficiency and optimal DQE depend on the energy and flux of the photons. The optimal DQE values were found in the 7.9-8.6â keV photon energy range. The DQE deterioration for higher energies due to the lower absorption efficiency of the sensor and for lower energies due to the electronic noise has been quantified. The DQE for 3â keV photons and 1 × 10(4)â photons pixel(-1) s(-1) is similar to that obtained with 19â keV photons. Based on our model, the use of Medipix3RX could be extended down to 2â keV which is crucial for coming applications in imaging techniques at modern synchrotron sources.
RESUMO
Nucleation and growth of SBA-15 silica nanostructured particles with well-defined morphologies has been followed with time by small-angle X-ray scattering (SAXS) and ultrasmall-angle X-ray scattering (USAXS), using synchrotron radiation. Three different morphologies have been compared: platelets, toroids, and rods. SEM observations of the particles confirm that two key physical parameters control the morphology: the temperature and the stirring of the solution. USAXS curves demonstrate that primary particles with a defined shape are present very early in the reaction mixture, immediately after a very fast nucleation step. This nucleation step is detected at 10 min (56 °C) or 15 min (50 °C) after the addition of the silica precursor. The main finding is that the USAXS signal is different for each type of morphology, and we demonstrate that the difference is related to the shape of the particles, showing characteristic form factors for the different morphologies (platelet, toroid, and rod). Moreover, the size of the mesocrystal domains is correlated directly with the particle dimensions and shape. When stirred, aggregation between primary particles is detected even after 12 min (56 °C). The platelet morphology is promoted by constant stirring of the solution, through an oriented aggregation step between primary particles. In contrast, toroids and rods are only stabilized under static conditions. However, for toroids, aggregation is detected almost immediately after nucleation.
RESUMO
The question of the influence of nanoparticles (NPs) on chain dimensions in polymer nanocomposites (PNCs) has been treated mainly through the fundamental way using theoretical or simulation tools and experiments on well-defined model PNCs. Here we present the first experimental study on the influence of NPs on the polymer chain conformation for PNCs designed to be as close as possible to industrial systems employed in the tire industry. PNCs are silica nanoparticles dispersed in a styrene-butadiene-rubber (SBR) matrix whose NP dispersion can be managed by NP loading with interfacial coatings or coupling additives usually employed in the manufacturing mixing process. We associated specific chain (d) labeling, and the so-called zero average contrast (ZAC) method, with SANS, in situ SANS and SAXS/TEM experiments to extract the polymer chain scattering signal at rest for non-cross linked and under stretching for cross-linked PNCs. NP loading, individual clusters or connected networks, as well as the influence of the type, the quantity of interfacial agent and the influence of the elongation rate have been evaluated on the chain conformation and on its related deformation. We clearly distinguish the situations where the silica is perfectly matched from those with unperfected matching by direct comparison of SANS and SAXS structure factors. Whatever the silica matching situation, the additive type and quantity and the filler content, there is no significant change in the polymer dimension for NP loading up to 15% v/v within a range of 5%. One can see an extra scattering contribution at low Q, as often encountered, enhanced for non-perfect silica matching but also visible for perfect filler matching. This contribution can be qualitatively attributed to specific h or d chain adsorption on the NP surface inside the NP cluster that modifies the average scattering neutron contrast of the silica cluster. Under elongation, NPs act as additional cross-linking junctions preventing chain relaxation and giving a deformation of the chain with the NP closer to a theoretical phantom network prediction than a pure matrix.
RESUMO
We report the self-assembly of gold nanowires into hexagonal superlattices in liquid phase followed by in situ small-angle X-ray scattering and give new insights into their growth mechanism. The unprecedented large interwire distance of 8 nm strongly suggests the stabilization of the ultrathin gold nanowires by a ligand's double layer composed of oleylamine and oleylammonium chloride. The one-dimensional growth is discussed, opening perspectives toward the control growth and self-assemblies of metallic nanowires.
RESUMO
An amphiphilic prodrug of gemcitabine, a cytidine analogue used clinically against various tumors, had been previously synthesized by covalent coupling to squalene, a natural isoprenoid chain. The resulting bioconjugate self-assembled spontaneously in water as nanoparticles, displaying an impressive activity both in vitro and in vivo. The aim of the present study was to determine the influence of the length of the isoprene moiety on the structure of the nanoparticles, in an attempt to establish a relationship between the chemical structure of the prodrug, its supramolecular organization, and its pharmacological activity. Remarkably, gemcitabine-squalene and gemcitabine-5-isoprenes, which differ only in the position of two methyl groups on the hydrophobic chain, displayed different supramolecular organizations and different anticancer activities on some cell lines. This difference in activity was related to the ability of nanoparticles to be internalized by cells.
Assuntos
Antineoplásicos/química , Antineoplásicos/farmacologia , Desoxicitidina/análogos & derivados , Nanopartículas/química , Animais , Linhagem Celular Tumoral , Proliferação de Células/efeitos dos fármacos , Desoxicitidina/química , Desoxicitidina/farmacologia , Humanos , Camundongos , Microscopia Confocal , Esqualeno/química , GencitabinaRESUMO
The initial stage of calcium carbonate nucleation and growth, found usually in "natural" precipitation conditions, is still not well understood. The calcium carbonate formation for moderate supersaturation level could be achieved by an original method called the fast controlled precipitation (FCP) method. FCP was coupled with SAXS (small-angle X-ray scattering) measurements to get insight into the nucleation and growth mechanisms of calcium carbonate particles in Ca(HCO3)2 aqueous solutions. Two size distributions of particles were observed. The particle size evolutions of these two distributions were obtained by analyzing the SAXS data. A nice agreement was obtained between the total volume fractions of CaCO3 obtained by SAXS analysis and by pH-resistivity curve modeling (from FCP tests).
Assuntos
Carbonato de Cálcio/síntese química , Precipitação Química , Carbonato de Cálcio/química , Concentração de Íons de Hidrogênio , Espalhamento a Baixo Ângulo , Difração de Raios XRESUMO
Squalene-based nucleolipids, including anticancer or antiviral prodrugs, gave rise to nanoparticles displaying a diversity of structures upon nanoprecipitation in water. Synchrotron small-angle X-ray scattering and cryo-TEM imaging revealed that both the nature of the nucleoside and the position of the squalene moiety relative to the nucleobase determined the self-assembly of the corresponding bioconjugates. It was found that small chemical differences resulted in major differences in the self-organization of nucleolipids when squalene was grafted onto the nucleobase whereas only lamellar phases were observed when squalene was linked to the sugar moiety. The key role of hydrogen bonds between nucleobases in the formation of the lamellar phases was suggested, in agreement with molecular simulations. These findings provide a way to fine tune the supramolecular organization of squalene-based prodrugs, with the aim of improving their pharmacological activity.
Assuntos
Lipídeos/síntese química , Nanopartículas/química , Pró-Fármacos/síntese química , Esqualeno/química , Lipídeos/química , Modelos Moleculares , Simulação de Dinâmica Molecular , Estrutura Molecular , Tamanho da Partícula , Pró-Fármacos/química , Propriedades de SuperfícieRESUMO
Self-assembled nanoarchitectures based on biological molecules are attractive because of the simplicity and versatility of the building blocks. However, size control is still a challenge. This control is only possible when a given system is deeply understood. Such is the case with the lanreotide acetate, an octapeptide salt that spontaneously forms monodisperse nanotubes when dissolved into pure water. Following a structural approach, we have in the past demonstrated the possibility to tune the diameter of these nanotubes while keeping a strict monodispersity, either by chemical modification of one precise amino acid on the peptide sequence or by changing the size of the counterions. On the basis of these previous studies, we replaced monovalent counterions by divalent ones to vary the number of walls. Indeed, in the present work, we show that lanreotide associated with a divalent counterion forms double-walled nanotubes while keeping the average diameter constant. However, the strict monodispersity of the number of walls was unexpected. We propose that the divalent counterions create an adhesion force that can drive the wall packing. This adhesion force is counterbalanced by a mechanical one that is related to the stiffness of the peptide wall. By taking into account these two opposite forces, we have built a general model that fully explains why the lanreotide nanotubes formed with divalent counterions possess two walls and not more.
Assuntos
Nanotubos/química , Peptídeos/química , Modelos Moleculares , Conformação Molecular , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
The formation of two-dimensional (2D)-hexagonal (p6m) silica-based hybrid materials from concentrated micellar solutions (10 wt %) of two nonionic fluorinated surfactants, R(7)(F)(EO)(8) and R(8)(F)(EO)(9), is investigated in situ using synchrotron time-resolved small angle X-ray scattering (SAXS). The two surfactants form direct micelles with different structures prior to the silica precursor addition as demonstrated by SAXS and SANS. R(8)(F)(EO)(9) gives spherical micelles and R(7)(F)(EO)(8) more complex ones, modeled here as short wormlike micelles. The in situ SAXS experiments reveal that both surfactants form well-ordered 2D-hexagonal hybrid materials after the addition of the silica precursor, in coexistence with an excess of surfactant micelles. The structures of both 2D-hexagonal phases are compared just after precipitation, and it is found that more robust and larger silica walls are formed for R(8)(F)(EO)(9) than for R(7)(F)(EO)(8). This could explain why only the material obtained with R(8)(F)(EO)(9) is stable upon washing, as observed previously. Moreover, it is proposed that in both cases, only a part of the micelles interact with the silica oligomers and undergo structural modifications before forming the 2D-hexagonal mesophase. The obtained results are finally discussed in the more general framework of the templating mechanism for nonionic surfactants.
RESUMO
Among noncovalent forces, electrostatic ones are the strongest and possess a rather long-range action. For these reasons, charges and counterions play a prominent role in self-assembly processes in water and therefore in many biological systems. However, the complexity of the biological media often hinders a detailed understanding of all the electrostatic-related events. In this context, we have studied the role of charges and counterions in the self-assembly of lanreotide, a cationic octapeptide. This peptide spontaneously forms monodisperse nanotubes (NTs) above a critical concentration when solubilized in pure water. Free from any screening buffer, we assessed the interactions between the different peptide oligomers and counterions in solutions, above and below the critical assembly concentration. Our results provide explanations for the selection of a dimeric building block instead of a monomeric one. Indeed, the apparent charge of the dimers is lower than that of the monomers because of strong chemisorption. This phenomenon has two consequences: (i) the dimer-dimer interaction is less repulsive than the monomer-monomer one and (ii) the lowered charge of the dimeric building block weakens the electrostatic repulsion from the positively charged NT walls. Moreover, additional counterion condensation (physisorption) occurs on the NT wall. We furthermore show that the counterions interacting with the NTs play a structural role as they tune the NTs diameter. We demonstrate by a simple model that counterions adsorption sites located on the inner face of the NT walls are responsible for this size control.
Assuntos
Nanotubos/química , Peptídeos/química , Adsorção , Sequência de Aminoácidos , Modelos Moleculares , Conformação Molecular , Peptídeos Cíclicos/química , Somatostatina/análogos & derivados , Somatostatina/químicaRESUMO
The mechanisms of formation of organically modified (phenyl, vinyl, and methyl) silica materials with cubic Pm3n and hexagonal p6m periodic mesostructures obtained in one step in the presence of the cetyltrimethylammonium bromide (CTA(+)B) surfactant are reported in this study. Understanding the way these complex materials form is difficult but undoubtedly necessary for controlling the material structure and its properties because of the combined presence of surface organic groups and large surface areas. Here, the mechanism of formation is clarified on the basis of the modeling of time-resolved in situ small angle X-ray scattering (SAXS) experiments, with a specific focus on the micelle evolution during material formation. Their fast self-assembly is followed for the first time with a quick temporal resolution of a few seconds using a third-generation synchrotron radiation source. To better understand the behavior of the complex organic-containing mesostructure, we perform a comparative study with the corresponding organo-free, isostructural materials obtained from three different surfactants (CTA(+), CTEA(+), and CTPA(+)) having a constant chain length (C(16)) and an increasing polar head volume (met-, et-, and prop-). Numerical modeling of SAXS data was crucial to highlighting a systematic sphere-to-rod micellar transition, otherwise undetected, before the formation of the 2D hexagonal phase in both organo-free and organo-containing systems. Then, two different pathways were found in the formation of the cubic Pm3n mesostructure: either an ordering transition from concentrated flocs of spherical micelles (from CTEA(+) or CTPA(+)) for pure TEOS systems or a structural transformation from an intermediate 2D hexagonal mesophase in organosilane systems (from CTA(+)). Combining the comparison between organo-free and organo-containing systems with numerical modeling, we find that the hexagonal-to-cubic phase transition in the organically modified materials seems to be strongly influenced not only by the obvious presence of the organic group but also by the quicker and more massive condensation kinetics of silicate oligomers on the CTA(+) micellar surface. Finally, quite unexpectedly, we find a wormlike-to-sphere micellar transition in the CTPA(+) system.
RESUMO
UsingoperandoBragg coherent x-ray diffraction imaging, we visualised three-dimensionally a single twinned-gold nanocrystal during the CO oxidation reaction. We describe the defect dynamics process occurring under operating conditions and indicate the correlation between the nucleation of highly strained regions at the surface of the nanocrystal and its catalytic activity. Understanding the twinning deformation mechanism sheds light on the creation of active sites, and could well contribute to the understanding of the catalytic behaviour of other catalysts. With the start-up of 4th generation synchrotron sources, we anticipate that coherent hard x-ray diffraction imaging techniques will play a major role in imagingin situchemical processes.
RESUMO
Understanding catalysts strain dynamic behaviours is crucial for the development of cost-effective, efficient, stable and long-lasting catalysts. Here, we reveal in situ three-dimensional strain evolution of single gold nanocrystals during a catalytic CO oxidation reaction under operando conditions with coherent X-ray diffractive imaging. We report direct observation of anisotropic strain dynamics at the nanoscale, where identically crystallographically-oriented facets are qualitatively differently affected by strain leading to preferential active sites formation. Interestingly, the single nanoparticle elastic energy landscape, which we map with attojoule precision, depends on heating versus cooling cycles. The hysteresis observed at the single particle level is following the normal/inverse hysteresis loops of the catalytic performances. This approach opens a powerful avenue for studying, at the single particle level, catalytic nanomaterials and deactivation processes under operando conditions that will enable profound insights into nanoscale catalytic mechanisms.
RESUMO
Mitochondria are dynamic organelles that change morphology to adapt to cellular energetic demands under both physiological and stress conditions. Cardiomyopathies and neuronal disorders are associated with structure-related dysfunction in mitochondria, but three-dimensional characterizations of the organelles are still lacking. In this study, we combined high-resolution imaging and 3D electron density information provided by cryo-soft X-ray tomography to characterize mitochondria cristae morphology isolated from murine. Using the linear attenuation coefficient, the mitochondria were identified (0.247 ± 0.04 µm-1) presenting average dimensions of 0.90 ± 0.20 µm in length and 0.63 ± 0.12 µm in width. The internal mitochondria structure was successfully identified by reaching up the limit of spatial resolution of 35 nm. The internal mitochondrial membranes invagination (cristae) complexity was calculated by the mitochondrial complexity index (MCI) providing quantitative and morphological information of mitochondria larger than 0.90 mm in length. The segmentation to visualize the cristae invaginations into the mitochondrial matrix was possible in mitochondria with MCI ≥ 7. Altogether, we demonstrated that the MCI is a valuable quantitative morphological parameter to evaluate cristae modelling and can be applied to compare healthy and disease state associated to mitochondria morphology.
Assuntos
Imageamento Tridimensional/métodos , Mitocôndrias Musculares/ultraestrutura , Microtomografia por Raio-X/métodos , Animais , Células Cultivadas , Criopreservação/métodos , Imageamento Tridimensional/normas , Limite de Detecção , Miócitos de Músculo Liso/ultraestrutura , Ratos , Microtomografia por Raio-X/normasRESUMO
Lignin is a heterogeneous aromatic polymer responsible for cell wall stiffness and protection from pathogen attack. However, lignin represents a bottleneck to biomass degradation due to its recalcitrance related to the natural cell wall resistance to release sugars for fermentation or further processing. A biological approach involving genetics and molecular biology was used to disrupt lignin pathway synthesis and decrease lignin deposition. Here, we imaged three-dimensional fragments of the petioles of wild type and C4H lignin mutant Arabidopsis thaliana plants by synchrotron cryo-ptychography. The three-dimensional images revealed the heterogeneity of vessels, parenchyma, and fibre cell wall morphologies, highlighting the relation between disturbed lignin deposition and vessel implosion (cell collapsing and obstruction of water flow). We introduce a new parameter to accurately define cell implosion conditions in plants, and we demonstrate how cryo-ptychographic X-ray computed tomography (cryo-PXCT) provides new insights for plant imaging in three dimensions to understand physiological processes.
Assuntos
Arabidopsis/química , Arabidopsis/ultraestrutura , Lignina/análise , Arabidopsis/genética , Imageamento Tridimensional , Lignina/genética , Mutação , Tomografia Computadorizada por Raios XRESUMO
Poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) (F127) hydrogels have been used to deliver nitric oxide (NO) topically in biomedical applications. Here, the effect of F127 microenvironments on the photochemical NO release from S-nitrosoglutathione (GSNO) was investigated in F127 solutions 7.6â¯wt% 15â¯wt% and 22.5â¯wt% at 15⯰C and 37⯰C. Small-angle X-ray Scattering (SAXS) and Differential Scanning Calorimetry (DSC) measurements, along with proton Nuclear Magnetic Resonance (1H NMR) spectral shifts and T2 relaxation data at six different concentration-temperature conditions, allowed identifying F127 microphases characterized by: a sol phase of unimers; micelles in non-defined periodic order, and a gel phase of cubic packed micelles. Kinetic measurements showed that GSNO photodecompositon proceeds faster in micellized F127 where GSNO is segregated to the intermicellar microenvironment. Real time kinetic monitoring of NO release and T2 relaxation profiles showed that NO is preferentially partitioned into the hydrophobic PPO cores of the F127 micelles, with the consequent decrease in its rate of release to the gas phase. These results show that F127 microphases affect both the kinetics of GSNO photodecomposition and the rate of NO escape and can be used to modulate the photochemical NO delivery from F127/GSNO solutions.
Assuntos
Hidrogéis/química , Óxido Nítrico/química , Poloxâmero/química , Polietilenoglicóis/química , Polímeros/química , Propilenoglicóis/química , S-Nitrosoglutationa/química , Portadores de Fármacos/química , Liberação Controlada de Fármacos , Cinética , Micelas , Processos Fotoquímicos , TemperaturaRESUMO
The chemical properties of materials are dependent on dynamic changes in their three-dimensional (3D) structure as well as on the reactive environment. We report an in situ 3D imaging study of defect dynamics of a single gold nanocrystal. Our findings offer an insight into its dynamic nanostructure and unravel the formation of a nanotwin network under CO oxidation conditions. In situ/operando defect dynamics imaging paves the way to elucidate chemical processes at the single nano-object level towards defect-engineered nanomaterials.
RESUMO
Topical nitric oxide (NO) delivery has been shown to accelerate wound healing. However, delivering NO to wounds at appropriate rates and doses requires new biomaterial-based strategies. Here, we describe the development of supramolecular interpolymer complex hydrogels comprising PEO-PPO-PEO (F127) micelles embedded in a poly(acrylic acid) (PAA) matrix, with S-nitrosoglutathione (GSNO) molecules dissolved in the hydrophilic domain. We show that PAA:F127/GSNO hydrogels start releasing NO upon hydration at rates controlled by their rates of water absorption. SAXS measurements indicate that the supramolecular structure of the hydrogels retains long-range order domains of F127 micelles. The PAA/F1227 hydrogels displayed dense morphologies and reduced rates of hydration. The NO release rates remain constant over the first 200â¯min, are directly correlated with the hydration rates of the PAA:F127/GSNO hydrogels, and can be modulated in the range of 40â¯nmol/gâ¯h to 1.5⯵mol/gâ¯h by changing the PAA:F127 mass ratio. Long-term NO-release profiles over 5â¯days are governed by the first-order exponential decay of GSNO, with half-lives in the range of 0.5-3.4â¯days. A preliminary in vivo study on full-thickness excisional wounds in mice showed that topical NO release from the PAA:F127/GSNO hydrogels is triggered by exudate absorption and leads to increased angiogenesis and collagen fiber organization, as well as TGF-ß, IGF-1, SDF-1, and IL-10 gene expressions in the cicatricial tissue. In summary, these results suggest that hydration-controlled NO release from topical PAA:F127/GSNO hydrogels is a potential strategy for enhancing wound healing. STATEMENT OF SIGNIFICANCE: The topical delivery of nitric oxide (NO) to wounds may provide significant beneficial results and represent a promising strategy to treat chronic wounds. However, wound dressings capable of releasing NO after application and allowing the modulation of NO release rates, demand new platforms. Here, we describe a novel strategy to overcome these challenges, based on the use of supramolecular poly(acrylic acid) (PAA):F127 hydrogels charged with the NO donor S-nitrosoglutathione (GSNO) from whereby the NO release can be triggered by exudate absorption and delivered to the wound at rates controlled by the PAA:F127 mass ratio. Preliminary in vivo results offer a proof of concept for this strategy by demonstrating increased angiogenesis; collagen fibers organization; and TGF-ß, IGF-1, SDF-1, and IL-10 gene expressions in the cicatricial tissue after topical treatment with a PAA:F127/GSNO hydrogel.