RESUMO
At present, the upper limb function of stroke patients is often assessed clinically using a scale method, but this method has problems such as time-consuming, poor consistency of assessment results, and high participation of rehabilitation physicians. To overcome the shortcomings of the scale method, intelligent upper limb function assessment systems combining sensors and machine learning algorithms have become one of the hot research topics in recent years. Firstly, the commonly used clinical upper limb functional assessment methods are analyzed and summarized. Then the researches on intelligent assessment systems in recent years are reviewed, focusing on the technologies used in the data acquisition and data processing parts of intelligent assessment systems and their advantages and disadvantages. Lastly, the current challenges and future development directions of intelligent assessment systems are discussed. This review is hoped to provide valuable reference information for researchers in related fields.
Assuntos
Reabilitação do Acidente Vascular Cerebral , Acidente Vascular Cerebral , Algoritmos , Humanos , Modalidades de Fisioterapia , Acidente Vascular Cerebral/diagnóstico , Extremidade SuperiorRESUMO
A software and hardware platform for gait simulation and system evaluation for lower limb intelligent prosthesis is proposed and designed, in order that the wearable symmetry effect of the intelligent knee prosthesis can be quantitatively analyzed by machine test instead of human wear test. The whole-body three-dimensional gait and motion analysis system instrument, a device to collect gait data such as joint angle and stride of adults, was used for extracting simulated gait characteristic curve. Then, the gait curve was fitted based on the corresponding joint to verify the feasibility of the test platform in the experiment. Finally, the developed artificial knee prosthesis was worn on the prosthetic evaluation system to quantitatively analyze the gait symmetry effect. The results showed that there was no significant difference in gait symmetry between the developed knee joints at different speeds, which could reach more than 88%. The simulation and evaluation of the prosthetic gait have good effects on the functional simulation and evaluation of the lower limb intelligent prosthesis.
Assuntos
Marcha , Prótese do Joelho , Adulto , Membros Artificiais , Fenômenos Biomecânicos , Humanos , Articulação do Joelho , Desenho de PróteseRESUMO
The performance of intelligent prosthetic knee has an important effect on the realization of physiological gait of transfemoral amputees. A new type of single axis hydraulic damping knee prosthesis was designed based on the analysis of physiological gait. The training methods of the stance and swing phase were proposed. Knee prosthesis test was done through simulation and measurement device. The control target of peak flexion angle during swing of knee prosthesis is chosen to be 60-70°. When the damper valve closure was 0%, maximum swing-phase knee flexion angle of knee prosthesis were (86±2)°, (91±3)° and (97±3)° with the speed of 0.8 m/s, 1.2 m/s and 1.8 m/s, respectively. Once the valve closure was changed, maximum swing-phase knee flexion angle with different speeds could be adjusted between 60° and 70° and the required valve closure percentage were separately 25%, 40% and 70%. The damping adjustment law of intelligent knee prosthesis to achieve physiological gait was revealed.
RESUMO
With the aging of the society, the number of stroke patients has been increasing year by year. Compared with the traditional rehabilitation therapy, the application of upper limb rehabilitation robot has higher efficiency and better rehabilitation effect, and has become an important development direction in the field of rehabilitation. In view of the current development status and the deficiency of upper limb rehabilitation robot system, combined with the development trend of all kinds of products of the upper limb rehabilitation robot, this paper designed a center-driven upper limb rehabilitation training robot for cable transmission which can help the patients complete 6 degrees of freedom (3 are driven, 3 are underactuated) training. Combined the structure of robot with more joints rehabilitation training, the paper choosed a cubic polynomial trajectory planning method in the joint space planning to design two trajectories of eating and lifting arm. According to the trajectory equation, the movement trajectory of each joint of the robot was drawn in MATLAB. It laid a foundation for scientific and effective rehabilitation training. Finally, the experimental prototype is built, and the mechanical structure and design trajectories are verified.
Assuntos
Braço , Robótica , Reabilitação do Acidente Vascular Cerebral , Braço/fisiopatologia , Humanos , Modalidades de FisioterapiaRESUMO
Introduction: This paper presents the Reconfigurable Multi-Terrain Adaptive Casualty Transport Aid (RMTACTA), an innovative solution addressing the critical need for rapid and safe pre-hospital casualty transport in industrial environments. The RMTACTA, leveraging the Watt II six-bar linkage, offers enhanced adaptability through six modes of motion, overcoming the limitations of traditional stretchers and stretcher vehicles by facilitating navigation across narrow and challenging terrains. Methods: The RMTACTA's design incorporates two branching four-bar mechanisms to form a compact, reconfigurable Watt II six-bar linkage mechanism. This setup is controlled via a single remote rope, allowing for easy transition between its multiple operational modes, including stretcher, stretcher vehicle, folding, gangway-passing, obstacle-crossing, and upright modes. The mechanical design and kinematics of this innovative linkage are detailed, alongside an analysis of the optimal design and mechanical evaluation of rope control. Results: A prototype of the RMTACTA was developed, embodying the proposed mechanical and kinematic solutions. Preliminary tests were conducted to verify the prototype's feasibility and operability across different terrains, demonstrating its capability to safely and efficiently transport casualties. Discussion: The development of the proposed Reconfigurable Multi-Terrain Adaptive Casualty Transport Aid (RMTACTA) introduces a novel perspective on the design of emergency medical transport robots and the enhancement of casualty evacuation strategies. Its innovative application of the Watt II six-bar linkage mechanism not only showcases the RMTACTA's versatility across varied terrains but also illuminates its potential utility in critical scenarios such as earthquake relief, maritime rescue, and battlefield medical support.
RESUMO
PURPOSE: Rehabilitation robots with intent recognition are helping people with dysfunction to enjoy better lives. Many rehabilitation robots with intent recognition have been developed by academic institutions and commercial companies. However, there is no systematic summary about the application of intent recognition in the field of rehabilitation robots. Therefore, the purpose of this paper is to summarize the application of intent recognition in rehabilitation robots, analyze the current status of their research, and provide cutting-edge research directions for colleagues. MATERIALS AND METHODS: Literature searches were conducted on Web of Science, IEEE Xplore, ScienceDirect, SpringerLink, and Medline. Search terms included "rehabilitation robot", "intent recognition", "exoskeleton", "prosthesis", "surface electromyography (sEMG)" and "electroencephalogram (EEG)". References listed in relevant literature were further screened according to inclusion and exclusion criteria. RESULTS: In this field, most studies have recognized movement intent by kinematic, sEMG, and EEG signals. However, in practical studies, the development of intent recognition in rehabilitation robots is limited by the hysteresis of kinematic signals and the weak anti-interference ability of sEMG and EEG signals. CONCLUSIONS: Intent recognition has achieved a lot in the field of rehabilitation robotics but the key factors limiting its development are still timeliness and accuracy.In the future, intent recognition strategy with multi-sensor information fusion may be a good solution.
As a technology, intent recognition can become a part of rehabilitation, assist patients to complete daily life activities, and improve their quality of life.Rehabilitation training equipment for treatment usually adopts a relatively stable prediction method, which aims to stimulate the enthusiasm of users to participate in training.Functionally enhanced rehabilitation aids have high requirements for the timeliness of movement intent recognition, and its purpose is to assist patients to complete activities of daily life.
RESUMO
Computer vision can provide upcoming walking environment information for lower limb-assisted robots, thereby enabling more accurate and robust decisions for high-level control. However, current computer vision systems in lower extremity devices are still constrained by the disruptions that occur in the interaction between human, machine, and the environment, which hinder optimal performance. In this paper, we propose a gimbal-based terrain classification system that can be adapted to different lower limb movements, different walking speeds, and gait phases. We use a linear active disturbance rejection controller to realize fast response and anti-disturbance control of the gimbal, which allows computer vision to continuously and stably focus on the desired field of view angle during lower limb motion interaction. We also deployed a lightweight MobileNetV2 model in an embedded vision module for real-time and highly accurate inference performance. By using the proposed terrain classification system, it can provide the ability to classify and predict terrain independent of mounting position (thighs and shanks), gait phase, and walking speed. This also makes our system applicable to subjects with different physical conditions (e.g., non-disabled subjects and individuals with transfemoral amputation) without tuning the parameters, which will contribute to the plug-and-play functionality of terrain classification. Finally, our approach is promising to improve the adaptability of lower limb assisted robots in complex terrain, allowing the wearer to walk more safely.
Assuntos
Membros Artificiais , Dispositivos Eletrônicos Vestíveis , Humanos , Caminhada/fisiologia , Marcha/fisiologia , Inteligência Artificial , Extremidade Inferior , Fenômenos BiomecânicosRESUMO
Exoskeleton rehabilitation robots have been widely used in the rehabilitation treatment of stroke patients. Clinical studies confirmed that rehabilitation training with active movement intentions could improve the effectiveness of rehabilitation treatment significantly. This research proposes a real-time control method for an upper limb exoskeleton based on the active torque prediction model. To fulfill the goal of individualized and precise rehabilitation, this method has an adjustable parameter assist ratio that can change the strength of the assist torque under the same conditions. In this study, upper limb muscles' EMG signals and elbow angle were chosen as the sources of control signals. The active torque prediction model was then trained using a BP neural network after appropriately extracting features. The model exhibited good accuracy on PC and embedded systems, according to the experimental results. In the embedded system, the RMSE of this model was 0.1956 N·m and 94.98%. In addition, the proposed real-time control system also had an extremely low delay of only 40 ms, which would significantly increase the adaptability of human-computer interactions.
RESUMO
BACKGROUND: During neurological rehabilitation training for patients with lower limb dysfunction, active rehabilitation training based on interactive force recognition can effectively improve participation and efficiency in rehabilitation training. OBJECTIVE: This study proposes an active training strategy for lower-limb rehabilitation robots based on a spring damping model. METHODS: The active training strategy included a kinetic model of the human-machine system, calculated and verified using a pull-pressure force sensor We used a dynamic model of the human-machine system and tensile force sensors to identify the human-machine interaction forces exerted by the patient Finally, the spring damping model is used to convert the active interaction force into the offset angle of each joint, obtaining the active interaction force followed by the active movement of the lower limbsRESULTS:The experimental results showed that the rehabilitation robot could follow the active interaction force of the subject to provide assistance, thus generating the following movement and effectively helping patients improve joint mobility. CONCLUSION: The active flexibility training control strategy based on the virtual spring damping model proposed in this study is feasible, and motion is stable for patients with lower limb dysfunction after stroke Finally, the proposed active training method can be implemented in future work in other rehabilitation equipment and combined virtual reality technology to improve rehabilitation training experience and increase patient participation.
Assuntos
Robótica , Reabilitação do Acidente Vascular Cerebral , Humanos , Extremidade Inferior , Movimento , Reabilitação do Acidente Vascular Cerebral/métodosRESUMO
Introduction: A multi-degree-of-freedom ankle rehabilitation robot with an adjustable workspace has been designed to facilitate ankle joint rehabilitation training. It features a rotation center adapted to the human body, making it suitable for patients with ankle dysfunction following a stroke. Method: In this study, a multi-degree-of-freedom reconfigurable ankle rehabilitation robot (RARR) with adaptable features, based on the principles of ergonomics, has been proposed to cater to the varying needs of patients. This robot offers an adjustable workspace, allowing for different types of ankle joint rehabilitation exercises to be performed. By adjusting the assembly of the RARR, personalized and targeted training can be provided to patients, circumventing issues of redundancy in degrees of freedom during its use. A kinematic model of the robot has been established, and finite element simulation has been employed to analyze the strength of critical components, ensuring the safety of the robot. An experimental platform has been set up to assess the smoothness of the rehabilitation process with RARR, with angle measurements conducted using an Inertial Measurement Unit (IMU). Results and discussion: In conclusion, both simulation and experimental results demonstrate that the robot offers an adjustable workspace and exhibits relatively smooth motion, thereby confirming the safety and effectiveness of the robot. These outcomes align with the intended design goals, facilitating ankle joint rehabilitation and advancing the field of reconfigurable robotics. The RARR boasts a compact structure and portability, making it suitable for various usage scenarios. It is easily deployable for at-home use by patients and holds practical application value for wider adoption in rehabilitation settings.
RESUMO
This paper proposes the conceptual design method for a hybrid-actuated lower limb exoskeleton based on energy consumption simulation. Firstly, the human-machine coupling model is established in OpenSim based on the proposed three passive assistance schemes. On this basis, the method of simulating muscle driving is used to find out the scheme that can reduce the metabolic rate the most with 3 passive springs models. Then, an active-passive cooperative control strategy is designed based on the finite state machine to coordinate the operation of the power mechanism and the passive energy storage structure and improve the mobility of the wearer. In the end, a simulation experiment based on the human-machine coupled model with the addition of active actuation is proceeded to evaluate its assistance performance according to reducing metabolic rate. The results show that the average metabolic cost decreased by 7.2% with both spring and motor. The combination of passive energy storage structures with active actuators to help the wearer overcome the additional consumption of energy storage can further reduce the body's metabolic rate. The proposed conceptual design method can also be utilized to implement the rapid design of a hybrid-actuated lower limb exoskeleton.
Assuntos
Exoesqueleto Energizado , Humanos , Fenômenos Biomecânicos/fisiologia , Caminhada/fisiologia , Extremidade Inferior , Músculo Esquelético/fisiologiaRESUMO
The combination of smart soft composite structure based shape memory alloy (SMA) and exoskeleton technology has the advantages of light weight, energy saving, and great human-exoskeleton interaction. However, there are no relevant studies on the application of SMA-based soft composite structure (SSCS) in hand exoskeletons. The main difficulty is that directional mechanical properties of SSCS need to comply with fingers movement, and SSCS can deliver enough output torque and displacement to the relevant joints. This paper aims to study the application of SSCS for wearable rehabilitation gloves and explore its bionic driving mechanism. This paper proposes a soft wearable glove (Glove-SSCS) for hand rehabilitation actuated by the SSCS, based on finger force analysis under different drive modes. The Glove-SSCS can support five-finger flexion and extension, weighs only 120 g, and adopts modular design. Each drive module adopts a soft composite structure. And the structure integrates actuation, sensing and execution, including an active layer (SMA spring), a passive layer (manganese steel sheet), a sensing layer (bending sensor) and connection layers. To obtain a high-performance SMA actuators, the performance of SMA materials was tested in terms of temperature and voltage, temperature at the shortest length, pre-tensile length and load. And the human-exoskeleton coupling model of Glove-SSCS is established and analyzed from force and motion. The results show that the Glove-SSCS can realize bidirectional movements of fingers flexion and extension, with ranges of motion are 90-110° and 30-40°, and their cycles are 13-19 s and 11-13 s. During the use of Glove-SSCS, the temperature of gloves is from 25 to 67°C, and the surface temperature of hands is from 32 to 36°C. The temperature of Glove-SSCS can be kept at the lowest temperature of SMA operation without much impact on the human body.
RESUMO
[This corrects the article DOI: 10.3389/fnbot.2023.1047493.].
RESUMO
BACKGROUND: Upper-limb rehabilitation robots have become an important piece of equipment in stroke rehabilitation. The design of exoskeleton mechanisms plays a key role to improve human-robot interface in the upper-limb movements under passive and active rehabilitation training. OBJECTIVE: This paper proposes a novel of the 7-DOF (RR-RR-PRR) under-actuated exoskeleton mechanism based on the characteristics of the upper-limb movements in both of active and passive training. This aim of the proposed work is to improve human-robot interface in rehabilitation training with robots. METHODS: Firstly, the characteristics of active and passive movement training are analyzed depending on the human upper-limb model. Then, a novel 7-DOF (RR-RR-PRR) exoskeleton mechanism is proposed based on the analyzed characteristics. After that, kinematical performances of the proposed exoskeleton are analyzed on the workspace, manipulability and manipulability ellipsoid by compared with the common exoskeleton configuration of the 7 DOFs (RRR-R-PRR) mechanism. In the end, the prototype is manufactured and tested by undergoing the experiments of single-joint passive movement training and multi-joint active movement training. The human-robot interface of the proposed exoskeleton is demonstrated by root mean square error, Pearson correlation coefficient, and the time-delay difference. RESULTS: The results of the kinematical performance show that the effective workspace and the flexibility of the exoskeleton with the proposed configuration are increased by 10.44% and 1.7%. In the single-joint passive movement training experiment, the root mean square errors are 6.986, 7.568, 5.846, and Pearson correlation coefficients are 0.989, 0.984, 0.988 at the shoulder joint and the elbow joint, respectively. The time-delay differences are not beyond 3.1%. In the multi-joint active movement training experiment, the root mean square errors are 9.312 and 7.677, and Pearson correlation coefficients are 0.906 and 0.968 at the shoulder joint and the elbow joint, respectively. The time-delay differences are not beyond 3.28%. CONCLUSIONS: The proposed 7 DOFs exoskeleton mechanism shows uniformity with that of the common exoskeleton on the same rehabilitation trajectory which is effective to improve human-robot interface under passive and active rehabilitation training.
Assuntos
Exoesqueleto Energizado , Robótica , Reabilitação do Acidente Vascular Cerebral , Humanos , Movimento , Amplitude de Movimento Articular , Reabilitação do Acidente Vascular Cerebral/métodos , Extremidade SuperiorRESUMO
BACKGROUND: As an emerging exoskeleton robot technology, flexible lower limb exoskeleton (FLLE) integrates flexible drive and wearable mechanism, effectively solving many problems of traditional rigid lower limb exoskeleton (RLLE) such as higher quality, poorer compliance and relatively poor portability, and has become one of the important development directions in the field of active rehabilitation. OBJECTIVE: This review focused on the development and innovation process in the field of FLLE in the past decade. METHOD: Related literature published from 2010 to 2021 were searched in EI, IEEE Xplore, PubMed and Web of Science databases. Seventy target research articles were further screened and sorted through inclusion and exclusion criteria. RESULTS: FLLE is classified according to different driving modes, and the advantages and disadvantages of passive flexible lower limb exoskeletons and active flexible lower limb exoskeletons are comprehensively summarized. CONCLUSION: At present, FLLE's research is mainly based on cable drive, bionic pneumatic muscles followed and matured, and new exoskeleton designs based on smart material innovations also trend to diversify. In the future, the development direction of FLLE will be lightweight and drive compliance, and the multi-mode sensory feedback control theory, motion intention recognition theory and human-machine interaction theory will be combined to reduce the metabolic energy consumption of walking.
Assuntos
Exoesqueleto Energizado , Humanos , Extremidade Inferior/fisiologia , Movimento (Física) , Caminhada/fisiologiaRESUMO
BACKGROUND: Gait analysis is important for the lower limb prosthesis design. Simulating the natural motion of the human knee in different terrains is useful for the design and performance assessment of the prosthetic knee. OBJECTIVE: This study aimed to propose a four-bar knee joint measurement system which can simulate the natural knee motions to collect the kinetic parameters precisely and analyze the walking characteristics under different terrain conditions. METHODS: A low-cost four-bar knee joint mechanism was proposed and gait characteristics were assessed on level ground, ascending and descending stairs, and ascending and descending ramp. RESULTS: The initial knee flexion angle during stair ascent at heel strike is obviously larger than in other walking scenes. The stance phase accounts for 53% of a single gait cycle during stair descent, which is slightly lower than other walking scenarios. The period that both the hindfoot and forefoot contact the ground in ramp descent accounts for 18%, which is less than for the others. While the forefoot contacts the ground in ramp ascent, the maximum vertical ground reaction force of the forefoot occurs when the hindfoot and forefoot simultaneously contact the ground, whereas in other scenarios the forefoot contacts the ground solely. CONCLUSIONS: The four-bar knee joint can simulate the natural motion of the human knee accurately. The gait characteristics analysis of different walking scenarios indicated that the low-cost four-bar knee joint exoskeleton was suitable for human knee joint simulation.
Assuntos
Articulação do Joelho , Caminhada , Fenômenos Biomecânicos , Marcha , Humanos , Desenho de PróteseRESUMO
BACKGROUND: Hip disarticulation prostheses (HDPs) are not routinely seen in clinical practice, and traditional hip prostheses rotate around an axis at the front side of the pelvic socket. OBJECTIVE: This study proposes a mechanism to restore the rotation center to the acetabulum of the amputated side and uses comparative experiments with traditional HDP to verify the validity of the novel design. METHODS: A double parallelogram design of HDP based on a remote center of motion (RCM) mechanism was presented in this paper. Optimization was achieved by a genetic algorithm with the maximal integral size and minimal driving force of the mechanism. RESULTS: The prototype was developed by final optimal results and tested by a hip disarticulated amputee. Testing results revealed that the RCM-HDP improved the range of motion of the hip prosthesis by 78%. The maximal flexion of the assorted prosthetic knee was closer to the sound side than a traditional HDP by 15%. CONCLUSION: The proposed RCM-HDP promoted the kinematic performance and symmetry of the hip prosthesis compared to the traditional design.
Assuntos
Amputados , Artroplastia de Quadril , Membros Artificiais , Prótese de Quadril , Desarticulação , Humanos , Desenho de PróteseRESUMO
BACKGROUND: Stroke and other neurological disorders have an effect on mobility, which has a significant impact on independence and quality of life. The core rehabilitation requirements for patients with lower limb motor dysfunction are gait training, re-stand and mobility. OBJECTIVE: A wheelchair called ReChair was invented that seamlessly integrated mobility, gait training and multi-posture transformation with voice control. METHODS: The mechanical structure and control system of ReChair were designed. The overall evaluation included voice recognition and balance training test to quantitatively verify the performance of ReChair. RESULTS: The average success recognition rate of posture transformation by voice control can reach 91% to 96% in a quiet environment (20-30 DB). The balance training game is easy to operate and the score can be used as a quantified guideline for rehabilitation. CONCLUSION: The proposed rehabilitation wheelchair can realize multi-posture transformation and balance training by the voice control system.
Assuntos
Reabilitação do Acidente Vascular Cerebral , Acidente Vascular Cerebral , Cadeiras de Rodas , Humanos , Extremidade Inferior , Equilíbrio Postural , Postura , Qualidade de VidaRESUMO
BACKGROUND: Upper limb rehabilitation robots have become an important piece of equipment in stroke rehabilitation. Human-robot coupling (HRC) dynamics play a key role in the control of rehabilitation robots to improve human-robot interaction. OBJECTIVE: This study aims to study the methods of modeling and analysis of HRC dynamics to realize more accurate dynamic control of upper limb rehabilitation robots. METHODS: By the analysis of force interaction between the human arm and the upper limb rehabilitation robot, the HRC torque is achieved by summing up the robot torque and the human arm torque. The HRC torque and robot torque of a 2-DOF upper limb rehabilitation robot (FLEXO-Arm) are solved by Lagrangian equation and step-by-step dynamic parameters identification method. RESULTS: The root mean square (RMS) is used to evaluate the accuracy of the HRC torque and the robot torque calculated by the parameter identification, and the error of both is about 10%. Moreover, the HRC torque and the robot torque are compared with the actual torque measured by torque sensors. The error of the robot torque is more than twice the HRC. Therefore, the HRC torque is more accurate than the actual torque. CONCLUSIONS: The proposed HRC dynamics effectively achieves more accurate dynamic control of upper limb rehabilitation robots.
Assuntos
Robótica , Reabilitação do Acidente Vascular Cerebral , Humanos , Extremidade SuperiorRESUMO
BACKGROUND: A prosthetic knee is the key component of the transfemoral prosthesis. The performance of the prosthetic knee determines the walking ability of transfemoral amputees. OBJECTIVE: This study proposes a microprocessor-controlled prosthetic knee with a novel hydraulic damper and evaluates the performance of the prosthetic knee by gait symmetry index. METHODS: The homotaxial knee joint with electrical-controlled hydraulic cylinder which adjusts knee flexion and extension damping independently and continuously by single motor was designed. Gait symmetry tests under different walking speeds (0.6 m/s, 1.1 m/s and 1.6 m/s) were conducted to evaluate the performance of the proposed microprocessor-controlled prosthetic knee. RESULTS: The symmetry index values indicated that the stance phase was more asymmetry than swing phase. In the swing phase, the knee angle symmetry was observed in different speeds. The number values of symmetry index were smaller than 15% in swing phase. CONCLUSIONS: The proposed microprocessor-controlled prosthetic knee could meet the demands of walking.