RESUMO
Approximately 50 child sarcomas are treated with limb salvage surgery each year in the United Kingdom. These children need an extendable implant that can be lengthened periodically to keep pace with the growth in the opposite limb. Surgically, invasive devices have been used for the past 30 years with intrinsic problems of infection and long-term recurrent trauma to the patient. To eliminate problems associated with the invasive device, a noninvasive extendable prosthesis was developed. The magnetically coupled drive technology used for this prosthesis was a synchronous motor with a gear-driven telescoping shaft. In this design the motor configuration was in two parts: a rotating magnet (rotor) that fitted inside the prosthesis where space was limited and the stator, which was an external device used to extend the prosthesis remotely as the patient grew. This compact external drive produced a focused magnetic flux that required no cooling and operated on a single-phase power supply. The extending mechanism in the implant was able to overcome up to 1300 N force, which is the tension force exerted by the soft tissues during the lengthening procedure. The device has been successfully implanted in 50 patients.
Assuntos
Neoplasias Ósseas/reabilitação , Magnetismo/instrumentação , Magnetismo/uso terapêutico , Desenho de Prótese , Dispositivos para Expansão de Tecidos , Adolescente , Engenharia Biomédica/métodos , Neoplasias Ósseas/cirurgia , Criança , Análise de Falha de Equipamento , Humanos , Salvamento de Membro/reabilitação , Implantação de Prótese , Expansão de Tecido/instrumentaçãoRESUMO
We report our early experience with the use of a non-invasive distal femoral expandable endoprosthesis in seven skeletally immature patients with osteosarcoma of the distal femur. The patients had a mean age of 12.1 years (9 to 15) at the time of surgery. The prosthesis was lengthened at appropriate intervals in outpatient clinics, without anaesthesia, using the principle of electromagnetic induction. The patients were functionally evaluated using the Musculoskeletal Tumour Society scoring system. The mean follow-up was 20.2 months (14 to 30). The prostheses were lengthened by a mean of 25 mm (4.25 to 55) and maintained a mean knee flexion of 110 degrees (100 degrees to 120 degrees ). The mean Musculoskeletal Tumour Society score was 68% (11 to 29). Complications developed in two patients; one developed a flexion deformity of 25 degrees at the knee joint, which was subsequently overcome and one died of disseminated disease. The early results from patients treated with this device have been encouraging. The implant avoids multiple surgical procedures, general anaesthesia and assists in maintaining leg-length equality.
Assuntos
Neoplasias Femorais/cirurgia , Fêmur/cirurgia , Salvamento de Membro/instrumentação , Osteossarcoma/cirurgia , Próteses e Implantes , Adolescente , Criança , Feminino , Neoplasias Femorais/fisiopatologia , Humanos , Articulação do Joelho/fisiopatologia , Salvamento de Membro/métodos , Masculino , Procedimentos Cirúrgicos Minimamente Invasivos/métodos , Osteossarcoma/fisiopatologia , Complicações Pós-Operatórias , Desenho de Prótese , Implantação de Prótese/métodos , Resultado do TratamentoRESUMO
As the number of primary and revision arthroplasties performed each year increases, the complexity of the reconstructive efforts also increases. A case of a patient with a total knee arthroplasty complicated with infection, deficient extensor mechanism, bone loss and limb shortening of 5.5 cm is reported. We describe an alternative surgical technique of reconstruction of the knee and lengthening of the limb using the Stanmore Non-Invasive Growing-Distal Femoral Prosthesis. The prosthesis had a magnetic disc attached to a gearbox. The generation of an external electromagnetic field caused the magnetic disc to rotate and lengthen the prosthesis. This reconstructive technique has not been described in the literature.
Assuntos
Artrodese/instrumentação , Artrodese/métodos , Artroplastia do Joelho/instrumentação , Artroplastia do Joelho/métodos , Tíbia , Antibacterianos/uso terapêutico , Alongamento Ósseo/métodos , Fenômenos Eletromagnéticos , Humanos , Artropatias/tratamento farmacológico , Artropatias/microbiologia , Articulação do Joelho/microbiologia , Articulação do Joelho/fisiopatologia , Masculino , Pessoa de Meia-Idade , Complicações Pós-Operatórias/prevenção & controle , Complicações Pós-Operatórias/terapia , Próteses e Implantes , ReoperaçãoRESUMO
AIMS: Surgeons have commonly used modular femoral heads and stems from different manufacturers, although this is not recommended by orthopaedic companies due to the different manufacturing processes. We compared the rate of corrosion and rate of wear at the trunnion/head taper junction in two groups of retrieved hips; those with mixed manufacturers (MM) and those from the same manufacturer (SM). MATERIALS AND METHODS: We identified 151 retrieved hips with large-diameter cobalt-chromium heads; 51 of two designs that had been paired with stems from different manufacturers (MM) and 100 of seven designs paired with stems from the same manufacturer (SM). We determined the severity of corrosion with the Goldberg corrosion score and the volume of material loss at the head/stem junction. We used multivariable statistical analysis to determine if there was a significant difference between the two groups. RESULTS: We found no significant difference in the corrosion scores of the two groups. The median rate of material loss at the head/stem junction for the MM and SM groups were 0.39 mm(3)/year (0.00 to 4.73) and 0.46 mm(3)/year (0.00 to 6.71) respectively; this difference was not significant after controlling for confounding factors (p = 0.06). CONCLUSION: The use of stems with heads of another manufacturer does not appear to affect the amount of metal lost from the surfaces between these two components at total hip arthroplasty. Other surgical, implant and patient factors should be considered when determining the mechanisms of failure of large diameter metal-on-metal hip arthroplasties. Cite this article: Bone Joint J 2016;98-B:917-24.
Assuntos
Artroplastia de Quadril , Corrosão , Prótese de Quadril , Próteses Articulares Metal-Metal , Desenho de Prótese , Falha de Prótese , Adulto , Idoso , Cromo , Ligas de Cromo , Cobalto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , TitânioRESUMO
The aim of this study was to assess the effect of frictional torque and bending moment on fretting corrosion at the taper interface of a modular femoral component and to investigate whether different combinations of material also had an effect. The combinations we examined were 1) cobalt-chromium (CoCr) heads on CoCr stems 2) CoCr heads on titanium alloy (Ti) stems and 3) ceramic heads on CoCr stems. In test 1 increasing torque was imposed by offsetting the stem in the anteroposterior plane in increments of 0 mm, 4 mm, 6 mm and 8 mm when the torque generated was equivalent to 0 Nm, 9 Nm, 14 Nm and 18 Nm. In test 2 we investigated the effect of increasing the bending moment by offsetting the application of axial load from the midline in the mediolateral plane. Increments of offset equivalent to head + 0 mm, head + 7 mm and head + 14 mm were used. Significantly higher currents and amplitudes were seen with increasing torque for all combinations of material. However, Ti stems showed the highest corrosion currents. Increased bending moments associated with using larger offset heads produced more corrosion: Ti stems generally performed worse than CoCr stems. Using ceramic heads did not prevent corrosion, but reduced it significantly in all loading configurations.
Assuntos
Artroplastia de Quadril/instrumentação , Prótese de Quadril , Falha de Prótese , Materiais Biocompatíveis , Cerâmica , Cromo , Cobalto , Corrosão , Análise de Falha de Equipamento , Fêmur/cirurgia , Fricção , Humanos , Teste de Materiais , Desenho de Prótese , Titânio , TorqueRESUMO
Two proximal femoral replacements were instrumented to enable axial forces to be determined at two sites within the prosthesis: in the main shaft and near the tip of the intramedullary stem. The goal was to measure the changes in force distribution over time, as indicated by the ratio of the two forces. Inductive coupling between a coil worn around the leg and a small implanted coil was used, both to supply power to electronic circuits sealed into a welded cavity in the prosthesis and to telemeter data from the prosthesis. Data from both subjects were recorded over the first two years following surgery. For the first subject, there was an increase in mean shaft force excursions (peak force minus resting force) during level walking from 0.53 x BW after 1 week 2.77 x BW after 23 months. The corresponding mean tip force excursions were 0.13 x BW and 1.74 x BW, respectively. The ratio of mean tip force excursions to shaft force excursions steadily increased over the same period from 25 to 63%. Similar increases over time in the tip/shaft ratio were found during treadmill walking, stair climbing and stair descending. Data from the second subject were obtained for the shaft forces only, and were consistent with those from the first subject. The progressive transfer of axial load from the proximal to the distal part of the IM stem recorded telemetrically, together with radiographic observations, suggested that bone remodelling had taken place together with a less stable interface around the proximal part of the stem. This process evidently began soon after implantation.
Assuntos
Fêmur , Próteses e Implantes , Telemetria , Ciclismo/fisiologia , Remodelação Óssea , Calibragem , Cimentação , Condrossarcoma/cirurgia , Eletrônica Médica/instrumentação , Desenho de Equipamento , Neoplasias Femorais/cirurgia , Fêmur/diagnóstico por imagem , Fêmur/cirurgia , Seguimentos , Marcha/fisiologia , Tumor de Células Gigantes do Osso/cirurgia , Humanos , Masculino , Pessoa de Meia-Idade , Projetos Piloto , Radiografia , Estresse Mecânico , Propriedades de Superfície , Fatores de Tempo , Caminhada/fisiologia , Suporte de Carga/fisiologiaRESUMO
Using an instrumented distraction tool 34 extendible endoprosthetic replacements were lengthened to measure total resistance to extension. The study consisted of 19 distal femoral, 2 proximal femoral, 1 total femoral, 8 proximal tibial, 1 distal humeral, 2 proximal humeral and 1 total humeral replacements. Among these prostheses a total of 76 measurements were made. The initial load on the prosthesis due to soft tissues and muscles varied between 0 and 578 N with an overall mean of 128 N. There was a linear relationship between extension and load. At 6 mm extension the load varied between 42 and 1513 N with a mean of 476 N. There was very little difference between the means of femoral and tibial measurements. There was very little resistance to extension in the total humeral replacement due to the absence of glenoid and muscle attachment. In the distal humeral replacement all three measurements were comparable with the forces in proximal tibial replacements. Two cases showed very high resistance to extension, which was mainly attributed to the presence of large amounts of scar tissues observed at surgery. During one lengthening operation a 30 s pause at 1 mm increments from 0 to 9 mm showed load recovery of approximately 10 per cent for up to 3 mm, beyond which there appeared to be stiffening of tissues.
Assuntos
Fêmur/cirurgia , Úmero/cirurgia , Implantação de Prótese/instrumentação , Terapia de Salvação/métodos , Tíbia/cirurgia , Adolescente , Neoplasias Ósseas/cirurgia , Calibragem , Criança , Pré-Escolar , Elasticidade , Fêmur/crescimento & desenvolvimento , Humanos , Úmero/crescimento & desenvolvimento , Desenho de Prótese , Falha de Prótese , Análise de Regressão , Reoperação , Estresse Mecânico , Tíbia/crescimento & desenvolvimento , Suporte de CargaRESUMO
INTRODUCTION: Partial resurfacing of the humeral head has been reported in humans to treat humeral osteochondritis dissecans. The aim is to describe a custom-made humeral resurfacing prosthesis for treatment of severe humeral head osteochondritis disse-cans in a dog. CASE REPORT: A seven-month-old female entire St. Bernard dog was presented with a 10 week history of severe left thoracic limb lameness. Radiography, arthroscopy and magnetic resonance imaging confirmed an extensive osteochondritis dissecans lesion affecting the caudal, medial and central regions of the humeral head. A prosthesis designed from computed tomography (CT) images was manufactured in polished stainless steel alloy with a hydroxyapatite coated base and central finned humeral stem for cementless insertion. A standard caudal approach to the shoulder was used to place the prosthesis following reaming of the caudal humeral head. RESULTS: Radiography and CT imaging revealed appropriate topographical placement on the humerus. Force plate analysis demonstrated initial reduction in ground reaction force at six weeks, followed by gradual improvement at three months. There was no radiographic evidence of implant loosening and the range of shoulder joint motion was comparable to the contralateral joint at three months; these findings were maintained to final follow-up at 24 months. CLINICAL SIGNIFICANCE: Placement of a humeral head resurfacing prosthesis was an effective technique for the management of severe osteochondritis dissecans-related shoulder lameness. To the authors' knowledge, this is the first report of the clinical use of shoulder hemiarthroplasty in a dog.
Assuntos
Doenças do Cão/patologia , Membro Anterior/cirurgia , Hemiartroplastia/veterinária , Artropatias/veterinária , Osteocondrite Dissecante/veterinária , Animais , Cães , Feminino , Artropatias/cirurgia , Osteocondrite Dissecante/cirurgia , Resultado do TratamentoRESUMO
In skeletally immature patients, resection of bone tumours and reconstruction of the lower limb often results in leg-length discrepancy. The Stanmore non-invasive extendible endoprosthesis, which uses electromagnetic induction, allows post-operative lengthening without anaesthesia. Between 2002 and 2009, 55 children with a mean age of 11.4 years (5 to 16) underwent reconstruction with this prosthesis; ten patients (18.2%) died of disseminated disease and one child underwent amputation due to infection. We reviewed 44 patients after a mean follow-up of 41.2 months (22 to 104). The mean Musculoskeletal Tumor Society score was 24.7 (8 to 30) and the Toronto Extremity Salvage score was 92.3% (55.2% to 99.0%). There was no local recurrence of tumour. Complications developed in 16 patients (29.1%) and ten (18.2%) underwent revision. The mean length gained per patient was 38.6 mm (3.5 to 161.5), requiring a mean of 11.3 extensions (1 to 40), and ten component exchanges were performed in nine patients (16.4%) after attaining the maximum lengthening capacity of the implant. There were 11 patients (20%) who were skeletally mature at follow-up, ten of whom had equal leg lengths and nine had a full range of movement of the hip and knee. This is the largest reported series using non-invasive extendible endoprostheses after excision of primary bone tumours in skeletally immature patients. The technique produces a good functional outcome, with prevention of limb-length discrepancy at skeletal maturity.
Assuntos
Alongamento Ósseo/instrumentação , Neoplasias Ósseas/cirurgia , Extremidade Inferior/cirurgia , Próteses e Implantes , Adolescente , Alongamento Ósseo/métodos , Criança , Pré-Escolar , Feminino , Fêmur/diagnóstico por imagem , Fêmur/cirurgia , Seguimentos , Crescimento , Humanos , Articulação do Joelho/fisiopatologia , Desigualdade de Membros Inferiores/etiologia , Desigualdade de Membros Inferiores/prevenção & controle , Salvamento de Membro/métodos , Masculino , Desenho de Prótese , Implantação de Prótese/efeitos adversos , Implantação de Prótese/métodos , Radiografia , Amplitude de Movimento Articular , Reoperação/métodos , Tíbia/diagnóstico por imagem , Tíbia/cirurgia , Resultado do TratamentoRESUMO
We describe the application of a non-invasive extendible endoprosthetic replacement in skeletally-mature patients undergoing revision for failed joint replacement with resultant limb-length inequality after malignant or non-malignant disease. This prosthesis was developed for tumour surgery in skeletally-immature patients but has now been adapted for use in revision procedures to reconstruct the joint or facilitate an arthrodesis, replace bony defects and allow limb length to be restored gradually in the post-operative period. We record the short-term results in nine patients who have had this procedure after multiple previous reconstructive operations. In six, the initial reconstruction had been performed with either allograft or endoprosthetic replacement for neoplastic disease and in three for non-neoplastic disease. The essential components of the prosthesis are a magnetic disc, a gearbox and a drive screw which allows painless lengthening of the prosthesis using the principle of electromagnetic induction. The mean age of the patients was 37 years (18 to 68) with a mean follow-up of 34 months (12 to 62). They had previously undergone a mean of six (2 to 14) open procedures on the affected limb before revision with the non-invasive extendible endoprosthesis. The mean length gained was 56 mm (19 to 107) requiring a mean of nine (3 to 20) lengthening episodes performed in the outpatient department. There was one case of recurrent infection after revision of a previously infected implant and one fracture of the prosthesis after a fall. No amputations were performed. Planned exchange of the prosthesis was required in three patients after attainment of the maximum lengthening capacity of the implant. There was no failure of the lengthening mechanism. The Mean Musculoskeletal Tumour Society rating score was 22 of 30 available points (18 to 28). The use of a non-invasive extendible endoprosthesis in this manner provided patients with good functional results and restoration of leg-length equality, without the need for multiple open lengthening procedures.