Effects of Removable Functional Appliances on the Dentoalveolar Unit in Growing Patients.

Background and Objectives: The objective of this retrospective controlled study is to compare class II growing patients who underwent treatment with two different functional appliances: the Fraenkel regulator (FR-2), utilized as the control group, and the elastodontic device "Cranium Occluded Postural Multifunctional Harmonizers" (AMCOP), utilized as the test group. Materials and Methods: The study sample consisted of 52 patients with class II division I malocclusion (30 males, 22 females, mean age 8.6 ± 1.4 years) who were treated with the two different types of appliances: Group 1 (n = 27, mean age 8 [7.00, 9.00] years, 12 females, 15 males) received treatment with AMCOP, while Group 2 (n = 25, mean age 9.2 years [8.20, 10.00], 10 females, 15 males) received treatment with FR-2. The mean treatment duration for Group 1 was 28.00 [21.50, 38.00] months, while for Group 2 it was 23.70 [17.80, 27.40] months. Cephalometric analyses were performed on lateral cephalograms taken before treatment (T1) and after treatment (T2). Results: Significant intragroup differences were observed over time in Group 1 for 1^/PP. Similarly, significant intragroup differences were observed over time in Group 2 for SNB, ANB, and IMPA. Conclusions: Both treatment modalities resulted in the correction of class II malocclusion with dentoalveolar compensation, although the treatment duration with AMCOP tended to be longer on average.

Three-dimensional comparison of bone-borne and tooth-bone-borne maxillary expansion in young adults with maxillary skeletal deficiency.

OBJECTIVE: To compare the transverse dental and skeletal changes in patients treated with bone-anchored palatal expander (bone-borne, BB) compared to patients treated with tooth and bone-anchored palatal expanders (tooth-bone-borne, TBB) using cone-beam computer tomography (CBCT) and 3D image analysis. METHODS: The sample comprised 30 patients with transverse maxillary discrepancy treated with two different types of appliances: bone-borne (Group BB) and tooth-bone-borne (Group TBB) expanders. CBCT scans were acquired before (T1) and after completion of maxillary expansion (T2); the interval was 5.4 ± 3.4 and 6.2 ± 2.1 months between the T1 and the T2 scans of Group TBB (tooth-bone-borne) and Group BB (bone-borne), respectively. Transverse, anteroposterior and vertical linear and angular three-dimensional dentoskeletal changes were assessed after cranial base superimposition. RESULTS: Both groups displayed marked transverse skeletal expansion with a greater ratio of skeletal to dental changes. Greater changes at the nasal cavity, zygoma and orbital levels were found in Group BB. A relatively parallel sutural opening in an anterior-posterior direction was observed in Group TBB; however, the Group BB presented a somewhat triangular (V-shaped) opening of the suture that was wider anteriorly. Small downward-forward displacements were observed in both groups. Asymmetric expansion occurred in approximately 50% of the patients in both groups. CONCLUSION: Greater skeletal vs dental expansion ratio and expansion of the circummaxillary regions were found in Group BB, the group in which a bone-borne expander was used. Both groups presented skeletal and dental changes, with a similar amount of posterior palate expansion. Asymmetric expansion was observed in both groups.

Accuracy Of Imaging Software for 3d Rendering of Tooth Structures, Usable in Clinical Settings.

AIM: The aim of this study was to evaluate the segmentation accuracy of dentition testing four free-source semi-automatic software. MATERIALS AND METHODS: A total of 20 cone-beam computed tomography (CBCT) were selected to perform semi-automatic segmentation of maxillary and mandibular dentition. The software tested were Invesalius, ITK-Snap, 3D Slicer and Seg3D. Each tooth model was also manually segmented (Mimics software) and set as the gold standard (GS) reference of the investigation. A specific 3D imaging technology was used to perform the superimposition between the teeth models obtained with semi-automatic software and the GS model, and to perform the surface-to-surface matching analysis. The accuracy of semi-automatic segmentation was evaluated calculating the volumetric mean differences (mean bias and limits of agreement) and the percentage of matching of the tooth models compared to the manual segmentation (GS). Qualitative assessments were performed using color-coded maps. All data were statistically analysed to perform software comparisons. RESULT: Statistically significant differences were found in the volumetric and matching percentage data (p < 0,05). Invesalius was the most accurate software for 3D rendering of the dentition with a volumetric bias (Mimics) ranging from 4,59 mm3 to 85,79 mm3; instead, ITK-SNAP showed the higher volumetric bias, ranging from 30,22 mm3 to 319,83 mm3. The dis-matched area was mainly located at the radicular region of the teeth. Volumetric data showed excellent inter-software reliability with coefficient values ranging from 0,951 to 0,997. CONCLUSIO: Different semi-automatic software algorithms could generate different patterns of inaccuracy error in the segmentation of teeth.

Impact of Periodontitis on Glycemic Control and Metabolic Status in Diabetes Patients: Current Knowledge on Early Disease Markers and Therapeutic Perspectives.

Diabetes mellitus and periodontitis are two of the most common chronic diseases affecting the world's population, and they are intimately linked. For several years, in fact, it has been known that there is an interdependent relationship between the two diseases: Diabetes promotes the destruction of periodontal tissues, and periodontal disease negatively affects glycemic control. In relation to the control of dental plaque and oral dysbiosis responsible for periodontal disease, both nonsurgical and surgical therapy associated with proper home hygiene procedures have emerged as essential for good glycemic control. Moreover, several evidences suggest the essential role played by the control of periodontal disease in preventing the onset of the most common complications of diabetes: cardiovascular diseases, retinopathies, and other systemic diseases. The aim of this study is to update the current knowledge on the bi-univocal relationship between diabetes and periodontitis and the impact of therapy in the optimal management of these two disorders. From the information found in the literature, it has emerged that the correct treatment of periodontal disease in diabetic patients represents one of the main mechanisms and means currently established and valid to control periodontal disease and glucose metabolism and prevent the onset or development of diabetic complications.

Accuracy of direct insertion of TADs in the anterior palate with respect to a 3D-assisted digital insertion virtual planning.

BACKGROUND: Direct and 3D-assisted methods are an available alternative when inserting temporary anchorage devices (TADs) in the anterior palate for orthodontic anchorage. This study aimed to evaluate the differences between a planned insertion versus a direct method on digital models. SETTINGS AND SAMPLE POPULATION: Seventy TADs were inserted by the direct insertion method in 35 patients who needed palatal TADs for orthodontic anchorage. For each patient, placement was independently planned by the superimposition of lateral cephalograms and corresponding plaster models. After mini-implant placement, impressions were taken with scanbodies. For the measurement of both linear and angle deviations, virtual planning models and postoperative oral scans were compared using 3D software for automatic surface registration and calculations. RESULTS: Comparing TADs positioned by the direct method and the digitally planned method, a mean linear distance was found of 2.54 ± 1.51 mm in the occlusal view and 2.41 ± 1.33 mm in the sagittal view. No significant difference has been found between TADs positioned in the right and left palatal sides. A mean distance of 7.65 ± 2.16 mm was found between the tip of the digitally planned TAD and the central incisors root apex. CONCLUSIONS: Both direct and 3D-assisted TAD insertion methods are safe and accurate in the anterior palate. However, the use of insertion guides facilitates TAD insertion, allowing less-experienced clinicians to use palatal implants.

Does the planned miniscrew position reflect the achieved one? A clinical study on the reliability of guided miniscrew insertion using lateral cephalogram and maxillary stereolithography file for planning.

INTRODUCTION: The anterior area of the palate is widely used as an insertion site for orthodontic miniscrews. These temporary anchorage devices can be placed either directly or using an insertion guide, and various kinds of digital planning and guides are currently available. This study aimed to verify if the guided procedure can guarantee the correct position of the miniscrews on the patient compared with the digital project. METHODS: Twenty-five consecutively treated patients were included in the study. Angular and linear displacements of the miniscrews were evaluated among 3 groups: the planned position, the model position, and the achieved position. RESULTS: The median achieved angle between 2 digitally planned screws was 6.22° (interquartile range: 4.35°, 9.08°) and the difference between the angles in the planning and the achievement groups was significant (P <0.001). Lateral and vertical differences were also found among the 3 groups. CONCLUSIONS: Results show that the examined workflow is clinically efficient. Differences between the digitally planned position of the orthodontic miniscrews, the control position, and the achieved position were detected both for angular and linear measurements but were not clinically significant.

Success rate of surface-treated and non-treated orthodontic miniscrews as anchorage reinforcement in the lower arch for the Herbst appliance: A single-centre, randomised split-mouth clinical trial.

BACKGROUND: Surface treatment of miniscrews was implemented to determine whether its application increased bone-to-surface contact and enhanced the interlock between the device and the surrounding bone. OBJECTIVES: To compare the success rate of surface-treated and non-treated orthodontic miniscrews used as reinforcement of anchorage during treatment with the Herbst appliance. TRIAL DESIGN: Split-mouth design with an allocation ratio of 1:1. METHODS: Eligibility criteria to enrol patients were skeletal and dental class II patients with a retrusive chin, use of the Herbst appliance to correct malocclusion, need for skeletal anchorage using a miniscrew both in the left and right side of the mouth, absence of systemic diseases, absence of using drugs that alter bone metabolism, and good oral hygiene. Patients received self-drilling miniscrews without surface treatment and with surface treatment. Both types presented a 1.4 or 1.2 mm diameter. Miniscrews were inserted between the first molar and second premolars or between the two premolars. The force applied to the screws was an elastic chain from the head of the miniscrews to a direct button applied on the canines. The success rate of each type of miniscrew was considered the primary outcome, and the association of success with demographical, clinical, and geometrical characteristics was investigated. Differences were tested by the generalised linear mixed effects model for the split-mouth design. Differences with a P-value < 0.05 were selected as significant. RANDOMISATION: A randomisation list was created for the mouth side assignment. BLINDING: The study was single blinded with regard to the statistical analysis. RESULTS: Thirty-nine miniscrews of the non-treated type and 39 miniscrews of the surface-treated type were inserted in 39 patients (23 female and 16 male, mean age: 15.55 ± 7.91) recruited between March 2018 and December 2020 with a split-mouth study design. The mean therapy duration was 9.3 months (SD = 1.31). No differences in failure rate were observed between miniscrew types. No serious harm was observed. CONCLUSIONS: The success rate of surface-treated and non-treated miniscrews showed no significant differences. REGISTRATION: This trial was not registered.

Evaluation of palatal bone depth, cortical bone, and mucosa thickness for optimal orthodontic miniscrew placement performed according to the third palatal ruga clinical reference.

OBJECTIVES: This retrospective CBCT study aimed to evaluate the palatal anatomical characteristics using the third palatal ruga as a reliable clinical reference for miniscrew placement. METHODS: Thirty-six subjects (mean age17.1 y.o. ± 4.1) were randomly selected and their records (CBCT volume and maxillary digital models) were included.BlueSkyPlan CBCT software viewer (BluSkyBio, V4.7) was used to measure the following outcomes at the level of third palatal ruga, 2 mm anteriorly and 2 mm posteriorly: total bone depth, cortical bone thickness, and mucosa thickness. The outcomes were evaluated on lines perpendicular to the palatal mucosa laying on different sagittal planes: the mid-palatal plane, 2 and 4 mm paramedian planes. RESULTS: The maximum mean amount of bone depth was registered 2 mm posteriorly to the third ruga and 4 mm paramedian (9.7 mm). No significant difference was observed between the third ruga insertion site and its corresponding 2 mm posterior site. Cortical bone of palatal vault did not change significantly in anteroposterior direction for all the considered sites. Significant differences were found comparing cortical bone at the suture level with cortical bone 2-mm and 4-mm paramedian at all anteroposterior levels. Palatal mucosa increases its thickness in paramedian insertion sites, and it decreases in posterior insertion sites. CONCLUSIONS: Both third palatal ruga and 2 mm posteriorly to third ruga (4 mm paramedian) could be the optimal insertion site for palatal miniscrew placement, depending on individual anatomic conditions. The thickness of the cortical palatal bone showed, at 4 mm paramedian, optimal characteristics for miniscrew primary stability. Palatal mucosa thickness values suggest miniscrew neck extension of 2.0-2.5 mm for optimal mucosa adaptation.

Maximum insertion torque loss after miniscrew placement in orthodontic patients: A randomized controlled trial.

OBJECTIVES: To compare torque recordings of immediately loaded orthodontic miniscrews between insertion time and different post-placement timepoints (2 weeks, 4 weeks and removal time, respectively). SETTING AND SAMPLE POPULATION: Parallel trial with an allocation ratio of 1:1. Eligibility criteria were needs of fixed orthodontic treatment, no systemic disease and absence of using drugs altering bone metabolism. MATERIAL AND METHODS: Patients received miniscrews, 2.0 mm diameter and 10 mm length. All miniscrews underwent inter-radicular placement, and they were placed in the maxilla or in the mandible, palatally or buccally. No pre-drilling was performed. Miniscrews were loaded immediately after the insertion and were used for distalization, intrusion, extrusion, mesialization or indirect anchorage. Patients were randomly divided into three groups. For each patient, Maximum Insertion Torque (MIT) was evaluated at baseline. MIT was measured again after 2 weeks and after 4 weeks by tightening the screw a quarter of turn in Groups 1 and 2, respectively. At the end of the treatment, maximal removal torque was evaluated in Group 3. Torque variation with respect to insertion time was considered as the primary outcome. Baseline and longitudinal differences were tested using the linear mixed-effects (LME) model. RESULTS: Forty seven patients and 74 miniscrews were followed up. An association existed between maximum insertion torque and the observation time. A torque decrease of 26.9% and 30% after 2 weeks was observed for mandibular and maxillary miniscrews, respectively. After 1 month, torque values were similar to the baseline records. The overall success rate was 79.7%. No serious harm was observed. CONCLUSIONS: Maximum insertion torque undergoes a loss during the first 2 weeks, and its values may depend on the insertion site and the anchorage purpose. Removal torque value is almost the same as the initial torque after 1 month.

Skeletal and dental changes after maxillary expansion with a bone-borne appliance in young and late adolescent patients.

INTRODUCTION: Rapid palatal expansion is a common therapy during orthodontic treatment and could be a preliminary step for correcting different malocclusions; furthermore, this treatment could be necessary at any age. Different anchorage approaches have been proposed to obtain an effective skeletal result, although every device produces both dental and skeletal effects. This study aimed to compare the dentoskeletal effects of a bone-borne palatal expander considering 2 groups of patients of different ages. METHODS: Twenty-four patients consecutively treated were included in the study; patients were divided into 2 groups according to their age: group 1 with age ≤16 years and group 2 patients >16 years. All patients had a preexpansion cone-beam computed tomography scan; a second scan was required at the end of activations. All patients received a bone-borne appliance anchored on 4 miniscrews. RESULTS: Significant intragroup differences were found for maxillary width and dental diameters. No significant differences were found between groups with regard to longitudinal changes, except for the maxillary right plane. CONCLUSIONS: The use of bone-borne maxillary expansion was effective in generating palatal widening both in growing and young adult patients. No significant skeletal or dental differences were found between groups.

Evaluation of condylar cortical bone thickness in patient groups with different vertical facial dimensions using cone-beam computed tomography.

The aim of this study is to evaluate through computed tomography differences in cortical plate thickness of condyle in patients with a different facial vertical skeletal pattern. The final sample of this retrospective study included CBCT exams of 60 adult subjects (mean age 33.2 ± 5.6), selected from the digital archive of a private practice. The subjects were assigned to 3 different groups according to the values of the Frankfurt-mandibular plane angle: hyper-, normo-, and hypodivergent groups. The volume rendering of the mandible was obtained and three condylar points were marked on it: median pole, lateral pole and the most cranial point. For each considered reference point, the minimum distance between external and internal cortical surface was measured, obtaining three different outcomes: condylar cortical bone thickness of median pole (CCBToMP), lateral pole (CCBToLP) and cranial pole (CCBToCP). The measurements were executed by means of Mimics software by the same expert operator in specific scan views. The cortical bone thickness of hyperdivergent patients was found to be statistically thicker than normodivergent patients and hypodivergent patients. Cortical bone thickness of normodivergent patients was found thicker than hypodivergent patients. All the differences were statistically significant (p < 0.05). The Pearson correlation coefficient showed a statistically significant correlation (p < 0.001) between the Frankfurt-mandibular plane angle and the evaluated cortical bone thickness outcomes. Facial biotype characteristics that define vertical facial skeletal pattern affect the cortical bone thickness of mandibular condyle.

Herbst appliance anchored to miniscrews in the upper and lower arches vs standard Herbst: A pilot study.

INTRODUCTION: The aim of this pilot study was to present the preliminary results of Class II malocclusion treatment using a skeletally anchored Herbst appliance with miniscrews inserted in the maxillary and mandibular arches to improve anchorage control and skeletal effects. METHODS: The treatment group (TG) consisted of 13 patients (10 males [M], 3 females [F]; mean age of 12.8 years) with Class II Division 1 malocclusion who were treated with the Herbst appliance and miniscrews inserted in the maxillary and mandibular arches. They were compared with a control group (CG) of 13 patients (10 F, 3 M, mean age of 12.2 years) with Class II Division 1 malocclusion treated with the standard Herbst appliance without miniscrews. Lateral cephalograms were taken before and after Herbst treatment, and cephalometric analysis was performed. RESULTS: In the TG group SNB (°) increased by 2.9°, whereas in CG group SNB (°) increased by 1.1° (P = 0.017). ANB (°) decreased in both groups: -3.3° in the TG group vs -1.3° in the CG group (P = 0.014). Pg-OLp distance increased in both groups: 5.70 mm in the TG group and 0.8 mm in the CG group (P = 0.022). Mandibular incisors proclined 1.6° in the TG group and 3.7° in the CG group. CONCLUSIONS: Herbst treatment reinforced with 4 miniscrews (2 in each arch) increased the orthopedic effect of treatment in growing patients with Class II malocclusion.

The impact of temporomandibular joint arthritis on functional disability and global health in patients with juvenile idiopathic arthritis.

OBJECTIVES: The objective of the study was to evaluate the impact of temporomandibular joint (TMJ) arthritis on the functional disability and quality of life in patients affected by juvenile idiopathic arthritis (JIA). MATERIALS AND METHODS: Sixty-two consecutive patients with JIA with or without TMJ arthritis and 35 healthy control subjects were enrolled in the study. The demographic data, disease activity and clinical characteristics were obtained from all patients. The functional disability was assessed using the Italian version of the Childhood Health Assessment Questionnaire (C-HAQ). The oral health-related quality of life (OHRQoL) was assessed using the Child Perception Questionnaire (CPQ11-14). Possible determining factors of TMJ arthritis comprised demographic, disease characteristics and scores derived from questionnaires that were assessed by a uni and multivariable logistic regression analysis. RESULTS: Compared with patients without TMJs arthritis, JIA patients with TMJ arthritis presented higher functional disability. The multivariable logistic regression analysis performed showed that female subjects (OR = 1.5, P = 0.041), with a JIA duration over 3.9 years (OR = 2.7, P = 0.033) and presenting higher C-HAQ and CPQ11-14 scores (OR = 2.7, P = 0.012 and OR = 2.9, P = 0.015, respectively) were the greatest determining factors for TMJ arthritis. CONCLUSIONS: JIA patients with TMJ arthritis presented higher functional disability and lower OHRQoL scores compared with JIA patients without TMJ arthritis. TMJ arthritis was strongly associated with JIA duration and activity, especially in female patients.

Treatment of recurrent aphthous stomatitis (RAS; aphthae; canker sores) with a barrier forming mouth rinse or topical gel formulation containing hyaluronic acid: a retrospective clinical study.

BACKGROUND: Use of hyaluronic acid-based products has become a valuable alternative to drug-based approaches in the treatment of recurrent aphthous stomatitis (RAS). The presented study aimed to investigate the effect of a barrier forming hyaluronic acid containing mouth wash or a topical gel formulation on the healing of RAS and patient's quality of life. METHODS: For this single-center retrospective study, medical records of the Dental School of the University of Brescia were screened for adult and systemically health patients suffering from minor recurrent aphthous stomatitis (RAS) and treated with either a barrier forming, hyaluronic acid containing mouth wash (GUM® AftaClear® rinse) or a topical gel (GUM® AftaClear® gel) in 2015. All patients fulfilling the in-/exclusion criteria and presenting full data sets on lesion diameter, lesion color, as well as pain perception for baseline (day 0) and 4 and 7 days after treatment were enrolled into the presented study. RESULTS: Out of 60 screened patients, a total of 20 patients treated with the Rinse formulation and 25 treated with the Gel formulation were eligible for the enrollment into this study. Both groups showed equal distribution in patient's age, sex and presented a similar mean lesion size (3.0 ± 1.0 mm), lesion color distribution as well as pain perception at baseline. All patients showed significant normalization of lesion color, reduction of pain, and lesion dimension within the course of their treatment. After 7 days, the mean percentage of lesion reduction was highly significant for both groups attaining 77.4 ± 30.1% in the Rinse group and 81.2 ± 23.1% in the Gel group with a complete lesion closure obtained in 60 and 56% of the cases, respectively. However, a significant (p < 0.05) higher percentage of lesions in the Gel group (72%) compared to the Rinse group (40%) showed an improvement in lesion size already after 3 days. CONCLUSIONS: Within the limitation of retrospective design, it can be concluded that both the barrier forming hyaluronic acid containing mouth rinse as well as the topical gel formulation are effective in the treatment of minor recurrent aphthous stomatitis (RAS), with a trend for an earlier healing onset for the topical Gel formulation.

Impacted and transmigrant mandibular canines incidence, aetiology, and treatment: a systematic review.

Background: The incidence of impacted and transmigrant mandibular canines in the mandible is not as high as that in the maxilla; consequently, it is more difficult to find clinical guidelines derived from sound studies based on large patient samples. Objectives: The aim of this systematic review was to summarize currently available data pertaining to the incidence and aetiology of impacted and transmigrant mandibular canines and the success rates of different treatment strategies. Methods: This review was registered with PROSPERO (CRD42014006175) and was conducted using PRISMA and CRD (Centre for Reviews and Dissemination, University of York) statement. A computerized search of studies published up to February 2016 was conducted using the following databases: PubMed, Cochrane Central Register of Controlled Clinical trials, ISI Web of Knowledge, and Scopus. To identify any relevant publications not included in this list, we manually searched the references lists of the selected articles. The Newcastle-Ottawa Scale quality assessment tool was utilized to classify the included articles. Results: In total, 630 articles were identified after the removal of duplicates. A total of 13 studies published between 2001 and 2015 met all the eligibility criteria and were included for the final analysis. The sample size in these studies ranged from 14 to 112873 teeth, while their methodological quality ranged from low to medium. Conclusions: According to the findings from our review, the incidence of canine impaction in the mandible ranges from 0.92 to 5.1 per cent, while that of canine transmigration ranges from 0.1 to 0.31 per cent. Various etiologies may play a role, including odontomes (up to 20 per cent) and lateral incisor anomalies (16 per cent). Surgical extraction (89 per cent in some studies) and orthodontic traction (20-32 per cent) are the most commonly used treatment strategies, with the latter showing a failure rate of 17 per cent in two studies.

Immediate versus delayed loading: comparison of primary stability loss after miniscrew placement in orthodontic patients-a single-centre blinded randomized clinical trial.

INTRODUCTION: The aim of this randomized clinical trial was to compare torque recordings at insertion time and 1 week post-placement between immediately loaded orthodontic miniscrews and an unloaded control group. TRIAL DESIGN: This RCT was designed as parallel with an allocation ratio of 1:1. METHODS: Eligibility criteria to enroll patients were: needs of fixed orthodontic treatment, no systemic disease, absence of using drugs altering bone metabolism. All patients were consecutively treated in a private practice and the miniscrews were placed by the same author. Patients received ORTHOImplant (3M Unitek) miniscrews and they were blindly divided in two groups: group 1 screws were unloaded between T0 and T1, group 2 received immediately loaded screws with NiTi coil. For each patient, maximum insertion torque (MIT) was evaluated at T0. After 1 week, without loading, the screw torque was measured again (T1) and at the end of the treatment maximal removal torque was evaluated (T2). Torque variation in the first week was considered as the primary outcome. RANDOMIZATION: A randomization list was created for the group assignment, with an allocation ratio of 1:1. BLINDING: The study was single blinded in regard of the statistical analysis. RESULTS: Patients enrolled in the clinical trial were 51 for a total of 81 miniscrews. The recruitment started in November 2012 and the observation period ended in August 2014. Twenty-six and twenty-five patients were analysed in group 1 and 2, respectively. The MIT mean in each placement time was 18.25 Ncm (SD = 3.00), 11.41 Ncm (SD = 3.51) and 10.52 Ncm (SD = 5.14) at T0, T1, and T2 time, respectively. In group 1, the torque decrease between T1 and T0 was statistically higher compared to group 2 (P value = 0.003). Statistically significant effects of the placement times on MIT were found (P value <0.0001). No serious harm was observed. LIMITATIONS: This study was performed using only direct force on the miniscrew and not using the miniscrew as an indirect anchorage. It was not possible to obtain quantitative data on bone quality or root proximity to miniscrews. CONCLUSIONS: A significant stability loss was observed in the first week in both groups; Group 1 showed a statistically higher torque loss in the first week when compared to the immediately loaded group. There were statistically significant effects of the measurement times on MIT and of the miniscrew location on MIT. The overall failure rate was 7.4%. TRIAL REGISTRATION: This trial was not registered. PROTOCOL: The protocol was not published before trial commencement.