Assessing competence in cochlear implant surgery using the newly developed Cochlear Implant Surgery Assessment Tool.

PURPOSE: To develop and gather validity evidence for a novel tool for assessment of cochlear implant (CI) surgery, including virtual reality CI surgery training. METHODS: Prospective study gathering validity evidence according to Messick's framework. Four experts developed the CI Surgery Assessment Tool (CISAT). A total of 35 true novices (medical students), trained novices (residents) and CI surgeons performed two CI-procedures each in the Visible Ear Simulator, which were rated by three blinded experts. Classical test theory and generalizability theory were used for reliability analysis. RESULTS: The CISAT significantly discriminated between the three groups (p < 0.001). The generalizability coefficient was 0.76 and most of the score variance (53.3%) was attributable to the participant and only 6.8% to the raters. When exploring a standard setting for CI surgery, the contrasting groups method suggested a pass/fail score of 36.0 points (out of 55), but since the trained novices performed above this, we propose using the mean CI surgeon performance score (45.3 points). CONCLUSION: Validity evidence for simulation-based assessment of CI performance supports the CISAT. Together with the standard setting, the CISAT might be used to monitor progress in competency-based training of CI surgery and to determine when the trainee can advance to further training.

Ultra-high-fidelity virtual reality mastoidectomy simulation training: a randomized, controlled trial.

PURPOSE: Ultra-high-fidelity (UHF) graphics in virtual reality (VR) simulation might improve surgical skill acquisition in temporal bone training. This study aims to compare UHF VR simulation training with conventional, screen-based VR simulation training (cVR) with respect to performance and cognitive load (CL). METHODS: In a randomized trial with a cross-over design, 24 students completed a total of four mastoidectomies in a VR temporal bone surgical simulator: two performances under UHF conditions using a digital microscope and two performances under conventional conditions using screen-based VR simulation. Performances were assessed by two blinded raters using an established assessment tool. In addition, CL was estimated as the relative change in secondary-task reaction time during simulation when compared with individual baseline measurements. Data were analyzed using linear mixed model analysis for repeated measurements. RESULTS: The mean final-product performance score was significantly lower in UHF VR simulation compared to cVR simulation [mean difference 1.0 points out of 17 points, 95% CI (0.2-1.7), p = 0.02]. The most important factor for performance during UHF simulation was the ability to achieve stereovision (mean difference = 3.4 points, p < 0.001). Under the UHF VR condition, CL was significantly higher than during cVR (28% vs. 18%, respectively, p < 0.001). CONCLUSION: UHF graphics in VR simulation training reduced performance and induced a higher CL in novices than conventional, screen-based VR simulation training. Consequently, UHF VR simulation training should be preceded by cVR training and might be better suited for the training of intermediates or experienced surgeons.

The effect of structured self-assessment in virtual reality simulation training of mastoidectomy.

PURPOSE: Virtual reality (VR) simulation surgical skills training is well established, but self-directed practice is often associated with a learning curve plateau. In this study, we investigate the effects of structured self-assessment as a means to improve performance in mastoidectomy training. METHODS: The study was a prospective, educational study. Two cohorts of novices (medical students) were recruited for practice of anatomical mastoidectomy in a training program with five distributed training blocks. Fifteen participants performed structured self-assessment after each procedure (intervention cohort). A reference cohort of another 14 participants served as controls. Performances were assessed by two blinded raters using a modified Welling Scale and simulator-recorded metrics. RESULTS: The self-assessment cohort performed superiorly to the reference cohort (mean difference of final product score 0.87 points, p = 0.001) and substantially reduced the number of repetitions needed. The self-assessment cohort also had more passing performances for the combined metrics-based score reflecting increased efficiency. Finally, the self-assessment cohort made fewer collisions compared with the reference cohort especially with the chorda tympani, the facial nerve, the incus, and the malleus. CONCLUSIONS: VR simulation training of surgical skills benefits from having learners perform structured self-assessment following each procedure as this increases performance, accelerates the learning curve thereby reducing time needed for training, and induces a safer performance with fewer collisions with critical structures. Structured self-assessment was in itself not sufficient to counter the learning curve plateau and for continued skills development additional supports for deliberate practice are needed.

3-D-Printed Models for Temporal Bone Training: A Validity Study.

OBJECTIVE: 3-D printing offers convenient and low-cost mastoidectomy training; nonetheless, training benefits using 3-D-printed temporal bones remain largely unexplored. In this study, we have collected validity evidence for a low-cost, 3-D-printed temporal bone for mastoidectomy training and established a credible pass/fail score for performance on the model. STUDY DESIGN: A prospective educational study gathering validity evidence using Messick's validity framework. SETTING: Seven Danish otorhinolaryngology training institutions. PARTICIPANTS: Eighteen otorhinolaryngology residents (novices) and 11 experienced otosurgeons (experts). INTERVENTION: Residents and experienced otosurgeons each performed two to three anatomical mastoidectomies on a low-cost, 3-D-printed temporal bone model produced in-house. After drilling, mastoidectomy performances were rated by three blinded experts using a 25-item modified Welling scale (WS). MAIN OUTCOME MEASURE: Validity evidence using Messick's framework including reliability assessment applying both classical test theory and Generalizability theory. RESULTS: Novices achieved a mean score of 13.9 points; experienced otosurgeons achieved 23.2 points. Using the contrasting groups method, we established a 21/25-point pass/fail level. The Generalizability coefficient was 0.91, and 75% of the score variance was attributable to participant performance, indicating a high level of assessment reliability. Subsequent D studies revealed that two raters rating one performance or one rater rating two performances were sufficiently reliable for high-stakes assessment. CONCLUSION: Validity evidence supports using a low-cost, 3-D-printed model for mastoidectomy training. The model can be printed in-house using consumer-grade 3-D printers and serves as an additional training tool in the temporal bone curriculum. For competency-based training, we established a cut-off score of 21 of 25 WS points using the contrasting groups method.

3D-printing a cost-effective model for mastoidectomy training.

BACKGROUND: 3D-printed temporal bone models can potentially provide a cost-effective alternative to cadaver surgery that can be manufactured locally at the training department. The objective of this study was to create a cost-effective 3D-printed model suitable for mastoidectomy training using entry level and commercially available print technologies, enabling individuals, without prior experience on 3D-printing, to manufacture their own models for basic temporal bone training. METHODS: Expert technical professionals and an experienced otosurgeon identified the best material for replicating the temporal bone and created a cost-effective printing routine for the model using entry-level print technologies. Eleven participants at a temporal bone dissection course evaluated the model using a questionnaire. RESULTS: The 3D-printed temporal bone model was printed using a material extrusion 3D-printer with a heat resistant filament, reducing melting during drilling. After printing, a few simple post-processing steps were designed to replicate the dura, sigmoid sinus and facial nerve. Modifying the 3D-printer by installing a direct-drive and ruby nozzle resulted in more successful prints and less need for maintenance. Upon evaluation by otorhinolaryngology trainees, unanimous feedback was that the model provided a good introduction to the mastoidectomy procedure, and supplementing practice to cadaveric temporal bones. CONCLUSION: In-house production of a cost-effective 3D-printed model for temporal bone training is feasible and enables training institutions to manufacture their own models. Further, this work demonstrates the feasibility of creating new temporal bone models with anatomical variation to provide ample training opportunity.

Cochlear implantation: Exploring the effects of 3D stereovision in a digital microscope for virtual reality simulation training - A randomized controlled trial.

In cochlear implantation (CI), excellent surgical technique is critical for hearing outcomes. Recent advances in temporal bone Virtual Reality (VR) training allow for specific training of CI and through introduction of new digital microscopes with ultra-high-fidelity (UHF) graphics. This study aims to investigate whether UHF increases performance in VR simulation training of CI electrode insertion compared with conventional, screen-based VR (cVR). METHODS: Twenty-four medical students completed a randomized, controlled trial of an educational intervention. They performed a total of eight CI electrode insertions each in blocks of four using either UHF-VR or cVR, in randomized order. CI electrode insertion performances were rated by two blinded expert raters using a structured assessment tool supported by validity evidence. RESULTS: Performance scores in cVR were higher than in the UHF-VR simulation although this was not significant (19.8 points, 95% CI [19.3-20.3] vs. 18.8 points, 95% CI [18.2-19.4]; P = 0.09). The decisive factor for performance was participants' ability to achieve stereovision (mean difference = 1.1 points, 95% CI [0.15-2.08], P = 0.02). DISCUSSION: No additional benefit was found from UHF-VR over cVR training of CI electrode insertion for novices. Consequently, standard cVR simulation should be used for novices' basic skills acquisition in CI surgery. Future studies should instead explore the effects of other improvements in CI surgery training and if the lacking benefit of UHF-VR also applies for more experienced learners. CONCLUSION: The increased graphical perception and the superior lifelikeness of UHF-VR does not improve early skills acquisition of CI insertion for novices.

OpenEar Image Data Enables Case Variation in High Fidelity Virtual Reality Ear Surgery.

BACKGROUND: Virtual reality (VR) simulation is an established option for temporal bone surgical training. Most VR simulators are based on computed tomography imaging, whereas the Visible Ear Simulator (VES) is based on high-fidelity cryosections of a single temporal bone specimen. Recently published OpenEar datasets combine cone-beam computed tomography (CBCT) and micro-slicing to achieve similar model quality. This study explores integration of OpenEar datasets into VES to enable case variation in simulation with implications for patient-specific modeling based on CBCT. METHODS: The OpenEar dataset consists of segmented, coregistered, multimodal imaging sets of human temporal bones. We derived drillable bone segments from the dataset as well as triangulated surface models of critical structures such as facial nerve or dura. Realistic visualization was achieved using coloring from micro-slicing, custom tinting, and texture maps. Resulting models were validated by clinical experts. RESULTS: Six of the eight OpenEar datasets could be integrated in VES complete with instructional guides for various temporal bone surgical procedures. Resulting models were of high quality because of postprocessing steps taken to increase realism including colorization and imaging artifact removal. Bone artifacts were common in CBCT, resulting in dehiscences that most often could not be found in the ground truth micro-slicing data. CONCLUSION: New anatomy models are included in VES version 3.5 freeware and provide case variation for training which could help trainees to learn more quickly and transferably under variable practice conditions. The use of CBCT for VR simulation models without postprocessing results in bone artifacts, which should be considered when using clinical imaging for patient-specific simulation, surgical rehearsal, and planning.

The Effect of Simulator-Integrated Tutoring for Guidance in Virtual Reality Simulation Training.

INTRODUCTION: Simulation-integrated tutoring in virtual reality (VR) simulation training by green lighting is a common learning support in simulation-based temporal bone surgical training. However, tutoring overreliance can negatively affect learning. We therefore wanted to investigate the effects of simulator-integrated tutoring on performance and learning. METHODS: A prospective, educational cohort study of a learning intervention (simulator-integrated tutoring) during repeated and distributed VR simulation training for directed, self-regulated learning of the mastoidectomy procedure. Two cohorts of novices (medical students) were recruited: 16 participants were trained using the intervention program (intermittent simulator-integrated tutoring) and 14 participants constituted a nontutored reference cohort. Outcomes were final-product performance assessed by 2 blinded raters and simulator-recorded metrics. RESULTS: Simulator-integrated tutoring had a large and positive effect on the final-product performance while turned on (mean difference = 3.8 points, P < 0.0001). However, this did not translate to a better final-product performance in subsequent nontutored procedures. The tutored cohort had a better metrics-based score, reflecting higher efficiency of drilling (mean difference = 3.6%, P = 0.001). For the individual metrics, simulator-integrated tutoring had mixed effects both during procedures and on the tutored cohort in general (learning effect). CONCLUSIONS: Simulator-integrated tutoring by green lighting did not induce a better final-product performance but increased efficiency. The mixed effects on learning could be caused by tutoring overreliance, resulting from a lack of cognitive engagement when the tutor function is on. Further learning strategies such as feedback should be explored to support novice learning and cognitive engagement.

Expert sampling of VR simulator metrics for automated assessment of mastoidectomy performance.

OBJECTIVE: Often the assessment of mastoidectomy performance requires time-consuming manual rating. Virtual reality (VR) simulators offer potentially useful automated assessment and feedback but should be supported by validity evidence. We aimed to investigate simulator metrics for automated assessment based on the expert performance approach, comparison with an established assessment tool, and the consequences of standard setting. METHODS: The performances of 11 experienced otosurgeons and 37 otorhinolaryngology residents. Participants performed three mastoidectomies in the Visible Ear Simulator. Nine residents contributed additional data on repeated practice in the simulator. One hundred and twenty-nine different performance metrics were collected by the simulator and final-product files were saved. These final products were analyzed using a modified Welling Scale by two blinded raters. RESULTS: Seventeen metrics could discriminate between resident and experienced surgeons' performances. These metrics mainly expressed various aspects of efficiency: Experts demonstrated more goal-directed behavior and less hesitancy, used less time, and selected large and sharp burrs more often. The combined metrics-based score (MBS) demonstrated significant discriminative ability between experienced surgeons and residents with a mean difference of 16.4% (95% confidence interval [12.6-20.2], P << 0.001). A pass/fail score of 83.6% was established. The MBS correlated poorly with the final-product score but excellently with the final-product score per time. CONCLUSION: The MBS mainly reflected efficiency components of the mastoidectomy procedure, and although it could have some uses in self-directed training, it fails to measure and encourage safe routines. Supplemental approaches and feedback are therefore required in VR simulation training of mastoidectomy. LEVEL OF EVIDENCE: 2b Laryngoscope, 129:2170-2177, 2019.

Mapping the plateau of novices in virtual reality simulation training of mastoidectomy.

OBJECTIVES/HYPOTHESIS: To explore why novices' performance plateau in directed, self-regulated virtual reality (VR) simulation training and how performance can be improved. STUDY DESIGN: Prospective study. METHODS: Data on the performances of 40 novices who had completed repeated, directed, self-regulated VR simulation training of mastoidectomy were included. Data were analyzed to identify key areas of difficulty as well as the procedures terminated without using all the time allowed. RESULTS: Novices had difficulty in avoiding drilling holes in the outer anatomical boundaries of the mastoidectomy and frequently made injuries to vital structures such as the lateral semicircular canal, the ossicles, and the facial nerve. The simulator-integrated tutor function improved performance on many of these items, but overreliance on tutoring was observed. Novices also demonstrated poor self-assessment skills and often did not make use of the allowed time, lacking knowledge on when to stop or how to excel. CONCLUSION: Directed, self-regulated VR simulation training of mastoidectomy needs a strong instructional design with specific process goals to support deliberate practice because cognitive effort is needed for novices to improve beyond an initial plateau. LEVEL OF EVIDENCE: N/A. Laryngoscope, 127:907-914, 2017.

Cognitive Load in Mastoidectomy Skills Training: Virtual Reality Simulation and Traditional Dissection Compared.

OBJECTIVE: The cognitive load (CL) theoretical framework suggests that working memory is limited, which has implications for learning and skills acquisition. Complex learning situations such as surgical skills training can potentially induce a cognitive overload, inhibiting learning. This study aims to compare CL in traditional cadaveric dissection training and virtual reality (VR) simulation training of mastoidectomy. DESIGN: A prospective, crossover study. Participants performed cadaveric dissection before VR simulation of the procedure or vice versa. CL was estimated by secondary-task reaction time testing at baseline and during the procedure in both training modalities. SETTING: The national Danish temporal bone course. PARTICIPANTS: A total of 40 novice otorhinolaryngology residents. RESULTS: Reaction time was increased by 20% in VR simulation training and 55% in cadaveric dissection training of mastoidectomy compared with baseline measurements. Traditional dissection training increased CL significantly more than VR simulation training (p < 0.001). CONCLUSIONS: VR simulation training imposed a lower CL than traditional cadaveric dissection training of mastoidectomy. Learning complex surgical skills can be a challenge for the novice and mastoidectomy skills training could potentially be optimized by employing VR simulation training first because of the lower CL. Traditional dissection training could then be used to supplement skills training after basic competencies have been acquired in the VR simulation.

Cognitive load in distributed and massed practice in virtual reality mastoidectomy simulation.

OBJECTIVES/HYPOTHESIS: Cognitive load theory states that working memory is limited. This has implications for learning and suggests that reducing cognitive load (CL) could promote learning and skills acquisition. This study aims to explore the effect of repeated practice and simulator-integrated tutoring on CL in virtual reality (VR) mastoidectomy simulation. STUDY DESIGN: Prospective trial. METHODS: Forty novice medical students performed 12 repeated virtual mastoidectomy procedures in the Visible Ear Simulator: 21 completed distributed practice with practice blocks spaced in time and 19 participants completed massed practice (all practices performed in 1 day). Participants were randomized for tutoring with the simulator-integrated tutor function. Cognitive load was estimated by measuring reaction time in a secondary task. Data were analyzed using linear mixed models for repeated measurements. RESULTS: The mean reaction time increased by 37% during the procedure compared with baseline, demonstrating that the procedure placed substantial cognitive demands. Repeated practice significantly lowered CL in the distributed practice group but not in massed practice group. In addition, CL was found to be further increased by 10.3% in the later and more complex stages of the procedure. The simulator-integrated tutor function did not have an impact on CL. CONCLUSION: Distributed practice decreased CL in repeated VR mastoidectomy training more consistently than was seen in massed practice. This suggests a possible effect of skills and memory consolidation occurring over time. To optimize technical skills learning, training should be organized as time-distributed practice rather than as a massed block of practice, which is common in skills-training courses. LEVEL OF EVIDENCE: N/A.

The effect of implementing cognitive load theory-based design principles in virtual reality simulation training of surgical skills: a randomized controlled trial.

BACKGROUND: Cognitive overload can inhibit learning, and cognitive load theory-based instructional design principles can be used to optimize learning situations. This study aims to investigate the effect of implementing cognitive load theory-based design principles in virtual reality simulation training of mastoidectomy. METHODS: Eighteen novice medical students received 1 h of self-directed virtual reality simulation training of the mastoidectomy procedure randomized for standard instructions (control) or cognitive load theory-based instructions with a worked example followed by a problem completion exercise (intervention). Participants then completed two post-training virtual procedures for assessment and comparison. Cognitive load during the post-training procedures was estimated by reaction time testing on an integrated secondary task. Final-product analysis by two blinded expert raters was used to assess the virtual mastoidectomy performances. RESULTS: Participants in the intervention group had a significantly increased cognitive load during the post-training procedures compared with the control group (52 vs. 41 %, p = 0.02). This was also reflected in the final-product performance: the intervention group had a significantly lower final-product score than the control group (13.0 vs. 15.4, p < 0.005). CONCLUSIONS: Initial instruction using worked examples followed by a problem completion exercise did not reduce the cognitive load or improve the performance of the following procedures in novices. Increased cognitive load when part tasks needed to be integrated in the post-training procedures could be a possible explanation for this. Other instructional designs and methods are needed to lower the cognitive load and improve the performance in virtual reality surgical simulation training of novices.

[Good experiences with interactive temporal bone surgical simulator].

The Visible Ear Simulator (VES) is a freeware temporal bone surgical simulator utilizing a high-fidelity haptic and graphical voxel model compiled from segmented digital images of fresh frozen sections. A haptic device provides the 3-dimensional handling and drilling with force-feedback in real time. In a multilingual user interface the integrated tutor function provides stepwise instructions during drilling through an intuitive, volumetric approach. A censor function draws on metrics derived from the simulator to provide instant and summary feedback for the user. The VES can be downloaded from http://ves.cg.alexandra.dk.