RESUMO
The palette of mineralized tissues in fish is wide, and this is particularly apparent in fish dentin. While the teeth of all vertebrates except fish contain a single dentinal tissue type, called orthodentin, dentin in the teeth of fish can be one of several different tissue types. The most common dentin type in fish is orthodentin. Orthodentin is characterized by several key structural features that are fundamentally different from those of bone and from those of osteodentin. Osteodentin, the second-most common dentin type in fish (based on the tiny fraction of fish species out of â¼30,000 extant fish species in which tooth structure was so far studied), is found in most Selachians (sharks and rays) as well as in several teleost species, and is structurally different from orthodentin. Here we examine the hypothesis that osteodentin is similar to anosteocytic bone tissue in terms of its micro- and nano-structure. We use Focused Ion Beam-Scanning Electron Microscopy (FIB/SEM), as well as several other high-resolution imaging techniques, to characterize the 3D architecture of the three main components of osteodentin (denteons, inter-denteonal matrix, and the transition zone between them). We show that the matrix of osteodentin, although acellular, is extremely similar to mammalian osteonal bone matrix, both in general morphology and in the three-dimensional nano-arrangement of its mineralized collagen fibrils. We also document the presence of a complex network of nano-channels, similar to such networks recently described in bone. Finally, we document the presence of strings of hyper-mineralized small 'pearls' which surround the denteonal canals, and characterize their structure.
Assuntos
Dente , Lobos , Animais , Osso e Ossos , Peixes , Dentina , Microscopia Eletrônica de VarreduraRESUMO
Understanding how living tissues respond to changes in their mechanical environment is a key question in evolutionary biology. Invasive species provide an ideal model for this as they are often transplanted between environments that differ drastically in their ecological and environmental context. Spatial sorting, the name given to the phenomenon driving differences between individuals at the core and edge of an expanding range, has been demonstrated to impact the morphology and physiology of Xenopus laevis from the invasive French population. Here, we combined a structural analysis using micro-CT scanning and a functional analysis by testing the mechanical properties of the femur to test whether the increased dispersal at the range edge drives differences in bone morphology and function. Our results show significant differences in the inner structure of the femur as well as bone material properties, with frogs from the centre of the range having more robust and resistant bones. This is suggestive of an energy allocation trade-off between locomotion and investment in bone formation, or alternatively, may point to selection for fast locomotion at the range edge. Overall, our results provide insights on the growth of the long bones and the formation of trabecular bone in frogs.
Assuntos
Fêmur , Espécies Introduzidas , Microtomografia por Raio-X , Xenopus laevis , Animais , Xenopus laevis/fisiologia , Xenopus laevis/anatomia & histologia , Xenopus laevis/crescimento & desenvolvimento , Fêmur/fisiologia , Fêmur/anatomia & histologia , Fenômenos Biomecânicos , Locomoção/fisiologia , França , FemininoRESUMO
Scales are structures composed of mineralized collagen fibrils embedded in the skin of fish. Here we investigate structures contributing to the bulk of the scale material of the sturgeon (Acipencer guldenstatii) at the millimeter, micrometer and nanometer length scales. Polished and fracture surfaces were prepared in each of the three anatomic planes for imaging with light and electron microscopy, as well as focused ion beam - scanning electron microscopy (FIB-SEM). The scale is composed of three layers, upper and lower layers forming the bulk of the scale, as well as a thin surface layer. FTIR shows that the scale is composed mainly of collagen and carbonated hydroxyapatite. Lacunae are present throughout the structure. Fracture surfaces of all three layers are characterized by large diameter collagen fibril bundles (CFBs) emanating from a plane comprising smaller diameter CFBs orientated in different directions. Fine lineations seen in polished surfaces of both major layers are used to define planes called here the striation planes. FIB-SEM image stacks of the upper and lower layers acquired in planes aligned with the striation planes, show that CFBs are oriented in various directions within the striation plane, with larger CFBs emanating from the striation plane. Fibril bundles oriented in different directions in the same plane is reminiscent of a similar organization in orthodentin. The large collagen fibril bundles emanating out of this plane are analogous to von Korff fibrils found in developing dentin with respect to size and orientation. Scales of the sturgeon are unusual in that their mineralized collagen fibril organization contains structural elements of both dentin and bone. The sturgeon scale may be an example of an early evolved mineralized material which is neither bone nor dentin but contains characteristics of both materials, however, the fossil data required to confirm this is missing.
Assuntos
Colágeno , Microscopia Eletrônica de Volume , Animais , Microscopia Eletrônica , Osso e Ossos , Dentina , Microscopia Eletrônica de VarreduraRESUMO
OBJECTIVES: The aim of this study was to compare the approximate center of rotation in normal and diseased elbows in dogs. STUDY DESIGN: Cross-sectional study SAMPLE POPULATION: Computer tomography scans of nine dogs with unilateral fragmented medial coronoid process (FMCP). METHODS: A board certified radiologist confirmed that each dog had unilateral FMCP, and a normal contralateral elbow. Digital 3D models of all elbow joints were uploaded into a surgical planning software package. Four axes approximating the center of rotation (COR) of elbow joints were generated using five geometric shapes based on subchondral topography of the humeral condyle radius and ulna. Images showing the locations where axes exited the medial and lateral cortex of the humeral condyle were captured and imported into a second software package, for measurement of distances between exit points and the origin of a system of axes. RESULTS: In normal joints 20/27 (74%) axes exited the medial cortex, and 25/27 (93%) axes exited the lateral cortex cranial and distal to the medial and lateral epicondyles, respectively. In diseased joints 22/27 (81%) axes exited medial cortex and 19/27 (70%) axes exited the lateral cortex, caudal and distal to the medial and lateral epicondyles, respectively. CONCLUSION: Based on CT- derived geometry, the COR of elbow affected with FMCP was generally more caudal than normal. CLINICAL SIGNIFICANCE: External landmarks approximating the location of the elbow COR are provided, and while not validated, may assist in planning, creation, and assessment of procedures for FMCP.
Assuntos
Doenças Ósseas , Doenças do Cão , Articulação do Cotovelo , Artropatias , Cães , Animais , Articulação do Cotovelo/diagnóstico por imagem , Articulações/cirurgia , Estudos Transversais , Rotação , Artropatias/diagnóstico por imagem , Artropatias/veterinária , Ulna/diagnóstico por imagem , Doenças Ósseas/veterinária , Membro Anterior/diagnóstico por imagem , Membro Anterior/cirurgia , Doenças do Cão/diagnóstico por imagem , Doenças do Cão/cirurgiaRESUMO
OBJECTIVE: To evaluate the effect of the interosseous ligament and selected antebrachiocarpal ligaments on the internal rotation of the radius relative to the ulna, during carpal extension. STUDY DESIGN: Cadaveric study. SAMPLE POPULATION: Twenty-four cadaveric canine forelimbs. METHODS: Twenty-four forelimbs were disarticulated at the elbow joint and the antebrachia were prepared for testing. The forelimbs were divided to 6 groups, defined by the order in which ligaments were transected. All specimens were tested intact and after transecting each of the ligaments with the order defined by the group. Rotation of the radius relative to the ulna, caused by extension of the carpus, was measured using a sensor connected to the radius. RESULTS: The mean(±sd) maximum internal rotation of the radius (5.94° ± (1.23°)) with all the ligaments intact was significantly greater (p < 0.012) than the mean(±sd) maximum internal rotation of the radius (3.13° (± 1.13°)) after transecting the interosseus ligament. Transecting the interosseous ligament subsequent to one of the other ligaments caused a decrease in internal radial rotation (p = 0.629), while, transecting the short radial collateral ligament caused an increase in radial rotation (p = 0.629). Transecting the palmar radiocarpal and ulnocarpal ligaments had no effect on radial rotation. CONCLUSION: The interosseous ligament was stretched with internal rotation of the radius due to carpal extension. Carpal flexion resulted in external rotation of the radius. This effect was lost when the interosseus ligament was transected. CLINICAL SIGNIFICANCE: Rotation of the radius is associated with carpal extension, and is likely an intrinsic part of forelimb biomechanics.
Assuntos
Cães/fisiologia , Membro Anterior/fisiologia , Ligamentos Articulares/fisiologia , Rádio (Anatomia)/fisiologia , Animais , Fenômenos Biomecânicos , Cadáver , Carpo Animal/fisiologia , Articulações/fisiologia , Amplitude de Movimento Articular , Rotação , Ulna/fisiologiaRESUMO
OBJECTIVE: To describe bilateral mobilization of the superficial gluteal muscle (SGM) to treat ventral perineal hernias in dogs. STUDY DESIGN: Cadaveric study and short case series. SAMPLE POPULATION: Male dog cadavers (n = 10) weighing between 5 and 42 kg and three dogs treated for ventral perineal hernia. METHODS: Cadavers were positioned in right and left lateral recumbency to free the origin and insertion of the ipsilateral SGM except for muscle fibers originating on the first tail vertebra and sacrotuberous ligament. The dogs were placed in ventral recumbency to approach the perineum and rotate the muscle flaps. The insertions of the SGM were sutured together ventral to the anal sphincter muscle. The dorsal border of the overlapping tendons was sutured to the anal sphincter muscle, and the ventral border was sutured to the ischiourethralis muscle. The amount of overlap between bilateral flaps was measured. The SGM flaps were used to revise recurrent perineal hernias in three dogs. RESULTS: Superficial gluteal muscle flaps were created without damage to the blood supply in all dogs. The overlap between the bilateral flaps ventral to the anal sphincter measured 0 to 2.4 cm. No recurrence was detected at follow-up (6-12 months) in the three dogs treated with these flaps. CONCLUSION: Superficial gluteal muscle flaps were mobilized without damage to the blood supply and crossed the midline ventral to the anal sphincter. Flaps were used successfully to repair ventral perineal hernias in three dogs. CLINICAL SIGNIFICANCE: Bilateral SGM flaps can be considered to repair ventral perineal hernias.
Assuntos
Hérnia Ventral/veterinária , Herniorrafia/veterinária , Períneo/cirurgia , Retalhos Cirúrgicos/veterinária , Animais , Nádegas/cirurgia , Cadáver , Cães , Hérnia Ventral/cirurgia , Masculino , Músculo Esquelético/cirurgiaRESUMO
BACKGROUND: Clinical outcome after cutaneous reconstruction using genicular artery flaps has not been reported. Major cutaneous defects of the pelvic limb between the stifle and hock are frequent in dogs and closure is difficult due to lack of available skin from immediately adjacent areas. CASE PRESENTATION: Here we report the first two clinical cases successfully managed by genicular axial pattern flap closure. A 2-year-old 38 kg (83.77-lb) intact male Labrador Retriever and a 14-year-old 42 kg (92.59-lb) spayed mixed breed female dog were admitted for the management of large skin defects in the lateral tibiotarsal joint. One defect was the result of a fibrosarcoma removal in the Labrador dog and the other defect was a chronic large wound caused by a car accident in the mixed breed female dog. Both defects were reconstructed by using genicular flaps. The bed of the wound in mixed breed dog was surgically debrided and underwent open wound management until a proper granulation tissue bed was formed before reconstruction. The skin defect in the Labrador dog was covered immediately after tumor removal. After surgery both dogs were bearing weight on the limbs normally. Small area of dehiscence occurred in both dogs 2 weeks after surgery. At follow-up examination one month after surgery, the surgical wound of the Labrador retriever still had a small area of dehiscence. Two months after surgery, the wound of the mixed breed dog was completely healed, covered with hair and no lameness was observed. CONCLUSION: Findings suggested that genicular axial pattern flap is a good option for reconstruction of large cutaneous defects of the lateral aspects of the tibia in dogs.
Assuntos
Procedimentos Cirúrgicos Dermatológicos/veterinária , Retalhos Cirúrgicos/veterinária , Tíbia/cirurgia , Animais , Procedimentos Cirúrgicos Dermatológicos/normas , Cães , Feminino , Masculino , Pele/lesões , Tíbia/lesões , Resultado do Tratamento , CicatrizaçãoRESUMO
OBJECTIVE: To evaluate the effect of tibial plateau leveling osteotomy (TPLO) and tibial tuberosity transposition (TTA) on craniocaudal stability of the cranial cruciate ligament (CCL) deficient stifle at 3 joint angles. STUDY DESIGN: Ex vivo biomechanical study. SAMPLE POPULATION: Eight stifles from 4 dogs. METHODS: One of the hind limbs was randomly assigned to undergo TPLO or TTA, with the contralateral limb assigned to the alternate procedure. Each specimen was tested with the stifle at 150°, 135°, and 120° of flexion. Cranial translation of the tibia relative to the femur was measured under cranial loads ranging from 0.2 to 2.0 kg with a single motion tracking sensor (Nest of Birds) fixed to the tibia. Each stifle was tested before and after transection of the CCL and after performing the assigned procedure. RESULTS: Tibial plateau leveling osteotomy and TTA caused a decrease in the cranial translation of the tibia relative to the femur, especially at greater angles of flexion. Tibial plateau leveling osteotomy caused a greater decrease in tibial cranial translation and was associated with a degree of translation that did not differ from joints with intact CCL, regardless of the degree of stifle flexion. CONCLUSION: Tibial plateau leveling osteotomy and TTA caused an angle dependent decrease in craniocaudal translation of the tibia in the CCL deficient stifle. Only TPLO restored translations similar to those of the intact joint at all angles tested. CLINICAL IMPACT: Tibial plateau leveling osteotomy and TTA provide passive stability to the stifle. Tibial plateau leveling osteotomy seems more effective than TTA at restoring craniocaudal stability of the stifle.
Assuntos
Lesões do Ligamento Cruzado Anterior/veterinária , Cães/cirurgia , Osteotomia/veterinária , Joelho de Quadrúpedes/cirurgia , Animais , Ligamento Cruzado Anterior/cirurgia , Lesões do Ligamento Cruzado Anterior/cirurgia , Fenômenos Biomecânicos , Cadáver , Fêmur , Osteotomia/métodos , Amplitude de Movimento ArticularRESUMO
OBJECTIVE: To compare biomechanical properties and mechanism of failure of 3 regions of ventral abdominal wall in cats by using 2 suture materials, 2 suture bite-to-stitch intervals (SBSI), and full-thickness versus fascia-only closure. STUDY DESIGN: Randomized, cadaveric, ex vivo mechanical testing. SAMPLE POPULATION: 16 adult cat cadavers, 3 samples per cat. METHODS: Three regions of ventral abdominal wall were mechanically tested (N = 48 samples). Preumbilical, umbilical (U), and postumbilical (POU) regions were harvested by using a template. The thickness of the linea alba was recorded. Six samples without celiotomy served as controls. Twenty-eight samples were randomized to SBSI (2 × 2 or 5 × 5 mm) and suture material (3-0 polyglactin 910 or 3-0 polydioxanone) for simple continuous celiotomy closure. Fourteen samples were randomized to full-thickness or fascia-only closure. Samples were tested by linear distraction; tensile strength and mechanism of failure were recorded. Effects of body weight, thickness of linea alba, anatomic region, SBSI, type of closure, and suture material were evaluated by mixed model linear analysis. Load to failure was compared between males and females, full-thickness and fascia-only closure by independent t test, with P < .05 considered statistically significant. RESULTS: The POU region achieved lower loads to failure. Load to failure was greater in males compared with females. No difference was detected between full-thickness and fascia-only closure. Failure most commonly occurred by tearing of suture through tissues. Tissue failure with suture line loosening occurred mainly in the 5 × 5-mm SBSI group. CONCLUSION: The POU region is biomechanically weak and may therefore be predisposed to incisional herniation.
Assuntos
Parede Abdominal/cirurgia , Gatos/cirurgia , Suturas/veterinária , Técnicas de Fechamento de Ferimentos/veterinária , Animais , Fenômenos Biomecânicos , Cadáver , Feminino , Laparotomia/veterinária , Masculino , Polidioxanona , Poliglactina 910 , Resistência à Tração , Técnicas de Fechamento de Ferimentos/instrumentaçãoRESUMO
OBJECTIVE: To identify landmarks and to describe a technique for nerve blockade of the dorsal cranium in dogs. STUDY DESIGN: Anatomic cadaveric study. ANIMALS: A total of 39 dog cadavers, weighing 18.0 ± 9.7 kg (mean ± standard deviation). METHODS: The study was performed in three parts. In the initial part, cadavers were dissected to determine the location of the frontal, zygomaticotemporal, and major occipital nerves, and to identify prominent landmarks for their blockade. In the second part, one technique was developed to block each of the frontal and zygomaticotemporal nerves, and two techniques, rostral and caudal, were developed to block the major occipital nerve. Injection solution was 0.05% methylene blue in 0.5% bupivacaine. In the third part, cadavers were used to test the techniques developed in the second part with 0.04 mL kg-1 of the same injectate administered at each site (maximal volume 0.5 mL per site). The length of nerve stained was measured, with a length ≥6 mm considered successful. Confidence intervals were calculated using Fisher's exact test. RESULTS: Success rates (95% confidence interval) for the frontal, zygomaticotemporal, and rostral and caudal locations for the major occipital nerve were 94% (80-99%), 91% (76-98%), 74% (58-86%) and 77% (59-89%), respectively. With a combination of both locations, the success rate for the major occipital nerve was 100% (90-100%). CONCLUSION AND CLINICAL RELEVANCE: This study describes a simple regional anaesthesia technique using palpable anatomical landmarks that may provide analgesia for dogs undergoing craniotomy.
Assuntos
Anestesia por Condução/veterinária , Cães/anatomia & histologia , Bloqueio Nervoso/veterinária , Crânio , Pontos de Referência Anatômicos/anatomia & histologia , Anestesia por Condução/métodos , Animais , Nervos Cranianos/anatomia & histologia , Bloqueio Nervoso/métodos , Crânio/anatomia & histologia , Crânio/inervaçãoRESUMO
The bones of the skeleton of most advanced teleost fish do not contain osteocytes. Considering the pivotal role assigned to osteocytes in the process of modeling and remodeling (the adaptation of external and internal bone structure and morphology to external loads and the repair of areas with micro-damage accumulation, respectively) it is unclear how, and even whether, their skeleton can undergo modeling and remodeling. Here, we report on the results of a study of controlled loading of the anosteocytic opercula of tilapia (Oreochromis aureus). Using a variety of microscopy techniques we show that the bone of the anosteocytic tilapia actively adapts to applied loads, despite the complete absence of osteocytes. We show that in the directly loaded area, the response involves a combination of bone resorption and bone deposition; we interpret these results and the structure of the resultant bone tissue to mean that both modeling and remodeling are taking place in response to load. We further show that adjacent to the loaded area, new bone is deposited in an organized, layered manner, typical of a modeling process. The material stiffness of the newly deposited bone is higher than that of the bone which was present prior to loading. The absence of osteocytes requires another candidate cell for mechanosensing and coordinating the modeling process, with osteoblasts seeming the most likely candidates.
Assuntos
Remodelação Óssea/fisiologia , Osso e Ossos/fisiologia , Tilápia/fisiologia , Animais , Fenômenos Biomecânicos , Osso e Ossos/ultraestrutura , Osteogênese , Tilápia/anatomia & histologiaRESUMO
OBJECTIVE: To determine the optimal intramedullary (IM) pin size for open and percutaneous normograde pinning of the distal humerus. STUDY DESIGN: Ex vivo anatomic study. SAMPLE POPULATION: Sixteen canine cadavers. METHODS: Sixteen pairs of forelimbs were harvested from canine cadavers weighing 25-35 kg. The craniocaudal diameter of the humeral medullary canal, at the distal 80th percentile of its length, was measured on a lateral radiograph. Forelimbs within each pair were allocated to percutaneous or open pinning techniques. Cadavers were divided into three groups based on IM pin diameter relative to the medullary canal diameter: Group 25-35%, Group 36-45%, and Group 46-55%. Pins were inserted normograde into the medial epicondyle and advanced until they exited the proximal humerus. Pin tracts were dissected and damage to soft tissue, bony structures, and location of entry and exit points were documented. The humeri were also cut at the thinnest point of the medial epicondyle and damage to the bone was evaluated. RESULTS: There was no difference in any of the outcomes between the open and percutaneous techniques. Cortical damage was more frequent in Group 46-55% and included blanching and or fracture of the cortex of the medial epicondyle, with fracture occurring in 6/10 limbs in this group. Pins in Group 46-55% exited the farthest and most distal from the optimal exit point and were difficult to place in all limbs. CONCLUSION: This study supports a recommendation for open and percutaneous pinning of the humerus with IM pins 36-45% of the medullary canal diameter measured at the distal 80th percentile of humeral length.
Assuntos
Pinos Ortopédicos/veterinária , Cães/lesões , Fixação Intramedular de Fraturas/veterinária , Fraturas do Úmero/veterinária , Animais , Cadáver , Fraturas do Úmero/cirurgiaRESUMO
A 14-month-old mixed-breed dog was presented with acute onset of exercise intolerance that quickly progressed to quadriparesis. Gross and microscopic autopsy findings indicated a type of degenerative polioencephalomyelopathy resembling subacute necrotizing encephalomyelopathy in dogs or Leigh's disease in humans. This syndrome has previously been reported only in purebred dogs.
Polioencéphalomyélopathie chez un chien de race croisée ressemblant au syndrome de Leigh. Un chien de race croisée âgé de 14 mois a été présenté avec l'apparition aiguë d'intolérance à l'exercice qui a rapidement progressé à la quadriparésie. Suite à la nécropsie, les constatations macroscopiques et microscopique ont indiqué un type de polioencéphalomyélopathie dégénérative ressemblant à l'encéphalomyélopathie nécrosante subaiguë chez les chiens ou au syndrome de Leigh chez les humains. Ce syndrome avait été signalé précédemment seulement chez les chiens de race pure.(Traduit par Isabelle Vallières).
Assuntos
Encefalopatias Metabólicas Congênitas/veterinária , Doenças do Cão/patologia , Animais , Encefalopatias Metabólicas Congênitas/diagnóstico , Encefalopatias Metabólicas Congênitas/patologia , Doenças do Cão/diagnóstico , Cães , FemininoRESUMO
OBJECTIVE: To examine if the tension at the site of a urethral anastomosis can be relieved by performing either a crural release technique or an ischial osteotomy technique. STUDY DESIGN: Cadaveric study and 2 case reports. ANIMALS: Adult male cat cadavers (n = 18). METHODS: Cats were divided into 2 groups; crural release (n = 9) and ischial osteotomy (n = 9). In each group, 20%, 25%, and 30% of the pelvic urethra was excised in 3 cats. The length of the urethral defect was measured after excision of the urethral segment, and after approximation, before and subsequent to the tension relieving technique performed. Two clinical cases are described. RESULTS: Both crural release and ischial osteotomy were effective in relieving the tension encountered at the urethral anastomosis after removal of 20% of the urethral length. In the ischial osteotomy group, apposition without tension after removing up to 30% of the intrapelvic urethral length was easily achieved. A similar technique was successfully used in 2 clinical cases. CONCLUSION: Crural release and ischial osteotomy techniques allow approximation and tension free anastomosis of large segmental defects of the pelvic urethra in cats.
Assuntos
Gatos/cirurgia , Ísquio/cirurgia , Uretra/lesões , Uretra/cirurgia , Procedimentos Cirúrgicos Urológicos Masculinos/veterinária , Anastomose Cirúrgica/métodos , Anastomose Cirúrgica/veterinária , Animais , Fenômenos Biomecânicos , Cadáver , Masculino , Osteotomia/veterinária , Ruptura/cirurgia , Ruptura/veterinária , Procedimentos Cirúrgicos Urológicos Masculinos/métodosRESUMO
OBJECTIVE: To describe the direction and magnitude of the rotation of the radius relative to the ulna during extension of the carpus and to describe the effect of carpal extension on internal and external rotation of the radius relative to the ulna. STUDY DESIGN: In vitro experiment. ANIMALS: Cadaveric canine thoracic limbs (n = 11). METHODS: Eleven thoracic limbs were collected from 6 healthy mixed breed dogs of medium build. Each specimen was radiographed to ensure that the carpal and elbow joints were free of pathology. The elbow joint was disarticulated and the distal thoracic limb was prepared for biomechanical testing. Each specimen was stripped of soft tissue, leaving the soft tissues around the proximal aspect of the radius and ulna intact. The interosseous ligament, pronator teres muscle, and all the soft tissues distal to the distal metaphysis of the radius were also left intact. In the 1st part of the study, the rotation of the radius relative to the ulna was measured while extending the carpal joint using a system of weights and pulleys attached to the manus. In the 2nd part of the study, the internal and external rotation of the radius relative to the ulna was performed by applying an internal and external rotational load to the radius using a system of weights and pulleys attached to the radius. The internal and external rotation of the radius was measured with the carpus unloaded and with the carpus extended by applying a load of 5 kg to the manus. RESULTS: Extension of the carpus resulted in internal rotation of the radius relative to the ulna. With the carpus extended under a maximum load of 2 kg, the mean (± SD) internal rotation of the radius was 4.3 ± 2.1° for all specimens. With the carpus unloaded, the mean internal and external rotation of the radius was 11.5 ± 2.9° and 22.5 ± 7.7° for all specimens, respectively. With the carpus loaded (extended under 5 kg load), the mean internal and external rotation of the radius was 3.3 ± 1.2° and 7.3 ± 2.0° for all specimens, respectively. The difference between internal and external rotation with the carpus loaded and unloaded was significant. CONCLUSION: Extending the carpus results in internal rotation, and proximal translation of the radius relative to the ulna. Loading the carpus in extension decreases the internal and external rotation of the radius relative to the ulna. A better understanding of the interaction between the carpus and the elbow may improve our understanding of the pathogenesis of elbow dysplasia.
Assuntos
Carpo Animal/fisiologia , Cães/fisiologia , Rádio (Anatomia)/fisiologia , Animais , Fenômenos Biomecânicos , Cadáver , Carpo Animal/anatomia & histologia , Cães/anatomia & histologia , Rádio (Anatomia)/anatomia & histologia , Rotação , Ulna/anatomia & histologia , Ulna/fisiologiaRESUMO
Introduction: The cranial cruciate ligament (CCL) is one of numerous structures which determine the path of the tibia relative to the femur when passively flexing/extending the stifle of the dog. The effect of cutting the CCL on passive motion with the hind limb in different orientations, is unknown. The aim of this study was to describe passive movement of the tibia relative to the femur in dogs, with the hind limb in three different orientations, and with CCL intact and cut. Methods: Ten cadaveric hind limbs were obtained from dogs weighing between 20 kg and 25 kg and prepared for testing in a custom-built joint testing machine. Each hind limb was tested in three different orientations with data collected, using an electromagnetic tracking system, during 2 cycles of flexion/extension with the CCL intact and cut. Each cycle was initiated with the stifle in full extension (0°) and data was collected at 0°, 20°, 30°, 40°, 45°, and 55° of stifle flexion/extension. Results: Flexion of the stifle resulted in caudal translation and internal rotation of the tibia relative to the femur, with cranial translation and external rotation occurring during extension along the identical path. Cutting the cranial cruciate ligament did not result in significant differences in translation or rotation when the stifle was orientated to approximated the standing position of a dog. Discussion: Isometric points at the origin and insertion of the CCL can potentially be identified in CCL deficient stifles using a technique based on passive motion of an intact stifle.
RESUMO
Perineal urethrostomy in cats is indicated for urethral pathologies located distal to the bulbourethral glands. The description of the bulbourethral glands as the cranial landmark when performing a PU is based on the increased urethral diameter at this location, rather than on an anatomical limitation. This suggests that urethral pathologies cranial to the bulbourethral glands could potentially be treated with PU. At present, the extent to which the pelvic urethra can be mobilized is unknown. Characterization and quantification of the effect of PU on the pelvic urethra is required prior to attempting to define the location of the pelvic urethra, cranial to the bulbourethral glands, which can be exteriorized when performing a PU. Our aim was to characterize and quantify the effect of performing a PU on the location and length of the pelvic urethra. METHODS: Ten male feline cadavers were used, and four markers were placed on the pelvic urethra via a ventral approach to the peritoneal and pelvic cavities. Two orthogonal radiographic views were acquired prior and subsequent to performing a PU. The distance of each marker to a predefined landmark/origin and the distances of the markers relative to each other were measured on all radiographs. RESULTS: PU resulted in significant caudal translation of the markers relative to the predefined landmark on all radiographic views; however, PU did not result in a significant change in the distances between the markers. CONCLUSIONS: Performing a PU results in caudal translation and minimal stretching of the mobilized pelvic urethra.
RESUMO
The structure, composition, and shape of teeth have been related to dietary specialization in many vertebrate species, but comparative studies on snakes' teeth are lacking. Yet, snakes have diverse dietary habits that may impact the shape of their teeth. We hypothesize that prey properties, such as hardness and shape, as well as feeding behavior, such as aquatic or arboreal predation, or holding vigorous prey, impose constraints on the evolution of tooth shape in snakes. We compared the morphology of the dentary teeth of 63 species that cover the phylogenetic and dietary diversity of snakes, using 3D geometric morphometrics and linear measurements. Our results show that prey hardness, foraging substrate, and the main feeding mechanical challenge are important drivers of tooth shape, size, and curvature. Overall, long, slender, curved teeth with a thin layer of hard tissue are observed in species that need to maintain a grip on their prey. Short, stout, less curved teeth are associated with species that undergo high or repeated loads. Our study demonstrates the diversity of tooth morphology in snakes and the need to investigate its underlying functional implications to better understand the evolution of teeth in vertebrates.
RESUMO
OBJECTIVE: The aim of this study was to develop a three-dimensional (3D) model to identify the isometric component of the cranial cruciate ligament (CCL) in dogs. METHODS: A static 3D model of the specimen was generated from a computed tomography scan of the stifle of a dog and a kinematic model was generated from data collected, every 5 degrees from full extension (131 degrees) through 80 degrees of stifle flexion, from four sensors attached to the tibia. Kinematic data were superimposed on the static model by aligning the points of interest, which were defined for both models. This allowed the tibia to rotate and translate relative to the femur based on the kinematic data. The contours of the distal femur and proximal tibia were converted into point clouds and the distance between each point in the femoral point cloud and all the points in the tibial point cloud were measured at each of the 15 positions. The difference between the maximum and minimum distances for each pair of points was calculated, and when it was less than 0.2 mm, points were illustrated as two red dots connected by a line at their locations on the femur and tibia. RESULTS: A total of 3,681 pairs of isometric points were identified and were located at the origin and insertion of the CCL and on the lateral aspect of the stifle. CONCLUSION: Isometric areas are present at the origin and insertion of the CCL and lateral aspect of the stifle. Better understanding of these locations may lead to refinements in techniques to replace the ruptured CCL.
Assuntos
Lesões do Ligamento Cruzado Anterior , Doenças do Cão , Cães , Animais , Joelho de Quadrúpedes , Cadáver , Ligamento Cruzado Anterior , Tíbia , Fêmur , Fenômenos Biomecânicos , Lesões do Ligamento Cruzado Anterior/veterináriaRESUMO
Introduction: Osteoarthritis is a common disease in dogs resulting in chronic pain and decreased wellbeing. Common analgesics such as non-steroidal anti-inflammatories may fail to control pain and can produce major adverse effects. Study objectives were to evaluate pharmacokinetics, therapeutic efficacy, and safety of subcutaneous liposomal-cannabidiol (CBD) as an additional analgesic therapy in dogs suffering from naturally-occurring osteoarthritis. Methods: Six such dogs were recruited following ethics approval and owner consent. Dogs were administered a single subcutaneous injection of 5 mg/kg liposomal-CBD. Plasma concentrations of CBD, blood work, activity monitoring collar data, wellbeing questionnaire (owners) and pain scoring (veterinarian) were performed at baseline and monitored up to six weeks following intervention. Data overtime were compared with baseline using linear-regression mixed-effects. P-value was set at 0.05. Results: CBD plasma concentrations were observed for 6 weeks; median (range) peak plasma concentration (Cmax) was 45.2 (17.8-72.5) ng/mL, time to Cmax was 4 (2-14) days and half-life was 12.4 (7.7-42.6) days. Median (range) collar activity score was significantly increased on weeks 5-6; from 29 (17-34) to 34 (21-38). Scores of wellbeing and pain evaluations were significantly improved at 2-3 weeks; from 69 (52-78) to 53.5 (41-68), and from 7.5 (6-8) to 5.5 (5-7), respectively. The main adverse effect was minor local swelling for several days in 5/6 dogs. Conclusion: Liposomal-CBD administered subcutaneously produced detectable CBD plasma concentrations for 6 weeks with minimal side effects and demonstrated reduced pain and increased wellbeing as part of multimodal pain management in dogs suffering from osteoarthritis. Further placebo-controlled studies are of interest.