Midpalatal Suture Density Evaluation after Rapid and Slow Maxillary Expansion with a Low-Dose CT Protocol: A Retrospective Study.

Background and objectives: The aim of the present paper is to use low-dose computed tomography (CT) to evaluate the changes in the midpalatal suture density in patients treated with rapid maxillary expansion (RME) and slow maxillary expansion (SME). Materials and Methods: Thirty patients (mean age 10.2 ± 1.2 years) were retrospectively selected from the existing sample of a previous study. For each patient, a low-dose computed tomography examination was performed before appliance placement (T0) and at the end of retention (T1), seven months later. Using the collected images, the midpalatal suture density was evaluated in six regions of interest. Results: No significant differences were found between the timepoints in the rapid maxillary expansion group. Three out of six regions of interest showed significant decreases between the timepoints in the slow maxillary expansion group. No significant differences were found in comparisons between the two groups. Conclusions: The midpalatal suture density showed no significant differences when rapid maxillary expansion groups were compared to slow maxillary expansion groups, suggesting that a similar rate of suture reorganization occurs despite different expansion protocols.

Can muscle vibration be the future in the treatment of cerebral palsy-related drooling? A feasibility study.

Background: Drooling is an involuntary loss of saliva from the mouth, and it is a common problem for children with cerebral palsy (CP). The treatment may be pharmacological, surgical, or speech-related. Repeated Muscle Vibration (rMV) is a proprioceptive impulse that activates fibers Ia reaching the somatosensory and motor cortex. Aim: The aim of the study is to evaluate the effectiveness of rMV in the treatment of drooling in CP. Design, setting and population: This was a rater blinded prospective feasibility study, performed at the "Gli Angeli di Padre Pio" Foundation, Rehabilitation Centers (Foggia, Italy), involving twenty-two CP patients affected by drooling (aged 5-15, mean 9,28 ± 3,62). Children were evaluated at baseline (T0), 10 days (T1), 1 month (T2) and 3 months (T3) after the treatment. Methods: The degree and impact of drooling was assessed by using the Drooling Impact Scale (DIS), the Drooling Frequency and Severity Scale (DFSS), Visual Analogue Scale (VAS) and Drooling Quotient (DQ). An rMV stimulus under the chin symphysis was applied with a 30 min protocol for 3 consecutive days. Results: The statistical analysis shows that DIS, DFSS, VAS, DQ improved with significant differences in the multiple comparisons between T1 vs T2, T1 vs T3 and T1 vs T4 (p≤0.001). Conclusion This study demonstrates that rMV might be a safe and effective tool in reducing drooling in patients with CP. The vibrations can improve the swallowing mechanisms and favor the acquisition of the maturity of the oral motor control in children with CP.

Anti-inflammatory effect of ATB-352, a H2S -releasing ketoprofen derivative, on lipopolysaccharide-induced periodontitis in rats.

Periodontal disease is the most common cause of tooth loss in humans, is an inflammatory disease initiated by oral microbial biofilm. Given the involvement of the inflammatory pathway in this type of pathology, the main pharmacological strategy for the treatment of periodontitis, is the inhibition of the inflammatory process in order to prevent tissue destruction and bone resorption, a condition associated with a painful state. To do this, the best class of drugs are Non-steroidal anti-inflammatory drugs (NSAIDs), however, the presence of side effects, especially at the gastrointestinal tract, limits their use for long-term therapy. Recently, some evidence shows that derivatives of NSAIDs capable of releasing hydrogen sulphide exhibit lower collateral effects, particularly at the gastric level. In fact, H2S is an endogenous gaseous mediator with a cytoprotective role at the gastric level. In this study, we have compared the protective effects of ketoprofen with ATB-352, a hydrogen sulfide-releasing derivative of ketoprofen, in an experimental model of periodontitis in rat. Periodontitis was induced by a single intragingival injection of 1 µl LPS (10 µg/µl), Our results show that 14 h after intragingival injection of LPS, there was a high tissue damage associated with bone resorption, and in gingivomucosal tissues there was a significant expression of NF-kb p65 and pro-inflammatory cytokine as well as a higher expression of COX-2 and iNOS, activation of the apoptotic process, and also increased levels of NGF expression, often associated with a higher nociceptive perception. Treatment with ATB-352 at the dose of 20mg\kg, was able to reduce the inflammatory process associated with intragingival LPS injection and also had a positive effect on bone resorption and tissue damage.

Micronized palmitoylethanolamide reduces joint pain and glial cell activation.

OBJECTIVE AND DESIGN: Temporomandibular disorder (TMD) is a common painful condition in the temporomandibular joint (TMJ). Joint inflammation is believed to be a chief cause of pain in patients with TMD, through the release of pro-inflammatory cytokines that induce peripheral sensitization of nerve terminals followed by microglial stimulation. MATERIALS AND SUBJECT: TMJ was induced in rats with the injection of complete Freund's adjuvant (CFA) emulsion into the left TMJ capsule. TREATMENT: The present study would assess the effects of micronized palmitoylethanolamide (m-PEA) on glial activation and trigeminal hypersensitivity. METHODS: Ten mg/kg m-PEA or corresponding vehicle was administered 1 h after CFA and mechanical allodynia and edema were evaluated at 24 and 72 h after CFA injection. RESULTS: CFA-injected animals showed TMJ edema and ipsilateral mechanical allodynia accompanied by a robust growth in GFAP protein-positive satellite glial cells and activation of resident macrophages in the TG. Moreover, m-PEA administration significantly reduced the degree of TMJ damage and pain, macrophage activation in TG and up-regulation of Iba1. CONCLUSIONS: The results confirm that m-PEA could represent a novel approach for monitoring pain during trigeminal nerve sensitization.

Skeletal and Dental Effectiveness of Treatment of Class II Malocclusion With Headgear: A Systematic Review and Meta-analysis.

OBJECTIVE: To evaluate the skeletal and dental effects of headgear treatment by systematically reviewing the best available scientific evidence. MATERIALS AND METHODS: A survey of articles published up to February 2017 investigating the effects of headgear in the treatment of patients with class II malocclusion was performed using 19 electronic databases. Only randomized clinical trials and prospective controlled clinical trials investigating growing patients with class II malocclusion treated with headgear were included. Two authors performed independently study selection, data extraction, and risk of bias assessment. All pooled data analyses were performed using the random-effect model. Statistical heterogeneity was evaluated. RESULTS: In total, 6 trials were included (4 randomized clinical trials and 2 prospective controlled clinical trials), grouping data from 337 patients (170 treated patients and 167 untreated controls). The ages of the patients varied across the studies, but the majority of the trials had a sample with an age range between 8 and 9 years. The times of daily wear of the appliance varied across studies from 8 to 14 h/d. The significant mean differences in treatment effects compared with the untreated controls were -1.41° per year for SNA angle cephalometric parameter (95% confidence interval [CI]: -2.25° to -0.56°), -0.57 mm/y for anterior maxillary displacement (95% CI: -0.75 to -0.40 mm), -1.42° per year for ANB angle cephalometric parameter (95% CI: -2.12° to -0.72°), and -1.31 mm/y for the overjet cephalometric parameter (95% CI: -2.34 to -0.29 mm). CONCLUSION: Headgear treatment is effective in restricting sagittal maxillary growth and reducing the overjet in the short term.

Digital evaluation of nasal changes induced by rapid maxillary expansion with different anchorage and appliance design.

BACKGROUND: Scientific evidence showed that rapid maxillary expansion (RME) affects naso-maxillary complex, increasing nasal width and volume. This study aimed to evaluate nasal changes induced by rapid maxillary expansion with different anchorage and appliance design by using low dose and cone beam computed tomography. METHODS: A total of 44 patients (20 males, mean age 8y 8 m ± 1y 2 m; 24 females mean age 8y 2 m ± 1y 4 m) were included in the investigation and divided into three groups according to the appliance: Hyrax-type expander anchored to permanent teeth, modified Hyrax-type expander anchored to deciduous teeth, modified Haas-type expander anchored to deciduous teeth. Maxillary expansion was performed until overcorrection and the expander was passively kept in situ for 7 months at least. All patients had three-dimensional imaging before expansion (T0) and after the retention period (T1). Nasal floor width, nasal wall width, maxillary inter-molar width were measured by means of Mimics software. The paired sample t-test was employed to assess the significance of the differences between the time points; the analysis of variance test (ANOVA) was used to compare differences between groups. RESULTS: The statistical analysis revealed significant differences between T0 and T1 for each recorded measurement in each group; no significant differences were found by comparing groups. CONCLUSIONS: Rapid maxillary expansion produces a significant skeletal transverse expansion of nasal region in growing patients. No significant differences in nasal effects are expected when the appliance is anchored onto deciduous teeth, with or without the palatal acrylic coverage.

Indirect orthodontic bonding using an original 3D method compared with conventional technique: A narrative review.

As well known success in orthodontics is related to a correct diagnosis and to a carefull treatment planning. Our study aims to provide clinician with a reproducible and precise method, for orthodontic indirect bonding, thanks to CBCT images and due to a CAD-CAM process. METHODS: A case of an orthodontic treatment plan, of a female patient, 37 years old, was selected. Plaster models were digitally acquired using the Extra-Oral scanner Maestro 3D and processed within the Studio Maestro 3D software. CBCT images in DICOM format were imported into the MIMICS software, in order to perform the segmentation of the dental elements, and to obtain a three-dimensional coronal-root dental arches model. The DICOM file thus processed was exported in an STL file, reworked with Meshmixer software to improve image quality, and imported into the 3D Maestro software to be superimposed on the digital model. In this way a three-dimensional real model of the dental arches was developed. After an accurate orthodontic virtual set-up, we proceeded to brackets positioning on the 3D model of the dental arches. Subsequently, a virtual transfer template was created, in order to carry out the digital printing of a thermo-printed mask necessary to perform an indirect bonding of the orthodontic appliance. RESULTS: The original digital workflow proposed in this study allows the development of a real and non-ideal three-dimensional coronal-root model of the dental arches; this model can be used for indirect orthodontic bonding eliminating any errors in the expression of 1st, 2nd and 3rd order information of the pre-informed orthodontic appliance. CONCLUSIONS: Technological advancements in oral scanning and 3D printing will allow the achievement of an easy and reproducible ideal positioning of the orthodontic brackets.

Correction: Casili et al. Therapeutic Potential of BAY-117082, a Selective NLRP3 Inflammasome Inhibitor, on Metastatic Evolution in Human Oral Squamous Cell Carcinoma (OSCC). Cancers 2023, 15, 2796.

In the original publication [...].

It Is Time for a Multidisciplinary Rehabilitation Approach: A Scoping Review on Stomatognathic Diseases in Neurological Disorders.

Patients affected by neurological disorders can develop stomatognathic diseases (SD) related to decreased bite force and quality of mastication, bruxism, severe clicking and other temporomandibular disorders (TMD), which deeply affect patients' swallowing, masticatory and phonation functions and, therefore, their quality of life. The diagnosis is commonly based on medical history and physical examination, paying attention to the temporomandibular joint (TMJ) range of movements, jaw sounds and mandibular lateral deviation. Diagnostic tools such as computed tomography and magnetic resonance imaging are used instead in case of equivocal findings in the anamnesis and physical evaluation. However, stomatognathic and temporomandibular functional training has not been commonly adopted in hospital settings as part of formal neurorehabilitation. This review is aimed at describing the most frequent pathophysiological patterns of SD and TMD in patients affected by neurological disorders and their rehabilitative approach, giving some clinical suggestions about their conservative treatment. We have searched and reviewed evidence published in PubMed, Google Scholar, Scopus and Cochrane Library between 2010 and 2023. After a thorough screening, we have selected ten studies referring to pathophysiological patterns of SD/TMD and the conservative rehabilitative approach in neurological disorders. Given this, the current literature is still poor and unclear about the administration of these kinds of complementary and rehabilitative approaches in neurological patients suffering from SD and/or TMD.

Proposal of a hybrid workflow to create a device treating the nutritional disability of an infant with cleft lip and palate: Case report.

INTRODUCTION: Cleft lip-palate is the most common craniofacial congenital anomaly. Patients with Cleft lip palate require treatment with a multidisciplinary approach from birth to enable independent feeding and physiological growth. In the past, the fabrication of therapeutic devices for a child with a cleft lip palate was executed through conventional dental impression materials , with the risk of suffocation. The use of a digital workflow minimizes impression-related risks and streamlines procedures. METHODS: This study aims to propose a hybrid workflow that can combine the advantages of digital workflow with the advantages of analog workflow that can be applied daily by clinicians treating cleft lip-palate-affected patients. RESULTS: The device created was immediately accepted by the patient allowing autonomous nutrition. Evaluation of the effectiveness of the device was done by body weight assessment every 15 days. CONCLUSION: The patient had growth comparable to that of a child born healthy.

Rehabilitation of Gait and Balance in Cerebral Palsy: A Scoping Review on the Use of Robotics with Biomechanical Implications.

Cerebral palsy (CP) is a congenital and permanent neurological disorder due to non-progressive brain damage that affects gross motor functions, such as balance, trunk control and gait. CP gross motor impairments yield more challenging right foot placement during gait phases, as well as the correct direction of the whole-body center of mass with a stability reduction and an increase in falling and tripping. For these reasons, robotic devices, thanks to their biomechanical features, can adapt easily to CP children, allowing better motor recovery and enjoyment. In fact, physiotherapists should consider each pathological gait feature to provide the patient with the best possible rehabilitation strategy and reduce extra energy efforts and the risk of falling in children affected by CP.

Body Image and Psychological Impact of Dental Appearance in Adolescents with Malocclusion: A Preliminary Exploratory Study.

BACKGROUND: Body image and psychosocial functioning represent central challenges during adolescence and early adulthood. Malocclusion, defined as an irregularity in the alignment of the teeth, is known to negatively influence psychological outcomes. The current study aimed to elucidate the role of malocclusion, together with age, gender, and dental class, in body image and psychological functioning. METHODS: A total of 126 participants aged from 12 to 19 years old (mean: 15.87, SD: 2.35, female participants: 52.4%, male participants: 47.6%) were recruited. Participants were visited at the University Hospital of Messina, Italy, and completed a sociodemographic questionnaire, the Body Image Concern Inventory (I-BICI), and the Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ). RESULTS: Significant correlations were found between age, dental class, the BICI, and the PIDAQ. In particular, age showed a positive and significant correlation with PIDAQ-total score. The correlations between occlusal status and the BICI variables were all significant and positive. All correlations between occlusal status and the PIDAQ variables were all significant and positive, except for dental self-confidence. The correlations between the variables of the PIDAQ and BICI instruments were all significant and positive, except for dental self-confidence, where the directions were significant and negative. Moreover, age, gender, and occlusal status predicted BICI and PIDAQ scores. Age was a positive predictor for PIDAQ self-confidence, gender for BICI and PIDAQ total scores, along with dysmorphic symptoms, social impact, psychological impact, and aesthetic concerns. Several significant gender differences were highlighted by the analyses, with higher scores in the female group on all the BICI variables, except symptom interference, and all the PIDAQ variables, except dental self-confidence. CONCLUSIONS: Malocclusion appeared to play a central role in the psychological, representational, and psychosocial life of the participants. This research suggests that malocclusion and dental issues influence the psychological, representational, and psychosocial life of adolescents. Further research is required to examine the psychological impact of dental problems.

Evaluation of the Clinical Variables Affecting Attachment Reproduction Accuracy during Clear Aligner Therapy.

BACKGROUND: The purpose of this study was to evaluate some of the clinical variables that influence the accuracy of reproducing the planned attachment shape. The following clinical variables were considered: the template material, type of composite, and pressure application on the template during attachment curing. METHODS: In this study, the evaluated materials for the thermoplastic transfer template construction are Erkolen 0.8 (polyethylene: PE) and Erkodur 0.8 (polyethylene terephthalate glycol-PET-G), and two types of composite resins: Enaflow (light-curing low-viscosity composite resin) and Enamel plus dentina HRI (light-curing high-viscosity composite resin). Two different light-curing lamps were used: Valo cordless color with no pressure and push light pressure (SCS). The 26 models included in the study were imported into the 3 Shape Ortho System 2022 (ver. 85.0.20 3 Shape, Denmark), and attachments were virtually placed on the dental elements of the first premolar and on both sides of the first upper molars. The accuracy of the attachment reproduction was evaluated through linear and angular evaluations against the reference model (MCAD). Three physical models were obtained: model A (MA), which was printed with attachments; model B (MB) with attachments made with a PE template; and model C (MC) with attachments made with a PET-G template. RESULTS: The results showed statistically significant differences (p < 0.05) between the PE and PET-G templates with greater precision using the PET-G template. Statistically significant differences (p < 0.05) were found among the high-viscosity composite and low-viscosity composite with pressure curing. CONCLUSIONS: In light of the obtained data, using a PET-G template is recommended. The pressure application during composite curing reduces the reproduction accuracy with a low-viscosity composite.

Application of Third Molar Maturity Index (I3M) for Assessing Adult Age of 18 Years in a Southern Italian Population Sample.

OBJECTIVE: Age estimation of living or dead individuals has a strategic importance in medicine, anthropology, and forensic science, in the context of mass disasters and in civil or criminal matters such as adoption or asylum. Teeth play a major role in this context in particular, the third molars are useful for determining whether an individual has reached the legal age of 18 years because they are still in development from the age of 14. MATERIALS AND METHODS: In this study, a sample of 307 panoramic radiographs performed on healthy subjects aged between 13 and 23 was analyzed to consider the correlation between the maturity index of the third molar (I3M) and age to verify the reliability of the cutoff 0.08 indicated by Cameriere et al in a sample of Italian subjects living in the Province of Messina (Sicily, South Italy) to discern the adult subjects from the minors. STATISTICAL ANALYSIS: The analysis of 307 panoramic radiographs resulted in a sensitivity of 89.2% with a confidence interval of 95%, a specificity of 96.5% with a confidence interval of 95%, and a positive predictive value of 96.7%. RESULTS: The method proved itself reliable in estimating adulthood in the population of the Messina- Sicily, but the I3M should not be used as the sole indicator to determine whether a person is younger or older than 18 years because age estimation based on dental methods alone has limitations as the third molars suffer from many variations related to their morphology, their location, and their development. CONCLUSION: We recommend a combination of several methods that are available to increase accuracy of age estimation, depending on the different legal requirements in civil or criminal cases.

Therapeutic Potential of BAY-117082, a Selective NLRP3 Inflammasome Inhibitor, on Metastatic Evolution in Human Oral Squamous Cell Carcinoma (OSCC).

Oral squamous cell carcinoma (OSCC) is a commonly occurring head and neck cancer and it is characterized by a high metastasis grade. The aim of this study was to evaluate for the first time the effect of BAY-117082, a selective NLRP3 inflammasome inhibitor, in an in vivo orthotopic model of OSCC and its role in the invasiveness and metastasis processes in neighbor organs such as lymph node, lung, and spleen tissues. Our results demonstrated that BAY-117082 treatment, at doses of 2.5 mg/kg and 5 mg/kg, was able to significantly reduce the presence of microscopic tumor islands and nuclear pleomorphism in tongue tissues and modulate the NLRP3 inflammasome pathway activation in tongue tissues, as well as in metastatic organs such as lung and spleen. Additionally, BAY-117082 treatment modulated the epithelial-mesenchymal transition (EMT) process in tongue tissue as well as in metastatic organs such as lymph node, lung, and spleen, also reducing the expression of matrix metalloproteinases (MMPs), particularly MMP2 and MMP9, markers of cell invasion and migration. In conclusion, the obtained data demonstrated that BAY-117082 at doses of 2.5 mg/kg and 5 mg/kg were able to reduce the tongue tumor area as well as the degree of metastasis in lymph node, lung, and spleen tissues through the NLRP3 inflammasome pathway inhibition.

Does Low-Taper Root Canal Shaping Decrease the Risk of Root Fracture? A Systematic Review.

Minimal root-canal preparation has been suggested to reduce the risk of root fracture, but as a result, satisfactory cleaning and shaping do not take place. Large-scale taper instrumentation can contribute to removing infected tissue; however, it may weaken the tooth structure. The aim of this systematic review is to evaluate whether root-canal shaping with low-taper instruments decreases the risk of root fracture, compared to high-conicity shaping. A search was performed on Ovid MEDLINE, PubMed, and the Web of Science. The inclusion criteria were: studies comparing the root fracture resistance of endodontically treated teeth, shaped with low- and high-conicity taper instruments, in human trials, and via in vitro study. The review includes all types of endodontically treated teeth, with various instrument tapers. The scientific search engines produced 328 results. Only 20 of the results were evaluated after screening. Based on the articles analyzed, it is not clear whether a taper difference can determine differences in root fracture resistance. No randomized controlled trial (RCTs) with long follow-ups have been published to date. It must also be taken into account that the in vitro studies do not consider the numerous differences that there are between in vitro and clinical evaluation. The review was registered on the PROSPERO website, with the protocol number CRD42020151451.

Down Syndrome children with obstructive sleep apnea.

INTRODUCTION: Obstructive sleep apnea syndrome (OSAS) is a complex disorder with significant clinical consequences for people with Down Syndrome (DS). OSAS is frequently seen in individuals with DS and, when present, tends to be more severe than in individuals without this syndrome. EVIDENCE ACQUISITION: The analysis was carried out on PubMed, Google Scholar and Cochrane library databases. The literature review identified nine studies suitable for our evaluations according to the established inclusion criteria. EVIDENCE SYNTHESIS: The results of the study suggest that OSAS may be a common comorbidity in adolescents with DS; according to literature evidences a widespread screening and treatment in children with DS is undoubtedly useful. There is also evidence about an association between sleep disturbance and functional activities of daily living in children with DS. CONCLUSIONS: The studies reviewed confirm that OSAS appears to occur at higher rates and greater severity in the population of children with DS. However, at present, there are no reliable clinical predictors of OSAS for this population of children.

Effects of Composite Attachments on Orthodontic Clear Aligners Therapy: A Systematic Review.

This systematic review aims to highlight the differences between different clear aligner therapies that differ in the presence of attachments or in attachment configuration. Eight electronic databases were searched up to March 2020. Two authors independently proceeded to study selection, data extraction, and risk of bias assessment. The analysis of the results was carried out examining six groups of movements (mesio-distal tipping/bodily movement; anterior bucco-lingual tipping/root torque; posterior bucco-lingual tipping/expansion; intrusion; extrusion; rotation). Five clinical trials were selected and all of them showed a medium risk of bias. Literature showed that attachments mostly increase the effectiveness of orthodontic treatment with clear aligners, improving anterior root torque, rotation, and mesio-distal (M-D) movement; they are also important to increase posterior anchorage. However, some articles showed contradictory or not statistically significant results. Attachments also seem to improve intrusion, but the evidence about this movement, as well as extrusion, is lacking. No studies evaluated posterior bucco-lingual tipping/expansion. Further clinical trials are strongly suggested to clarify the influence of attachments and their number, size, shape, and position on each orthodontic movement.

Robotic Rehabilitation in Spinal Cord Injury: A Pilot Study on End-Effectors and Neurophysiological Outcomes.

Robot-aided gait training (RAGT) has been implemented to provide patients with spinal cord injury (SCI) with a physiological limb activation during gait, cognitive engagement, and an appropriate stimulation of peripheral receptors, which are essential to entrain neuroplasticity mechanisms supporting functional recovery. We aimed at assessing whether RAGT by means of an end-effector device equipped with body weight support could improve functional ambulation in patients with subacute, motor incomplete SCI. In this pilot study, 15 patients were provided with six RAGT sessions per week for eight consecutive weeks. The outcome measures were muscle strength, ambulation, going upstairs, and disease burden. Furthermore, we estimated the activation patterns of lower limb muscles during RAGT by means of surface electromyography and the resting state networks' functional connectivity (RSN-FC) before and after RAGT. Patients achieved a clinically significant improvement in the clinical outcome measures substantially up to six months post-treatment. These data were paralleled by an improvement in the stair-climbing cycle and a potentiating of frequency-specific and area-specific RSN-FC patterns. Therefore, RAGT, by means of an end-effector device equipped with body weight support, is promising in improving gait in patients with subacute, motor incomplete SCI, and it could produce additive benefit for the neuromuscular reeducation to gait in SCI when combined with conventional physiotherapy.

Psychological and Social Effects of Oral Health and Dental Aesthetic in Adolescence and Early Adulthood: An Observational Study.

BACKGROUND: Is well known that oral health and dental aesthetic have significant effects on the sociality of human beings. The aim of the present study was to assess some aspects of oral health with possible repercussions in adolescent and youth, with particular reference to gender differences. METHODS: A total of 190 subjects with female prevalence (F = 62.6%, M = 37%) and ages between 14 and 29 years old (Mean = 23.8; SD = 3.27) participated. Evaluation was carried using standardized instruments to assess quality of oral life (PIDAQ), negative impact of oral conditions (OHIP-14), and self-esteem (Rosenberg Self Esteem Scale). Correlational and difference analyses and linear regressions were performed. RESULTS: Significant gender differences were found in terms of gender, in reference to variables such as self-confidence and convictions. Positive correlations emerged between psychological impact and social impact, aesthetic concern and social impact, convictions and self-confidence, oral health with psycho-social impact, and aesthetic concern, self-esteem with oral health. Inverse correlations emerged between psycho-social impact and self-confidence, aesthetic concern and self-confidence, oral health, and self-confidence. Multivariate linear regression indicated relations between age and psychological impact, sex and self-confidence, crooked teeth and conviction. CONCLUSIONS: The impact of oral health on the psychological well-being of young people is relevant. These factors, if considered within clinical practice, can improve the quality of life of the subject.