Microplastic pollutants in water: A comprehensive review on their remediation by adsorption using various adsorbents.

Microplastics (MPs), as emerging pollutants, have attracted the attention of environmentalists, statespersons, and the scientific community over the last few decades. To address the spread of MPs in the environment, it is imperative to develop various removal techniques and materials that are effective, scalable, and ecologically benign. However, to the best of our knowledge, no review has systematically examined the removal of MPs using adsorption or provided an in-depth discussion on various adsorbents. Adsorption is an inexpensive and effective technology for wastewater treatment. Recently, many researchers have conducted studies on MP remediation using diverse adsorbent materials, such as biochar, activated carbon, sponges, carbon nanotubes, metal-layered oxides, metal-organic frameworks (MOFs), and zeolites. Each adsorbent has advantages and disadvantages. To overcome their disadvantages, researchers have been designing and developing hybrid adsorbents for MP remediation. This review provides insights into these individual adsorbents and also discusses hybrid adsorbents for MP removal. Finally, the review elaborates on future possibilities and ways to enable more efficient, scalable, and environmentally friendly MP cleanup. Overall, this review bridges the gap between contemporary MP remediation using adsorption techniques and adsorbent development.

Semiconductor quantum dots as a mechanism to enhance charge transfer processes in polymer solar cells.

The light trapping capability of thin film polymer solar absorber, composed of poly (3-hexylthiophene) and [6,6]-phenyl C61- butyric acid methyl ester (P3HT:PC60BM) blend, is improved using ZnS semiconductor quantum dots (QD) as third donor-acceptor (D:A) component. The inherent characteristics of the microwave-assisted synthesized ZnS QD, such as quantum size effect, and multiple exciton generation were leveraged in harvesting high energy photons, which resulted in a better exciton generation, dissociation, and effective charge transport in the polymer medium. The synthesized QD exhibited good phase purity, effective kinetic enhancement, and control of the aggregation process. Hence, the impact of ZnS QD on the performance of thin film polymer solar cells (TFPSC) is evident by a remarkable improvement in the measured photovoltaic parameters. Nonetheless, it is observed that the device performances are generally dependent on the concentration of the QD in the absorber layer. Consequently, the power conversion efficiency has increased by 58% at 3% concentration of QDs by weight. This is an interesting development of TFPSC fabricated under an ambient environment.

The effect of a trimetallic nanocomposite in the solar absorber layer of organic solar cells.

Bulk heterojunction (BHJ) organic solar cells were fabricated using a trimetallic nanocomposite (Ag : Zn : Ni) in the photoactive layer. The incorporation of the nanocomposite was limited to the concentrations of 4% and 6% by volume into poly(3-hexylthiophene) (P3HT) and 6-6-phenyl-C61-butyric acid methyl ester (PCBM) blend solar absorber. The newly fabricated devices were investigated in terms of the optical, electrical and morphological properties of the photoactive medium. The power conversion efficiencies (PCE) of the solar cells were found to be increased by 57% and 84% due to improved harvesting of solar radiation due to the occurrence of localized surface plasmon resonance (LSPR) effects of the metal nanocomposite. Silver : zinc : nickel (Ag : Zn : Ni) tri-metallic nanocomposites were synthesized using a chemical reduction method from silver, zinc and nickel nitrates. The nanocomposites were characterized in terms of morphology, elemental composition and crystallinity which are extensively discussed in the manuscript.

Guar gum and its composites as potential materials for diverse applications: A review.

Naturally occurring polymers are currently of prime importance among which polysaccharides occupies superior position due to their easy availability, eco- friendly and non-toxic nature. Guar gum, one of the naturally occurring polymer, is a galactomannan acquired by ground endosperm of Cyamopsis tetragonolobus or Cyamopsis psoraloides. It belongs to the family leguminosae. Presence of large number of hydroxyl groups increases its H- bonding ability when dissolved in water that enhance the viscosity and gelling properties of the guar gum solution. Based upon these properties, guar gum is used in several industries such as textile, food, petrochemical, mining and paper for varied applications. It is used as suspending, emulsifying, gelling and stabilising agent in the conventional dosage forms. Last few decades have marked the increase in development of various composites of guar gum that have intrinsic utilization in various fields. Immobilization of guar gum with the others not only enhances its properties but also enriches its utilization in numerous fields for diverse applications such as water purification, drug delivery, pharmaceutical, cosmetic and food industries, etc. Guar gum derivatives are found to have therapeutic importance in certain physiological disorders also. In this review article, we have summarized various possible composites of guar gum and their most probable applications in different fields.

Revolution from monometallic to trimetallic nanoparticle composites, various synthesis methods and their applications: A review.

Trimetallic nanoparticles are mainly formed by the combination of three different metals. The trimetallic catalysts were considerably more professional than bimetallic one. The trimetallic and bimetallic nanoparticles are of enormous attention than that of monometallic in both technological and scientific view as in these nanoparticles the catalytic properties can be tailored better than that of in the single monometallic catalyst. The trimetallic nanoparticles have been synthesized by different methods such as microwave, selective catalytic reduction, micro-emulsion, co-precipitation and hydrothermal etc. The surfaces area of trimetallic nanoparticles is comparatively unstable and thus gets simply precipitated away from their solution and ultimately resulted in their reduced catalytic activity. By using stabilizers like block copolymers, organic ligands, surfactants and dendrimers the trimetallic nanoparticles can be stabilized. The nanocomposites of trimetallics have been synthesized with inorganic and organic compounds such as: carbon, graphene, gelatin, cellulose, starch, chitosan, alginate, collagen and Al2O3 etc. Trimetallic nanoparticles are used as a catalyst due to their outstanding electrochemical catalytic activity in comparison with the monometallic or bimetallic nanoparticles.

Elucidation of photocatalysis, photoluminescence and antibacterial studies of ZnO thin films by spin coating method.

The ZnO thin films have been prepared by spin coating followed by annealing at different temperatures like 300°C, 350°C, 400°C, 450°C, 500°C & 550°C and ZnO nanoparticles have been used for photocatalytic and antibacterial applications. The morphological investigation and phase analysis of synthesized thin films well characterized by X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Photoluminescence (PL), Transmission Electron Microscopy (TEM) and Raman studies. The luminescence peaks detected in the noticeable region between 350nm to 550nm for all synthesized nanosamples are associated to the existence of defects of oxygen sites. The luminescence emission bands are observed at 487nm (blue emission), and 530nm (green emission) at the RT. It is observed that there are no modification positions of PL peaks in all ZnO nanoparticles. In the current attempt, the synthesized ZnO particles have been used photocatalytic and antibacterial applications. The antibacterial activity of characterized samples was regulated using different concentrations of synthesized ZnO particles (100µg/ml, 200µg/ml, 300µg/ml, 400µg/ml, 500µg/ml and 600µg/ml) against gram positive and gram negative bacteria (S. pnemoniae, S. aureus, E. coli and E. hermannii) using agar well diffusion assay. The increase in concentration, decrease in zone of inhibition. The prepared ZnO morphologies showed photocatalytic activity under the sunlight enhancing the degradation rate of Rhodamine-B (RhB), which is one of the common water pollutant released by textile and paper industries.