Prevalence of oral behaviours in general dental patients attending a university clinic in Italy.

BACKGROUND: Oral behaviors represent a diverse array of habits beyond the physiological behaviors of the stomatognathic system. OBJECTIVE: To describe the prevalence of different oral behaviors, as reported with the Oral Behavior Checklist (OBC-21), in a convenience sample of patients attending an Italian university clinic for routine dental cares. METHODS: In this study, charts of adult patients presenting to the dental department of a regional hospital in Trieste, Italy, from January 2018 and January 2019 were reviewed. Patients with complete files were retrieved, and those with orofacial pain complaints were excluded. OBC-21 scores and grades (score of 0 corresponding to no risk, 1-24 to low risk, and higher than 24 to high risk) were analyzed and stratified according to age and sex. RESULTS: Data from a total of 1424 patients were reported. The overall mean OBC score was 13.3 ± 9.9, with 6.7% no-risk grade, 79.6% low-risk grade, and 13.7% high-risk grade. In general, mean OBC scores decreased with increasing age. Females showed a higher frequency of high-risk grade than males. Most frequent prevalent habits included yawning (73.1%), eating between meals (66.9%) and chewing food on one side only (63.3%). Other behaviors were also highly prevalent, including pressing, touching, or holding teeth together other than while eating (52.7%) and awake clenching (47.5%). CONCLUSION: A low-risk grade of oral behaviors has been found to be frequent in our sample. Future studies are warranted to confirm these findings in larger, representative general populations and to assess if any of these habits are linked to negative effects on the stomatognathic system.

[Experimental evaluation of the occupational exposure to static magnetic fields on a 3 T magnetic resonance scanner]. / Valutazione sperimentale dell'esposizione lavorativa ai compi magnetici statici prodotti da una risonanza magnetica da 3 T.

The recent postponement until 31 October 2013 of the deadline for transposition of the EU Directive 2004/40/EC, concerning the minimum health requirementsfor the exposure of workers to the risks arising from electromagnetic fields between 0 and 300 GHz, keeps on suspending the Italian law which was aimed to implement the EU regulations on the occupational exposure to electromagnetic fields, including those generated by Magnetic Resonance Imaging (MRI) units. Waiting for the revision of the exposure limits proposed by the EU Directive taking into account results from new studies and evolution of knowledge, the time-weighted values of static magnetic field proposed by the Italian Ministry of Health (D.M 02/08/91) still survive as limits for worker's exposure. The comparison between the proposed thresholds and the time required to position patients allows to calculate how long the MRI staff can stay at different values of static magnetic field, i.e. the maximum workload of each worker. In order to evaluate more accurately how many time the members of MRI staff are near the magnet bore and the real value of worker's exposure to the static magnetic field during the handling of patients, a teslameter Metrolab THM1176-PDA was used. Personal exposure measurements on the radiologists and the radiographers who worked on a 3 T GE Healthcare Discovery 750 MR were carried out during the positioning of self-sufficient and collaborative patients. The sensor was worn at the chest level on the side that was nearest to the magnet bore. Results show wide variations occurring between individual working procedures concerning the handling of patients, especially during the initial position phase. The mean values of the time spent by radiographers inside the magnet room (B > 0.5 mT) to place the patient and to take him outside at the end of the exam were respectively 220 and 127 seconds. The mean value of the time spent by radiologists was 162 seconds when they had to insert a peripheral vein access (arm) and inject contrast medium. The time fraction spent in magnetic flux density above 200 mT was near 31% for radiographers and about 7% for radiologists. The maximum of the static magnetic field recorded was 1550 mT for radiographers and 409 mT for radiologists. The measuring system has proven to be useful in evaluating the compliance with time weighted exposure limit stated by Italian law and also to find the maximum magnetic flux density to which the staff is actually exposed. This is the quantity of significance in evaluating workers' exposure following international guidelines.

A tri-modal tissue-equivalent anthropomorphic phantom for PET, CT and multi-parametric MRI radiomics.

PURPOSE: Radiomics has emerged as an advanced image processing methodology to define quantitative imaging biomarkers for prognosis and prediction of treatment response and outcome. The development of quantitative imaging biomarkers requires careful analysis to define their accuracy, stability and reproducibility through phantom measurements. Few efforts were devoted to develop realistic anthropomorphic phantoms. In this work, we developed a multimodality image phantom suitable for PET, CT and multiparametric MRI imaging. METHODS: A tissue-equivalent gel-based mixture was designed and tested for compatibility with different imaging modalities. Calibration measurements allowed to assess gel composition to simulate PET, CT and MRI contrasts of oncological lesions. The characterized gel mixture was used to create realistic synthetic lesions (e.g. lesions with irregular shape and non-uniform image contrast), to be inserted in a standard anthropomorphic phantom. In order to show phantom usefulness, issues related to accuracy, stability and reproducibility of radiomic biomarkers were addressed as proofs-of-concept. RESULTS: The procedure for gel preparation was straightforward and the characterized gel mixture allowed to mime simultaneously oncological lesion contrast in CT, PET and MRI imaging. Proofs-of-concept studies suggested that phantom measurements can be customized for specific clinical situations and radiomic protocols. CONCLUSIONS: We developed a strategy to manufacture an anthropomorphic, tissue-equivalent, multimodal phantom to be customized on specific radiomics protocols, for addressing specific methodological issues both in mono and multicentric studies.

Patient dose during radiological examination in the follow-up of bariatric surgery.

A patient dose survey was carried out measuring the kerma-area product (KAP) values during radiological evaluation in the follow-up of bariatric surgery. The procedures were performed by three radiologists to adjust laparoscopic gastric bands and to detect postoperative complications after Roux-en-Y gastric bypass procedures to treat morbid obesity. Total fluoroscopy time, exposure factors and the overall contribution of fluoroscopy to the accumulated KAP value were recorded. The median KAP values were used to estimate organ doses and effective dose to a standard patient; the radiation risk associated with the procedures was also evaluated. The doses were smaller for one of the three radiologists, owing to a more appropriate beam collimation and a reduction of the screening time. The KAP values ranged from 1.6 to 7.1 Gy cm(2) for the laparoscopic adjustable gastric banding management, and from 3.0 and 8.3 Gy cm(2) for the radiological examinations after gastric bypass. As a whole, the effective doses associated to these procedures were between 0.5 and 2.7 mSv. The organs receiving the highest doses were not only breast, stomach, pancreas and liver, but also lungs, owing to of their high radiosensitivity, significantly contributed to the effective dose.

Effects of active music therapy on the normal brain: fMRI based evidence.

The aim of this study was to investigate the neurophysiological bases of Active Music Therapy (AMT) and its effects on the normal brain. Twelve right-handed, healthy, non-musician volunteers were recruited. The subjects underwent 2 AMT sessions based on the free sonorous-music improvisation using rhythmic and melodic instruments. After these sessions, each subject underwent 2 fMRI scan acquisitions while listening to a Syntonic (SP) and an A-Syntonic (AP) Production from the AMT sessions. A 3 T Discovery MR750 scanner with a 16-channel phased array head coil was used, and the image analysis was performed with Brain Voyager QX 2.8. The listening to SP vs AP excerpts mainly activated: (1) the right middle temporal gyrus and right superior temporal sulcus, (2) the right middle frontal gyrus and in particular the right precentral gyrus, (3) the bilateral precuneus, (4) the left superior temporal sulcus and (5) the left middle temporal gyrus. These results are consistent with the psychological bases of the AMT approach and with the activation of brain areas involved in memory and autobiographical processes, and also in personal or interpersonal significant experiences. Further studies are required to confirm these findings and to explain possible effects of AMT in clinical settings.

Patient radiation exposure during different kyphoplasty techniques.

The scope of this study was to quantify patient radiation exposure during two different techniques of kyphoplasty (KP), which differ by a cement delivery method, in order to assess whether or not one of the two used methods can reduce the patient dose. Twenty patients were examined for this investigation. One X-ray fluoroscopy unit was used for localization, navigation and monitoring of cement delivery. The patient biometric data, the setting of the fluoroscope, the exposure time and the kerma-area product (KAP) were monitored in all the procedures for anteroposterior (AP) and lateral (LL) fluoroscopic projections in order to assess the range of radiation doses imparted to the patient. Theoretical entrance skin dose (ESD) and effective dose (E) were calculated from intraoperatively measured KAP. An average ET per procedure was 1.5±0.5 min for the manual injection technique (study A) and 1.4±0.4 min for the distance delivery technique (study B) in the AP plane, while 3.2±0.7 and 5.1±0.6 min in the lateral plane, respectively. ESD was estimated as an average of 0.10±0.06 Gy for study A and 0.13±0.13 Gy for study B in the AP or/and 0.59±0.46 and 1.05±0.36 Gy in the lateral view, respectively. The cumulative mean E was 1.9±1.0 mSv procedure(-1) for study A and 3.6±0.9 mSv procedure(-1) for study B. Patient radiation exposure and associated effective dose from KP may be considerable. The technique of distance cement delivery appears to be slower than the manual injection technique and it requires a more protracted fluoroscopic control in the lateral projection, so that this system entails a higher amount of dose to the patient.

Considerations on an automatic computed tomography tube current modulation system.

The scope of this study was to evaluate the effects on radiation output and image noise varying the acquisition parameters with an automatic tube current modulation (ATCM) system in computed tomography (CT). Chest CT examinations of an anthropomorphic phantom were acquired using a GE LightSpeed VCT 64-slice tomograph. Acquisitions were performed using different pitch, slice thickness and noise index (NI) values and varying the orientation of the scanned projection radiograph (SPR). The radiation output was determined by the CT dose index (CTDIvol). Image noise was evaluated measuring the standard deviation of CT numbers in several regions of interest. The radiation output was lower if the SPR was acquired in the anterior-posterior projection. The radiation dose with the posterior-anterior SPR was higher, because the divergence of the X-ray beam magnifies the anatomical structures closest to the tube, especially the spinal column, and this leads the ATCM system to estimate higher patient attenuation values and, therefore, to select higher tube current values. The NI was inversely proportional to the square root of the CTDIvol and, with fixed NI, the CTDIvol increased as the slice thickness decreased. This study suggests some important issues to use the GE ATCM system efficiently.

Tobacco addiction and smoking status in heroin addicts under methadone vs. buprenorphine therapy.

Aims of the present investigation were: (i) to assess the prevalence of current smokers and relative smoking status among a large number of heroin addicts attending opioid-substitution therapy prevalence; (ii) to evaluate the relationship between the type (methadone, buprenorphine) and dosage of opioid substitution therapy and nicotine dependence. Three hundred and five (305) heroin addicts under opioid-substitution therapy were recruited at five Addiction Units. All participants completed a questionnaire assessing sociodemographic information, type and dose of opioid-substitution therapy, smoking history and status, Fagerström Test for Nicotine Dependence (FTND), and the Zung Self-Rating Depression scale (SDS). 298 subjects, out of 305 (97.2%) were smokers, with an average of 20.5 cigarette/day and a median FTND of 6. Our data confirmed the high prevalence of smokers among heroin addicts, the highest described in the literature to date among heroin addicts under substitution therapies, without any significant difference between methadone vs. buprenorphine therapy groups. There was no correlation between dose of methadone or buprenorphine and average number of cigarettes/day. Patients in substance abuse treatment very frequently smoke cigarettes and often die of tobacco-related diseases. Substance abuse treatment programs too often ignore tobacco use. We hope that these findings will help to incorporate smoking cessation in substance abuse treatments.

Imaging characteristics evaluation of a digital radiography system.

PURPOSE: To evaluate the physical imaging characteristics of an indirect digital radiography system used for general radiography. MATERIAL AND METHODS: The performance of the two 41x41 cm2 CsI:Tl/a-Si flat-panel detectors of a GE-Revolution XR/d digital radiography system was evaluated. Signal uniformity, dose linearity, pre-sampling and expectation Modulation Transfer Function (MTF), Noise Power Spectrum (NPS) and Detective Quantum Efficiency (DQE) were measured at 70 kVp, varying the incident dose levels, according to IEC 62220-1. The effects of anti-scatter grid on NPS were also studied. RESULTS: Both detectors have a limiting spatial resolution of 2.5 lp/mm set by the pixel pitch. Raw images demonstrated fairly good uniformity, excellent repeatability and linearity. Without the grid in the anode-cathode direction, for an 8 mGy incident dose, both pre-sampling and EMTF were greater than 0.5 and 0.2 for spatial frequencies of 1 and 2 lp/mm, respectively. At the same dose and frequencies, for one detector, DQE was greater than 0.61 and 0.20; for the other one, DQE was greater than 0.41 and 0.18. DISCUSSION AND CONCLUSIONS: The two detector panels showed different DQE curves. Namely, the table detector DQE was excellent at low dose levels but its performance appeared to degrade with increasing doses, both in mean values and in shape, whereas the wall stand detector DQE appeared to depend less strongly on dose. In any case, the DQE values obtained from this study were higher than those reported in the literature for storage phosphor Computed Radiography systems.