Biomediated synthesis, characterization, and biological applications of nickel oxide nanoparticles derived from Toona ciliata, Ficus carica and Pinus roxburghii.

Biomediated ecofriendly method for the synthesis of nickel oxide nanoparticles using plants extracts (Toona ciliata, Ficus carica and Pinus roxburghii) has been reported. The nanoparticles so obtained were characterized by various techniques such as ultraviolet-visible, powder X-ray diffraction, Fourier transform infrared spectroscopy, attenuated total reflectance spectroscopy, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, thermogravimetric analysis and fluorescence spectroscopy. Formation of nickel oxide nanoparticles was confirmed by Fourier transform infrared spectroscopy and X-ray diffraction where the former technique ascertains the formation of bond between nickel and oxygen. The nickel oxide nanoparticles were found to be crystalline cubic face centered and show intense photoluminescence emission at 416, 414 and 413 nm, respectively. The antibacterial activity was studied against gram positive and gram negative bacterial species by agar well diffusion method. The nickel oxide nanoparticles show better activity against some bacterial strains with reference to the standard drugs Ciprofloxacin and Gentamicin. The anthelmintic activity against Pheretima posthuma of nanomaterials obtained from Pinus roxburghii was found to be greater than that derived from Toona ciliata and Ficus carica using the standard drug Albendazole. This method takes the advantage of the sustainable and economic approach for the synthesis of metal oxide nanoparticles.

Malus pumila and Juglen regia plant species mediated zinc oxide nanoparticles: Synthesis, spectral characterization, antioxidant and antibacterial studies.

Zinc oxide nanoparticles derived from Malus pumila (apple) and Juglen regia (walnut) plant is an attractive area of research because of their widespread use. The use of plant material to synthesize zinc oxide nanoparticles has been considered as one of the best environmentally friendly approach. This method appears to be low-cost as compare to other conventional method of synthesis. The biosynthesized nanoparticles were characterized by Ultraviolet-visible spectroscopy (UV-visible), Fourier transform infrared spectroscopy (FT-IR), Attenuated total reflectance spectroscopy (ATR), X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX), Transmission electron Microscopy (TEM) and Dynamic light scattering (DLS). The antioxidant potential has been evaluated by 2, 2-diphenyl-1-picrylhydrazyl free radical (DPPH) assay using L-ascorbic acid as a standard. The antibacterial activity was measured by agar well diffusion method to measure the efficacy of plant species extract and extract mediated zinc oxide nanoparticles against 5 g positive bacteria namely Staphylococcus aureus (S. aureus), Streptococcus mutans (S. mutans), Streptococcus pyrogenes (S. pyrogenes), Corynebacterium diphtheriae (C. diphtheriae) and Corynebacterium xerosis (C. xerosis) and 3 g negative bacteria such as Escherichia coli (E. coli), Klebsiella pneumoniae (K. pneumoniae) and Pseudomonas aeruginosa (P. aeruginosa) bacteria with standard antibiotic for gram positive (Ciprofloxacin) and gram negative bacteria (Gentamicin).

Copper Oxide Nanomaterials Derived from Zanthoxylum armatum DC. and Berberis lycium Royle Plant Species: Characterization, Assessment of Free Radical Scavenging and Antibacterial Activity.

Copper oxide nanomaterials were synthesized by a facile sustainable biological method using two plant species (Zanthoxylum armatum DC. and Berberis lycium Royle). The formation of materials was confirmed by FT-IR, ATR, UV-visible, XRD, TEM, SEM, EDX, TGA and PL. The antibacterial activity was evaluated by agar well diffusion method to ascertain the efficacy of plant species extract and extract derived copper oxide nanomaterials against six Gram-positive bacteria namely Staphylococcus aureus, Streptococcus mutans, Streptococcus pyogenes, Corynebacterium diphtheriae, Corynebacterium xerosis, Bacillus cereus and four Gram-negative bacteria such as Klebsiella pneumonia, Escherichia coli, Pseudomonas aeruginosa and Proteus vulgaris against the standard drug, Ciprofloxacin for Gram-positive and Gentamicin for Gram-negative bacteria, respectively. In both cases, copper oxide nanomaterials were found to be sensitive in all the bacterial species. Sensitivity of copper oxide nanomaterials shows an be higher as compared to plant species extract against different bacteria. Scavenging activity of plant extracts along with nanomaterials have been accessed using previously reported protocols employing ascorbic acid as standard. Scavenging activity of copper oxide nanomaterials shows an increase with increase in concentration. The biological activity (bactericidal and scavenging efficiency) of plant derived copper oxide nanomaterials revealed that these materials can be used as potent antimicrobial agent and DPPH scavengers in industrial as well as pharmacological fields.

Synthesis, characterization and antimicrobial study of polymeric transition metal complexes of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II).

Salen ligands comprising of o-phenylenediamine (salop) and p-phenylenediamine (salpp) have been synthesized. The salen ligand, salop undergo Schiff base reaction with Formaldehyde and Barbituric acid to generate novel polymeric Schiff base, SBOPA in one instance while the second salen ligand, salpp on Schiff base reaction with formaldehyde and piperazine gives another novel polymeric Schiff base, SBPBA. These polymeric Schiff base ligands, SBOPA and SBPBA generates polymeric metal complexes in high yields on reaction with transition metal acetates, M(CH3COO)2.xH2O where M = Mn(II), Co(II), Ni(II), Cu(II) and Zn(II). The polymeric Schiff bases, SBOPA and SBPBA and their transition metal complexes were systematically characterized, using various spectroscopic techniques. The structure, composition and geometry of SBOPA and SBPBA and their metal complexes were confirmed by spectral techniques (FT-IR, and 1H NMR), elemental analysis, and electronic spectra magnetic moment. On the basis of FT-IR, 1HNMR, electronic spectra and magnetic moment values Mn(II), Co(II) and Ni(II) ion were found to have octahedral geometry while Cu(II) and Zn(II) were found to be square-planar in nature. Thermogravimetric analysis (TGA) was used to evaluate their thermal behaviour and Cu(II)-SBOPA and Cu(II)-SBPBA were found to be thermally most stable. The polymeric Schiff base ligands, SBOPA and SBPBA and their metal complexes have also been screened for their plausible antimicrobial activity. Tetracyclin and Miconazole were used as standard drug to study the antibacterial and antifungal activity respectively. The Cu(II)-SBOPA and Cu(II)-SBPBA were found to be most potent antimicrobial agents.

Comparative study of biogenically synthesized silver and gold nanoparticles of Acacia auriculiformis leaves and their efficacy against Alzheimer's and Parkinson's disease.

The present article reports the biogenic synthesis of silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) from the extract of Acacia auriculiformis (AA) leaves using biogenic approach. Several spectral and morphological studies namely UV-vis, Fourier transform infrared (FT-IR), tunneling electron microscopy along with selected area electron diffraction (TEM/SAED), scanning electron microscopy along with energy dispersive X-ray (SEM-EDX) and X-ray diffraction (XRD) were carried out which ascertains the successful formation of silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) starting from Silver nitrate and Chloroauric acid respectively. On the basis of TEM/SAED and SEM-EDX, AgNPs were found to be more regular with smaller particle size and hence they were selected for biological studies. Thermal techniques like thermo gravimetric analysis (TGA) and differential thermal analysis (DTA) were also performed to study the comparative thermal stability of AgNPs and AuNPs where AgNPs were found to be thermally more stable. Several biophysical techniques including Thioflavin T assay, ANS assay, Rayleigh scattering method and turbidity assay were also performed. These assays confirm that AgNPs possess better inhibitory property. Moreover, antioxidant activity of AgNPs was also carried out using 2,2-diphenyl-1-picrylhydrazyl (DPPH) and AgNPs were found to be good antioxidant.

Synthesis, classification and properties of hydrogels: their applications in drug delivery and agriculture.

Absorbent polymers or hydrogel polymer materials have an enhanced water retention capacity and are widely used in agriculture and medicine. The controlled release of bioactive molecules (especially drug proteins) by hydrogels and the encapsulation of living cells are some of the active areas of drug discovery research. Hydrogel-based delivery systems may result in a therapeutically advantageous outcome for drug delivery. They can provide various sequential therapeutic agents including macromolecular drugs, small molecule drugs, and cells to control the release of molecules. Due to their controllable degradability, ability to protect unstable drugs from degradation and flexible physical properties, hydrogels can be used as a platform in which various chemical and physical interactions with encapsulated drugs for controlled release in the system can be studied. Practically, hydrogels that possess biodegradable properties have aroused greater interest in drug delivery systems. The original three-dimensional structure gets broken down into non-toxic substances, thus confirming the excellent biocompatibility of the gel. Chemical crosslinking is a resource-rich method for forming hydrogels with excellent mechanical strength. But in some cases the crosslinker used in the synthesis of the hydrogels may cause some toxicity. However, the physically cross-linked hydrogel preparative method is an alternative solution to overcome the toxicity of cross-linkers. Hydrogels that are responsive to stimuli formed from various natural and synthetic polymers can show significant changes in their properties under external stimuli such as temperature, pH, light, ion changes, and redox potential. Stimulus-responsive hydrogels have a wider range of applications in biomedicine including drug delivery, gene delivery and tissue regeneration. Stimulus-responsive hydrogels loaded with multiple drugs show controlled and sustained drug release and can act as drug carriers. By integrating stimulus-responsive hydrogels, such as those with improved thermal responsiveness, pH responsiveness and dual responsiveness, into textile materials, advanced functions can be imparted to the textile materials, thereby improving the moisture and water retention performance, environmental responsiveness, aesthetic appeal, display and comfort of textiles. This review explores the stimuli-responsive hydrogels in drug delivery systems and examines super adsorbent hydrogels and their application in the field of agriculture.

Synthesis, characterization and antifungal activities of 3d-transition metal complexes of 1-acetylpiperazinyldithiocarbamate, M(acpdtc)2.

A series of mononuclear 3d-transition metal complexes of the type M(acpdtc)2 have been synthesized (where acpdtc=1-acetylpiperazinyldithiocarbamate, M=Mn(II), Fe(II), Co(II), Ni(II) and Cu(II)). The ligand and its complexes have been characterized by micro analysis (CHNS), TG/DSC, FT-IR, UV-vis, 1H NMR, magnetic susceptibility and conductance measurements. On the basis IR spectroscopy a symmetrical bidentate coordination has been observed for the 1-acetylpiperazinyldithiocarbamate moiety in all the complexes. On the basis of UV-vis spectra and magnetic susceptibility measurement a square-planar geometry has been proposed for the Ni(II) and Cu(II) complexes while the other complexes have been found to acquire a distorted-tetrahedral structure. The thermogravimetric and differential scanning calorimetric profile of the ligand indicates a two-step decomposition pattern while the complexes exhibit a three-stage thermogram forming metal sulfide as the eventual end product. The molar conductivity data of 1mM solution in DMSO of the complexes is in close accord to their non-electrolytic behaviour. The ligand and its 3d-transition metal complexes have also been tested for their antifungicidal activity by agar well diffusion method using Fusarium sp. and Sclerotina sp. The maximum activity has been observed in case of Mn(II) and Fe(II) complexes.

Interaction of organotin with piperazine derived self-assembled cylindrical bisdithiocarbamates: spectral and thermal investigations.

Few organotin complexes of the type R4Sn2L2 where R=CH3 (2), C4H9 (3), C6H5 (4), and Sn2L2Cl4 (5) (L=bis(2,2'-dithiopiperazinato-2,2'-diaminodiethylamine)) have been synthesized and suitably characterized by FT-IR, UV-vis, 1H NMR, 119Sn NMR, ESI-MS, TGA/DSC, microanalysis and room temperature molar conductivity data. On the basis of FT-IR spectral studies, a symmetrical bidentate coordination has been proposed for all the complexes while the absence of any higher peak in the ESI-MS may be corroborated with the formation of binuclear complexes. On the basis of 119Sn NMR spectroscopy, six-coordinate geometry has been observed for the Sn-center in all the complexes. The TGA/DSC profile of the complexes implies their higher stability than its precursor. However, on the basis of IDT values the stability order of the organotin complexes was found to be 4>3>2. The room temperature conductivity values of the 1 mM solution of the ligand and its complexes are found to be comparable with that of non-ionic complexes.

Synthesis and characterization of transition metal 2,6-pyridinedicarboxylic acid derivatives, interactions of Cu(II) and Ni(II) complexes with DNA in vitro.

Mononuclear complexes M(L)Cl(2) where M=Mn(II), Fe(II), Co(II), Ni(II) and Cu(II) and (L=N,N-diethylpiperazinyl,2,6-pyridinedicarboxylate), have been synthesized and characterized by elemental analysis, FT-IR, (1)H NMR spectroscopy, UV-vis, magnetic moment, TGA/DSC, cyclic voltammetry and conductivity measurement data. The spectral data suggests that the dipicolinic acid acts as a bidentate ligand and is coordinated to the metal ion through the carboxylate oxygen. The cyclic voltammogram for Cu(L)Cl(2) complex was found to display two reversible Cu(II)/Cu(I) and Cu(II)/Cu(III) redox couple. The ligand exhibits a two-step thermolytic pattern while the complexes decompose in three stages respectively. An octahedral geometry has been proposed for both the complexes. The investigation of the interaction of the complexes with calf thymus DNA has been performed with absorption spectroscopy and fluorescence quenching experiments, which showed that the complexes are avid binders of calf thymus DNA. Also the interaction of the Cu(II) and Ni(II) complexes with plasmid DNA (pUC 19) was studied using agarose gel electrophoresis. The results revealed that these complexes can act as effective DNA cleaving agents resulting in the nicked form of DNA (pUC 19) under physiological conditions. The gel was run both in the absence and presence of an oxidizing agent (H(2)O(2)). The ligand and its complexes have also been screened against microbes in order to study their antibacterial action. The results revealed that the Cu(II) complex has activity comparable with the reference drugs gentamycin and flucanzole.

Z-Acrylonitrile Derivatives: Improved Synthesis, X-ray Structure, and Interaction with Human Serum Albumin.

AIMS AND OBJECTIVE: In the synthesis of heterocyclic compounds, acrylonitrile derivatives are the most important and appropriate precursors. These compounds are the most important intermediates and subunits for the enhancement of molecules having pharmaceutical or biological interests. Nitrogen-containing compounds have received extensive consideration in the literature over the years. MATERIALS AND METHODS: A facile, economic and efficient method has been developed for the synthesis of acrylonitrile derivatives using p-nitrophenylacetonitrile and aromatic/heterocyclic aldehydes in the presence of zinc chloride at room temperature. Spectroscopic data were obtained using the following instruments: Fourier transform infrared spectra (KBr discs, 4000-400 cm-1) by Shimadzu IR-408 Perkin-Elmer 1800 instrument; 1H NMR and 13C NMR spectra by Bruker Avance-II 400 MHz using DMSO-d6 as a solvent containing TMS as the internal standard. RESULTS: To continue our ongoing studies to synthesize heterocyclic and pharmaceutical compounds by mild, facile and efficient protocols, herein we wish to report our experimental results on the synthesis of acrylonitrile derivatives, using various aromatic/heterocyclic aldehydes and p-nitrophenylacetonitrile in the presence of zinc chloride in ethanolic media at room temperature. Some of the new compounds were tested for their human serum albumin activity (HSA) while a study of interaction with HSA protein was performed for compounds 3a and 3b. The results show that compound 3b binds tightly to HSA as compared to compound 3a. CONCLUSION: It can be concluded that acrylonitrile derivatives can be synthesized by an efficient method via the reaction of p-nitrophenylacetonitrile with aromatic/heterocyclic aldehydes by the use of zinc chloride as an effective solid catalyst. The remarkable features of this procedure include excellent yields (90-95%), short reaction period (30 min.), moderate reaction environment, easy workup procedure and managing of the catalyst. This method may find a wide significance in organic synthesis for the synthesis of the Z-acrylonitrile.

Development of coordination polyureas derived from amine terminated polyurea and metal ions having 'd5', 'd7', 'd8' and 'd10' orbitals: From synthesis to applications.

Amine terminated polyureas [ATPUa] were synthesized by 'in situ' condensation polymerization of toluene diisocyanate (TDI) with equimolar ratio of ethylene diamine (ED) and water. Incorporating the completely half-filled {Mn(II) d5}, partially filled {Co(II) d7, Ni(II) d8} and fulfilled {Zn(II) d10} divalent metal ions in APTUa generated the coordination polyureas (CPa). The structure and geometry of resulting CPa was ascertained by spectral techniques, the Fourier transform (FTIR), UV-Visible and nuclear magnetic resonance (1H NMR) spectroscopy. Amorphous/semi-crystalline and rough/layered surface morphology was analyzed by X-ray diffraction analysis (XRD) and field emission scanning electron microscopy along with energy dispersive X-ray spectroscopy (FESEM/EDX). Good thermal stability was observed having the trend, ATPUa-Zn(II) > ATPUa-Mn(II) > ATPUa-Co(II) > ATPUa-Ni(II) > ATPUa [with IPDT values, 712 °C of ATPUa-Zn(II), 673 °C of ATPUa-Mn(II), 582 °C of ATPUa-Co(II), 563 °C of ATPUa-Ni(II), 488 °C of ATPUa] respectively. It was analyzed by thermo-gravimetric, differential thermal, differential scanning calorimetry and integral procedure decomposition temperature analysis (TGA/DTA/DSC/IPDT). Good adsorption/desorption behavior of CPa was analyzed with the help of batch adsorption techniques, and it was found that CPa {in order; ATPUa-Ni(II) > ATPUa-Mn(II)}can be used as effective dye adsorbent (up to 97%) for the waste water treatment. The CPa were screened for their in-vitro antimicrobial activity against six gram positive and three gram negative bacterial strains as compared to standard drug (Ciprofloxacin and Gentamicin) and moderate antimicrobial activity was observed.

Biogenic synthesis of iron oxide nanoparticles using Agrewia optiva and Prunus persica phyto species: Characterization, antibacterial and antioxidant activity.

A phytoextract mediated synthesis of iron oxide nanoparticles using Agrewia optiva (Dhaman or Biul) and Prunus persica (Peach) leaf extract as capping and stabilizing agent without using hazardous toxic chemicals via biogenic route has been studied. The biogenic method of synthesis is convenient, rapid, cost effective and ecofriendly. The green synthesized nanoparticles were characterized by Ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, Attenuated total reflectance spectroscopy, X-ray diffraction analysis, scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy and dynamic light scattering measurements. The antibacterial study was determined by agar well diffusion method to measure the efficiency of both phyto species extract and its mediated iron oxide nanoparticles against five gram positive bacterial stains such as Staphylococcus aureus (S. aureus), Streptococcus mutans (S. mutans), Streptococcus pyrogenes (S. pyrogenes), Corynebacterium diphtheriae (C. diphtheriae) and Corynebacterium xerosis (C. xerosis) and three gram negative bacterial stains such as Escherichia coli (E. coli), Klebsiella pneuomoniae (K. pneuomoniae) and Pseudomonas aeruginosa (P. aeruginosa). The antibiotic Ciprofloxacin and Gentamicin have been used as reference standard drugs for gram positive and gram negative bacterial stains, respectively. The antioxidant activity of the phyto extracts and prepared nanoparticles have been performed using 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical assay employing l-ascorbic acid as a standard.

Synthesis, spectroscopic and thermal studies of transition metal complexes derived from benzil and diethylenetriamine.

A macrocyclic ligand, bdta (where bdta=3,6,9,12,15,18-hexaaza-1,2,10,11-tetraphenyl-2,9,11,18-tetraenecyclododecane) has been prepared by cyclocondensation of benzil with diethylenetriamine which efficiently encapsulates transition as well as pseudo-transition metal ions leading to the formation of M(bdta)Cl2 type complexes [where M=Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II)]. The analytical, spectroscopic and magnetic moment data suggests an octahedral geometry for all the complexes. EPR spectra of Mn(II) and Cu(II) show considerable exchange interaction in the complex. They are non-conducting in DMSO. The TGA profile of the ligand and its complexes are identical and consists of two discreet stages. The voltammogram of Cu-complex exhibits a quasi-reversible one-electron transfer wave for Cu(II)/Cu(I) couple.

Polynuclear transition metal complexes with thiocarbohydrazide and dithiocarbamates.

Sn(tch)2{MCl2}2 was prepared from the precursor Sn(tch)2 and MCl2. It was subsequently allowed to react with diethyldithiocarbamate which yielded the trinuclear complexes of the type Sn(tch)2{M2(dtc)4}, where tch=thiocarbohydrazide, M=Mn(II), Fe(II), Co(II), Ni(II), Cu(II) and dtc=diethyldithiocarbamate. They were characterized on the basis of microanalytical, thermal (TGA/DSC), spectral (IR, UV-vis, EPR, (1)H NMR) studies, conductivity measurement and magnetic moment data. On the basis of spectral data a tetrahedral geometry has been proposed for the halide complexes, Sn(tch)2{MCl2}2 except for Cu(II) which exhibits a square planar coordination although the transition metal ion in Sn(tch)2{M2(dtc)4} achieves an octahedral geometry where the dithiocarbamato moiety acts as a symmetrical bidentate ligand. The bidentate nature has been established by the appearance of a sharp single nu(C-S) around 1000 cm(-1). A downfield shift observed in NH(a) and NH(b) protons on moving from Sn(tch)2 to Sn(tch)2{MCl2}2 is due to the drift of electrons toward metal atoms. A two-step pyrolysis has been observed in the Sn(tch)2{MCl2}2 complexes while their dithiocarbamato derivatives exhibit a three-stage degradation pattern. Finally, the in vitro antibacterial activity of Sn(tch)2{M2(dtc)4} and the mononuclear Sn(tch)2 has been carried out on bacterial strains Escherichia coli and Salmonella typhi. The compounds were found to be active against the test organisms. The activity of the complexes is enhanced with increasing concentration. The maximum activity in both the strains was achieved by cobalt(II) dithiocarbamate complex. Minimum activity was found for Sn(tch)2 which generally increases with the introduction of transition metal ion in the complex.

Herbo-mineral based Schiff base ligand and its metal complexes: Synthesis, characterization, catalytic potential and biological applications.

Schiff base ligand, (L), derived from condensation reaction of 1,7-bis-(4-hydroxy-3-methoxyphenyl)-1,6-heptadiene-3,5-dione, (curcumin), with pyridine-3-carboxamide, (nicotinamide), and its complexes of Co(II), Ni(II) and Cu(II) ions, containing 1,10-phenanthroline as auxiliary ligand were synthesized and characterized by various physico-chemical techniques. From the micro analytical data, the stoichiometry of the complexes 1:1 (metal: ligand) was ascertained. The Co(II) and Cu(II) forms octahedral complexes, while the geometric structure around Ni(II) atom can be described as square planar. The catalytic potential of the metal complexes have been evaluated by recording the rate of decomposition of hydrogen peroxide. The results reveal that the percent decomposition of H2O2increases with time and the highest value (50.50%) was recorded for Co(II) complex. The ligand and its complexes were also screened for their in vitro antibacterial activity against Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, Streptococcus pyogenes and Pseudomonas aeruginosa. The relative order of antibacterial activity against S. Pyogenes, S. aureus and E. coli is Cu(II)>Ni(II)>Co(II)>(L); while with P. aeruginosa, K. pneumoniae the order of activity is Cu(II)>Co(II)>Ni(II)>(L). The anthelmintic screening was performed using Pheretima posthuma. The order of anthelmintic activity of ligand and its complexes is [(Phen)CuLCl2]>[(Phen)CoLCl2]>[(Phen)NiL]Cl2>(L).

Synthesis, characterization, molecular docking and biological studies of self assembled transition metal dithiocarbamates of substituted pyrrole-2-carboxaldehyde.

A series of self assembled 3d transition metal dithiocarbamate, M(pdtc) [where M=Mn(II), Fe(II), Co(II), Ni(II) and Cu(II)] have been synthesized and spectroscopically characterized. The bidentate dithiocarbamate ligand Na2pdtc (Disodium-1,4-phenyldiaminobis (pyrrole-1-sulfino)dithioate) was prepared by insertion reaction of carbondisulfide with Schiff base, N,N'-bis-(1H-pyrrol-2-ylmethylene)-benzene-1,4-diamine (L1) in basic medium. The simple substitution reaction between the metal halide and Na2pdtc yielded the title complexes in moderate yields. However, the in situ procedure gives high yield with the formation of single product as evident by TLC. Elemental analysis, IR, (1)H and (13)C NMR spectra, UV-vis., magnetic susceptibility and conductance measurements were done to characterize the complexes, M(pdtc). All the evidences suggest that the complexes have tetrahedral geometry excepting Cu(II) which is found to be square planar. A symmetrical bidentate coordination of the dithiocarbamato moiety has been observed in all the complexes. The conductivity data show that the complexes are non-electrolyte in nature. The anti-oxidant activity of the ligand, Na2pdtc and its transition metal complexes, M(pdtc) have been carried out using DPPH and Cu(pdtc) was found to be most effective. The anti-microbial activity of the Na2pdtc and M(pdtc) complexes have been carried out and on this basis the molecular docking study of the most effective complex, Cu(pdtc) has also been reported.

Potent acetylcholinesterase inhibitors: Synthesis, biological assay and docking study of nitro acridone derivatives.

The reaction of o-halobenzoic acid with aniline derivatives and their subsequent cyclization reaction yielded the acridone derivatives. The series of nitro acridone derivatives were prepared by Ullmann condensation in presence of copper as catalyst and were characterized by FTIR, (1)H, (13)C NMR and mass spectra. The structure of 5-nitro-(2-phenyl amino) benzoic acid (4) was confirmed by X-ray crystallography and was found to crystallize in P21/c space group. The in vitro efficacy of the compounds for their acetylcholinesterase (AChE) and antimicrobial inhibitory activities have been evaluated against the standard drugs Ampicillin and Gentamicin against Gram positive and Gram negative bacteria. 1,7-Dinitroacridone was found to be the most potent AChE inhibitor (IC50=0.22µM). Moreover, the compounds have been screened for their antioxidant activity using the DPPH assay. Also, docking study results were found to be in good agreement with the results obtained through in vitro experiments. The docking study further predicted possible binding conformation.

Self assembled homodinuclear dithiocarbamates: one pot synthesis and spectral characterization.

Several self assembled homodinuclear complexes of the type [M2(Ldtc)2·4H2O] derived from quadridentate ligand (Ldtc), where Ldtc = 2-aminobenzoylhydrazidebis(dithiocarbamate) and M = Mn(II), Fe(II), Co(II), Ni(II), Cu(II) and Zn(II) have been reported. The in situ procedure gives high yield with the formation of single product as evident by TLC and various other physicochemical techniques. Elemental analysis, TGA, (1)H NMR, (13)C NMR, ESI mass spectrometry, EPR, UV-vis. and IR spectroscopy were used to characterize the homodinuclear complexes. The spectroscopic evidences and room temperature magnetic moment values suggest that all the complexes have octahedral geometry around the transition metal atom. A symmetrical bidentate coordination of the dithiocarbamato moiety has been observed in all the complexes. The energy-minimized structure of the molecule also showed that each metal atom acquires a distorted octahedral geometry. The complexes exhibit a three-step thermolytic pattern and are non-electrolyte in nature.

Synthesis, characterization, thermal and antioxidant studies of potassium dihydrobisphenothiazinyl borate and its transition metal complexes.

The bidentate borate anion H(2)B(ptz)(2)(-) and its transition metal complexes have been synthesized and characterized by elemental analyses, magnetic susceptibility, electronic, IR, (1)H and (13)C NMR data. The molar conductance of 10(-3) M solution for all the complexes supports their non-ionic nature. The TGA profile of borate anion shows a single stage unlike that of two stage decomposition plot of the metal complexes. On the basis of spectroscopic studies the geometry of all the complexes have been proposed to be distorted-tetrahedral. The in vitro antioxidant and lipid oxidation inhibition of the ligand and its complexes have also been studied. The Cu[B(ptz)(2)](2) complex was found to be most effective in all the studies.

Synthesis, spectroscopic, magnetic and thermal properties of bimetallic salts, [Ni(L)][MCl4] [where M=Co(II), Zn(II), Hg(II) and L=3,7-bis(2-aminoethyl)-1,3,5,7-tetraazabicyclo(3.3.1)nonane]. X-ray structure of [Ni(L)][CoCl4].

New bimetallic complex salts corresponding to the formulation [Ni(L)][MCl(4)] have been synthesized by the facile reaction between [Ni(L)](ClO(4))(2) and [MCl(2)(PPh(3))(2)] in high yields [where M=Co(II), Zn(II), Hg(II) and L=3,7-bis(2-aminoethyl)-1,3,5,7-tetraazabicyclo(3.3.1)nonane]. The complexes were characterized by IR, electronic spectra, TGA/DSC, magnetic moment and conductivity measurements. The X-ray crystal structure for [Ni(L)][CoCl(4)] clearly establishes the cationic-anionic interaction. It crystallizes in the space group P1 with unit cell dimensions a=7.1740(15)A, b=8.1583(16)A and c=8.3102(16)A. A square-planar geometry is evident for the [Ni(L)](2+) cation while the anion is found to be tetrahedral. A two-step thermolytic pattern is observed in the pyrolysis of the bimetallic complex salts.