Tannic Acid-Based Coatings Containing Zwitterionic Copolymers for Improved Antifouling and Antibacterial Properties.

The prevention of biofilm formation on medical devices has become highly challenging in recent years due to its resistance to bactericidal agents and antibiotics, ultimately resulting in chronic infections to medical devices. Therefore, developing inexpensive, biocompatible, and covalently bonded coatings to combat biofilm formation is in high demand. Herein, we report a coating fabricated from tannic acid (TA) as an adhesive and a reducing agent to graft the zwitterionic polymer covalently in a one-step method. Subsequently, silver nanoparticles (AgNPs) are generated in situ to develop a coating with antifouling and antibacterial properties. To enhance the antifouling property and biocompatibility of the coating, the bioinspired zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) was copolymerized with 2-aminoethyl methacrylamide hydrochloride (AEMA) using conventional free-radical polymerization. AEMA moieties containing amino groups were used to facilitate the conjugation of the copolymer with quinone groups on TA through the Michael addition reaction. Three copolymers with different ratios of monomers were synthesized to understand their impacts on fouling resistance: PMPC100, p(MPC80-st-AEMA20), and p(MPC90-st-AEMA10). To impart antibacterial properties to the surface, AgNPs were formed in situ, utilizing the unreacted quinone groups on TA, which can reduce the silver ions. The successful coating of TA and copolymer onto the surfaces was confirmed by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and its excellent wettability was verified by the water contact angle (CA). Furthermore, the functionalized coatings showed antibacterial properties against E. coli and S. aureus and remarkably decreased the adhesion of the BSA protein. The surfaces can also prevent the adhesion of bacteria cells, as confirmed by the inhibition zone test. In addition, they showed negligible cytotoxicity to normal human lung fibroblast cells (MRC-5). The as-prepared coatings are potentially valuable for biomedical applications.

Mussel-Inspired Polymer-Based Coating Technology for Antifouling and Antibacterial Properties.

Zwitterionic coatings provide a promising antifouling strategy against biofouling adhesion. Quaternary ammonium cationic polymers can effectively kill bacteria on the surface, owing to their positive charges. This strategy can avoid the release of toxic biocides, which is highly desirable for constructing coatings for biomedical devices. The present work aims to develop a facile method by covalently grafting zwitterionic and cationic copolymers containing aldehydes to the remaining amine groups of self-polymerized dopamine. Reversible addition-fragmentation chain transfer polymerization was used to copolymerize either zwitterionic 2-methacryloyloxyethyl phosphorylcholine monomer (MPC) or cationic 2-(methacryloyloxy)ethyl trimethylammonium monomer (META) with 4-formyl phenyl methacrylate monomer (FPMA), and the formed copolymers poly(MPC-st-FPMA) and poly(META-st-FPMA) are denoted as MPF and MTF, respectively. MPF and MTF copolymers were then covalently grafted onto the amino groups of polydopamine-coated surfaces. PDA/MPF/MTF-coated surfaces exhibited antibacterial and antifouling properties against S. aureus, E. coli, and bovine serum albumin protein. In addition, they showed excellent viability of normal human lung fibroblast cells MRC-5. We expect the facile surface modification strategy discussed here to be applicable to medical device manufacturing.

Self-Healing Guar Gum-Based Nanocomposite Hydrogel Promotes Infected Wound Healing through Photothermal Antibacterial Therapy.

Preventing bacterial infections is a crucial aspect of wound healing. There is an urgent need for multifunctional biomaterials without antibiotics to promote wound healing. In this study, we fabricated a guar gum (GG)-based nanocomposite hydrogel, termed GBTF, which exhibited photothermal antibacterial therapy for infected wound healing. The GBTF hydrogel formed a cross-linked network through dynamic borate/diol interactions between GG and borax, thereby exhibiting simultaneously self-healing, adaptable, and injectable properties. Additionally, tannic acid (TA)/Fe3+ nanocomplexes (NCs) were incorporated into the hydrogel to confer photothermal antibacterial properties. Under the irradiation of an 808 nm near-infrared laser, the TA/Fe3+ NCs in the hydrogel could rapidly generate heat, leading to the disruption of bacterial cell membranes and subsequent bacterial eradication. Furthermore, the hydrogels exhibited good cytocompatibility and hemocompatibility, making them a precandidate for preclinical and clinical applications. Finally, they could significantly promote bacteria-infected wound healing by reducing bacterial viability, accelerating collagen deposition, and promoting epithelial remodeling. Therefore, the multifunctional GBTF hydrogel, which was composed entirely of natural substances including guar gum, borax, and polyphenol/ferric ion NCs, showed great potential for regenerating infected skin wounds in clinical applications.

Optimized Carbohydrate-Based Nanogel Formulation to Sensitize Hypoxic Tumors.

Solid tumors are often poorly vascularized, which impairs oxygen supply and drug delivery to the cells. This often leads to genetic and translational adaptations that promote tumor progression, invasion, metastasis, and resistance to conventional chemo-/radiotherapy and immunotherapy. A hypoxia-directed nanosensitizer formulation of a hypoxia-activated prodrug (HAP) was developed by encapsulating iodoazomycin arabinofuranoside (IAZA), a 2-nitroimidazole nucleoside-based HAP, in a functionally modified carbohydrate-based nanogel, facilitating delivery and accrual selectively in the hypoxic head and neck and prostate cancer cells. Although IAZA has been reported as a clinically validated hypoxia diagnostic agent, recent studies have pointed to its promising hypoxia-selective anti-tumor properties, which make IAZA an excellent candidate for further exploration as a multimodal theranostic of hypoxic tumors. The nanogels are composed of a galactose-based shell with an inner core of thermoresponsive (di(ethylene glycol) methyl ethyl methacrylate) (DEGMA). Optimization of the nanogels led to high IAZA-loading capacity (≅80-88%) and a slow time-controlled release over 50 h. Furthermore, nanoIAZA (encapsulated IAZA) displayed superior in vitro hypoxia-selective cytotoxicity and radiosensitization in comparison to free IAZA in the head and neck (FaDu) and prostate (PC3) cancer cell lines. The acute systemic toxicity profile of the nanogel (NG1) was studied in immunocompromised mice, indicating no signs of toxicity. Additionally, growth inhibition of subcutaneous FaDu xenograft tumors was observed with nanoIAZA, demonstrating that this nanoformulation offers a significant improvement in tumor regression and overall survival compared to the control.

Zwitterionic Block Copolymer Prodrug Micelles for pH Responsive Drug Delivery and Hypoxia-Specific Chemotherapy.

Tirapazamine (TPZ) and its derivatives (TPZD) have shown their great potential for efficiently killing hypoxic cancer cells. However, unsatisfactory clinical outcomes resulting from the low bioavailability of the low-molecular TPZ and TPZD limited their further applications. Precise delivery and release of these prodrugs via functional nanocarriers can significantly improve the therapeutic effects due to the targeted drug delivery and enhanced permeability and retention (EPR) effect. Herein, zwitterionic block copolymer (BCP) micelles with aldehyde functional groups are prepared from the self-assembly of poly(2-methacryloyloxyethyl phosphorylcholine-b-poly(di(ethylene glycol) methyl ether methacrylate-co-4-formylphenyl methacrylate) [PMPC-b-P(DEGMA-co-FPMA)]. TPZD is then grafted onto PMPC-b-P(DEGMA-co-FPMA) to obtain a polymer-drug conjugate, PMPC-b-P(DEGMA-co-FPMA-g-TPZD) (BCP-TPZ), through the formation of a pH-responsive imine bond, exhibiting a pH-dependent drug release profile owing to the cleavage of the imine bond under acidic conditions. Outstandingly, BCP-TPZ shows around 13.7-fold higher cytotoxicity to hypoxic cancer cells in comparison to normoxic cancer cells evaluated through an in vitro cytotoxicity assay. The pH-responsiveness and hypoxia-specific cytotoxicity confer BCP-TPZ micelles a great potential to achieve precise delivery of TPZD and thus enhance the therapeutic effect toward tumor-hypoxia.

Temperature-Responsive Aldehyde Hydrogels with Injectable, Self-Healing, and Tunable Mechanical Properties.

Injectable and self-healing hydrogels with exemplary biocompatibility and tunable mechanical properties are urgently needed due to their significant advantages for tissue engineering applications. Here, we report a new temperature-responsive aldehyde hydrogel with dual physical-cross-linked networks and injectable and self-healing properties prepared from an ABA-type triblock copolymer, poly{[FPMA(4-formylphenyl methacrylate)-co-DEGMA[di(ethylene glycol) methyl ether methacrylate]-b-MPC(2-methacryloyloxyethyl phosphorylcholine)-b-(FPMA-co-DEGMA)}. The thermoresponsive poly(DEGMA) segments drive the dehydration and hydrophobic interaction, enabling polymer chain winding as the first cross-linking network, when the temperature is raised above the critical gelation temperature. Meanwhile, the benzaldehyde groups offer physical interactions, including hydrogen bonding and hydrophobic and π-π stacking interactions as the second cross-linking network. When increasing the benzaldehyde content in the triblock copolymers from 0 to 8.2 mol %, the critical gelation temperature of the resulted hydrogels dropped from 35.5 to 19.9 °C and the mechanical modulus increased from 21 to 1411 Pa. Owing to the physical-cross-linked networks, the hydrogel demonstrated excellent injectability and self-healing properties. The cell viabilities tested from MTT assays toward both normal lung fibroblast cells (MRC-5) and cancerous cervical (HeLa) cells were found to be 100 and 101%, respectively, for varying polymer concentrations up to 1 mg/mL. The 3D cell encapsulation of the hydrogels was evaluated by a cytotoxicity Live/Dead assay, showing 92% cell viability. With these attractive physiochemical and biological properties, this temperature-responsive aldehyde hydrogel can be a promising candidate as a cell scaffold for tissue engineering.

Bioinspired dopamine and zwitterionic polymers for non-fouling surface engineering.

Biofouling is a serious problem in the medical, marine, and all other industrial fields as it poses significant health risks and financial losses. Therefore, there is a great demand for endowing surfaces with antifouling properties to mitigate biofouling. Zwitterionic polymers (containing an equimolar number of homogeneously distributed anionic and cationic groups on the polymer chains) have been used extensively as one of the best antifouling materials for surface modification. Being a superhydrophilic polymer, zwitterionic polymers need a strong binding agent to continue to remain attached to the surface for long-term applications. The use of a mussel-inspired dopamine adhesive functional layer is one of the most widely exploited approaches for the attachment of a zwitterion layer on the surface via thiol and amine chemistry. Based on recent studies, we have categorized this dopamine and zwitterion conjugation into four different approaches: (1) conjugation of dopamine with zwitterions by direct modification of zwitterions with the dopamine functional moiety; (2) co-deposition of dopamine with zwitterionic polymers; (3) zwitterionic post modification of the polydopamine (PDA) coated surface; and (4) surface-initiated polymerization of zwitterionic polymers using dopamine modified initiators. In this review, we have briefly discussed about all the possible conjugation mechanisms and reactions for this promising dopamine and zwitterion conjugation and how this conjugated system significantly contributes to the development of non-fouling surfaces along with the other applications.

Dual-Cross-Linked Network Hydrogels with Multiresponsive, Self-Healing, and Shear Strengthening Properties.

Dual-cross-linked network (DCN) hydrogels with multiresponsive and self-healing properties are attracting intensive interests due to their enhanced mechanical strength for a wide range of applications. Herein, we developed a DCN hydrogel that combines a dynamic imine and a benzoxaboronic ester with a neutral pKa value (∼7.2) as dual linkages and contains biocompatible zwitterionic poly(2-methacryloyloxyethyl phosphorylcholine) [poly(MPC)] as the backbone. Oscillatory rheology result indicated shear strengthening mechanical properties compared to the single-cross-linked network (SCN) hydrogels, which use either imine bond or benzoxaboronic ester as the linkage alone. Due to the coexistence of stimuli-responsive imine and benzoxaboronic ester, the DCN hydrogels show sensitive multiple responsiveness to pH, sugar, and hydrogen peroxide. The dynamic nature of the dual linkages endows the DCN hydrogels with excellent self-healing ability after fracture. More importantly, the excellent biocompatibility and performance in three-dimensional (3D) cell encapsulation were established by a cytotoxicity Live/Dead assay, indicating DCN hydrogel's great potential as a cell culture scaffold. The biocompatible poly(MPC)-based backbone and the rapid formation of the cross-linking network make the DCN hydrogels promising candidates for future biomedical applications.

Dual Cross-Linked Hydrogels with Injectable, Self-Healing, and Antibacterial Properties Based on the Chemical and Physical Cross-Linking.

Injectable hydrogels have become a promising material for biomedical engineering applications, but microbial infection remains a common challenge in their application. In this study, we presented an injectable antibacterial hydrogel with self-healing property based on a dual cross-linking network structure of dynamic benzoxaborole-sugar and quadruple hydrogen bonds of the 2-ureido-4-pyrimidone (UPy) moieties at physiological pH. Dynamic rheological experiments demonstrated the gelatinous behavior of the double cross-linking network (storage modulus G' > loss modulus G″), and the modulus showed frequency-dependent behavior. The noncovalent interactions of UPy units in the polymer segment endowed the injectable hydrogels with good mechanical strength. By varying the solid contents, UPy units, as well as the pH, the mechanical properties of hydrogels could be controlled. Additionally, the hydrogels exhibited not only excellent self-healing and injectable properties but also pH and sugar dual-responsiveness. Moreover, the hydrogels could effectively inhibit the growth of both Escherichia coli and Staphylococcus aureus while exhibiting low toxicity. 3D cell encapsulation experiment results also demonstrated the potential use of these hydrogels as cell culture scaffolds. Taken together, the injectability, self-healing, and antimicrobial properties of the prepared hydrogels showed great promise for translational medicine, such as cell and tissue engineering applications.

Preparation and Characterization of Thermoresponsive PEG-Based Injectable Hydrogels and Their Application for 3D Cell Culture.

We report here the synthesis of a series of ethylene glycol-based triblock copolymers containing a hydrophilic middle segment of poly(ethylene glycol) methyl ether methacrylate (PEGMA) and two temperature-responsive segments of diethylene glycol methyl ether methacrylate (DEGMA) at both ends via the reversible addition-fragmentation chain-transfer (RAFT) polymerization. While the corresponding temperature-responsive homopolymer (PDEGMA) and the diblock copolymer (PDEGMA-b-PPEGMA) could not form a gel, the triblock copolymers (PDEGMA-b-PPEGMA-b-PDEGMA) could form a physical gel at certain concentrations and at temperatures above the lower critical solution temperature (LCST). This sol-gel transition is fully reversible and can be repeated several times. Depending on the chain length of the middle block and two end blocks, a physical gel could be formed at a minimum polymer concentration of 5 wt %. In addition, a mechanically strong gel could be easily formed within 5 s at the maximum concentration of 20 wt % and at a temperature of 37 °C. Considering the good cell compatibility and soft rubbery nature of the triblock copolymers, they can potentially be used as injectable scaffold for cell culture and tissue engineering applications.

Trehalose-Based Polyethers for Cryopreservation and Three-Dimensional Cell Scaffolds.

The capability to slow ice growth and recrystallization is compulsory in the cryopreservation of cells and tissues to avoid injuries associated with the physical and chemical responses of freezing and thawing. Cryoprotective agents (CPAs) have been used to restrain cryoinjury and improve cell survival, but some of these compounds pose greater risks for the clinical application of cryopreserved cells due to their inherent toxicity. Trehalose is known for its unique physicochemical properties and its interaction with the phospholipids of the plasma membrane, which can reduce cell osmotic stress and stabilized the cryopreserved cells. Nonetheless, there has been a shortage of relevant studies on the synthesis of trehalose-based CPAs. We hereby report the synthesis and evaluation of a trehalose-based polymer and hydrogel and its use as a cryoprotectant and three-dimensional (3D) cell scaffold for cell encapsulation and organoid production. In vitro cytotoxicity studies with the trehalose-based polymers (poly(Tre-ECH)) demonstrated biocompatibility up to 100 mg/mL. High post-thaw cell membrane integrity and post-thaw cell plating efficiencies were achieved after 24 h of incubation with skin fibroblast, HeLa (cervical), and PC3 (prostate) cancer cell lines under both controlled-rate and ultrarapid freezing protocols. Differential scanning calorimetry and a splat cooling assay for the determination of ice recrystallization inhibition activity corroborated the unique properties of these trehalose-based polyethers as cryoprotectants. Furthermore, the ability to form hydrogels as 3D cell scaffolds encourages the use of these novel polymers in the development of cell organoids and cryopreservation platforms.

Tumor Microenvironment-Regulated Redox Responsive Cationic Galactose-Based Hyperbranched Polymers for siRNA Delivery.

Tumor microenvironment redox-modulated galactose-based hyperbranched polymers (HRRP) composed of 2-lactobionamidoethylmethacrylamide (LAEMA) and 2-aminoethylmethacrylamide (AEMA) with molecular weights of 10 and 20 kDa and LAEMA:AEMA ratios (L:A) of 1.5 and 1 were prepared via the reversible addition-fragmentation chain transfer (RAFT) polymerization. The remarkable capability of these polymers to respond to the glutathione (GSH) concentration in the tumor environment is the key factor that regulates their cellular internalization and enhances selective siRNA release into the cancer cell cytoplasm. HRRP with a molecular weight of 10 kDa and L:A ratio of 1.5 was capable of forming nanosized polyplexes and achieved around 85% epidermal growth factor receptor (EGFR) silencing in cervical (HeLa) cancer cells in the presence of serum protein without compromising the biocompatibility of the system (around 95% cell viability). The excellent stability of the polyplexes in serum and low cytotoxicity in normal cell lines warrants the use of this redox-responsive galactose-based cationic hyperbranched polymers in gene silencing applications at the preclinical level.

Rapid Mussel-Inspired Surface Zwitteration for Enhanced Antifouling and Antibacterial Properties.

Mussel-inspired dopamine chemistry has increasingly been used for surface modification due to its simplicity, versatility, and strong reactivity for secondary functionalization with amine or thiol containing molecules. In this work, we demonstrate a facile surface modification technique using dopamine chemistry to prepare a zwitterionic polymer coating with both antifouling and antimicrobial property. Catechol containing adhesive monomer dopamine methacrylamide (DMA) was copolymerized with bioinspired zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) monomer, and the synthesized copolymers were covalently grafted onto the amino (-NH2) rich polyethylenimine (PEI)/polydopamine (PDA) codeposited surface to obtain a stable antifouling surface. The resulting surface was later used for in situ deposition of antimicrobial silver nanoparticles (AgNPs), facilitated by the presence of catechol groups of the coating. The modified surface was characterized using X-ray photoelectron spectroscopy (XPS), water contact angle measurements, and atomic force microscopy (AFM). This dual functional coating significantly reduced the adhesion of both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus bacteria and showed excellent resistance to bovine serum albumin (BSA) adsorption. This bioinspired and efficient surface modification strategy with dual functional coating promises its potential application in implantable biomedical devices.

Hydroxyl-Rich PGMA-Based Cationic Glycopolymers for Intracellular siRNA Delivery: Biocompatibility and Effect of Sugar Decoration Degree.

The ErbB family of proteins, structurally related to the epidermal growth factor receptor (EGFR), is found to be overexpressed in many cancers such as gliomas, a lung and cervical carcinomas. Gene therapy allows to modify the expression of genes like ErbB and has been a promising strategy to target oncogenes and tumor suppressor genes. In the current work, novel hydroxyl-rich poly(glycidyl methacrylate) (PGMA)-based cationic glycopolymers were designed for intracellular small interfering RNA (siRNA) delivery to silence the EGFR gene. The cationic polymers with different sugar decoration degrees (0, 9, and 33%) were synthesized by ring-opening reaction of PGMA with ethanolamine and a lactobionic acid-derived aminosaccharide (Lac-NH2). Specific EGFR knockdown of the protein tyrosine kinase ErbB-overexpressing HeLa cells was achieved using these hydroxyl-rich polycation/siRNA complexes. Higher sugar content improved the biocompatibility of the polymers, but it also seems to decrease the EGFR knockdown capability, which should mainly be related to the surface charge of polyplexes. An optimum balance was observed with PGEL-1 (9% sugar content) formulation, achieving ∼52% knockdown efficiency as well as high cell viability. Considering the specific recognition between galactose residues and asialoglycoprotein receptor in hepatocytes, our novel PGMA-based cationic glycopolymers exhibited promising future to serve as a safe and targeting gene delivery vector to hepatoma cell line like HepG2.

Injectable, Self-Healing, and Multi-Responsive Hydrogels via Dynamic Covalent Bond Formation between Benzoxaborole and Hydroxyl Groups.

Hydrogels that are injectable, self-healing, and multiresponsive are becoming increasingly relevant for a wide range of applications. In this work, we have successfully developed a novel approach in the fabrication of smart hydrogels with all the above properties. A symmetrical ABA triblock copolymer was first synthesized via atom transfer radical polymerization with a temperature responsive middle block and two permanently hydrophilic glycopolymer chains on both ends. Hydrogels were subsequently constructed by mixing the triblock copolymer with another linear hydrophilic copolymer bearing benzoxaborole groups. The interactions of the benzoxaborole groups with the sugar hydroxyl groups allowed the formation of dynamic covalent bonds. The resulting hydrogels exhibited temperature, pH, and sugar responsiveness. Rheological studies confirmed that the mechanical property can be tuned by changing the pH as well as the galactose/benzoxaborole molar ratio. Furthermore, the hydrogels showed excellent self-healing ability and shear-thinning performance due to the inherent well-known dynamic covalent bonds of boronic esters. Therefore, these types of hydrogels can have excellent biomedical applications.

Well-Defined Cationic N-[3-(Dimethylamino)propyl]methacrylamide Hydrochloride-Based (Co)polymers for siRNA Delivery.

Cationic glycopolymers have shown to be excellent candidates for the fabrication of gene delivery devices due to their ability to electrostatically interact with negatively charged nucleic acids and the carbohydrate residues ensure enhanced stability and low toxicity of the polyplexes. The ability to engineer the polymers for optimized compositions, molecular weights, and architectures is critical in the design of effective gene delivery vehicles. Therefore, in this study, the aqueous reversible addition-fragmentation chain transfer polymerization (RAFT) was used to synthesize well-defined cationic glycopolymers with various cationic segments. For the preparation of cationic parts, N-[3-(dimethylamino)propyl]methacrylamide hydrochloride (DMAPMA·HCl), water-soluble methacrylamide monomer containing tertiary amine, was polymerized to produce DMAPMA·HCl homopolymer, which was then used as macroCTA in the block copolymerization with two other methacrylamide monomers containing different pendant groups, namely, 2-aminoethyl methacrylamide hydrochloride (AEMA) (with primary amine) and N-(3-aminopropyl) morpholine methacrylamide (MPMA) (with morpholine ring). In addition, statistical copolymers of DMAPMA.HCl with either AEMA or MPMA were also synthesized. All resulting cationic polymers were utilized as macroCTA for the RAFT copolymerization with 2-lactobionamidoethyl methacrylamide (LAEMA), which consists of the pendent galactose residues to achieve DMAPMA·HCl-based glycopolymers. From the in vitro cytotoxicity study, the cationic glycopolymers showed better cell viabilities than the corresponding cationic homopolymers. Furthermore, complexation of the cationic polymers with siRNA, cellular uptake of the resulting polyplexes, and gene knockdown efficiencies were evaluated. All cationic polymers/glycopolymers demonstrated good complexation ability with siRNA at low weight ratios. Among these cationic polymer-siRNA polyplexes, the polyplexes prepared from the two glycopolymers, P(DMAPMA65-b-LAEMA15) and P[(DMAPMA65-b-MPMA63)-b-LAEMA16], showed outstanding results in the cellular uptake, high EGFR knockdown, and low post-transfection toxicity, suggesting the great potential in siRNA delivery of these novel glycopolymers.

Acid Degradable Cationic Galactose-Based Hyperbranched Polymers as Nanotherapeutic Vehicles for Epidermal Growth Factor Receptor (EGFR) Knockdown in Cervical Carcinoma.

Strong signaling cascades derived from upregulation and overexpression of growth factors such as the EGF-family (epidermal growth factors) have been crucially related to cancer pathogenesis. Gene silencing techniques to modulate the expression of oncogenes and tumor suppresor genes are a strategy that shows great promise for cancer management but still faces some limitations in the design of biocompatible and effective vectors. In this study, we synthesized, by reversible addition-fragmentation chain transfer (RAFT) polymerization, several acid degradable galactose-based hyperbranched cationic polymers with varying molecular weights (10 to 20 kDa) and compositions with 2-lactobioamidoethyl methacrylamide [LAEMA] and 2-aminoethyl methacrylamide hydrochloride [AEMA] at different ratios (2.0, 1.0, and 0.5). These polymers were then evaluated for their ability to enhance Epidermal Growth Factor Receptor (EGFR) knockdown in cervical carcinoma. All the polymer constructs have enhanced capabilities to condensate siRNA (small interfering RNA), showing low toxicity at higher LAEMA:AEMA ratios (1.0 and 2.0). Western blot assays were conducted to quantify the EGFR expression of each treatment group demonstrating superior gene knockdown efficiency for the polymers having a LAEMA:AEMA ratio of 2.0 than the lower ratio counterparts; while maintaining low toxicity levels. Gene silencing of EGFR of up to 60% was achieved with acid degradable polymers having 10 kDa molecular weight and a LAEMA:AEMA ratio of 2.0. The superior stability of the polyplexes under physiological conditions and the low cytotoxicity observed in the 48 h post-transfection demonstrated the high potential of these acid degradable galactose-based hyperbranched cationic polymers for EGFR silencing treatment applications at the clinical level.

Injectable Self-Healing Zwitterionic Hydrogels Based on Dynamic Benzoxaborole-Sugar Interactions with Tunable Mechanical Properties.

Dynamic hydrogels based on arylboronic esters have been considered as ideal platforms for biomedical applications given their self-healing and injectable characteristics. However, there still exist some critical issues that need to be addressed or improved, including hydrogel biocompatibility, physiological usability, and tunability of mechanical properties. Here, two kinds of phospholipid bioinspired MPC copolymers, one is zwitterionic copolymer (PMB) containing a fixed 15 mol % of benzoxaborole (pKa ≈ 7.2) groups and the other is zwitterionic glycopolymers (PMG) with varied ratios of sugar groups (20%, 50%, 80%), were synthesized respectively via one-pot facile reversible addition-fragmentation chain transfer (RAFT) polymerization. PMBG hydrogels were formed spontaneously after mixing 10 wt % of PMB and PMG copolymer solutions because of dynamic benzoxaborole-sugar interactions. The mechanical properties of nine hydrogels (3 × 3) with different sugar contents and pHs (7.4, 8.4, 9.4) were carefully studied by rheological measurements, and hydrogels with higher sugar content and higher pH were found to have higher strength. Moreover, similar to other arylboronic ester-based hydrogels, PMBG hydrogels possessed not only self-healing and injectable properties but also pH/sugar responsiveness. Additionally, in vitro cytotoxicity tests of gel extracts on both normal and cancer cells further confirmed the excellent biocompatibility of the hydrogels, which should be ascribed to the biomimetic nature of phosphorylcholine (PC) and sugar residues of the copolymers. Consequently, the zwitterionic dynamic hydrogels provide promising future for diverse biomedical applications.

Controlling pre-osteoblastic cell adhesion and spreading on glycopolymer brushes of variable film thickness.

Controlling the cell behavior on biocompatible polymer surfaces is critical for the development of suitable medical implant coatings as well as in anti-adhesive applications. Synthetic glycopolymer brushes, based on sugar methacrylate monomers have been reported as robust surfaces to resist protein adsorption and cell adhesion. In this study, poly(D-gluconamidoethyl methacrylate) (PGAMA) brushes of various chain lengths were synthesized directly from initiator functionalized glass substrates using surface-initiated atom transfer radical polymerization. The glycopolymer film thicknesses were determined by ellipsometry, whereas the wettability and the morphology of the surfaces were characterized by static water contact angle measurements and atomic force microscopy, respectively. Stable, grafted films with thicknesses in the dry state between 4 and 20 nm and of low roughness (~1 nm) were obtained by varying the polymerization time. Cell experiments with MC3T3-E1 pre-osteoblasts cultured on the PGAMA brushes were performed to examine the effect of film thickness on the cell morphology, cytoskeleton organization and growth. The results revealed good cell spreading and proliferation on PGAMA layers of low film thickness, whereas cell adhesion was prevented on polymer films with thickness higher than ~10 nm, indicating their potential use in medical implants and anti-adhesive surfaces, respectively.

Flocculation and Dewatering of Mature Fine Tailings Using Temperature-Responsive Cationic Polymers.

Temperature-responsive copolymer with cationic charge was prepared with N-isopropylacrylamide (NIPAm) and 2-aminoethyl methacrylamide hydrochloride (AEMA) by conventional free-radical polymerization. The flocculation performance of the copolymer, poly(AEMA-st-NIPAm), was compared to five different mixture ratios of polyNIPAm and cationic poly(acrylamide-st-diallyldimethylammonium chloride) (poly(AAm-st-DADMAC)). The effects of polymer mixture ratios, polymer dosages, and temperature on solid-liquid separation as a function of initial settling rates (ISR), supernatant turbidity, sediment solid content, and water recovery were investigated. Poly(NIPAm) can facilitate particles aggregation by bridging and hydrogen bonding under lower critical solution temperature (LCST); whereas, at temperature above LCST, the adsorption of poly(NIPAm) chains on particles can be enhanced by hydrophobic interaction. A two-step (25 °C → 50 °C → 25 °C) consolidation can further enhance the sediment solid content by polyNIPAm. While the neutral property of polyNIPAm resulted in high turbidity of supernatant, mixing with poly(AAm-st-DADMAC) increases the clarity of supernatant by neutralization of fine particles. The copolymer poly(AEMA-st-NIPAm) functions as a polyelectrolyte to enhance the polymer adsorption onto particles via electrostatic interactions, thus further improving ISR and supernatant clarity.