Development of anti-scale poly(aspartic acid-citric acid) dual polymer systems for water treatment.

The formation of calcium sulphate and calcium carbonate scale poses major problems in heat exchangers and water cooling systems, thereby affecting the performance of these types of equipment. In order to inhibit these scale formations, new types of biodegradable water soluble single polymer and dual poly(aspartic acid-citric acid) polymers were developed and tested. The effectiveness of single polymer and four different compositions of poly aspartic acid and citric acid dual polymer systems as scale inhibitors were evaluated. Details of the synthesis, thermal stability, scale inhibition and the morphological characterization of single and dual polymers are presented in this scientific paper. It was found that the calcium sulphate scale inhibition rate was in the range 76.06-91.45%, while the calcium carbonate scale inhibition rate observed was in the range 23.37-30.0% at 65-70 °C. The finding suggests that the water soluble dual polymers are very effective in sulphate scale inhibition in comparison of calcium carbonate scale inhibition.

Synthesis and Characterization of High Viscosity Cationic Poly(Proline-Epichlorohydrin) Composite Polymer with Antibacterial Functionalities.

We report microbial resistance and catalytic activity of high viscosity cationic poly(proline-epichlorohydrin) composite (PRO-EPI) in the aqueous system. The PRO-EPI was prepared by a simple polycondensation, followed by FTIR, 1H NMR, SEM, DLS, viscosity, and DSC/TGA characterization. Several concentrations of the PRO-EPI were tested against Gram-negative (E. coli and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) microorganisms. The antimicrobial screening revealed that PRO-EPI was a potent antimicrobial agent with the least inhibitory concentrations (MICs) of 128 µg/mL against Gram-negative microorganisms. The PRO-EPI indicated no inhibitory effect against Gram-positive microorganisms. It was determined that PRO-EPI contains polymeric-quaternary ammonium compounds that inactivate the Gram-negative microorganisms by a dual mode of action and carries domains for electrostatic interaction with the microbial membrane and an intracellular target. To study the removal of toxic industrial wastewater, congo red (CR) was tested using sodium borohydride as a reducing agent. Adsorption was achieved within 20 min at a rate constant of 0.92 ks-1. UV-vis spectra showed that the removal of CR in the reaction solution was due to the breakup of the azo (-N=N-) bonds and adsorption of aromatic fragments. PRO is biodegradable and non-toxic, and PRO-EPI was found to be both antimicrobial and also acts as a catalyst for the removal of congo red dye.

Sorption isotherms, kinetic and optimization process of amino acid proline based polymer nanocomposite for the removal of selected textile dyes from industrial wastewater.

In this article, adsorption and kinetic studies were carried out on three textile dyes, namely Reactive Blue 222 (RB 222), Reactive Red 195 (RR 195) and Reactive Yellow 145 (RY 145). The dyes studied in a mixture were adsorbed under various conditions onto PRO-BEN, a bentonite modified with a new cationic proline polymer (l-proline-epichlorohydrin polymer). The proline polymer was characterized by 1H NMR, Fourier transform infrared spectroscopy (FT-IR), dynamic light scattering (DLS) and TEM. The PRO-BEN composite was characterized by FT-IR, dynamic light scattering (DLS) (zeta potential), TEM imaging, SEM/EDX and X-ray photoelectron spectroscopy (characterize the binding energy). During adsorption studies, factors involving pH, temperature, the initial concentrations of the dyes and the quantity of PRO-BEN used during adsorption were established. The results revealed that the adsorption mechanism was categorized by the Langmuir type 1 isotherm. The adsorption data followed the pseudo-second order kinetic model. The intraparticle diffusion model indicated that adsorption did not only depend on the intraparticle diffusion of the dyes. The thermodynamic parameters verified that the adsorption process was spontaneous and exothermic. The Gibbs free energy values indicated that physisorption had occurred. Successful adsorption of dyes from an industrial effluent was achieved. Desorption studies concluded that PRO-BEN desorbed the dyes better than alumina. This can thereby be viewed as a recyclable remediation material. The PRO-BEN composite could be a cost efficient alternative towards the removal of organic dyes in wastewater treatment.