Synthesis and properties of fluorescent 4'-azulenyl-functionalized 2,2':6',2″-terpyridines.

4'-Azulenyl-substituted terpyridines were efficiently synthesized following the Kröhnke methodology via azulenylchalcone intermediates. These azulenyl-containing terpyridines showed fluorescent emission with a fluorescence quantum yield varying from 0.14, in the case of parent terpyridine, to 0.64 when methyl groups are grafted on the azulenyl seven-membered ring. According to the crystal structures and TDDFT calculations, different twisting of the aromatic constituents is responsible for the observed fluorescent behavior. The electrochemical profile contains one-electron oxidation/reduction steps, which can only be explained on the basis of the redox behavior of the azulene unit. The ability of the 4'-azulenyl 2,2':6',2″-terpyridine to bind poisoning metal cations was studied by UV-vis titrations using aqueous solutions of Hg(II) and Cd(II) chlorides as illustrative examples.

Two-dimensional coordination polymers constructed using, simultaneously, linear and angular spacers and cobalt(II) nodes. New examples of networks of single-ion magnets.

Two novel bidimensional coordination polymers, [Co(azbbpy)(4,4'-bipy)0.5(DMF)(NCS)2]·MeOH (1) and [Co(azbbpy)(bpe)0.5(DMF)(NCS)2]·0.25H2O (2), resulted from the assembling of cobalt(II) ions by 1,3-bis(4-pyridyl)azulene, using either 4,4'-bipyridyl or 1,2-bis(4-pyridyl)ethylene as neutral spacers. The cobalt(II) nodes in 1 and 2 act as single-ion magnets (SIMs).

Absolute Configuration Determination of Azulenyl Diols Isolated From Asymmetric Pinacol Coupling.

A convenient enantioselective approach for the pinacol coupling of 1-acetylazulene involving easily accessible (R)- or (S)-BINOLs as chiral additive is reported. This supposes the preformation of the chiral titanium-BINOL complex in 1:2 ratio and subsequent reduction with zinc when, 2,3-di(azulen-1-yl)butane-2,3-diol can be isolated in around 60% enantiomeric excess. The absolute configuration of the isolated enantiomers was assigned by comparison of the experimental and Boltzmann-weighted calculated VCD and ECD spectra and assigned as (+)-(2S;3S)-di(azulen-1-yl)butane-2,3-diol. Chirality 27:826-834, 2015. © 2015 Wiley Periodicals, Inc.

Second order nonlinear optical properties of poled films containing azobenzenes tailored with azulen-1-yl-pyridine.

Azo compounds, which are highly versatile molecules, have attracted a considerable attention both for their fundamental properties and for practical applications, especially in photonics. The conjugated azo-aromatic systems containing 4-(R-azulen-1-yl)-2,6-dimethyl-pyridine were investigated for their nonlinear optical properties. These molecules were embedded in polymethyl methacrylate (PMMA) matrix, and the obtained guest-host systems were processed into good optical quality thin film by spin coating technique. The dipolar moments of dissolved in PMMA molecules were oriented by applying a high DC electric field at a temperature close to the polymer glass transition temperature. The second - order nonlinear optical (NLO) properties of poled films were studied by the optical second harmonic generation technique (SHG). The poling kinetics, studied by in situ SHG as well as the measured second-order NLO susceptibilities of poled films are reported and discussed.

Hybrid green bionanocomposites based on chitosan/starch/gelatin and metallic nanoparticles for biological applications.

Multicomponent composites based on natural biopolymers: chitosan, starch and gelatin in two different ratios (0.5:1:1 and 1:1:1) were in situ crosslinked by intermolecular interactions and used as matrices for zinc oxide and magnetite fillers. The bionanocomposite films have been evaluated by spectral and microscopy methods: Fourier-Transform Infrared spectrometry (FT-IR), Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) confirming the electrostatic and hydrogen bonding interactions between the components of the polymeric matrices and the inorganic fillers and the crosslinking process. AFM and SEM images showed a compact, non-porous and homogenous morphology of the hybrid films, proving a good miscibility of the blends. At lower concentrations of embedded filler, the composites were less hardened and more ductile due to the interaction with the polymeric matrix. Increased amounts of inorganic NPs led to the reduced mechanical properties of the prepared materials and increased thermal stability. The bionanocomposites revealed a similar behavior of the dielectric constant with frequency and increased values at higher temperatures. The wettability of the films' surface and the values of the water sorption capacity revealed a slight hydrophilicity of the bionanocomposites as compared with the initial matrices. The biocompatibility, evaluated by means of the surface free energy components and the interfacial tension with blood, and the hemolysis analysis demonstrated that the bionanocomposites possess a low risk of thrombosis, being promising materials for in vivo biomedical applications.

MWCNTs Composites-Based on New Chemically Modified Polysulfone Matrix for Biomedical Applications.

Polyvinyl alcohol (PVA) is a non-toxic biosynthetic polymer. Due to the hydrophilic properties of the PVA, its utilization is an easy tool to modify the properties of materials inducing increased hydrophilicity, which can be noticed in the surface properties of the materials, such as wettability. Based on this motivation, we proposed to obtain high-performance composite materials by a facile synthetic method that involves the cross-linking process of polyvinyl alcohol (PVA) with and aldehyde-functionalized polysulfone(mPSF) precursor, prior to incorporation of modified MWCNTs with hydrophilic groups, thus ensuring a high compatibility between the polymeric and the filler components. Materials prepared in this way have been compared with those based on polyvinyl alcohol and same fillers (mMWCNTs) in order to establish the influence of the polymeric matrix on the composites properties. The amount of mMWCNTs varied in both polymeric matrices between 0.5 and 5 wt%. Fourier transformed infrared with attenuated total reflectance spectroscopy (FTIR-ATR) was employed to confirm the changes noted in the PVA, mPSF and their composites. Hemolysis degree was investigated in correlation with the material structural features. Homogenous distribution of mMWCNTs in all the composite materials has been confirmed by scanning electron microscopy. The hydrophilicity of both composite systems, estimated by the contact angle method, was influenced by the presence of the filler amount mMWCNTs in both matrices (PVA and mPSF). Our work demonstrates that mPSF/mMWCNTs and PVA/mMWCNTs composite could be used as water purification or blood-filtration materials.

Design, Synthesis, and Biological Evaluation of New Azulene-Containing Chalcones.

Azulene-containing chalcones have been synthesized via Claisen-Schmidt condensation reaction. Their chemical structure has been established by spectroscopic methods where the 1H-NMR spectra suggested that the title chalcones were geometrically pure and configured trans (J = 15 Hz). The influence of functional groups from azulene-containing chalcones on the biological activity of the 2-propen-1-one unit was investigated for the first time. This study presents optical and fluorescent investigations, QSAR studies, and biological activity of 10 novel compounds. These chalcones were evaluated for their antimicrobial activity against Gram-positive and Gram-negative bacteria. The results revealed that most of the synthesized compounds showed inhibition against Gram-negative microorganisms, independent of the substitution of azulene scaffold. Instead, all azulene-containing chalcones exhibited good antifungal activity against Candida parapsilosis, with MIC values ranging between 0.156 and 0.312 mg/mL. The most active compound was chalcone containing azulene moieties on both sides of the 2-propene-1-one bond, exhibiting good activity against both bacteria-type strains and good antifungal activity. This antifungal activity combined with low toxicity makes azulene-containing chalcones a new class of bioorganic compounds.

Vanadium(V) complex with Schiff-base ligand containing a flexible amino side chain: Synthesis, structure and reactivity.

The Schiff-base ligand (H2salhyhNH3)Cl (1) derived from salicylaldehyde and 6-aminohexanoic acid hydrazide hydrochloride reacts with ammonium metavanadate in methanol solution to yield the dioxidovanadium(V) complex [VO2(salhyhNH3)] (2). The utilized hydrazone ligand contains a flexible and protonated amino side chain. Crystallization from methanol affords complex 2 in the monoclinic space group P21/n, whereas crystallization from a methanol/water mixture 1:1 yields crystals, containing a water molecule of crystallization per two formula units (2⋅1/2H2O), in the orthorhombic space group Pbcn. In both cases the protonated amino group compensates the negative charge on the dioxidovanadium moiety and is involved in an extensive hydrogen bonding network particularly including the oxido groups from neighboring vanadium complexes. The reactivity of complex 2 toward protonation in aqueous solution has been investigated by spectrophotometric titrations and is characterized by two subsequent protonation steps at the hydrazide nitrogen atom of the ligand system and an oxido group leading to the formation of an oxidohydroxidovanadium(V) species with corresponding pKa values of 3.2 and 2.9, respectively. With larger excess of acid the oxidohydroxidovanadium(V) species starts to form the corresponding anhydride. The formation of the anhydride is strongly favored in the presence of methanol. The reaction of complex 2 with hydrogen peroxide in methanol solution leads to the formation of an oxidoperoxidovanadium(V) species, whereas in aqueous solution the addition of one equivalent of acid is required. Complex 2 catalyzes the oxidation of methylphenylsulfane to the corresponding sulfoxide in methanol/dichloromethane mixture using hydrogen peroxide as oxidant at room temperature.