Visuospatial abilities and 3D-printed based learning.

PURPOSE: The use of 3D-printing in every field of medicine is expanding, notably as an educational tool. The aim of this study was to assess how visuospatial abilities (VSA) of students may impact learning helped with 3D-printed models. METHODS: Participants were undergraduate medical school students during their clinical rotation in oral and maxillofacial surgery in two French Universities. Students were included prospectively and consecutively from September 2021 to June 2023. First, a lecture about craniosynostosis was performed with the help of 3D-printed models of craniosynostotic skulls. Then, a mental rotation test (MRT) followed by a multiple-choice questions (MCQs) form about craniosynostosis presentations were submitted to the students. RESULTS: Forty undergraduate students were finally included. Median MRT score was 15 (10.75;21) and median score to the MCQs was 13 (11.75;14). There was a significantly weak correlation between the MRT-A score and the score to the MCQs (rs = 0.364; p = 0.022). A simple linear regression was calculated to predict the result to the MCQs on MRT-A score [ (F(1,39) = 281.248; p < 0.0001), with a R2 of 0.878 ]. CONCLUSION: This study showed that VSA has an impact on the recognition of complex clinical presentations, i.e. skulls with craniosynostosis. The correlation found between VSA and complex 3D shape recognition after learning aided with 3D-printed model is emphasizing the importance of VSA when using innovative technologies. Thus, VSA training should be envisioned during the curriculum.

3D-printed model for gingival flap surgery simulation: Development and pilot test.

INTRODUCTION: To assess the feasibility of a realistic model for learning oral flaps using 3D printing technology. MATERIALS AND METHODS: A mould was designed to reproduce the mandibular gingival mucosa, and a mandibular model was created using a three-dimensional printer for training undergraduate students to perform gingival flaps. After a short interview about its use, the participants were asked to use the simulator and provide feedback using a 5-point Likert questionnaire. RESULTS: The 3D-printed oral surgery flap training model was practical and inexpensive. The model was very realistic, educational and useful for hands-on training. CONCLUSIONS: 3D printing technology offers new possibilities for training in dental treatments that are currently difficult to replicate. The use of this simulator for oral flap surgery was well-received and considered promising by the participants.

ACTN3 genotype influences masseter muscle characteristics and self-reported bruxism.

OBJECTIVES: Main aim of the study was to explore the association between genetic polymorphisms in ACTN3 and bruxism. Secondary objectives included masseter muscle phenotypes assessment between bruxers and non-bruxers and according to genetic polymorphisms in ACTN3. MATERIALS AND METHODS: Fifty-four patients undergoing orthognathic surgery for correction of their malocclusion were enrolled. Self-reported bruxism and temporomandibular disorders status were preoperatively recorded. Saliva samples were used for ACTN3 genotyping. Masseter muscle samples were collected bilaterally at the time of orthognathic surgery to explore the muscle fiber characteristics. RESULTS: There were significant differences in genotypes for rs1815739 (R577X nonsense) (p = 0.001), rs1671064 (Q523R missense) (p = 0.005), and rs678397 (intronic variant) (p = 0.001) between bruxers and non-bruxers. Patients with self-reported bruxism presented a larger mean fiber area for types IIA (p = 0.035). The mean fiber areas in individuals with the wild-type CC genotype for rs1815739 (R577X) were significantly larger for type IIA fibers (1394.33 µm2 [572.77 µm2 ]) than in those with the TC and TT genotypes (832.61 µm2 [602.43 µm2 ] and 526.58 µm2 [432.21 µm2 ] [p = 0.014]). Similar results for Q523R missense and intronic variants. CONCLUSIONS: ACTN3 genotypes influence self-reported bruxism in patients with dentofacial deformity through specific masseter muscle fiber characteristics.

Simultaneous Mandibular Anterior Segmental Osteotomy and Genioplasty: A Novel Technique.

The current standard approach to treat class II malocclusion is orthodontic preparation followed by a mandibular advancement through bilateral sagittal split osteotomy associated or not with a genioplasty. However, when a malocclusion with an important incisors' axis deviation is associated with a chin malposition, an alternative technique can be considered: simultaneous mandibular anterior segmental osteotomy and genioplasty. This technique is performed without a bony bridge between osteotomies. Care must be taken not to wound the lingual mucosa. If preserved, this technique is safe. The result is stable and predictable.

Quality of Life After Total Temporomandibular Joint Prothesis Surgery.

INTRODUCTION: Total temporomandibular joint (TMJ) prostheses are increasingly used in patients with joint destruction presenting significant pain and mouth opening limitation. This surgery can be considered as the last resort solution whose goal is to restore the mandible function. The aim of this study was to evaluate the patient quality of life (QoL) before and after TMJ replacement surgery with a total TMJ prosthesis, using a modified QoL scale. MATERIALS AND METHODS: All patients with a total uni or bilateral TMJ prosthesis who could be contacted were included. All patients completed 2 retrospective questionnaires: once relative to the preoperative QoL and another for the post-operative QoL, including the assessment of mouth opening limitation, daily eating difficulties and also a QoL score, adapted from the TMJ-QoL questionnaire. RESULTS: A total of 17 patients were included: 13 temporomandibular ankylosis, 3 condylar resorptions and 1 congenital malformation. Mouth opening limitation and daily eating difficulties were significantly reduced after surgery ( P < 0.001). Nine of the 11 QoL questions showed a significant decrease in score and thus an improvement of the QoL after surgery: having a conversation ( P = 0.006), eating ( P < 0.001), yawning ( P < 0.001), sleeping ( P = 0.043), recreational activities ( P = 0.005), relaxing ( P = 0.021), feeling depressed because of TMJ problems ( P = 0.032), daily activities ( P = 0.008) and patient self-assessment of QoL ( P = 0.003). Two showed no significant difference: taking analgesics, and social life. Total score of QoL showed a significant improvement ( P = 0.003). CONCLUSIONS: Quality of life, mouth opening, and daily eating were significantly improved after total TMJ prosthesis, in agreement with the litterature. The TMJ prosthesis could be considered ealier in the management of end-stage temporomandibular disease.

Characterization of Infraorbital Nerve Sequelae After Orbital Floor or Zygomaticomaxillary Complex Fractures.

INTRODUCTION: Neurological sequelae of infraorbital nerve (ION) lesion 6 months after orbital floor or zygomaticomaxillary complex (ZMC) fractures, associated with initial ION injury, were compared according to the treatment performed and the type of fracture. The topographic and symptomatic sequelae at 6 months were described. MATERIALS AND METHODS: Patients with orbital floor or ZMC fracture associated with initial ION injury, between November 2018 and April 2020 and clinically reassessed 6 months after trauma were included. Detailed neurological symptomatology was assessed by a questionnaire. RESULTS: A total of 81 patients were included. Forty-two patients (51.8%) showed persistent neurological signs, i.e., isolated hypoesthesia in 28 patients (66.7%), isolated pain in 10 patients (23.8%) and both in 5 patients (9.5%). The most affected area was the cheek (42.8%). Thirty-eight patients (46.9%) presented associated signs, which were intermittent in 78.9% of cases. A pronounced improvement happened for 65.1% of patients and 76.7% were not or only slightly hindered in their daily activities. There were significantly more neurologic symptoms at 6 months in the surgical group than in the observational group and more in the ZMC fracture group than in the orbital floor fracture group. DISCUSSION: Neurological symptomatology was more frequent in patients treated surgically. Our results suggest the interest of a surgical decompression when orbital or ZMC fracture is associated with nerve damage but more data are needed. Neurological injury requires a careful initial clinical evaluation and regular follow-up to help patients coping, painful symptoms may benefit from specialized care.

Three-dimensional printing models improve long-term retention in medical education of pathoanatomy: A randomized controlled study.

Craniosynostosis is a rare and complex pathology, and visuospatial skills are necessary for a good understanding of the condition. While the use of three-dimensional (3D) models has improved the understanding of complex craniofacial anatomy, no study has evaluated the impact of this teaching support on long-term retention. Our randomized controlled trial was designed to compare the long-term retention of information with 3D-printed models of four types of craniosynostosis versus classic 3D reconstructions displayed in two-dimensional (2D) among undergraduate students. All students benefited from the same standardized course followed by the manipulation of the learning tool associated with the group for 15 min. Long-term retention was assessed by the capability to properly recognize different types of craniosynostosis 3 weeks after the course. Eighty-five students were enrolled. Previous educational achievements and baseline visuospatial skills were similar between the groups. The bivariate analysis showed the mean score in the 3D and 2D groups were 11.32 (2.89) and 8.08 (2.81), respectively (p < 0.0001). 3D-printed models of structures with spatial complexity such as various craniosynostosis patterns improve significantly medical students' long-term retention, indicating their educational efficacy.

3D printing for orbital volume anatomical measurement.

PURPOSE: The aim was to develop a method for reproducible orbital volume (OV) measurement in vivo based on 3D printing. METHODS: Twelve orbits were obtained from dry skulls of the Human Anatomy Department of Lille University. Computer tomography (CT) slice images of these orbits were transformed into stereo-lithography (STL) format and 3D-printed. Bone openings were closed using either putty and cellophane after printing (3D-Orb-1) or at the printing stage in silico using MeshMixer (3D-Orb-2). The results were compared with those of the conventional water-filling method as a control group (Anat-Orb). RESULTS: The observers reported a mean orbital volume of 21.3 ± 2.1 cm3 for the open-skull method, 21.2 ± 2.4 cm3 for the non-sealed 3D-printing method, and 22.2 ± 2.0 cm3 for the closed-print method. Furthermore, the intraclass correlation coefficients (ICCs) showed excellent intra-rater agreement, i.e., an ICC of 0.994 for the first observer and 0.998 for the second, and excellent interobserver agreement (ICC: 0.969). The control and 3D-Orb-1 groups show excellent agreement (ICC: 0.972). The 3D-Orb-2 exhibits moderate agreement (ICC: 0.855) with the control and appears to overestimate orbital volume slightly. CONCLUSION: Our 3D-printing method provides a standardized and reproducible method for the measurement of orbital volume.

Impaired Callus Formation in Pathological Mandibular Fractures in Medication-Related Osteonecrosis of the Jaw and Osteoradionecrosis.

PURPOSE: Nonsurgical treatment of mandibular fractures secondary to medication-related osteonecrosis of the jaw (MRONJ) or osteoradionecrosis (ORN) mostly results in nonunion, whereas nonsurgical fracture treatment of atrophic fractures can achieve favorable results in selected cases. The aim of this study was to compare callus formation in pathological mandibular fractures due to MRONJ, ORN, or extreme mandibular atrophy. METHODS: A retrospective cohort study reviewing the medical records of all MRONJ-, ORN-, or atrophy-related fractures treated at the departments of maxillofacial surgery in the Leuven or Lille university hospitals between 2010 and 2019 was undertaken. The primary predictor variable in this study was disease state (MRONJ, ORN, or extreme mandibular atrophy). The primary outcome variable was callus formation after 1 month of follow-up (present, absent). Additional study variables measured included patient age and gender. T-tests, Fisher exact tests, and multiple logistic regression were used for statistical analysis. The significance level was set at P < .05. RESULTS: Seventy patients were analyzed (12 MRONJ cases, 54 ORN fractures, 4 atrophic fractures). The callus formation prevalence in nonsurgically approached fractures secondary to ORN and MRONJ after 1 month of follow-up was 3.03% (2/66 cases). In contrast, callus was detected in all patients in the mandibular atrophy-related fracture group. Osteonecrosis was statistically correlated with impaired callus formation (P = .0121). CONCLUSION: Whereas one would expect indirect fracture healing and thus callus formation to occur in all non-surgically treated fractures, our data demonstrate its absence in the majority of MRONJ- and ORN-related fractures. Multiple plausible explanations for this phenomenon were identified: periosteal damage with loss of callus-forming cells, compromised vasculature, and bacterial colonization.

A Systematic Review of Rat Models With Temporomandibular Osteoarthritis Suitable for the Study of Emerging Prolonged Intra-Articular Drug Delivery Systems.

PURPOSE: Development of minimally invasive therapies for temporomandibular joint osteoarthritis (TMJOA) has focused on drug intra-articular injections to avoid the systemic adverse effects experienced when these substances are administered orally. Therefore, we performed a systematic review to answer the question "Which method of induction of a TMJOA-related pain model in rats leads to prolonged painful symptoms, allowing the best assessment of a sustained drug delivery system?" MATERIALS AND METHODS: Following the PRISMA guidelines, we searched MEDLINE for papers published from 1994 to July 2020 on a TMJ arthritis model using rats. We identified the means of pain induction and of nociception assessment. We assessed protocol bias using an adaptation of the QUADAS-2 tool. Animal selection, the reference standard method of pain assessment, applicability of a statistical assessment, and flow and timing were assessed. RESULTS: Of the 59 full papers we reviewed, 41 performed no pain assessment after the first 7 days following induction of the TMJ-related pain model. We eventually identified 18 long-term TMJOA-related pain models. Pain was induced by injection of toxic substances, most commonly Freund's complete adjuvant (50 µg per 50 µl), formalin at various concentrations, or monosodium iodoacetate (0,5 mg per 50 µl), into the TMJ, or by physical methods. Few studies reported data on pain after 21 days of follow-up. Heterogeneity of induction methods, pain assessment methods, and flow and timing biases precluded a meta-analysis. CONCLUSIONS: Given that pain is 1 of the main symptoms of TMJOA, experimental study protocols should include long-term pain assessment.

Temporomandibular Joint Dysplasia in Cranio-Maxillofacial Dysplasia: A Retrospective Study. Guideline Treatment Proposal.

INTRODUCTION: Cranio-Maxillofacial Dysplasias (CMD), including Craniofacial Microsomias, syndromes (such as Treacher Collins or Williams) and isolated Condylo-Mandibulo-Dysplasia, is a controversial subject with treatments as diverse as diagnostic classifications. The authors present here a retrospective study of 85 patients, with congenital condyle dysplasia arising from these 3 main types of CMD, treated with different techniques that aimed to normalize the facial skeleton and occlusion. METHODS: The authors studied retrospectively 85 patients, aged from 3 to 53 years old, affected by different types of CMD. Treatment options included: costochondral grafts, orthognathic surgeries, distraction osteogenesis procedures, orthodontic and dentofacial orthopedic treatments, and soft tissues surgeries. Outcomes were evaluated by the surgical team. RESULTS: Seventeen patients were treated with costochondral grafting, 14 with distraction osteogenesis, 17 with orthodontic and dentofacial orthopedic, and 45 with orthognathic surgery. The authors did not perform any nerve grafting or temporomandibular joints prosthesis placement. Fifty-one patients presented an excellent result, 10 a good result, 9 a poor result, 2 a bad result, and 14 an unknown result. DISCUSSION: Several different treatments of CMD can be proposed. The authors think that major defect in children should undergo costochondral grafting because of its growth potential while in case of minor defect, orthopedic treatment should be tried in the first place. Distraction osteogenesis should be reserved for cases with poor response after orthopedic treatment or growth insufficiency with costochondral grafting. Orthognathic surgery is often necessary at the end of the growth period to obtain an excellent result. Temporomandibular joints prosthesis should be reserved for extreme cases.

Surgical Management of Craniomaxillofacial Features in the Otopalatodigital Spectrum Disorders.

ABSTRACT: Otopalatodigital syndrome spectrum disorders are caused by Filamin A (FLNA) gene mutations. Otopalatodigital syndrome spectrum disorders are a group of rare congenital skeletal dysplasia, with specific craniomaxillofacial features including otopalatodigital syndrome type 1 and type 2, Melnick-Needles syndrome, frontometaphyseal dysplasia, terminal osseous dysplasia with pigmentary defects. The authors describe cases of a young girl with Melnick-Needles syndrome and a young boy with frontometaphyseal dysplasia treated in the Oral and Maxillofacial Surgery Department. Both patients had FLNA gene mutation confirmed with molecular genetic analysis. The authors proposed a 4 step treatment of the malformations with good outcomes both aesthetically and functionally, without complication.

Secondary Care of Cleft Lip and Palate: Analysis of Dentofacial Orthopedic and Orthognathic Treatments.

INTRODUCTION: Orthodontic and orthognathic management of cleft lip and/or palate (CLP) is a highly controversial subject. We present herein a retrospective study of 214 secondary cases followed over 22 years in order to assess the factors of successful management. MATERIAL AND METHODS: The study focuses on the results of gingivoperiosteoplasty, and occlusal stability. Nine subgroups were identified, taking into account the age of the patients, the history of surgery on the alveolar region, and the presence or absence of skeletal discrepancy. RESULTS: Results clearly demonstrate a higher rate of poor outcomes and failures in the multioperated population. The success rate of the graft is 80.82% in the multioperated population versus 100% non-multioperated population. Periodontitis problem or orthodontic difficulties affect 19.17% of the patient in the multioperated groups versus 12% in the other groups. Relapse, particularly the transversal dimension, is also found mostly in the multi-operated population: 17.8% versus 6% in the non-multioperated population. DISCUSSION: Several factors are involved in the success of orthodontics, dentofacial orthopedics, and orthognathic surgery of CLP patients. Our study shows that previous surgeries, especially when they are multiple with repeated failures, jeopardize the chances of success of secondary treatments. This is explained by the secondary fibrosis of the tissues around the cleft. Finally, major palatal surgeries performed early, have adverse effects on maxillary growth. Many other factors play an important role in the stability of the success that are linked with orofacial functions. These data must be taken into account in the treatment of CLP patients.

Lateral Pterygoid Muscle Biometric Modifications in Pterygoid Process Fractures Associated With Mandibular Fractures.

PURPOSE: Pterygoid process fractures (PPFs) are classically associated with Lefort fractures but can also be encountered in association with other facial fractures such as mandibular fractures. The aim of this study was to estimate the frequency of PPFs associated with mandibular fractures and identify factors associated with PPF. MATERIALS AND METHODS: We conducted a retrospective cross-sectional study using computed tomography scanning of patients having a mandibular fracture between November 2018 and April 2020. PPFs were classified using the classification by An et al. Volume, length, and width of both lateral pterygoid muscles have been evaluated by using an image processing software. Study population has been divided into 2 groups: fracture of pterygoid process or the absence of PPF. To evaluate the implication of lateral pterygoid muscle in the pathophysiology of PPF, we compared lateral pterygoid muscle volume, its maximal length, and width between both groups. Patients with bilateral fractures were excluded from this analysis. RESULTS: About 304 patients with at least 1 mandibular fracture have been included in this study. About 18 patients presenting an association of mandibular fracture and PPF were finally selected. About 83.33% of the patients were concerned by a fracture of the posterior part of the mandible. The PPF was classified as type IIA by the classification of An et al for 94.4% of patients. The lateral pterygoid muscle volumes were significantly larger on the side of the PPF (P = .02). However, there were no significant differences in the maximum length (P = .49) and width (P = .1) of lateral pterygoid muscle. CONCLUSIONS: Our study showed an association between mandibular fractures (mainly ipsilateral posterior) and isolated PPF through a lateral pterygoid muscle volume increase.

Prediction of Post-Traumatic Enophthalmos Based on Orbital Volume Measurements: A Systematic Review.

PURPOSE: Enophthalmos greater than 2 mm should be considered clinically relevant and can be responsible for esthetic and functional morbidity. The difficulty has always been the best method to use to accurately determine when the orbital wall displacement will lead to clinically relevant enophthalmos. None of the currently used techniques is able to accurately predict for post-traumatic enophthalmos (PE). The aim of the present study was to systematically review the use of orbital volumetric tools in the prediction of PE after orbital fracture. MATERIALS AND METHODS: The terms searched in each database were "(orbital volumetry) and enophthalmos," "volumetry and enophthalmos," "volume and enophthalmos," and "volumetric and enophthalmos." The relationship between PE and the orbital volume (OV) was assessed. RESULTS: The initial search yielded 346 results. Of the 346 studies, 14 were included and analyzed. Every study reported a different numerical relationship between the OV and PE, with a mean enophthalmos of 0.80 mm after a 1-cm3 increase in the OV. CONCLUSIONS: The present review found that most studies concluded that a direct relationship exists between the OV and PE and defined the degree of PE in relation to the OV expansion. Enophthalmos assessment using radiologic evaluation provides increased accuracy and reproducibility compared with clinical measurement using an exophthalmometer. It has been notoriously difficult to determine when orbital wall displacement will lead to clinically relevant enophthalmos. Measurement of the OV could have a role in the decision for surgical or conservative treatment.

Three-Dimensional Printing of Prenatal Ultrasonographic Diagnosis of Cleft Lip and Palate: Presenting the Needed "Know-How" and Discussing Its Use in Parental Education.

Parental prenatal counseling is of paramount significance since parents often experience an emotional crisis with feelings of disappointment and helplessness. Three-dimensional (3D) printed model of the unborn child's face presenting with cleft lip and palate, based on ultrasonographic information, could be used to provide visual 3D information, further enhancing the prospective parent's comprehension of their unborn child's pathology and morphology, helping them to be psychologically prepared and improving the communication with the caretaking team. Prospective parents appreciate if prenatal counseling is available with the most detailed information as well as additional resources. The technique necessary to create 3D models after ultrasonographic information is explained, and the related costs are evaluated. The use of such models in parental education is then discussed.

A New Orbito-Zygomatic Complex Reconstruction Technique Using Computer-Aided Design and Manufacturing-Assisted Harvest of Autologous Calvarial Bone in Cases of Orbito-Zygomatic Benign Tumor.

The orbito-zygomatic complex (OZC) includes several key structures, and its destruction leads to the impairment of functional activities such as nutrition, communication, nasal support, and vision. Management of benign tumors of the OZC is therefore a surgical challenge because of the necessity for reconstruction of these elements. Autogenous bone is considered the gold standard for reconstruction. Nevertheless, there is difficulty related to the complex anatomy and distorted skeletal anatomic landmarks, which require precise work in the case of bone grafts. The aim of this report is to propose a new reconstruction technique consisting of OZC reconstruction with computer-aided design and manufacturing of autologous calvarial bone. Three cases are presented. After performing tumor resection using computer-aided design and manufacturing cutting guides, we used a piezotome to perform osteotomies and preserve the periosteum and sinus mucosa. The SinpliciTi system (Materialise, Châtillon, France) allowed us to make cutting guides and a 3-dimensional surgical plan of the shapes and ideal positions of the calvarial bony plates for the OZC reconstruction. Calvarial osteotomies were performed using a piezotome through the polyamide calvarial cutting guide to obtain the shapes designed beforehand. Once the samples were collected, the shapes could be assembled ex vivo and then put in place through a minimally invasive approach. We discuss the advantages and limitations of our reconstruction method and its place in the management of OZC reconstruction.

Dental and Maxillofacial Signs in Leri-Weill Dyschondrosteosis.

One of the most common causes of short stature is a defect of the short stature homeobox-containing (SHOX) gene, which is located in pseudoautosomal region 1 on the distal end of the short arm of chromosomes Xp22.33 and Yp11.32. More than 300 different mutations in the SHOX gene responsible for short stature syndrome have been described. The phenotypic expression of SHOX haploinsufficiency is remarkably varied. The 3 typical clinical presentations, from least to most severe, are idiopathic short stature without skeletal malformations, Leri-Weill dyschondrosteosis (LWD), and Langer mesomelic dysplasia, which is believed to represent the homozygous form of LWD. Despite a higher prevalence in women, suggesting the potentiating action of high estrogen levels on the effects of SHOX deficiency, the syndrome was initially believed to have an autosomal pattern of inheritance. In reality, heterozygous SHOX mutations can be transferred from the Y to the X chromosome and vice versa. This phenomenon is called "the jumping SHOX gene" and corresponds to a pseudoautosomal dominant inheritance. LWD is characterized by mesomelic short stature and Madelung deformity defined by an upward and medial displacement of the radial joint surface, which restricts range of motion. Less specific dysmorphic signs associated with LWD, such as short hands and feet, scoliosis, or muscular hypertrophy, have been described. When reviewing the dental and maxillofacial signs, only limited and summary data (micrognathia and high arched palate) have been published in the literature. This report presents a case of LWD that highlights many other noteworthy dental and maxillofacial signs that are important to clearly identify and appropriately treat.

Fetal dental panorama on three-dimensional ultrasound imaging of cleft lip and palate and other facial anomalies.

OBJECTIVES: Craniofacial deformities have a high psychosocial impact. The aim of this paper is to improve obstetric ultrasonography and prenatal detection of facial anomalies by providing a new fetal dental panorama. MATERIAL AND METHODS: The present study describes a new modality to visualize the fetal tooth germs and an easy step-by-step diagnostic approach. Image acquisition was performed between 23 and 32 weeks of gestation using a Voluson E10 GE ultrasound machine with an RM6C transducer (GE Medical Systems, Zipf, Austria). Reconstruction was performed using Omniview from the axial image. Volume contrast imaging (VCI) was used with a thickness of 20 mm, and a render mode that combined "Rx mode" and "surface texture." RESULTS: The resulting imaging allows a more precise visualization of the fetal dental arch and can be obtained between 14 and 28 weeks of gestation. The presence of dental anomalies can be a clue for the diagnosis of various congenital defects, in particular conditions with a shortage of other physical abnormalities, such as ectodermal dysplasia and Binder syndrome. CONCLUSIONS: The creation of a precise fetal dental panorama allows an improved detection of facial deformities. CLINICAL RELEVANCE: With the current paper, we want to increase prenatal diagnostics facial anomalies, and help to establish a tailored multidisciplinary treatment plan. This paper should be of interest to readers who are currently treating patients with craniofacial malformations and readers who are performing diagnostic prenatal sonography.

Reconstruction of a Large Posttraumatic Mandibular Defect Using Bone Tissue Engineering With Fresh-Frozen Humeral Allograft Seeded With Autologous Bone Marrow Aspirate and Vascularized With a Radial Forearm Flap.

INTRODUCTION: Currently, vascularized autologous bone transplantation is considered the gold standard for large mandibular continuity defect reconstruction. Donor site morbidity is a major concern. Therefore, bone tissue engineering (BTE) seems to be the ideal solution. Fresh-frozen bone allograft is the closest material to autologous bone. The purpose of this clinical report is to show a new technique of large mandibular continuity defect reconstruction using a fresh-frozen humeral allograft seeded with autologous iliac bone marrow aspirate and vascularized with a radial forearm flap. METHODS: A 33-year-old man presented with severe cranio-facial trauma resulting in several fractures of the facial skeleton including a comminuted mandibular fracture from left parasymphysis to left angle, which caused a large continuity defect. RESULTS: Result at 6 months was aesthetically and functionally satisfactory with osseointegration of the bone graft. DISCUSSION: The authors chose to use iliac bone marrow aspirate to seed the allograft scaffold since hematopoietic stem cells and mesenchymal stem cell are able to differentiate into osteoblasts, ease of harvest of the iliac crest and its low rate of morbidity. Contemporary biomaterials used for BTE are bioceramic but bone is still the better scaffold to engineer bone and only allografting avoids donor site morbidity. Vascularization is one of the main challenges of BTE; insertion of autologous vascular bundles from pedicle or free flaps is 1 solution. The authors chose the radial forearm flap since the pedicle is long and the authors did not need a great amount of soft tissue.