Organic Electrolyte Additive: Dual Functions Toward Fast Sulfur Conversion and Stable Li Deposition for Advanced Li-S Batteries.

Lithium-sulfur (Li-S) battery is of great potential for the next generation energy storage device due to the high specific capacity energy density. However, the sluggish kinetics of S redox and the dendrite Li growth are the main challenges to hinder its commercial application. Herein, an organic electrolyte additive, i.e., benzyl chloride (BzCl), is applied as the remedy to address the two issues. In detail, BzCl can split into Bz· radical to react with the polysulfides, forming a Bz-S-Bz intermediate, which changes the conversion path of S and improves the kinetics by accelerating the S splitting. Meanwhile, a tight and robust solid electrolyte interphase (SEI) rich in inorganic ingredients namely LiCl, LiF, and Li2O, is formed on the surface of Li metal, accelerating the ion conductivity and blocking the decomposition of the solvent and lithium polysulfides. Therefore, the Li-S battery with BzCl as the additive remains high capacity of 693.2 mAh g-1 after 220 cycles at 0.5 C with a low decay rate of 0.11%. This work provides a novel strategy to boost the electrochemical performances in both cathode and anode and gives a guide on the electrolyte design toward high-performance Li-S batteries.

Electrical-Driven Directed-Evolution of Copper Nanowires Catalysts for Efficient Nitrate Reduction to Ammonia.

The electrocatalytic conversion of nitrate (NO3 -) to NH3 (NO3RR) at ambient conditions offers a promising alternative to the Haber-Bosch process. The pivotal factors in optimizing the proficient conversion of NO3 - into NH3 include enhancing the adsorption capabilities of the intermediates on the catalyst surface and expediting the hydrogenation steps. Herein, the Cu/Cu2O/Pi NWs catalyst is designed based on the directed-evolution strategy to achieve an efficient reduction of NO3‾. Benefiting from the synergistic effect of the OV-enriched Cu2O phase developed during the directed-evolution process and the pristine Cu phase, the catalyst exhibits improved adsorption performance for diverse NO3RR intermediates. Additionally, the phosphate group anchored on the catalyst's surface during the directed-evolution process facilitates water electrolysis, thereby generating Hads on the catalyst surface and promoting the hydrogenation step of NO3RR. As a result, the Cu/Cu2O/Pi NWs catalyst shows an excellent FE for NH3 (96.6%) and super-high NH3 yield rate of 1.2 mol h-1 gcat. -1 in 1 m KOH and 0.1 m KNO3 solution at -0.5 V versus RHE. Moreover, the catalyst's stability is enhanced by the stabilizing influence of the phosphate group on the Cu2O phase. This work highlights the promise of a directed-evolution approach in designing catalysts for NO3RR.

Rhenium Suppresses Iridium (IV) Oxide Crystallization and Enables Efficient, Stable Electrochemical Water Oxidation.

IrO2 as benchmark electrocatalyst for acidic oxygen evolution reaction (OER) suffers from its low activity and poor stability. Modulating the coordination environment of IrO2 by chemical doping is a methodology to suppress Ir dissolution and tailor adsorption behavior of active oxygen intermediates on interfacial Ir sites. Herein, the Re-doped IrO2 with low crystallinity is rationally designed as highly active and robust electrocatalysts for acidic OER. Theoretical calculations suggest that the similar ionic sizes of Ir and Re impart large spontaneous substitution energy and successfully incorporate Re into the IrO2 lattice. Re-doped IrO2 exhibits a much larger migration energy from IrO2 surface (0.96 eV) than other dopants (Ni, Cu, and Zn), indicating strong confinement of Re within the IrO2 lattice for suppressing Ir dissolution. The optimal catalysts (Re: 10 at%) exhibit a low overpotential of 255 mV at 10 mA cm-2 and a high stability of 170 h for acidic OER. The comprehensive mechanism investigations demonstrate that the unique structural arrangement of the Ir active sites with Re-dopant imparts high performance of catalysts by minimizing Ir dissolution, facilitating *OH adsorption and *OOH deprotonation, and lowering kinetic barrier during OER. This study provides a methodology for designing highly-performed catalysts for energy conversion.

Partially Oxidized Carbon Nanomaterials with Ni/NiO Heterostructures as Durable Glucose Sensors.

Conventional enzyme-based glucose biosensors have limited extensive applications in daily life because glucose oxidase is easily inactivated and is expensive. In this paper, we propose a strategy to prepare a new type of cost-effective, efficient, and robust nonenzymatic Ni-CNT-O for electrochemical glucose sensing. It is first followed by the pyrolysis of Ni-ABDC nanostrips using melamine to grow carbon nanotubes (CNTs) to give an intermediate product of Ni-CNT, which is further accompanied by partial oxidation to enable the facile formation of hierarchical carbon nanomaterials with improved hydrophilicity. A series of physicochemical characterizations have fully proved that Ni-CNT-O is a carbon-coated heterostructure of Ni and NiO nanoparticles embedded into coordination polymer-derived porous carbons. The obtained Ni-CNT-O exhibits a better electrocatalytic activity for glucose oxidation stemming from the synergistic effect of a metal element and a metal oxide than unoxidized Ni-CNT, which also shows high performance with a wide linear range from 1 to 3000 µM. It also offers a high sensitivity of 79.4 µA mM-1 cm-2, a low detection limit of 500 nM (S/N = 3), and a satisfactory long-term durability. Finally, this glucose sensor exhibits good reproducibility, high selectivity, as well as satisfactory results by comparing the current response of simulated serum within egg albumen.

Size-Selective Suzuki-Miyaura Coupling Reaction over Ultrafine Pd Nanocatalysts in a Water-Stable Indium-Organic Framework.

Metal nanoparticles stabilized by crystalline metal-organic frameworks (MOFs) are highly promising for green heterogeneous catalysis. In this work, in situ formed ultrafine Pd nanocatalysts with an average size of 3.14 nm have been successfully immobilized into the mesopores or defects of a water-stable indium-based MOF by the double-solvent method and subsequent reduction. Significantly, the obtained Pd@InOF-1 displays an obvious and satisfactory size-selective effect in the Suzuki-Miyaura coupling reaction between arylboronic acids and aryl bromides. On the basis of the synergistic effect, microporous InOF-1 nanorods afford a confined space for improving the selectivity of target products while Pd nanoparticles endow abundant active sites for catalysis. Herein, choosing the smallest size reactant with only one benzene ring gives the highest isolated yield of 90%, and if the size is larger, the yield is obviously reduced or even the target product could not be collected. Looking forward, this demonstrated study not only assembles a well-designed Pd@MOF composite with unique micro-nanostructures but also delivers an impressive option for cross-coupling reaction, which has implications for the further development of MOF hybrids for sustainable applications.

Self-catalytic growth of unmodified gold nanoparticles as conductive bridges mediated gap-electrical signal transduction for DNA hybridization detection.

A simple and sensitive gap-electrical biosensor based on self-catalytic growth of unmodified gold nanoparticles (AuNPs) as conductive bridges has been developed for amplifying DNA hybridization events. In this strategy, the signal amplification degree of such conductive bridges is closely related to the variation of the glucose oxidase (GOx)-like catalytic activity of AuNPs upon interaction with single- and double-stranded DNA (ssDNA and dsDNA), respectively. In the presence of target DNA, the obtained dsDNA product cannot adsorb onto the surface of AuNPs due to electrostatic interaction, which makes the unmodified AuNPs exhibit excellent GOx-like catalytic activity. Such catalytic activity can enlarge the diameters of AuNPs in the glucose and HAuCl4 solution and result in a connection between most of the AuNPs and a conductive gold film formation with a dramatically increased conductance. For the control sample, the catalytic activity sites of AuNPs are fully blocked by ssDNA due to the noncovalent interaction between nucleotide bases and AuNPs. Thus, the growth of the assembled AuNPs will not happen and the conductance between microelectrodes will be not changed. Under the optimal experimental conditions, the developed strategy exhibited a sensitive response to target DNA with a high signal-to-noise ratio. Moreover, this strategy was also demonstrated to provide excellent differentiation ability for single-nucleotide polymorphism. Such performances indicated the great potential of this label-free electrical strategy for clinical diagnostics and genetic analysis under real biological sample separation.

Ultrafine Ir nanoparticles anchored on carbon nanotubes as efficient bifunctional oxygen catalysts for Zn-air batteries.

Ultrafine iridium particles anchored on nitrogen-doped CNTs were obtained from Ir(ppy)3 and CNTs using a simple annealing method and acted as highly efficient bifunctional oxygen catalysts for Zn-air batteries. A synergistic effect, efficient *OH adsorption and rapid *OOH deprotonation were demonstrated from in situ FTIR spectroscopy, EIS and activation energy measurements.

Identification of near-infrared characteristic bands of small bowel necrosis based on cellwise detection algorithm.

The near-infrared spectroscopy is often used to distinguish small bowel necrosis due to necrotizing enterocolitis (NEC). The characteristic bands of small bowel necrosis, as an important basis for evaluating the confidence of the differentiation results, are challenging to identify quickly. In this study, we proposed to identify characteristic bands of lesion samples based on hyperspectral imaging (HSI) and cellwise outlier detection. Rabbits were used as an animal model to simulate the clinical symptoms of NEC. The rabbits were detected at intervals of 10, 30, 60, and 90 min. The characteristic bands were identified within the same rabbit, between different rabbits and at different times. The result showed the bands near 763 nm, corresponding to the absorption peak of deoxyhemoglobin, were the characteristic bands separating samples with NEC. The identification result was plausible because hypoxia was the main cause of NEC. The method was easy to perform.

Ag-Co3 O4 -CoOOH-Nanowires Tandem Catalyst for Efficient Electrocatalytic Conversion of Nitrate to Ammonia at Low Overpotential via Triple Reactions.

The electrocatalytic conversion of nitrate (NO3 ‾) to NH3  (NO3 RR) offers a promising alternative to the Haber-Bosch process. However, the overall kinetic rate of NO3 RR is plagued by the complex proton-assisted multiple-electron transfer process. Herein, Ag/Co3 O4 /CoOOH nanowires (i-Ag/Co3 O4  NWs) tandem catalyst is designed to optimize the kinetic rate of intermediate reaction for NO3 RR simultaneously. The authors proved that NO3 ‾ ions are reduced to NO2 ‾ preferentially on Ag phases and then NO2 ‾ to NO on Co3 O4  phases. The CoOOH phases catalyze NO reduction to NH3  via NH2 OH intermediate. This unique catalyst efficiently converts NO3 ‾ to NH3  through a triple reaction with a high Faradaic efficiency (FE) of 94.3% and a high NH3  yield rate of 253.7 µmol h-1  cm-2  in 1 M KOH and 0.1 M KNO3  solution at -0.25 V versus RHE. The kinetic studies demonstrate that converting NH2 OH into NH3  is the rate-determining step (RDS) with an energy barrier of 0.151 eV over i-Ag/Co3 O4  NWs. Further applying i-Ag/Co3 O4  NWs as the cathode material, a novel Zn-nitrate battery exhibits a power density of 2.56 mW cm-2  and an FE of 91.4% for NH3  production.

Adaptively Reforming Natural Enzyme to Activate Catalytic Microenvironment for Polysulfide Conversion in Lithium-Sulfur Batteries.

Catalyzing polysulfide conversion is a promising way toward accelerating complex and sluggish sulfur redox reactions (SRRs) in lithium-sulfur batteries. Reasonable alteration of an enzyme provides a new means to expand the natural enzyme universe to catalytic reactions in abiotic systems. Herein, we design and fabricate a denatured hemocyanin (DHc) to efficiently catalyze the SRR. After denaturation, the unfolded ß-sheet architectures with exposed rich atomically dispersed Cu, O, and N sites and intermolecular H-bonds are formed in DHc, which not only provides the polysulfides for a strong spatial confinement effect in microenvironment via S-O and Li···N interactions but also activates chemical channels for electron/Li+ transport into the Cu active center via H/Li-bonds to catalyze polysulfide conversion. As expected, the charge/discharge kinetics of DHc-containing cathodes is fundamentally improved in cyclability with nearly 100% Coulombic efficiency and capacity even under high sulfur loading (4.3 mg cm-2) and lean-electrolyte (8 µL mg-1) conditions.

Efficient Electrocatalytic Nitrate Reduction to Ammonia Based on DNA-Templated Copper Nanoclusters.

In alkaline solutions, the electrocatalytic conversion of nitrates to ammonia (NH3) (NO3RR) is hindered by the sluggish hydrogenation step due to the lack of protons on the electrode surface, making it a grand challenge to synthesize NH3 at a high rate and selectivity. Herein, single-stranded deoxyribonucleic acid (ssDNA)-templated copper nanoclusters (CuNCs) were synthesized for the electrocatalytic production of NH3. Because ssDNA was involved in the optimization of the interfacial water distribution and H-bond network connectivity, the water-electrolysis-induced proton generation was enhanced on the electrode surface, which facilitated the NO3RR kinetics. The activation energy (Ea) and in situ spectroscopy studies adequately demonstrated that the NO3RR was exothermic until NH3 desorption, indicating that, in alkaline media, the NO3RR catalyzed by ssDNA-templated CuNCs followed the same reaction path as the NO3RR in acidic media. Electrocatalytic tests further verified the efficiency of ssDNA-templated CuNCs, which achieved a high NH3 yield rate of 2.62 mg h-1 cm-2 and a Faraday efficiency of 96.8% at -0.6 V vs reversible hydrogen electrode. The results of this study lay the foundation for engineering catalyst surface ligands for the electrocatalytic NO3RR.

DNA-wrapped carbon nanotubes as sensitive electrochemical labels in controlled-assembly-mediated signal transduction for the detection of sequence-specific DNA.

A novel electrochemical strategy that uses DNA-wrapped carbon nanotubes (CNTs) as electrochemical labels is developed for sensitive and selective detection of sequence-specific DNA. The presence of target DNA mediates the formation of a sandwiched complex between the DNA-wrapped CNT and a hairpin DNA capture probe immobilized on magnetic beads. This allows target-selective collection of the CNT labels by magnetic separation and transfer on the electrode surface modified with an insulating self-assembled monolayer (SAM). After treatment with N,N-dimethylformamide, the collected sandwiched complex releases the bare CNTs and facilitates the removal of magnetic beads from the electrode surface. The bare CNTs can then assemble on the SAM-modified electrode surface and mediate efficient electron transfer between the electrode and the electroactive species in the solution with a strong current signal generated. The results indicate that the developed strategy shows a sensitive response to target DNA with a desirable signal gain and a low detection limit of 0.9 pM. This strategy is also demonstrated to provide excellent differentiation of single-base mismatch in target DNA. It is expected that this electrochemical strategy may hold great potential as a novel platform for clinical diagnostics and genetic analysis.

Cofactor-Assisted Artificial Enzyme with Multiple Li-Bond Networks for Sustainable Polysulfide Conversion in Lithium-Sulfur Batteries.

Lithium-sulfur batteries possess high theoretical energy density but suffer from rapid capacity fade due to the shuttling and sluggish conversion of polysulfides. Aiming at these problems, a biomimetic design of cofactor-assisted artificial enzyme catalyst, melamine (MM) crosslinked hemin on carboxylated carbon nanotubes (CNTs) (i.e., [CNTs-MM-hemin]), is presented to efficiently convert polysulfides. The MM cofactors bind with the hemin artificial enzymes and CNT conductive substrates through FeN5 coordination and/or covalent amide bonds to provide high and durable catalytic activity for polysulfide conversions, while π-π conjugations between hemin and CNTs and multiple Li-bond networks offered by MM endow the cathode with good electronic/Li+ transmission ability. This synergistic mechanism enables rapid sulfur reaction kinetics, alleviated polysulfide shuttling, and an ultralow (<1.3%) loss of hemin active sites in electrolyte, which is ≈60 times lower than those of noncovalent crosslinked samples. As a result, the Li-S battery using [CNTs-MM-hemin] cathode retains a capacity of 571 mAh g-1 after 900 cycles at 1C with an ultralow capacity decay rate of 0.046% per cycle. Even under raising sulfur loadings up to 7.5 mg cm-2 , the cathode still can steadily run 110 cycles with a capacity retention of 83%.

Pd/PdO Electrocatalysts Boost Their Intrinsic Nitrogen Reduction Reaction Activity and Selectivity via Controllably Modulating the Oxygen Level.

The electrocatalytic nitrogen reduction reaction (eNRR) is regarded as promising sustainable ammonia (NH3) production alternative to the industrial Haber-Bosch process. However, the current electrocatalytic systems still exhibit a grand challenge to simultaneously boost their eNRR activity and selectivity under ambient conditions. Herein, we construct Pd/PdO electrocatalysts with a controlled oxygen level by a facile electrochemical deposition approach at different gas atmospheres. Theoretical calculation results indicate that the introduction of an oxygen atom into a pure Pd catalyst would modulate the electron density of the Pd/PdO heterojunction and thus influence the adsorption energy for nitrogen and hydrogen. The calculation results and experiments show that the Pd/PdO heterojunction with a moderate oxygen level (O-M) exhibits optimal eNRR performance with a high NH3 yield of 11.0 µg h-1 mgcat-1 and a large Faraday efficiency (FE) of 22.2% at 0.03 V (vs RHE) in a 0.1 M KOH electrolyte. The moderate affinity of Pd to N in the Pd/PdO heterojunction and the inhibition of the hydrogen evolution reaction (HER) can facilitate the breaking of the triple bond of N2 and promote the protonation of N, which is confirmed by ex situ X-ray photoelectron spectroscopy (XPS) and in situ Raman spectroscopy. In situ Fourier transform infrared spectroscopy (FTIR) and density functional theory (DFT) calculations further disclose that the O-M catalysts prefer the distal association pathway during the eNRR process. This work opens a new way to construct heterostructures by controlling the oxygen level in other electrochemical fields.

Sulfur Reduction Catalyst Design Inspired by Elemental Periodic Expansion Concept for Lithium-Sulfur Batteries.

The key challenges facing the commercialization of lithium-sulfur (Li-S) batteries are shortening the lithium polysulfide (LiPS) intermediate existence time while accelerating solid-phase conversion reactions. Herein, inspired by highly efficient natural enzymes with Fe/N active sites for oxygen reduction reactions, we report a periodic expansion catalysis concept, i.e., Ru and P synergic stereoselectivity, for designing sulfur reduction reaction (SRR) catalysts. As a proof of concept, a RuP2-configuration molecular catalyst was exploited to assemble an interlayer in Li-S batteries that adsorbs LiPSs, optimizes Li+ migration paths, and catalyzes SRRs. Comprehensive investigation identified the elimination of steric hindrance and strong electron orbital couplings between metallic d band and nonmetallic p band as the main contributing factors of PEC for the SRRs. As a result, the Li-S battery with ∼0.5 wt % catalyst additive showed enhanced cycling stability even under a high sulfur loading (6.5 mg cm-2) and low electrolyte/sulfur ratio (9 µL mg-1).

Desolvation Synergy of Multiple H/Li-Bonds on an Iron-Dextran-Based Catalyst Stimulates Lithium-Sulfur Cascade Catalysis.

Traditional lithium-sulfur battery catalysts are still facing substantial challenges in solving sulfur redox reactions, which involve multistep electron transfer and multiphase transformations. Here, inspired by the combination of iron dextran (INFeD) and ascorbic acid (VC) as a blood tonic for the treatment of anemia, a highly efficient VC@INFeD catalyst is developed in the sulfur cathode, accomplishing the desolvation and enrichment of high-concentration solvated lithium polysulfides at the cathode/electrolyte interface with the assistance of multiple H/Li-bonds and resolving subsequent sulfur transformations through gradient catalysis sites where the INFeD promotes long-chain lithium polysulfide conversions and VC accelerates short-chain lithium polysulfide conversions. Comprehensive characterizations reveal that the VC@INFeD can substantially reduce the energy barrier of each sulfur redox step, inhibit shuttle effects, and endow the lithium-sulfur battery with high sulfur utilization and superior cycling stability even under a high sulfur loading (5.2 mg cm-2 ) and lean electrolyte (electrolyte/sulfur ratio, ≈7 µL mg-1 ) condition.

IrO2-Stablized La2IrO6 perovskite nanotubes via corner-shared interconnections as highly-efficient oxygen evolution electrocatalysts.

One-dimensional nanotube heterostructures with IrO2-stabilized La2IrO6 is obtained by an electrospinning approach. The La2IrO6/IrO2 catalyst exhibits superior catalytic activity and strong stability for the oxygen evolution reaction. The synergistic cooperation between the two types of Ir as the active sites in La2IrO6/IrO2 is demonstrated by in situ Raman spectrum and DFT calculation.

Progress and Prospect of Organic Electrocatalysts in Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries featured by ultra-high energy density and cost-efficiency are considered the most promising candidate for the next-generation energy storage system. However, their pragmatic applications confront several non-negligible drawbacks that mainly originate from the reaction and transformation of sulfur intermediates. Grasping and catalyzing these sulfur species motivated the research topics in this field. In this regard, carbon dopants with metal/metal-free atoms together with transition-metal complex, as traditional lithium polysulfide (LiPS) propellers, exhibited significant electrochemical performance promotions. Nevertheless, only the surface atoms of these host-accelerators can possibly be used as active sites. In sharp contrast, organic materials with a tunable structure and composition can be dispersed as individual molecules on the surface of substrates that may be more efficient electrocatalysts. The well-defined molecular structures also contribute to elucidate the involved surface-binding mechanisms. Inspired by these perceptions, organic electrocatalysts have achieved a great progress in recent decades. This review focuses on the organic electrocatalysts used in each part of Li-S batteries and discusses the structure-activity relationship between the introduced organic molecules and LiPSs. Ultimately, the future developments and prospects of organic electrocatalysts in Li-S batteries are also discussed.

NaBH4-reduction induced tunable oxygen vacancies in LaNiO2.7 to enhance the oxygen evolution reaction.

Tunable oxygen vacancies of LaNiO3 (LNO-Vo) are realized by theoretical prediction and the NaBH4-reduction approach. The LNO2.7 catalyst exhibits superior catalytic activity and long-term stability for water oxidation. Direct evidence of the active site center and the intermediates is observed from in situ Raman spectra and DFT calculations.

Oxygen doping in antimony sulfide nanosheets to facilitate catalytic conversion of polysulfides for lithium-sulfur batteries.

A high-performance catalyst, O-doped Sb2S3 nanosheets (SS-O NSs), is synthesized and introduced into lithium-sulfur batteries. Owing to their good conductivity, strong adsorbability/catalytic effect to polysulfides and fast Li+ diffusion, the SS-O NSs-modified cathodes can effectively mitigate the shuttle effect, thus achieving outstanding electrochemical performance.