A Prospective Assessment of Knee Arthroscopy Skills Between Medical Students and Residents-Simulator Exercises for Partial Meniscectomy and Analysis of Learning Curves.

BACKGROUND: The Covid-19 pandemic has created the largest disruption of education in history. In a response to this, we aimed to evaluate the knee arthroscopy learning curve among medical students and orthopaedic residents. METHODS: An arthroscopy simulator was used to compare the learning curves of two groups. Medical students with any prior knowledge of arthroscopy (n=24) were compared to a residents group (n=16). Analyzed parameters were "time to complete a task," assessment of the movement of tools and values scoring damage to the surrounding tissues. RESULTS: After several repetitions, both groups improved their skills in terms of time and movement. Residents were on average faster, had less camera movement, and touched the cartilage tissue less often than did students. Students showed a steeper improvement curve than residents for certain parameters, as they started from a different experience level. CONCLUSION: The participants were able to reduce the time to complete a task. There was also a decrease in possible damage to the virtual surrounding tissues. In general, the residents had better mean values, but the students had the steeper learning curve. Particularly less experienced surgeons can especially train their hand-eye coordination skills required for arthroscopy surgery. Training simulators are an important training tool that supplements cadaveric training and participation in arthroscopic operations and should be included in training.

Aerosol morphology and particle size distribution in orthopaedic bone machining: a laboratory worst-case contamination simulation. Is high-speed bone machining potentially harmful by pollution and quality schemes and what measures could be taken for prevention?

AIM OF THE STUDY: High-speed bone machining devices with irrigation fluid were used in surgery to spread aerosols and toss tissue particles of varying morphology into the operating room. Based on measurements taken on a phantom object, the shape, size, and spatial contamination distribution of such particles were assessed. METHOD: Cadaveric femoral heads were continuously machined with a spherical bur, manually held at a fixed attack angle. The irrigation fluid used during bone machining was enriched with bacteria to act as a tracer to quantify the spatial contamination. A vertical board equipped with snippets served as a phantom object to assess contamination load and morphology of airborne particles. RESULTS: Eight-nine percent of the particles had a non-circular cross section. The detected particle size ranged across six orders of magnitude, from 0.006 to 4 mm2 with a median particle size of 0.125 mm2. The CFU counts observed after the standard machining time ranged from 7 to 240, with a median of 2 CFUs. The highest median contamination was seen at the upper right corner of the phantom. DISCUSSION: The experiments show that contaminating particles of a wide variety of shapes and sizes are part of the aerosol created by high-speed burring. While protection of personnel and equipment is always important, surgical helmets should be worn, especially at contamination hotspots, and gloves should be replaced at the end of machining. Sensitive instruments and measuring devices-such as optical sensors-should also be protected effectively, as the optical measurement may be obstructed by aerosol particles.

The effect of gastrocnemius resection on knee flexion in a total knee arthroplasty model.

INTRODUCTION: Flexion contracture in knee arthritis and total knee arthroplasty (TKA) is a common and significant problem. An improvement in knee extension in patients with TKA and mild flexion contractures has been observed clinically when a gastrocnemius recession was performed for other concomitant conditions. The goal of this study was to quantify the effect of gastrocnemius recession on knee flexion in TKA cadaver model. MATERIALS AND METHODS: Range of motion (ROM) of 23 cadaveric knees was determined with a navigation system before and after performing TKA using a medial parapetallar approach and after performing a gastrocnemius recession. Varus-valgus, flexion-extension, and internal-external rotation angles of the knee joint were recorded with leg in full extension and in 90°of knee flexion. Extension and flexion gaps were measured using a gap tensioning device. Dorsiflexion of the foot was measured with a goniometer when a torque moment of 10 Nm was applied to the ankle joint. RESULTS: A statistically significant improvement of 5° in knee extension was observed following gastrocnemius recession (P = 0.015). Varus and valgus angles, internal, and external rotation were unaffected by gastrocnemius recession. Ankle dorsiflexion increased by 9° following gastrocnemius recession (P ≤ 0.001). CONCLUSIONS: Performing a gastrocnemius recession improves the knee extension in TKA knees with flexion contractures. Gastrocnemius recession may be a useful technique to improve terminal extension in TKA.

Subsidence of a metaphyseal-anchored press-fit stem after 4-year follow-up: an EBRA-FCA analysis.

PURPOSE: Uncemented stem migration analysis by EBRA-FCA (Einzel-Bild-Roentgen Analyse, Femoral Component Analyse) has been seen to be a good predictive indicator for early implant failure. In this study, we investigated the migration behavior of a cementless metaphyseal-anchored press-fit stem after 4-year follow-up. METHODS: Applying a retrospective study design, we reviewed all consecutive patients who between 2012 and 2017 received a cementless Accolade II press-fit stem at our Department. We reviewed medical histories and performed radiological measurements using EBRA-FCA software. EBRA-FCA measurements and statistical investigations were performed by two independent investigators. RESULTS: A total of 102 stems in 91 patients (female 60; male 31) fulfilled our inclusion criteria. Mean age at surgery was 66.2 (range 24.3-92.6) years. EBRA migration analysis showed a mean subsidence of 1.4 mm (range 0.0-12.0) at final follow-up. The angle between stem and femur axis was 0.5° (range 0.0°-2.8°) after 48 months. No correlations between gender or Dorr types and subsidence were found (p > 0.05). A body mass index > 30 kg/m2 showed a significant increase in stem subsidence within the first 6 (p = 0.0258) and 12 months (p = 0.0466) postoperative. CONCLUSIONS: Migration pattern of the metaphyseal-anchored stem and a low subsidence rate at final follow-up may predict a good long-term clinical result. TRIAL REGISTRATION: Number: 20181024-1875.

Outcome and EBRA migration analysis of a reconstruction cage in acetabular revision arthroplasty: a clinical and radiological study.

PURPOSE: Restoration cages and bone allografts have been proposed to manage severe acetabular bone defects. We aimed to investigate the migration behaviour of a restoration cup and impacted allograft bone in severe acetabular defects with Einzel-Bild-Röntgen-Analyse (EBRA). METHODS: Applying a retrospective study design, 64 cases treated between 2009 and 2016 were reviewed. We determined the preoperative Charlson Comorbidity Index (CCI), pre- to postoperative WOMAC score, blood loss and functional outcome. From preoperative x rays, the acetabular deficiencies were classified according to Paprosky. Cup migration analyses were performed with EBRA. RESULTS: Mean age at surgery was 73 (range: 38-93) years. According to the classification by Paprosky et al., 50% (n = 32) of our patients showed a type III B and 28.1% (n = 18) a type III A defect. Radiological follow-up for migration analysis was 35 (range: 4-95) months. Migration analysis showed a mean cup migration of 0.7 mm (range: 5.7-9.6) medial and 1.8 mm (range: 1.7-12.6) cranial. CONCLUSION: In conclusion, acetabular restoration cages in combination with bone impaction grafting showed a low revision rate at a mean follow-up of 35 months. Mean cup migration revealed low rates after 2 years and suggested a stable postoperative implant position.

Mid-term Follow-up of the Direct Anterior Approach in Acetabular Revision Hip Arthroplasty Using a Reconstruction Cage With Impaction Grafting.

BACKGROUND: Severe acetabular bone loss is often treated with reconstruction cages and impaction grafting using allograft bone. Accurate implant positioning is crucial for successful clinical and radiological outcomes. The direct anterior approach (DAA) is a standard approach for primary total hip arthroplasty (THA) that is being used more frequently for revision THA. The aim of this study was to report midterm clinical and radiological outcomes of acetabular revision arthroplasty using the DAA to address large acetabular defects by using a reconstruction cage and impaction grafting. METHODS: Acetabular cup revisions were performed in 64 patients (64 hips) with severe acetabular bone loss. All patients received reconstruction cages with impaction grafting via the DAA. The stem was also revised in 22 patients. Complications, radiological, and functional outcomes were assessed. RESULTS: Six of the 64 patients were revised at a mean follow-up of 27.6 months (range, 11-84 months), two each for implant failure, infection, and recurrent dislocation. One hip showed the radiological failure of the implant, but the patient was asymptomatic and was not revised. The median Western Ontario McMasters Osteoarthritis Score (WOMAC) for the cohort overall improved significantly (P < .01) by the latest follow-up compared with preoperative scores. CONCLUSION: Good midterm outcomes can be obtained with the DAA for acetabular cup revisions done to address severe acetabular bone loss by using reconstruction cages and impaction grafting. The number of complications was within the expected range for this type of revision procedure at midterm follow-up, and dislocation rates were low.

The direct anterior approach: treating periprosthetic joint infection of the hip using two-stage revision arthroplasty.

BACKGROUND: Either one- or two-stage revision arthroplasties can be used for the treatment of chronic periprosthetic joint infection (PJI) after total hip arthroplasty (THA). We report our results following two-stage revision surgery performed through the direct anterior approach (DAA) interval using a custom-made articulating spacer. METHODS: Between 2009 and 2014, 49 patients (49 consecutive procedures) had surgery through either a DAA or extended DAA approach. Each patient received perioperative intravenous administration of antibiotics. A custom-made spacer was implanted after explanting cup and stem and following extensive debridement. Broad-spectrum antibiotics were administered during the immediate perioperative period and then adjusted according to the infecting organism. Complication rates and eradication rates were observed. WOMAC patient assessments were administered preoperatively and one-year postoperatively. RESULTS: Of the 49 study patients, five had a recurrence of the infection after the second-stage revision, five had a proximal periprosthetic fracture during the first stage procedure and one patient had a transient femoral nerve palsy that resolved fully within the first postoperative year. 30 different microorganisms were identified on intraoperative specimens. The average time between first and second stage procedure was 65.7 days (range 21-132 days). Eradication of infection was defined as healed wound without fistula, no drainage, no recurrence of the infection, no subsequent surgical intervention for persistent or perioperative infection after second stage revision and no long-term (> 6 months) antimicrobial suppression therapy. Eradication rate of infection in our study was 89.8%. Postoperative WOMAC scores improved significantly CONCLUSION: The preliminary clinical results for the custom-made spacer technique implanted through the DAA are promising. Therefore, we believe the DAA can be used safely as a standard operative approach for two-stage revision procedures.

Extension of the Direct Anterior Approach for the Treatment of Periprosthetic Femoral Fractures.

BACKGROUND: Periprosthetic femoral fractures (PFFs) after total hip arthroplasty are devastating complications often resulting in functional limitations and increased mortality. The use of the direct anterior approach (DAA) is becoming more popular, and the number of revisions done through this interval is increasing. The DAA interval can be expanded to treat PFFs. This retrospective case series assessed outcomes of PFF patients treated with the extension of the DAA interval. METHODS: The study contained 40 patients (40 hips). Mean patient age was 74.3 years (range, 55.1-92.2 years). Mean follow-up time was 50.4 months (range, 20-98.2 months). Fractures were classified as Vancouver B2 (n = 36) and B3 (n = 4). RESULTS: Median cut-to-close time was 152 minutes (interquartile range: 80-279). There were five complications (12.5%): 2 deaths, 1 transient femoral nerve palsy, 1 fissure distal to the stem, and 1 hematoma. CONCLUSION: Expansion of the DAA interval to treat PFF showed similar results compared with other surgical approaches in terms of mortality, complications, fracture healing, and dislocation rate. These results indicate that femoral revision for PFF in the DAA interval is a safe and reliable procedure compared with other surgical approaches for the treatment of Vancouver B2 and B3 periprosthetic fractures.

Platelet concentrate as an additive to bone allografts: a laboratory study using an uniaxial compression test.

Chemical cleaning procedures of allografts are destroying viable bone cells and denaturing osteoconductive and osteoinductive proteins present in the graft. The aim of the study was to investigate the mechanical differences of chemical cleaned allografts by adding blood, clotted blood; platelet concentrate and platelet gel using a uniaxial compression test. The allografts were chemically cleaned, dried and standardized according to their grain size distribution. Uniaxial compression test was carried out for the four groups before and after compacting the allografts. No statistically significant difference was found between native allografts, allografts mixed with blood, clotted blood, platelet concentrate and platelet concentrate gel regarding their yield limit after compaction. The authors recommend to chemical clean allografts for large defects, optimize their grain size distribution and add platelet concentrate or platelet rich plasma for enhancing as well primary stability as well bone ingrowth.

The distance of the gluteal nerve in relation to anatomical landmarks: an anatomic study.

INTRODUCTION: Gluteal insufficiency is of concern with lateral approaches to total hip arthroplasty. Damage to the branches of the superior gluteal nerve may cause degeneration of the innervated muscles. The direct anterior approach exploits the intermuscular and internerval interval between tensor fasciae latae laterally and sartorius and rectus femoris muscle medially. In this study, the distance of the superior gluteal nerve in relation to anatomical landmarks was determined. MATERIALS AND METHODS: Two experienced surgeons implanted trial components in 15 alcohol glycerol fixed cadavers with 30 hips. The trials were removed, and the main branch of the superior gluteal nerve and muscular branches of the nerve were exposed from lateral. RESULTS: No visual damage to the main nerve branches and the location of the nerve in relation to the greater trochanter were noted by an experienced surgeon. The superior gluteal nerve and its muscular branches crossed the muscular interval between the gluteus medius and tensor fasciae latae muscles at a mean distance of 39 mm from the tip of the greater trochanter. CONCLUSIONS: The direct anterior approach for total hip arthroplasty minimizes the risk of injuring the superior gluteal nerve, which may result in a gluteal insufficiency. Special care should be paid on avoiding overstretching the tensor fasciae latea muscle using minimum force on retractors during surgery and by taking care of the entrance point of the superior gluteal nerve to the tensor fasciae latae.

The Direct Anterior Approach for Hip Revision: Accessing the Entire Femoral Diaphysis Without Endangering the Nerve Supply.

BACKGROUND: The direct anterior approach (DAA) to the hip has been criticized as an approach that is limited to primary arthroplasty only. Our study objective was to demonstrate, in a cadaveric setting, that an alternate extension of the DAA can be used to reach the femur at the posterior border of the lateral vastus muscle without endangering the nerve supply. METHODS: The iliotibial tract is split anteriorly and pulled laterally, thereby opening the interval to the lateral-posterior aspect of the vastus muscle. The muscle fascia is incised at the posterior border to access the femoral diaphysis. The vastus mobilization is started distally and laterally to the greater trochanter, leaving a muscular bridge between the vastus and the medial gluteal muscle intact. If it is necessary to open the femoral cavity for implant retrieval, we perform an anterior wall osteotomy instead of an extended trochanteric osteotomy. RESULTS: It was possible to split the iliotibial band and pull it laterally, thereby exposing the entire vastus lateralis muscle. The junction of the vastus lateralis and vastus intermedius was not encountered in all cases, nor was the nerve supply with all nerve fibers in that interval. CONCLUSION: The alternate technique described here for accessing the femoral diaphysis allows for easy access to the lateral aspect of the vastus lateralis and the femoral diaphysis. Using this technique, it should also be possible to access the femur and perform all necessary reconstructive procedures on it without damaging the surrounding nerve structures.

Computer aided planning of orthopaedic surgeries: the definition of generic planning steps for bone removal procedures.

PURPOSE: An increasing number of orthopaedic surgeons are using computer aided planning tools for bone removal applications. The aim of the study was to consolidate a set of generic functions to be used for a 3D computer assisted planning or simulation. METHODS: A limited subset of 30 surgical procedures was analyzed and verified in 243 surgical procedures of a surgical atlas. Fourteen generic functions to be used in 3D computer assisted planning and simulations were extracted. RESULTS: Our results showed that the average procedure comprises 14 ± 10 (SD) steps with ten different generic planning steps and four generic bone removal steps. CONCLUSIONS: In conclusion, the study shows that with a limited number of 14 planning functions it is possible to perform 243 surgical procedures out of Campbell's Operative Orthopedics atlas. The results may be used as a basis for versatile generic intraoperative planning software.

The deep layer of the tractus iliotibialis and its relevance when using the direct anterior approach in total hip arthroplasty: a cadaver study.

INTRODUCTION: Surgical approaches through smaller incisions reveal less of the underlying anatomy, and therefore, detailed knowledge of the local anatomy and its variations is important in minimally invasive surgery. The aim of this study was to determine the location, extension, and histomorphology of the deep layer of the iliotibial band during minimally invasive hip surgery using the direct anterior approach (DAA). MATERIALS AND METHODS: The morphology of the iliotibial tract was determined in this cadaver study on 40 hips with reference to the anterior superior iliac spine and the tibia. The deep layer of the tractus iliotibialis was exposed up to the hip-joint capsule and length and width measurements taken. Sections of the profound iliotibial tract were removed from the hips and the thickness of the sections was determined microscopically after staining. RESULTS: The superficial tractus iliotibialis had a length of 50.1 (SD 3.8) cm, while tensor fasciae latae total length was 18 (SD 2) cm [unattached 15 (SD 2.5) cm]. Length and width of the deep layer of the tractus iliotibialis were 10.4 (SD 1.3) × 3.3 (SD 0.6) cm. The deep iliotibial band always extended from the distal part of the tensor fascia latae (TFL) muscle to the lateral part of the hip capsule (mean maximum thickness 584 µm). Tractus iliotibialis deep layer morphology did not correlate to other measurements taken (body length, thigh length, and TFL length). CONCLUSIONS: The length of the deep layer is dependent on the TFL, since the profound part of the iliotibial band reaches from the TFL to the hip-joint capsule. The deep layer covers the hip-joint capsule, rectus, and lateral vastus muscles in the DAA interval. To access the precapsular fat pad and the hip-joint capsule, the deep layer has to be split in all approaches that use the direct anterior interval.

The extent of environmental and body contamination through aerosols by hydro-surgical debridement in the lumbar spine.

INTRODUCTION: Surgical site infections occur in 1-6% of spinal surgeries. Effective treatment includes early diagnosis, parenteral antibiotics and early surgical debridement of the wound surface. MATERIALS AND METHODS: On a human cadaver, we executed a complete hydro-surgery debridement including a full surgical setup such as draping. The irrigation fluid was artificially contaminated with Staphylococcus aureus (ATCC 6538). Surveillance cultures were used to detect environmental and body contamination of the surgical team. RESULTS: For both test setups, environmental contamination was observed in an area of 6 × 8 m. Both test setups caused contamination of all personnel present during the procedure and of the whole operating theatre. However, the concentration of contamination for the surgical staff and the environment was lower when an additional disposable draping device was used. CONCLUSIONS: The study showed that during hydro-surgery debridement, contaminated aerosols spread over the whole surgical room and contaminate the theatre and all personnel.

Pseudomonas aeruginosa outcompetes other bacteria in the manifestation and maintenance of a biofilm in polyvinylchloride tubing as used in dental devices.

In a PVC tube as a model system for dental devices, Pseudomonas aeruginosa outcompetes Staphylococcus aureus and Klebsiella pneumoniae for the biofilm formation. P. aeruginosa has advantage over the other strains due to higher tolerance for low-nutrient situations or direct killing by the production of soluble factors like pyocyanin.

Lyophilized allogeneic bone tissue as an antibiotic carrier.

The rising number of primary joint replacements worldwide causes an increase of revision surgery of endoprostheses due bacterial infection. Revision surgery using non-cemented implants seems beneficial for the long-term outcome and the use of antibiotic-impregnated bone grafts might control the infection and give a good support for the implant. In this study we evaluated the release of antibiotics from fresh-frozen and lyophilized allogeneic bone grafts. Lyophilized bone chips and fresh frozen bone chips were mixed with gentamicin sulphate, gentamicin palmitate, vancomycin, calcium carbonate/calcium sulphate impregnated with gentamicin sulphate, and calcium carbonate/calcium sulphate bone substitute material impregnated with vancomycin. The efficacy of each preparation was measured by drug release tests and bacterial susceptibility using B. subtilis, S. aureus and methicillin-resistant Staphylococcus aureus. The release of gentamicin from lyophilized bone was similar to the release rate from fresh frozen bone during all the experimental time. That fact might be related to the similar porosity and microstructure of the bone chips. The release of gentamicin from lyophilized and fresh frozen bone was high in the first and second day, decreasing and keeping a low rate until the end of the second week. Depending on the surgical strategy either polymethylmethacrylate or allogeneic bone are able to deliver sufficient concentrations of gentamicin to achieve bacterial inhibition within two weeks after surgery. In case of uncemented revision of joint replacements allogeneic bone is able to deliver therapeutic doses of gentamicin and peak levels immediately after implantation during a fortnight. The use of lyophilized and fresh frozen bone allografts as antibiotic carriers is recommended for prophylaxis of bone infection.

Antibiotic-loaded calcium carbonate/calcium sulfate granules as co-adjuvant for bone grafting.

In this study HERAFILL(®) granules containing gentamicin was evaluated as a bone void filling material once mixed with allograft bone grafts. The efficacy of the bone grafts mixed with HERAFILL(®) was measured by drug release tests and bacterial susceptibility using Bacillus subtilis, Staphylococcus epidermidis and Staphylococcus aureus. The effect of storage at -80 °C on the delivery and efficacy of gentamicin from bone grafts mixed with HERAFILL(®) was also investigated. Higher elution of gentamicin was detected in all stored groups (1 and 6 months) in comparison with non-stored samples. The gentamicin elution released from all groups was efficient on reducing S. aureus and S. epidermidis CFU. The susceptibility tests using S. aureus showed less resistance of the strain after 1 month of the elution storage. That resistance was not observed after 6 months of storage. The capacity of bone grafts to act as gentamicin carriers has been confirmed in this study. The different granules sizes did not interfere in the delivery rate of the antibiotics or in the activity against the bacteria. Storage at -80 °C does not interfere on the antibiotic activity.

Cartilage degeneration and not age influences the health-related quality of life outcome after partial meniscectomy.

PURPOSE: The purpose of this study is to investigate whether inconsistently reported factors influence the health-related quality of life (HRQOL) outcome of partial meniscectomy. METHOD: Short Form 36 (SF-36) data on 216 patients were retrospectively analysed for the influence of the factors age, gender and degree of cartilage degeneration. Mixed linear models were applied for univariate and multivariate analyses. RESULTS: All SF-36 scales, including the psychosocial scales, showed a significant improvement from pre- to post-operative (p < 0.001). The factor 'degree of cartilage degeneration' was found to significantly influence post-surgical improvement of the SF-36 'physical component summary' score. Patients with mild cartilage degeneration benefited significantly more from surgery than did patients with advanced cartilage degeneration (p = 0.011). Older patients had significantly lower scores on each subscale, but showed no significant age-time interaction, that is, no association was seen between age and the degree of improvement. No effect was determined for the variable gender. CONCLUSIONS: The findings of the current study can be interpreted to show that arthroscopic partial meniscectomy significantly improves HRQOL, even in mental or psychosocial dimensions of HRQOL. Not age but the degree of cartilage degeneration influences the HRQOL gain that can be expected. The factor gender has no effect on HRQOL. The findings of our study influence our daily routine, in that we take the degree of cartilage degeneration and not age as predictive value for the success to be anticipated from the procedure. Concerning the preoperative consenting, it is important to mention that advanced cartilage degeneration is a predictor of a less favourable outcome. LEVEL OF EVIDENCE: IV.

Retracting Soft Tissue in Minimally Invasive Hip Arthroplasty Using a Robotic Arm: A Comparison Between a Semiactive Retractor Holder and Human Assistants in a Cadaver Study.

BACKGROUND: All surgical procedures in orthopedics involve the retraction of soft tissue. In this study, the performance of 3 assistants holding the medial retractor during minimally invasive hip arthroplasty was compared with a semiactive retractor holder in a cadaver setup. METHODS: A total of 40 measurements on 3 cadavers were carried out with each subject (3 human, 1 robot) measuring each cadaver 10 times. The retractor was equipped with a sensor array on both sides, to measure variations of the retracting pressures over a 2-minute interval. RESULTS: The semiactive retractor holder showed an almost constant performance compared with the test subjects. There was no significant reduction of the applied pressure and almost no variation during the 2-minute interval and across all measurements. CONCLUSIONS: The performance of the semiactive retractor holder was more stable than that of a human assistant, making it suitable for intraoperative usage.

Bactericidal activity of N-chlorotaurine against biofilm-forming bacteria grown on metal disks.

Many orthopedic surgeons consider surgical irrigation and debridement with prosthesis retention as a treatment option for postoperative infections. Usually, saline solution with no added antimicrobial agent is used for irrigation. We investigated the activity of N-chlorotaurine (NCT) against various biofilm-forming bacteria in vitro and thereby gained significant information on its usability as a soluble and well-tolerated active chlorine compound in orthopedic surgery. Biofilms of Staphylococcus aureus were grown on metal alloy disks and in polystyrene dishes for 48 h. Subsequently, they were incubated for 15 min to 7 h in buffered solutions containing therapeutically applicable concentrations of NCT (1%, 0.5%, and 0.1%; 5.5 to 55 mM) at 37°C. NCT inactivated the biofilm in a time- and dose-dependent manner. Scanning electron microscopy revealed disturbance of the biofilm architecture by rupture of the extracellular matrix. Assays with reduction of carboxanilide (XTT) showed inhibition of the metabolism of the bacteria in biofilms. Quantitative cultures confirmed killing of S. aureus, Staphylococcus epidermidis, and Pseudomonas aeruginosa biofilms on metal alloy disks by NCT. Clinical isolates were slightly more resistant than ATCC type strains, but counts of CFU were reduced at least 10-fold by 1% NCT within 15 min in all cases. NCT showed microbicidal activity against various bacterial strains in biofilms. Whether this can be transferred to the clinical situation should be the aim of future studies.