Three-dimensional Maxillofacial Morphology Measurements in Japanese Adults with Normal Occlusion.

Accurate orthodontic analysis and diagnosis based on anatomical landmarks is essential to the success of orthodontic treatment. Helical computed tomography (CT) has evolved markedly, and dentists can now quickly obtain 3-dimensional (3D) reconstruction data using this imaging modality. The planning of orthodontic treatment had traditionally been based on cephalometric analysis using 2D landmarks. This study aimed to collect 3D morphological data using CT images to establish new landmarks for analysis and diagnosis in orthodontic treatment. Twenty male and 20 female adult Japanese dry skulls with of normal occlusion were selected. The skulls were scanned using a multidetector helical CT system (SIEMENS, Volume Zoom Plus 4, Germany). Models were reconstructed using 3D measurement software (Simplant, Dentsply Sirona, Tokyo, Japan) and 45 landmarks determined. Three-dimensional measurement for a total of 30 items representing these landmarks was then performed. The results provided 3D standard values for maxillofacial morphology in adult Japanese individuals with normal occlusion. These measurement items should allow the disadvantages of 2D cephalometric analysis to be overcome.

Survey on Condition and Orthodontic Treatment of Maxillary Lateral Incisors in Patients with Cleft Lip and Palate.

The aim of this study was to investigate the condition of the maxillary lateral incisors and evaluate the methods used for cleft closure in patients with cleft lip and palate, including the treatment of the maxillary lateral incisors. A total of 214 patients (260 clefts) with alveolar clefts who had started Phase II treatment and entered the maintenance period at the Department of Orthodontics at Tokyo Dental College, Chiba Hospital, between 1975 and 2014 were included. Panoramic, intraoral, and occlusal radiographs, as well as intraoral photographs and medical records, were used to investigate cleft classification, the presence or absence and location of maxillary lateral incisors, and frequency and treatment method for peg lateral incisors in the cleft region. There were more unilateral cleft cases (78.5%) than bilateral cleft cases. The prevalence of congenital absence of the maxillary lateral incisors was similar between unilateral (53.0%) and bilateral cases (53.3%). Peg laterals occurred frequently, with 89.9% occurring in unilateral cases. The maxillary lateral incisors were more commonly found in the secondary than in the primary palate. The number of non-extraction cases was larger than that of extraction cases, regardless of cleft type or the location of the peg laterals. In many cases, the peg laterals were treated with non-extraction and space closure or crown modification. These results suggest that, depending on their condition, the peg laterals should be preserved as much as possible in devising a treatment plan.

Surgical Orthodontic Treatment Involving Mandibular Premolar Extraction in Patient with Mandibular Retrusion Associated with Temporomandibular Joint Osteoarthritis.

Here, we report retention following surgical orthodontic treatment in a patient with vertical maxillary excess associated with temporomandibular joint osteoarthritis (TMJOA) and marked mandibular retrusion. The patient was a man aged 20 years 10 months who presented with the chief complaint of maxillary protrusion. The facial profile was of the convex type due to marked mandibular retrusion. In addition, the patient had a gummy smile. Intraoral findings revealed a Class II molar relation, +11 mm overjet, and 0 mm overbite. Mandibular dentition arch length discrepancy showed crowding of -2 mm, and the maxillary dentition showed a spaced arch of +5 mm. Panoramic radiographs confirmed flattening of the condylar head and proliferation of the bone margin. Cephalometric analysis of the skeletal pattern revealed that, horizontally, the maxilla was anterior and the mandible posterior; vertically, a dolichofacial pattern was noted. The anterior maxillary tooth axis was standard, but the anterior mandibular tooth axis showed labial inclination. Based on these findings, skeletal maxillary protrusion associated with TMJOA was diagnosed. Surgical orthodontic treatment comprised bilateral mandibular first premolar extraction with two-jaw surgery and genioplasty. Orthodontic treatment was performed with a multibracket system using a 0.22-slot pre-adjusted edgewise appliance. At 2 years and 11 months after initiation of treatment, the maxilla was transposed 6 mm upwards by orthognathic surgery and the mandible 17 mm anteriorly and 5 mm upwards by counterclockwise rotation. At 3 years and 10 months, the Pogonion was moved 6 mm anteriorly by genioplasty. At 4 years, orthodontic treatment was concluded on confirming satisfactory occlusion and improvement in facial features. At 2 years after completion of treatment, occlusion and the maxillofacial morphology remain stable, with almost no relapse. In addition, no temporomandibular joint disorder symptoms have occurred. Careful comprehensive follow-up observation will be continued.

Orthodontic Treatment for Bloch-Sulzberger Syndrome in Patient with Cleft Lip and Palate.

We performed orthodontic treatment, fitted prostheses, and provided restorative treatment in a patient with Bloch-Sulzberger syndrome and cleft lip and palate during the early mixed dentition period. We report the case after a subsequent 6-year retention phase including the period of pubertal growth. A girl aged 8 years 4 months visited our hospital with the chief complaint of crowding of the anterior teeth and anterior crossbite. She had bilateral cleft lip, alveolus, and palate; a Class II molar relationship; winging of both the maxillary bilateral central incisors; and spacing in the mandibular anterior teeth arches. Anterior crossbite comprised 0 mm overbite and -1 mm overjet. The crown diameter was at least one standard deviation smaller than normal in both the deciduous and permanent teeth, and the crowns were slightly peg-shaped. Panoramic radiograph confirmed congenital absence of 21 permanent teeth. Cephalometric analysis revealed poor growth of the maxilla, downward growth of the mandible, and lingual inclination of the maxillary central incisors. The diagnosis was skeletal anterior crossbite with cleft lip, alveolus, and palate, accompanied by hypodontia. Orthodontic treatment comprised an edgewise appliance and an expansion arch to improve crowding and anterior crossbite. The appliance was removed 2 years after treatment initiation, followed by crown restorations of the maxillary central incisors and mandibular deciduous anterior teeth. A metal retainer was then fitted to the maxillary dentition. She was subsequently placed in a 6-year retention phase including pubertal growth, during which occlusal stability and esthetics were maintained.

Bilateral Scissor Bite Treated by Rapid Mandibular Expansion Following Corticotomy.

Scissor bite is defined as buccal displacement of the maxillary posterior teeth, with or without contact between the lingual surface of the maxillary lingual cusp and the buccal surface of the buccal cusp of its mandibular antagonist. Here we report treatment of bilateral scissor bite in the posterior region using rapid expansion following corticot-omy. The patient was a boy aged 17 years and 11 months in whom skeletal maxillary prognathism with bilateral scissor bite was diagnosed. The distance between the tips of canines and the mesial buccal cusps of the first molars was increased by use of a bonded rapid expansion appliance following corticotomy. Appropriate occlusion and lateral pro-file were obtained and maintained after retention. In addition, no gingival recession, hyperesthesia, or root surface caries occurred. These results suggest that mandibular lateral expansion following corticotomy is effective in young adult patients with a narrow mandibular arch.

Multidisciplinary treatment of peripheral osteoma arising from mandibular condyle in patient presenting with facial asymmetry.

While osteomas often occur in the orofacial area, it is relatively rare for one to occur in the temporomandibular joint area. Here, we report a patient who underwent multidisciplinary treatment including high condylectomy for peripheral osteoma arising in the left mandibular condyle. The patient was a 46-year-old woman with the chief complaint of facial asymmetry. Cephalometric analysis revealed skeletal anterior crossbite due to anterior deviation of the mandible, with chin deviation of 10 mm to the right. A computed tomography scan revealed bone hyperplasia in the mesiodistal and inner areas of the left mandibular condyle, which exhibited outward anterior displacement. Bone scintigraphy showed a circular area of strong radioisotope accumulation with indistinct boundaries, consistent with the lesion in the left mandibular condyle. The above findings led to a diagnosis of skeletal mandibular prognathism with facial asymmetry due to peripheral osteoma originating in the left mandibular condyle. After orthodontic treatment and surgical resection of the tumor and mandibular condyle, preservation and prosthetic treatment were undertaken. A well-balanced facial appearance and good occlusion were achieved.

Characteristics of Mandibular Arch Forms in Patients with Skeletal Mandibular Prognathism.

Arch forms in orthodontics are considered to affect occlusal stability. This study's subjects were 47 patients (Class III S group) who visited the Chiba Dental Center of Tokyo Dental College and were surgical orthodontic cases, and 60 patients with Class I malocclusion were selected as the control group. A mandibular model of each subject was plotted with each tooth on a digitizer. The clinical bracket points of each tooth were plotted, and intercanine and intermolar measurements were taken. The least squares method was used to fit a quartic equation, and the arch form was drawn. The Class IIIS group was divided by Wits appraisal and facial pattern into a dolichofacial or brachyfacial pattern, and arch forms were compared. The results show that the Class IIIS group had a significantly smaller intermolar width, canine depth, and molar depth and a significantly larger canine W/D ratio. In those with a dolichofacial pattern, the anterior curve of the arch form tended to be flat and the posterior curve narrower. This is because, in skeletal mandibular prognathism, the mandibular anterior shows lingual tipping, and the molars show palatal tipping due to dental compensation, and it was inferred that this tendency was higher in high-angle cases.

Effect of the Correction of Bilateral Differences in Masseter Muscle Functional Pressure on the Mandible of Growing Rats.

The objective of this study is to clarify the effect of restoring the lowered masticatory muscle functional pressure and correcting bilateral differences in masticatory muscle functional pressure on jawbone growth during growth and development with a quantitative evaluation of the changes in the micro/nanostructural characteristics of entheses. Male Wistar rats aged 4 weeks were divided into an experimental group injected with a botulinum toxin serotype A (BoNT/A) formulation to reduce muscle function (BTX group) and a control group (CTRL group). They were euthanised after 6, 8, 10, 12, and 16 weeks after measuring the difference between the midline of the upper and lower incisors. The mandibles were harvested for histological examination, second harmonic generation imaging, and the quantitative evaluation of biological apatite (BAp) crystal alignment. The midline difference decreased with age in weeks. In rats from 6 weeks after BoNT/A administration to 12 weeks after administration, the collagen fibre bundle diameter was significantly smaller in the BTX group; the difference between the two groups decreased with increasing age. BAp crystal alignment was significantly different on the x-axis and the y-axis on the BTX group from 6 weeks after BoNT/A administration to 10 weeks after administration. Asymmetry of mandibular bone formation caused by load imbalance during growth could be corrected by the adjustment of the function of the masseter muscle on either side.

Comparison of arch forms between Egyptian and North American white populations.

INTRODUCTION: The aim of this study was to evaluate the morphologic differences in the mandibular arches of Egyptian and North American white subjects. METHODS: The sample included 94 Egyptian subjects (35 Class I, 32 Class II, and 27 Class III) and 92 white subjects (37 Class I, 29 Class II, and 26 Class III). The subjects were grouped according to arch form types (tapered, ovoid, and square) to compare their frequency distribution between ethnic groups in each Angle classification. The most facial portions of 13 proximal contact areas were digitized on scanned images of mandibular casts to estimate the corresponding clinical bracket point for each tooth. Four linear and 2 proportional measurements were taken. RESULTS: In comparing arch dimensions, intermolar width was narrower in Egyptians than in the whites (P = 0.001). There was an even frequency distribution of the 3 arch forms in the Egyptian group. On the other hand, the most frequent arch form was ovoid followed by tapered and square in the white group; the square arch form was significantly less frequent than the tapered and ovoid arch forms (P = 0.029). CONCLUSIONS: The arch forms of Egyptians are narrower than those of whites. The distribution of the arch form types in Egyptians showed similar frequency, but the square arch form was less frequent in whites. It is recommended to select narrower archwires from the available variations to suit many Egyptian patients.

Comparison of arch forms between Israeli and North American white populations.

INTRODUCTION: Identification of the dental arch form of the orthodontic patient is a key aspect for achieving a stable, functional, and esthetic dentition. Failure to customize preformed archwires with the patient's arch form might increase the probability of relapse and lead to an unnatural smile. The primary objective of this study was to identify the arch forms of Israeli subjects with dental normocclusion and malocclusions. The secondary objective was to clarify the morphologic differences between Israeli and North American white subjects with various malocclusions. METHODS: The sample included 134 Israeli (40 Class I, 61 Class II, and 33 Class III) and 160 North American (60 Class I, 50 Class II, and 50 Class III) subjects. The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth based on mandibular tooth thickness data. Four linear and 2 proportional measurements were made. The dental arches were classified as square, ovoid, and tapered forms to determine and compare the frequency distributions between the 2 ethnic groups. RESULTS: The most frequent mandibular arch form of the Israeli group was found to be ovoid as opposed to tapered in the North American white group. The white population had statistically significant decreased arch widths and increased arch depths compared with the Israeli population. The analysis of the Israeli sample indicated that, as the malocclusion shifts from Class III through Class I to Class II, the weight of the arch form tends to shift from square and ovoid to ovoid and tapered. CONCLUSIONS: Our results suggest that, when treating Israeli patients, one should expect to use the preformed ovoid arch form orthodontic wires in a significant percentage of patients.

A case report of bilateral Brodie bite in early mixed dentition using bonded constriction quad-helix appliance.

Brodie bite is a comparatively rare type of malocclusion found in primary and mixed dentition. It not only adversely affects chewing and muscle functions, but also impairs normal growth and development of the mandible. This report describes the therapeutic results of a patient with bilateral Brodie bite in early mixed dentition after using a bonded constriction quad-helix appliance. The patient, a boy aged 9 years and 2 months, first visited our hospital after occlusal abnormality in the molar region was detected at a local dental clinic. Case analysis resulted in a diagnosis of bilateral Brodie bite with slight mandibular retrognathism. Treatment objectives were to reduce the arch width of the maxillary dentition and expand the mandibular arch in order to establish and stabilize molar occlusion and to achieve a Class I molar relation and appropriate overbite and overjet. Treatment comprised covering the occlusal surface of the maxillary molars with resin and attaching a bonded constriction quad-helix appliance joined with a 0.040-inch quad-helix wire. A bi-helix appliance was also fixed to the mandibular dentition. Brodie bite visibly improved after 5 months. Cervical headgear was then fitted and the patient observed until eruption of the permanent dentition was complete. Class I molar relation was achieved after 2 years and 6 months, although spacing remained in the maxillary and mandibular dentitions. Treatment of bilateral Brodie bite in mixed dentition by means of a bonded constriction quad-helix appliance attached to the maxillary dentition enabled effective bite opening and reduction in the width of maxillary arch independent of the patient's cooperation, providing good therapeutic outcome in a short time period.

Survey of accidental ingestion and aspiration at Tokyo Dental College Chiba Hospital.

The occurrence of accidental ingestion/aspiration and preventive measures were investigated at Tokyo Dental College Chiba Hospital. In addition, the characteristics of accidents at our hospital were analyzed by surveying the awareness of accidental ingestion/aspiration to utilize the data for prevention. Accidental ingestion accounted for about 30% of accidents that occurred at our hospital in fiscal 2008, but all ingested items were naturally excreted, and no accidental aspiration occurred. Accidental ingestion most frequently occurred when dental restorations were removed. Inlays and crowns were most frequently ingested, and dentists with 5 to less than 10 years of clinical experience tended to be involved in these accidents. According to the results of the questionnaire, removal of restorations was perceived as the treatment least likely to cause accidental ingestion/aspiration. Moreover, dentists who always took preventive measures against accidental ingestion/aspiration accounted for only 40% or less on average. To avoid accidental ingestion/aspiration, repeated courses and individual instruction for repeaters and the establishment of a surveillance system along with manuals to manage the violation should be emphasized.

Morphological study on quadruplets by cephalometric and model analyses.

Clarifying the genetic factors involved in maxillofacial growth and development is very important in orthodontic treatment planning and prognosis. However, few dental studies have examined multiple births. The present orthodontic evaluation was conducted using orthodontic data from a set of quadruplets. Orthodontic evaluation was performed on a set of quadruplets (1 girl and 3 boys) aged 9 years and 7 months at the initial visit. Although all 4 children weighed only about 1,400 g each at birth, height and body weight subsequently normalized. Mean skeletal age of the quadruplets was 10 years and 2 months, about 6 months ahead of their calendar age. In all 4 children, facial profile was mostly symmetrical and convex. Intraoral findings showed a Hellman's dental age of IIIA, together with spacing of the upper anterior teeth. Both overbite and overjet were 5-7 mm, and mesial step of the terminal plane was noted. Model analysis showed that tooth materials were on the large side, while arch width was narrow. Cephalometric analysis revealed that the ANB of the first- and fourth-born children was 6 degrees , and skeletal maxillary protrusion due to mandibular retrusion was diagnosed. The second- and thirdborn children exhibited no marked skeletal abnormalities.

Tooth axis and skeletal structures in mandibular molar vertical sections in jaw deformity with facial asymmetry using MPR images.

The objective of the present study was to investigate frontal morphological asymmetry in the mandibular molar region in terms of tooth axis and skeletal structures using vertical MPR sections in jaw deformity accompanied by facial asymmetry. Subjects consisted of 15 patients with jaw deformity accompanied by facial asymmetry aged 17.4 years to 37.8 years. There were four men and eleven women. Based on X-ray computed tomography (CT) scans, DICOM viewer software was used to prepare multiplanar reconstruction (MPR) sections. The mandible was then positioned on a reference plane based on the menton and left and right gonions, and a vertical MPR section passing through the mesial root of the first mandibular molar was prepared. The following measurements were made on both the shifted and non-shifted sides: maximum buccolingual width of the mandibular body; height of the mandibular body; inclination angle of the mandibular body; degree of buccal protrusion of the mandibular body; and inclination angle of the buccolingual tooth axis of the first molar. Furthermore, degree of median deviation in the menton was measured using frontal cephalograms. Differences in morphological parameters between the shifted and non-shifted sides were assessed. Furthermore, the relationship between median deviation and asymmetry were statistically analyzed. There was no significant asymmetry in the maximum buccolingual width of the mandibular body, the height of the mandibular body or the degree of buccal protrusion of the mandibular body. However, when compared to the shifted side, the inclination angle of the buccolingual tooth axis of the first molar for the non-shifted side was significantly greater. There was a relatively strong correlation between median deviation and inclination angle of the mandibular body. The above findings clarified that, in orthognathic surgery for jaw deformity accompanied by facial asymmetry, actively improving asymmetry in the buccolingual inclination of the tooth axis of the molar region during presurgical orthodontic treatment is important in achieving favorable post-treatment occlusal stability and facial symmetry.

Multidisciplinary treatment of mandibular prognathism with multiple congenitally missing teeth.

Surgical orthodontic treatment and dental implant therapy were performed on a man (aged 18 years 8 months) with mandibular prognathism and seven congenitally missing teeth: upper canines, first and second premolars and lower right second premolar. After 17 months of preoperative orthodontic treatment at age 20 years 1 month, sagittal split ramus osteotomy was performed using the remaining upper deciduous teeth as an anchor for intermaxillary fixation. In postoperative orthodontic treatment, the remaining deciduous teeth were extracted, and fixture installation was performed. The entire therapy required 4 years to complete (age 22 years 8 months). After completion of orthodontic treatment, superstructures were put in place. This patient had many dental problems, so multidisciplinary care was performed in conjunction with other departments to improve oral function and facial esthetics.

A cineradiographic study of deglutitive tongue movement in patients with anterior open bite.

The purpose of this study was to use cineradiographic images to investigate tongue movement during deglutition in anterior open bite patients with tongue thrust. Each subject had semi-spherical lead markers attached to the tip and dorsal surface of the tongue and was asked to swallow 5 ml of diluted liquid barium. Tongue movement during deglutition was recorded in the mid-sagittal plane with an X-ray VTR system. The deglutition process was divided into 6 stages to analyze the movements of the tip and dorsal surface of the tongue in each stage. In open bite patients, both the tip and dorsum of the tongue were positioned anteriorly and inferiorly at rest and during the buildup of negative intraoral pressure. The dorsum of the tongue tended to move and be positioned anteriorly as the tongue tip protruded and pushed the maxillary and mandibular anterior teeth. The tongue tip traveled a significantly smaller distance from the stage of tongue rest position to that of most retruded tongue tip position and a significantly larger distance from the stage of most retruded tongue tip position to that of tongue tip fixation in open bite patients than in controls.

Evaluation of the implantation position of mini-screws for orthodontic treatment in the maxillary molar area by a micro CT.

The interalveolar septum between the upper first molar and the second premolar of the separated human maxillary bone was three-dimensionally observed by micro CT to evaluate the appropriate mini-screw type implant placement position by considering the relationship between the tooth roots and the maxillary sinus. After taking micro CTs of 5 human maxillary bones, horizontally sectioned images of the interalveolar septum area 2, 4, 6, 8, 10, and 12 mm deep from the crest of the alveolar ridge were reconstructed by three-dimensional reconstruction software. The bucco-lingual and mesio-distal lengths and area in each sectioned interalveolar septum were measured using digital image measurement software. Using the results, the interalveolar septum area between the upper first molar and the second premolar approximately 6-8 mm deep from the alveolar crest in the tooth root apical direction was determined to be the safest position for mini-screw implantation. Furthermore, lateral implantation from the palatal side was deduced to be the safest approach.

Morphological evaluations in skeletal Class III malocclusion requiring maxillofacial surgery using orthognathic surgical analysis.

The purpose of this study was to establish a Japanese standard norm for orthognathic surgical analysis to be used in clinical applications and to clarify maxillofacial morphological characteristics in skeletal Class III malocclusions requiring orthognathic surgery. The materials were pretreatment lateral cephalometric radiographs in the relaxed lip posture from 50 subjects with skeletal Class III malocclusions diagnosed as requiring orthognathic surgery. The control group consisted of 50 subjects with normal occlusion and well-balanced faces. Detailed cephalometric measurements were recorded and analyzed statistically. The skeletal, dental, and soft tissue measurements from the normal group did not reveal any marked differences between the sexes. The Class III group exhibited a more retrognathic maxilla and prognathic mandible, a steeper mandibular plane, a more prominent chin, and a larger lower facial height in the skeletal measurements; a significant lingual inclination of the mandibular incisor in the dental measurement; and a more concave profile with prognathic mandible, a larger lower facial height, a more acute nasolabial angle and chin in the soft tissue measurements. We suggest that this analysis can be clinically useful in diagnosis, treatment planning, and posttreatment evaluation for orthognathic surgical cases who are Class III patients.

Comparison of arch forms between Korean and North American white populations.

The purpose of this study was to evaluate morphologic differences in the mandibular arches of Korean and North American white subjects. The subjects were grouped according to arch form (tapered, ovoid, and square) to compare the frequency distribution of the 3 arch forms between the ethnic groups in each Angle classification. The sample included 160 white (60 Class I, 50 Class II, and 50 Class III) and 368 Korean (114 Class I, 119 Class II, and 135 Class III) subjects. The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth according to mandibular tooth thickness data, and then 4 linear and 2 proportional measurements were taken. Arch width was statistically significantly smaller in the white group than in the Korean group, but arch depth did not differ. In the Korean group, the most frequent arch form was square, whereas in the white group the tapered arch form predominated. When the subjects were regrouped by arch form, the Korean arches had a tendency to be larger and deeper than the white arches within each of the 3 arch form types.