RESUMO
A number of high-entropy alloys (HEAs) in the TiVZrNbHf system have been synthesized by arc melting and systematically evaluated for their hydrogen sorption characteristics. A total of 21 alloys with varying elemental compositions were investigated, and 17 of them form body-centered-cubic (bcc) solid solutions in the as-cast state. A total of 15 alloys form either face-centered-cubic (fcc) or body-centered-tetragonal (bct) hydrides after exposure to gaseous hydrogen with hydrogen per metal ratios (H/M) as high as 2.0. Linear trends are observed between the volumetric expansion per metal atom [(V/Z)fcc/bct - (V/Z)bcc/hcp]/(V/Z)bcc/hcp with the valence electron concentration and average Pauling electronegativity (χp) of the alloys. However, no correlation was observed between the atomic size mismatch, δ, and any investigated hydrogen sorption property such as the maximum storage capacity or onset temperature for hydrogen release.
RESUMO
The properties of the mixed system LiBH4-LiCl-P2S5 are studied with respect to all-solid-state batteries. The studied material undergoes an amorphization upon heating above 60 °C, accompanied with increased Li+ conductivity beneficial for battery electrolyte applications. The measured ionic conductivity is â¼10-3 S cm-1 at room temperature with an activation energy of 0.40(2) eV after amorphization. Structural analysis and characterization of the material suggest that BH4 groups and PS4 may belong to the same molecular structure, where Cl ions interplay to accommodate the structural unit. Thanks to its conductivity, ductility and electrochemical stability (up to 5 V, Au vs. Li+/Li), this new electrolyte is successfully tested in battery cells operated with a cathode material (layered TiS2, theo. capacity 239 mA h g-1) and Li anode resulting in 93% capacity retention (10 cycles) and notable cycling stability under the current density â¼12 mA g-1 (0.05C-rate) at 50 °C. Further advanced characterisation by means of operando synchrotron X-ray diffraction in transmission mode contributes explicitly to a better understanding of the (de)lithiation processes of solid-state battery electrodes operated at moderate temperatures.