First Report of Colletotrichum siamense Causing Anthracnose of Chili Pepper Fruit in Korea.

In October 2015, typical anthracnose symptoms were observed on approximately 15 to 20% of the chili fruits (cv. Manita) growing in Goesan County, Chungcheong Province, South Korea. Infection of fruits were characterized by the presence of circular, sunken lesions with concentric rings of orange conidial acervuli. Fresh samples were collected from the infected fruits and lesions from seven symptomatic fruits were cut into small pieces (5 mm2) and surface sterilized by soaking them in 1% sodium hypochlorite for 3 min, followed by rinsing thrice using sterilized water, and drying on sterilized filter paper. The tissue pieces were then placed on potato dextrose agar (PDA) and incubated at 25 ± 2°C with 12hrs photoperiod. After 2 to 3 days, single hyphal tips were transferred to fresh PDA and a total of seven isolates were selected from typical single hyphae. The upper surfaces of the colonies formed on PDA were white to gray in color with cottony mycelia, in which salmon-colored acervuli were clearly visible (Supplementary 1). Thirty conidia were examined; all were hyaline, smooth-walled, aseptate, straight, mainly cylindrical with round ends, 12 to 17 µm long, and 3 to 4.5 µm wide. Appressoria were oval to irregular inshape, dark brown in color, and range from 9.5 to 11.5 µm × 6.5 to 7.5 µm in sizes. Morphological characteristics of the seven isolates were identical and resembled those of C. siamense (Weir et al. 2012). To confirm the identification of the fungal isolates, DNA from seven isolates were extracted (Cenis et al. 1992) and the genes encoding glyceraldehyde-3-phosphate dehydrogenase (GAPDH), internal transcribed spacer (ITS) rDNA regions, and ß-Tublin-2 (TUB2) were partially amplified and sequenced. Sequences from all seven isolates were identical each other. Nucleotide sequences of ITS, GAPDH, and TUB2 from representative isolates CNU180002 and CNU180012 were deposited in GenBank under accession numbers MH085103, MH085105, and MH085107 for CNU180002 and MK033503, MK033504, and MK033505 for CNU180012, respectively. The sequences for all three genes exhibited 99 to 100% identity with C. siamense, GenBank accession nos. FJ972613 (ITS), FJ972575 (GAPDH), and FJ907438 (TUB2) for both isolates. A multi-locus phylogenetic tree with closely related reference sequences downloaded from the GenBank database demonstrated that these two isolates were aligned with C. siamense. Pathogenicity of isolates CNU180002 and CNU180012 was confirmed on healthy fruits (Manita) by using a pin-pricked wound/drop (1 mm depth) and non-wound/drop inoculation method (Oo et al. 2017) and control fruits were mock-inoculated with sterilized distilled water. Three fruits were inoculated for each isolate and pathogenicity test were repeated thrice. After inoculation, the fruits were placed on a sterilized paper tissue in moistened clean boxes with a relative humidity of approximately 90% and incubated for 7 days at 25°C in the dark. Disease symptoms were appeared 5 to 7 days after inoculation on wounded fruits whereas non-wounded fruits were observed after 10 days. The two isolates showed identical symptoms and control fruits remained symptomless. Both isolates were re-isolated from infected fruits and were identical to the original isolates in morphology characteristics as well as on molecular sequences of ITS, GAPDH and TUB2 genes. To our knowledge, this is the first report of anthracnose caused by C. siamense on chili pepper fruit in Korea.

A Recent Expansion of the RXLR Effector Gene Avrblb2 Is Maintained in Global Populations of Phytophthora infestans Indicating Different Contributions to Virulence.

The introgression of disease resistance (R) genes encoding immunoreceptors with broad-spectrum recognition into cultivated potato appears to be the most promising approach to achieve sustainable management of late blight caused by the oomycete pathogen Phytophthora infestans. Rpi-blb2 from Solanum bulbocastanum shows great potential for use in agriculture based on preliminary potato disease trials. Rpi-blb2 confers immunity by recognizing the P. infestans avirulence effector protein AVRblb2 after it is translocated inside the plant cell. This effector belongs to the RXLR class of effectors and is under strong positive selection. Structure-function analyses revealed a key polymorphic amino acid (position 69) in AVRblb2 effector that is critical for activation of Rpi-blb2. In this study, we reconstructed the evolutionary history of the Avrblb2 gene family and further characterized its genetic structure in worldwide populations. Our data indicate that Avrblb2 evolved as a single-copy gene in a putative ancestral species of P. infestans and has recently expanded in the Phytophthora spp. that infect solanaceous hosts. As a consequence, at least four variants of AVRblb2 arose in P. infestans. One of these variants, with a Phe residue at position 69, evades recognition by the cognate resistance gene. Surprisingly, all Avrblb2 variants are maintained in pathogen populations. This suggests a potential benefit for the pathogen in preserving duplicated versions of AVRblb2, possibly because the variants may have different contributions to pathogen fitness in a diversified solanaceous host environment.

Multiple recognition of RXLR effectors is associated with nonhost resistance of pepper against Phytophthora infestans.

Nonhost resistance (NHR) is a plant immune response to resist most pathogens. The molecular basis of NHR is poorly understood, but recognition of pathogen effectors by immune receptors, a response known as effector-triggered immunity, has been proposed as a component of NHR. We performed transient expression of 54 Phytophthora infestansRXLR effectors in pepper (Capsicum annuum) accessions. We used optimized heterologous expression methods and analyzed the inheritance of effector-induced cell death in an F2 population derived from a cross between two pepper accessions. Pepper showed a localized cell death response upon inoculation with P. infestans, suggesting that recognition of effectors may contribute to NHR in this system. Pepper accessions recognized as many as 36 effectors. Among the effectors, PexRD8 and Avrblb2 induced cell death in a broad range of pepper accessions. Segregation of effector-induced cell death in an F2 population derived from a cross between two pepper accessions fit 15:1, 9:7 or 3:1 ratios, depending on the effector. Our genetic data suggest that a single or two independent/complementary dominant genes are involved in the recognition of RXLR effectors. Multiple loci recognizing a series of effectors may underpin NHR of pepper to P. infestans and confer resistance durability.

A common plant cell-wall protein HyPRP1 has dual roles as a positive regulator of cell death and a negative regulator of basal defense against pathogens.

Although hybrid proline-rich proteins (HyPRPs) are ubiquitous in plants, little is known about their roles other than as cell-wall structural proteins. We identified the gene HyPRP1 in Capsicum annuum and Nicotiana benthamiana, which encodes a protein containing proline-rich domain and eight-cysteine motif (8CM) that is constitutively expressed in various organs, mostly in the root, but is down-regulated upon inoculation with either incompatible or compatible pathogens. Ectopic expression of HyPRP1 in plants accelerated cell death, showing developmental abnormality with down-regulation of ROS-scavenging genes, and enhanced pathogen susceptibility suppressing expression of defense-related genes. Conversely, silencing of HyPRP1 suppressed pathogen-induced cell death, but enhanced disease resistance, with up-regulation of defense-related genes and inhibition of in planta growth of bacterial pathogens independently of signal molecule-mediated pathways. Furthermore, the secreted 8CM was sufficient for these HyPRP1 functions. Together, our results suggest that a common plant cell-wall structural protein, HyPRP1, performs distinct dual roles in positive regulation of cell death and negative regulation of basal defense against pathogen.

Capsicum annuum homeobox 1 (CaHB1) is a nuclear factor that has roles in plant development, salt tolerance, and pathogen defense.

Homeodomain-leucine zipper (HD-Zip) family proteins are unique to plants, but little is known about their role in defense responses. CaHB1 is a nuclear factor in peppers, belonging to subfamily II of HD-Zip proteins. Here, we determined the role of CaHB1 in the defense response. CaHB1 expression was induced when pepper plants were challenged with Phytophthora capsici, a plant pathogen to which peppers are susceptible, or environmental stresses such as drought and salt stimuli. CaHB1 was also highly expressed in pepper leaves following application of SA, whereas ethephon and MeJA had a moderate effect. To further investigate the function of CaHB1 in plants, we performed gain-of-function study by overexpression of CaHB1 in tomato. CaHB1-transgenic tomatoes showed significant growth enhancement including increased leaf thickness and enlarged cell size (1.8-fold larger than control plants). Microscopic analysis revealed that leaves from CaHB1-transgenic plants had thicker cell walls and cuticle layers than those from controls. Moreover, CaHB1-transgenic plants displayed enhanced resistance against Phytophthora infestans and increased tolerance to salt stress. Additionally, RT-PCR analysis of CaHB1-transgenic tomatoes revealed constitutive up-regulation of multiple genes involved in plant defense and osmotic stress. Therefore, our findings suggest roles for CaHB1 in development, salt stress, and pathogen defense.

In planta expression screens of Phytophthora infestans RXLR effectors reveal diverse phenotypes, including activation of the Solanum bulbocastanum disease resistance protein Rpi-blb2.

The Irish potato famine pathogen Phytophthora infestans is predicted to secrete hundreds of effector proteins. To address the challenge of assigning biological functions to computationally predicted effector genes, we combined allele mining with high-throughput in planta expression. We developed a library of 62 infection-ready P. infestans RXLR effector clones, obtained using primer pairs corresponding to 32 genes and assigned activities to several of these genes. This approach revealed that 16 of the 62 examined effectors cause phenotypes when expressed inside plant cells. Besides the well-studied AVR3a effector, two additional effectors, PexRD8 and PexRD36(45-1), suppressed the hypersensitive cell death triggered by the elicitin INF1, another secreted protein of P. infestans. One effector, PexRD2, promoted cell death in Nicotiana benthamiana and other solanaceous plants. Finally, two families of effectors induced hypersensitive cell death specifically in the presence of the Solanum bulbocastanum late blight resistance genes Rpi-blb1 and Rpi-blb2, thereby exhibiting the activities expected for Avrblb1 and Avrblb2. The AVRblb2 family was then studied in more detail and found to be highly variable and under diversifying selection in P. infestans. Structure-function experiments indicated that a 34-amino acid region in the C-terminal half of AVRblb2 is sufficient for triggering Rpi-blb2 hypersensitivity and that a single positively selected AVRblb2 residue is critical for recognition by Rpi-blb2.

Extracellular self-RNA: A danger elicitor in pepper induces immunity against bacterial and viral pathogens in the field.

Plants and animals serve as hosts for microbes. To protect themselves from microbe-induced damage, plants and animals need to differentiate self-molecules/signals from non-self, microbe-derived molecules. Damage-associated molecular patterns (DAMPs) are danger signals released from the damaged host tissue or present on the surface of stressed cells. Although a self-extracellular DNA has previously been shown to act as a DAMP in different plant species, the existence of a self-extracellular RNA (eRNA) as a danger signal in plants remains unknown. Here, we firstly evaluated the ability of a pepper self-eRNA to activate immunity against viral and bacterial pathogens under field conditions. Pepper leaves pre-infiltrated with self-eRNA exhibited reduced titer of the naturally occurring Tomato spotted wilt virus and diminished symptoms of Xanthomonas axonopodis pv. vesicatoria infection through eliciting defense priming of abscisic acid signaling. At the end of the growing season at 90 days after transplanting, pepper plants treated with self- and non-self-eRNAs showed no difference in fruit yield. Taken together, our discovery demonstrated that self-eRNA can successfully activate plant systemic immunity without any growth penalty, indicating its potential as a novel disease management agent against a broad range of pathogenic microbes.

Elicitation of Innate Immunity by a Bacterial Volatile 2-Nonanone at Levels below Detection Limit in Tomato Rhizosphere.

Bacterial volatile compounds (BVCs) exert beneficial effects on plant protection both directly and indirectly. Although BVCs have been detected in vitro, their detection in situ remains challenging. The purpose of this study was to investigate the possibility of BVCs detection under in situ condition and estimate the potentials of in situ BVC to plants at below detection limit. We developed a method for detecting BVCs released by the soil bacteria Bacillus velezensis strain GB03 and Streptomyces griseus strain S4-7 in situ using solid-phase microextraction coupled with gas chromatography-mass spectrometry (SPME-GC-MS). Additionally, we evaluated the BVC detection limit in the rhizosphere and induction of systemic immune response in tomato plants grown in the greenhouse. Two signature BVCs, 2-nonanone and caryolan-1-ol, of GB03 and S4-7 respectively were successfully detected using the soil-vial system. However, these BVCs could not be detected in the rhizosphere pretreated with strains GB03 and S4-7. The detection limit of 2-nonanone in the tomato rhizosphere was 1 µM. Unexpectedly, drench application of 2-nonanone at 10 nM concentration, which is below its detection limit, protected tomato seedlings against Pseudomonas syringae pv. tomato. Our finding highlights that BVCs, including 2-nonanone, released by a soil bacterium are functional even when present at a concentration below the detection limit of SPME-GC-MS.

Analysis of the Effect of Carbonation Rate on the Concrete Water Reservoir Structures According to Applied Waterproofing/Anticorrosive Methods.

This study seeks to analyze how the degree of carbonation and the application of waterproofing and anticorrosive materials affect carbonation in water reservoirs among the water treatment facilities managed by the Seoul Metropolitan Government. To guarantee similarity of the experimental group, 42 highly similar water reservoirs were selected from among the water supply reservoirs currently in operation in Seoul. On-site carbonation assessments were performed in order to derive the carbonation rate coefficients. In the water reservoirs with applied waterproofing and anticorrosive materials immediately after public service, the upper and lower limits were D = 1.13t and D = 0.29t, respectively, whereas those of the water reservoir applied with waterproofing and anticorrosive materials after 15 years of service life were D = 1.89t and D = 0.94t, respectively. The comparative analysis showed that the rate of reduction in the carbonation rate was about 10.4% to 16.8% in the water reservoirs applied with waterproofing and anticorrosive methods after 15 years of service life. However, reduction in the carbonation rate was about 46.4% to 74.3% in the water reservoirs applied with waterproofing and anticorrosive methods at the initial stage of service life. It was confirmed that the early application of waterproofing and anticorrosive materials is effective in suppressing carbonation of concrete water reservoir structures.

Genome Sequence of Ralstonia pseudosolanacearum SL1931, a Causal Phytopathogen of Bacterial Wilt Disease in Capsicum annuum and Nicotiana benthamiana.

Here, we report the genome sequence of Ralstonia pseudosolanacearum (R. solanacearum phylotype I) strain SL1931 (KACC10711), isolated from pepper (Capsicum annuum L.) stems; R. solanacearum is the causal pathogen of bacterial wilt. Strain SL1931 had a different type III effector profile than that of the reference genome strain GMI1000.

Use of a secretion trap screen in pepper following Phytophthora capsici infection reveals novel functions of secreted plant proteins in modulating cell death.

In plants, the primary defense against pathogens is mostly inducible and associated with cell wall modification and defense-related gene expression, including many secreted proteins. To study the role of secreted proteins, a yeast-based signal-sequence trap screening was conducted with the RNA from Phytophthora capsici-inoculated root of Capsicum annuum 'Criollo de Morelos 334' (CM334). In total, 101 Capsicum annuum secretome (CaS) clones were isolated and identified, of which 92 were predicted to have a secretory signal sequence at their N-terminus. To identify differences in expressed CaS genes between resistant and susceptible cultivars of pepper, reverse Northern blots and real-time reverse-transcription polymerase chain reaction were performed with RNA samples isolated at different time points following P. capsici inoculation. In an attempt to assign biological functions to CaS genes, we performed in planta knock-down assays using the Tobacco rattle virus-based gene-silencing method. Silencing of eight CaS genes in pepper resulted in suppression of the cell death induced by the non-host bacterial pathogen (Pseudomonas syringae pv. tomato T1). Three CaS genes induced phenotypic abnormalities in silenced plants and one, CaS259 (PR4-l), caused both cell death suppression and perturbed phenotypes. These results provide evidence that the CaS genes may play important roles in pathogen defense as well as developmental processes.

CaMsrB2, pepper methionine sulfoxide reductase B2, is a novel defense regulator against oxidative stress and pathogen attack.

Reactive oxygen species (ROS) are inevitably generated in aerobic organisms as by-products of normal metabolism or as the result of defense and development. ROS readily oxidize methionine (Met) residues in proteins/peptides to form Met-R-sulfoxide or Met-S-sulfoxide, causing inactivation or malfunction of the proteins. A pepper (Capsicum annuum) methionine sulfoxide reductase B2 gene (CaMsrB2) was isolated, and its roles in plant defense were studied. CaMsrB2 was down-regulated upon inoculation with either incompatible or compatible pathogens. The down-regulation, however, was restored to the original expression levels only in a compatible interaction. Gain-of-function studies using tomato (Solanum lycopersicum) plants transformed with CaMsrB2 resulted in enhanced resistance to Phytophthora capsici and Phytophthora infestans. Inversely, loss-of-function studies of CaMsrB2 using virus-induced gene silencing in pepper plants (cv Early Calwonder-30R) resulted in accelerated cell death from an incompatible bacterial pathogen, Xanthomonas axonopodis pv vesicatoria (Xav) race 1, and enhanced susceptibility to a compatible bacterial pathogen, virulent X. axonopodis pv vesicatoria race 3. Measurement of ROS levels in CaMsrB2-silenced pepper plants revealed that suppression of CaMsrB2 increased the production of ROS, which in turn resulted in the acceleration of cell death via accumulation of ROS. In contrast, the CaMsrB2-transgenic tomato plants showed reduced production of hydrogen peroxide. Taken together, our results suggest that the plant MsrBs have novel functions in active defense against pathogens via the regulation of cell redox status.

Anti-Seismic Performance Evaluation of Waterproofing Materials for Underground Pile Wall Structures.

This study introduces and demonstrates the application of an experimental regime for anti-seismic performance evaluation of waterproofing materials used for concrete pile walls. Concrete pile walls are subject to high degrees of seismic load, and the resultant stress can affect the waterproofing integrity of the structure, but there is currently no existing methodology or standard for evaluating this property of waterproofing materials. To propose and conduct this evaluation, a new testing apparatus was designed and manufactured to test an installed waterproofing material's seismic resistance performance. Under three different inclined angle conditions (0°, 10°, 20°), each with three different rotation speed conditions (10, 20 and 30 rotations per minute), three types of waterproofing materials were subjected to 30 s of increasing seismic stress and tested for their waterproofing performance. Waterproofing performance was determined by whether the specimen installed with the respective type of material was able to prevent leakage path formation during the seismic stress, and the performance was summarized and compared based on the average results for four specimens of each material type and the duration before leakage occurrence. Results of the demonstration testing yielded significantly different results for the tested material types, prompting the need to further investigate different types of waterproofing materials, products, and techniques for a comprehensive understanding of waterproofing material response properties against seismic stress. The demonstration process shown in this research was intended to serve as a proposal for the development of these performance evaluation criteria, methodologies, and equipment for possible future application.

Crack-Bridging Property Evaluation of Synthetic Polymerized Rubber Gel (SPRG) through Yield Stress Parameter Identification.

Yield stress parameter derivation was conducted by stress-strain curve analysis on four types of grout injection leakage repair materials (GILRM); acrylic, epoxy, urethane and SPRG grouts. Comparative stress-strain curve analysis results showed that while the yield stress point was clearly distinguishable, the strain ratio of SPRG reached up to 664% (13 mm) before material cohesive failure. A secondary experimental result comprised of three different common component ratios of SPRG was conducted to derive and propose an averaged yield stress curve graph, and the results of the yield stress point (180% strain ratio) were set as the basis for repeated stress-strain curve analysis of SPRGs of up to 15 mm displacement conditions. Results showed that SPRG yield stress point remained constant despite repeated cohesive failure, and the modulus of toughness was calculated to be on average 53.1, 180.7, and 271.4 N/mm2, respectively, for the SPRG types. The experimental results of this study demonstrated that it is possible to determine the property limits of conventional GILRM (acrylic, epoxy and urethane grout injection materials) based on yield stress. The study concludes with a proposal on potential application of GILRM toughness by finite element analysis method whereby strain of the material can be derived by hydrostatic pressure. Comparative analysis showed that the toughness of SPRG materials tested in this study are all able to withstand hydrostatic pressure range common to underground structures (0.2 N/mm2). It is expected that the evaluation method and model proposed in this study will be beneficial in assessing other GILRM materials based on their toughness values.

Morpho-Anatomical Traits and Soluble Sugar Concentration Largely Explain the Responses of Three Deciduous Tree Species to Progressive Water Stress.

A better understanding of plant drought responses is essential to improve plant water use efficiency, productivity, and resilience to ever-changing climatic conditions. Here, we investigated the growth, morpho-anatomical, physiological, and biochemical responses of Quercus acutissima Carruth., Quercus serrata Murray, and Betula schmidtii Regel to progressive water-stress. Seedlings were subjected to well-watered (WW) and water-stressed (WS) conditions while regularly monitoring the soil volumetric water content, stem diameter (SD), height, biomass, stomatal conductance (gs), intercellular CO2 concentration (Ci), and leaf relative water content (RWC). We also investigated the variation in stomatal pore (SP) area, specific leaf area (SLA), root xylem vessel diameter (VD), and total soluble sugar (TSS) concentration between treatments. After 2 months, WS significantly suppressed SD growth of Q. acutissima and B. schmidtii but had no impact on Q. serrata. Total biomass significantly declined at WS-treated seedlings in all species. WS resulted in a smaller SLA than WW in all species. The SP of WS-treated seedlings of Q. acutissima and B. schmidtii significantly decreased, whereas it increased significantly with time in Q. serrata. Larger vessels (i.e., >100 to ≤ 130) were more frequent at WS for Q. acutissima and B. schmidtii, whereas smaller vessels (i.e., >40 to ≤ 90) were more frequent at WS than at WW for Q. serrata after 8 weeks. Tylosis was more frequent at WS than WW for Q. serrata and B. schmidtii at eighth week. WS seedlings showed lower gs, Ci, and RWC compared with WW-treated ones in Q. acutissima and B. schmidtii. TSS concentration was also higher at WS-treated seedlings in two Quercus species. Overall, principal component analysis (PCA) showed that SLA and SP are associated with WS seedlings of Q. serrata and B. schmidtii and the tylosis frequency, TSS, and VD are associated with WS seedlings of Q. acutissima. Therefore, water-stressed plants from all species responded positively to water stress with increasing experimental duration and stress intensity, and that is largely explained by morpho-anatomical traits and soluble sugar concentration. The present study should enhance our understanding of drought-induced tree growth and short-term tree-seedling responses to drought.

Evaluation Method of Relative Humidity Changes in Below-Grade Concrete Structure Space Depending on Different Waterproofing Material and Installation Method.

An evaluation method for assessing the difference in the relative humidity (RH) control performance of waterproofing material is proposed. For a demonstration of this evaluation method, two waterproofing materials (urethane coating and cementitious waterproofing material) installed with different methods (positive and negative side of concrete structure respectively) are exposed to temperature conditions representing three seasonal conditions: Summer (40 °C), spring/autumn (20 °C) and winter (4 °C). Condensation level changes on the inner side of the waterproofing material installed specimen is measured, and for derive criteria for comparison, three parameters based on the average RH, intercept RH (derived from a linear regression analysis of RH measurement), and maximum relative humidity are derived for each different waterproofing material installed specimen. Based on quality specification for underground concrete structures, the demonstration evaluation establishes provisional standard criteria of below 70% RH, and all three parameters are evaluated to determine whether the tested waterproofing material/method complies to the performance requirement. Additional analysis through linear regression and cumulative probability density graphs are derived to evaluate the RH consistency and range parameters. The evaluation regime demonstrates a quantitative RH analysis method and apparatus, and a newly designed evaluation criteria is used to compare the RH control performance of positive-side installed urethane waterproofing materials and negative-side installed cementitious waterproofing material.

Analysis on the Effects of External Temperature and Welding Speed on the Safety of EVA Waterproofing Sheet Joints by Hot Air Welding.

This study analyzes the optimal seasonal ambient temperature during welding and welding speed conditions for securing high tensile strength of ethylene vinyl acetate (EVA) waterproofing sheets bonded for roofing, installed by hot air welded joints (overlaps). Seven separate ambient temperature conditions (-10, -5, and 0 °C for winter conditions, 20 °C for the normal condition, and 25, 30, and 35 °C for summer conditions) were set for the test variable and seven speed conditions (3, 4, 5, 6, 7, 8, and 9 m/min) for hot air welding. Based on these conditions, EVA sheet joint specimens were prepared, and the tensile strength of the joint sections was tested and measured. Tensile strength results, compared to normal temperature conditions (20 °C) showed an increase in the summer temperature condition but a decrease during winter temperature conditions. The analysis on the effects of the welding speed showed that in summer temperature conditions (25, 30, and 35 °C), the optimum hot air welding speed is 4.3~9.0 m/min at 25 °C, 4.7~8.7 m/min at 30 °C and 5.2~8.6 m/min at 35 °C, whereas in winter (-10, -5, and 0 °C), the optimum hot air welding temperature is 3~4.1 m/min at -10 °C, 3~4.6 m/min at -5 °C and 3~4.9 m/min at 0 °C. Research results demonstrate that it is imperative to consider the welding speed in accordance to the respective seasonal temperature conditions to secure construction quality of the EVA joints for roofing.

Evaluation of Sheet-Coated Composite Waterproofing Joint Types by Analysis of Tensile Strength Change and Concrete Displacement Resistance Testing under Environmental Degradation.

Sheet-coated composite waterproofing (SCCW) have been developed to overcome the natural weakness of singly-ply coating or sheet waterproofing systems for roofing, but there are currently multiple types of SCCW joints. Conventional standard tensile strength testing results show that all SCCW joint types seem to pass the minimum requirement and current selection of SCCW type is dictated on the principle of 'higher tensile strength is better', but it has not been experimentally studied as to which type is the optimal to respond to environmental degradation while under the effect of zero-span tensile stress occurring during concrete joint displacement. In this study, five types of SCCW joints were tested: Overlap Bond (OB) type, Overlap Heated-Air Welding (OH) type, Butt Joint I Type (BI), Butt Joint T Type (BT), and Butt Joint Separation Movement Type (BS). These types of joint designs were subjected to Alkali, NaCl, and H2SO4 exposure, and temperature change (60 °C and -20 °C) for determining changes to tensile strength in the joint section. Tensile strength change results are compared to joint displacement resistance test results of specimens that were treated with chemical and temperature degradation. With the exception of chemical exposure conditioning, the Overlap type joints generally had higher tensile strength compared to the butt joint types, but joint displacement test results showed the opposite results, suggesting that complex joints found in SCCW require new evaluation method for quality assessment.

Oil Leakage Evaluation for Selection of Emulsion-Based Non-Curable Synthetic Polymer Rubberized Gel (ENC-SPRG) as Waterproofing Material in Underground Structures.

A revised oil leakage evaluation regime is proposed in response to the oil leakage problems of emulsion-based non-curable synthetic polymer rubberized gel (ENC-SPRG) used as a waterproofing material in concrete slabs of residential underground structures. Oil leakage from ENC-SPRG can cause significant economic and environmental damage. As ENC-SPRG waterproofing material is relatively new in the global waterproofing market, a systematic quality control for ENC-SPRG products being manufactured and exported globally is currently non-existent. For the selection of optimal ENC-SPRG, six assessment parameters comprised of averaged and daily average oil leakage mass, averaged and daily average filler content settlement, oil leakage area, and oil leakage duration are proposed. Five ENC-SPRG product specimens are tested to obtain the property values of each parameter. The property values derived from the test results are compared between the tested ENC-SPRG product specimens. With the demonstration of this evaluation regime, a quantified method for a comparative assessment of ENC-SPRG type waterproofing materials is established.