Development of a maxillomandibular arch form based on the center of resistance of teeth using cone-beam computed tomography.

INTRODUCTION: Controlling transverse discrepancies is necessary to ensure stable and functional occlusion. Altered molar inclinations can camouflage the transverse relationship. The purpose of this research was to evaluate the maxillomandibular relationship of the center of resistance (CR) of the arch form created by the CR of teeth and compare these CR arch forms by their skeletal patterns. METHODS: Sixty patients with minor crowding and normal posterior overjet were divided into 3 groups according to ANB angle: skeletal Class I group had ANB angle between 0° and 4° (n = 20), skeletal Class II group had ANB angle >4° (n = 20), and skeletal Class III group had ANB angle <0° (n = 20). The 3-dimensional coordinates of the CR were estimated using cone-beam computed tomography images and projected on the CR occlusal plane to obtain the 2-dimensional coordinates. The CR arch forms were constructed and evaluated using Matlab (MathWorks, Natick, Mass). RESULTS: On comparing maxillomandibular CR arch form widths, the maxilla was significantly larger than the mandible of the canine and first premolar. The mandible was larger in the first molar of the skeletal Class III group. The maxillomandibular CR arch form width ratios were between 0.97 and 1.35. On comparing maxillomandibular CR arch form areas, the maxilla was significantly larger than the mandible in the anterior segment, and the mandible was larger in the posterior segment. The ratios were between 0.86 and 2.25. In between-group comparison, the skeletal Class III group showed significantly greater arch forms in the mandible. CONCLUSIONS: CR arch forms had significant maxillomandibular differences throughout the arch. The maxillomandibular ratios could be a reference for site-specific transverse discrepancy analysis.

Evaluation of Periodontal Risk Factors with Quantitative Light-Induced Fluorescence Based Fluorescent Plaque Index, in Comparison to Radiographic and Oral Health Habit Scoring: A Retrospective Case Study.

The aim of this study was to evaluate periodontal risk factors with oral health habits and fluorescent plaque index (FPI) using quantitative light-induced fluorescence (QLF) images, and to evaluate their effect on the degree of radiographic bone loss (RBL). Selected were 276 patients over 19 years of age to complete the questionnaire for oral health habit and take QLF images, periapical and panoramic radiographs. Oral health habit score, age, and sex showed a statistically significant correlation with FPI. FPI showed a lower value as the oral health habit score increased and the age decreased. Moreover, females showed lower FPI values than did males. RBL showed a statistically significant positive correlation with age but did not show any correlation with oral health habit scores and sex. There was no correlation between FPI and RBL. The results of this study suggest that the clinical use of QLF allows plaque detection by non-invasive procedures and can aid in a more objective estimation for oral hygiene status.

Three-Dimensional Digital Superimposition of Orthodontic Bracket Position by Using a Computer-Aided Transfer Jig System: An Accuracy Analysis.

Accurate bracket placement is essential for successful orthodontic treatment. An indirect bracket bonding system (IDBS) has been developed to ensure proper bracket positioning with three-dimensional computer-aided transfer jigs. The purpose of this study was to investigate the accuracy of bracket positioning by a one-body transfer jig according to the tooth type and presence/absence of a resin base. In total, 506 teeth from 20 orthodontic patients were included in this study. After initial dental models were scanned, virtual setup and bracket positioning procedures were performed with 3D software. Transfer jigs and RP models were fabricated with a 3D printer, and brackets were bonded to the RP model with or without resin base fabrication. The best-fit method of 3D digital superimposition was used to evaluate the lineal and angular accuracy of the actual bracket position compared to a virtual bracket position. Although all the measurements showed significant differences in position, they were clinically acceptable. Regarding the tooth types, premolars and molars showed higher accuracy than anterior teeth. The presence or absence of a resin base did not consistently affect the accuracy. In conclusion, the proper application of IDBS should be performed considering the errors, and resin base fabrication might not be essential in ensuring high-accuracy IDBS.

Automatic Cephalometric Landmark Identification System Based on the Multi-Stage Convolutional Neural Networks with CBCT Combination Images.

This study was designed to develop and verify a fully automated cephalometry landmark identification system, based on multi-stage convolutional neural networks (CNNs) architecture, using a combination dataset. In this research, we trained and tested multi-stage CNNs with 430 lateral and 430 MIP lateral cephalograms synthesized by cone-beam computed tomography (CBCT) to make a combination dataset. Fifteen landmarks were manually and respectively identified by experienced examiner, at the preprocessing phase. The intra-examiner reliability was high (ICC = 0.99) in manual identification. The results of prediction of the system for average mean radial error (MRE) and standard deviation (SD) were 1.03 mm and 1.29 mm, respectively. In conclusion, different types of image data might be the one of factors that affect the prediction accuracy of a fully-automated landmark identification system, based on multi-stage CNNs.

Effect of Different Surface Designs on the Rotational Resistance and Stability of Orthodontic Miniscrews: A Three-Dimensional Finite Element Study.

High orthodontic forces and various directions of applied forces can be associated with loosening of the screw anchorage in the bone. Screw designs have been modified to increase the stability of the miniscrews. This research evaluates the influence of three-designs on the stability of orthodontic miniscrews. A conventionally cylinder-type miniscrew design (Bio-Action screw, Jin-Biomed co., Bucheon, Korea) was set as a control, and three conditions were studied based on modifications of this control design. Condition-1 has narrowed threads in the upper part of the screw; Condition-2 has a notch at the middle part; and Condition-3 has the combination of Condition-1 and Condition-2. The moment required to unwind the miniscrew to five degrees is tested, and the moment generated at the cortical bone and the trabecular bone were calculated with finite element analysis. Compared to the control, all three conditions showed a higher moment required to unwind the miniscrew and a higher moment generated at the cortical bone. At the trabecular bone, condition-2 and -3 showed higher moment than the control, and condition-1 showed similar moment to the control. Condition-3 required a higher overall moment to unwind the miniscrew. These findings validate the design modifications used to increase the rotational resistance.

Detection of Dental Caries and Cracks with Quantitative Light-Induced Fluorescence in Comparison to Radiographic and Visual Examination: A Retrospective Case Study.

The aim of this study was to present an optimal diagnostic protocol by comparing and analyzing a conventional examination and the quantitative light-induced fluorescence (QLF) technique. Selected were 297 teeth of 153 patients to take QLF images and bitewing radiographs. Occlusal dental caries, proximal dental caries and cracks were evaluated and scored using QLF, X-ray and/or visual criteria. The sensitivity, specificity, and area under the curve (AUC) of a receiver operating characteristic analysis were calculated. Two fluorescence parameters (|ΔFmax| and ΔRmax) were utilized to evaluate the fluorescence pattern according to the severity of lesions based on QLF or X-ray criteria. QLF showed higher scores for detecting occlusal dental caries and cracks than the conventional method. ΔRmax increased more clearly than ΔFmax did with occlusal dental caries. The |ΔFmax| values of occlusal dental caries, proximal dental caries and cracks showed good AUC levels (0.84, 0.81 and 0.83, respectively). The ΔRmax of occlusal dental caries showed the highest AUC (0.91) and the ΔRmax of proximal dental caries showed a fail level (0.59) compared to bitewing radiographs. The QLF image could visualize and estimate the degree of occlusal dental caries or cracks. Consequently, the QLF technique may be an adjunct tool to conventional methods for the detection of occlusal caries and peripheral cracks.

Computerized Assessment of Occlusion and Muscle Activity during Use of a Multilayer Clear Retainer: A Preliminary Study.

The aim of this preliminary study was to evaluate the short-term changes of occlusal contacts and muscle activity after orthodontic treatment during the use of a multi-layer clear retainer. Evaluation was done with the T-scan and BioEMG systems. A total of 18 subjects were included, who were evaluated at three time intervals-T0 at debonding, T1 at one month after retainer delivery, and T2 at four months after retainer delivery. The T-scan and electromyography (EMG) data were recorded simultaneously. The T-scan system recorded the occlusion time, disclusion time and force distribution. The EMG waves were quantified by calculating the asymmetry index and activity index. The time variables changed but not significantly. Occlusal force decreased in the anterior dentition and increased in the posterior dentition during T0-T2. There was no clear evidence of a relationship between unbalanced occlusal forces and muscle activity. In most subjects, the temporalis anterior muscle was more dominant than the masseter muscle. From this preliminary computerized study, there were no significant changes in the state of the occlusion or muscle activity during the short-term retention period.

Finite element analysis of C-expanders with different vertical vectors of anchor screws.

INTRODUCTION: C-expanders are tissue- and bone-borne maxillary expanders that are anchored by 6 orthodontic miniscrews, 3 on each side of the palate. The purpose of the study was to investigate the effect of C-expanders on the circummaxillary sutures and bucco-palatal axis of teeth in 3-dimensional finite element analyses when anchor screw vectors are different. METHODS: Five expansion models were studied on the basis of the vertical positions of anchor screws on the palate. Anchor screws for models A, B, and C were placed symmetrically at 4 mm, 7 mm, and 15 mm below the cementoenamel junction (CEJ), respectively. Anchor screws for models D and E were placed asymmetrically at 4 mm and 15 mm below CEJ and 7 mm and 15 mm below CEJ, respectively. Stress, displacement, and angular changes of the bone and teeth were measured in elastoplastic behavior models using a static-nonlinear simulation in an implicit method. RESULTS: Symmetrical and asymmetrical anchor screw placement with different vertical vectors were compared using finite element analyses on 5 models. CONCLUSIONS: Using different vectors of anchor screws for C-expanders does change the pattern of palatal expansion (null hypothesis was rejected). The current investigation presents a promising future of controlled asymmetric skeletal maxillary expansion when asymmetric maxillary architecture needs to be corrected for successful orthodontic outcomes without involving orthognathic surgeries.

Evaluation of interradicular space, soft tissue, and hard tissue of the posterior palatal alveolar process for orthodontic mini-implant, using cone-beam computed tomography.

INTRODUCTION: To investigate the anatomy of the posterior palatal alveolar process, which is often used for placement of the orthodontic mini-implant (OMI), and to suggest simple guidelines for safe placement of OMI. METHODS: Cone-beam computed tomography (CBCT) scans of 60 patients (30 men, 30 women; age range, 18-39 years; average age, 25.8 years) was used to measure the palatal interradicular distance, the palatal bone thickness, and the palatal soft-tissue thickness. Measurements were performed on the area from the maxillary canine to the maxillary second molar based on the vertical distance apical from the cementoenamel junction. The CBCT data were analyzed by Bonferroni correction for multiple testing and the multivariable mixed linear model. RESULTS: The palatal interradicular distance was the widest between the second premolar and the first molar and the narrowest between the first and second premolars. The palatal bone thickness at interdental sites was the thickest between the first and second premolars and the thinnest between the first and second molars. The interdental palatal soft-tissue thickness from the canine to the second premolar was thicker than any other area. There were minor measurement differences between genders and positive correlations between vertical distance from the cementoenamel junction plane and all of the parameters. CONCLUSION: In this study, we evaluated the anatomy of the posterior palatal area using CBCT scans of adult patients. The data will provide guidelines to the clinicians before OMI placement in the posterior palatal alveolar process.

Treatment of 2 impacted molars in a large dentigerous cyst (expansile cystic lesion) with combined orthodontic and surgical therapy.

Nonmineralized cysts and cyst-like lesions that frequently occur in the mandible include ameloblastomas, odontogenic keratocysts, and dentigerous cysts. They have specific features of well-demarcated, unilocular, and radiolucent lesions that are often associated with tooth impaction. Although it rarely occurs, these cysts can become extremely large. Furthermore, cyst enlargement causes additional symptoms that can challenge the success of tooth recovery through orthodontic treatment. This clinical report presents the successful eruption of 2 impacted molars in a large dentigerous cyst treated with marsupialization and orthodontic traction using an orthodontic miniplate anchorage over a 4-year treatment period.

Asymmetric nasomaxillary expansion induced by tooth-bone-borne expander producing differential craniofacial changes.

OBJECTIVES: To evaluate three-dimensional (3D) craniofacial changes induced by a non-surgical tooth-bone-borne rapid palatal expander (TBB-RPE) according to the symmetrical pattern of expansion, to investigate the 3D changes between the sides in patients with asymmetric expansion, and to identify the related factors of asymmetric expansion. SETTING AND SAMPLE POPULATION: Sixty-six patients (mean age: 19.3 ± 5.7 years) treated with TBB-RPE were divided into a symmetric expansion group (Group S, n = 46) or asymmetric expansion group (Group A, n = 20). Group S was subdivided into Group Ss (n = 27), with bilateral frontomaxillary suture (FMS) split, and Group Sn (n = 19), with no FMS split. MATERIALS AND METHODS: Pre- and post-expansion cone-beam computed tomography images were superimposed, and the common coordinated system was set. All landmarks were designated as coordinate pairs, and treatment changes were automatically calculated. Analysis of variance was conducted for intergroup comparison of craniofacial changes, and logistic regression analysis was performed to identify the related factors of asymmetric expansion. RESULTS: The frequency of asymmetric expansion was 30.3%. Group A with unilateral FMS split showed less craniofacial changes than Group Ss and more changes than Group Sn. Group A exhibited different nasomaxillary displacement between the two halves, showing greater changes in the FMS-split side. Among the tested six variables (age, gender, Angle's classification, unilateral crossbite, maxillary cant and chin deviation), chin deviation was uniquely associated with asymmetric expansion. CONCLUSIONS: Tooth-bone-borne rapid palatal expander had a risk of asymmetric expansion, especially in facial asymmetric patients with chin deviation, producing different craniofacial changes from symmetric expansion.

A New Designed Expander Supported by Spike Miniscrews With Enhanced Stability.

INTRODUCTION: This article represents a new design of expander-spike expander-to correct transverse maxillary deficiency. This new type appliance is easy to fabricate, more hygienic, and less soft-tissue irritation because of elimination of acrylic plate. In addition, because of the position of mini-implant, it can provide a relatively parallel alveolar expansion, compared with other types of expander. MATERIALS AND METHODS: The spike expander consists of 2 parts: 4 spike screws and an expansion screw. Four spike screws were placed on the palatal slope. After installation of the spike screws, based on the position of spike screw, the extension arms of expansion screw were bended on the cast model, and connected to the spike screws by adding resin. The expansion screw was turned once a day (0.25 mm/d), and the process was terminated at 6 weeks. RESULTS: The stability and design of the spike screw enable widening of maxilla easier. Compared with other expander, spike expander reduces the forces being placed directly on teeth, which can maximize skeletal expansion, minimize dental tipping, produce a relatively parallel expansion, and reduce soft-tissue irritation caused by acrylic pads. Furthermore, the teeth can be aligned and leveled simultaneously using the fixed appliance because teeth are free of contact by the expander. And the best point for spike expander is that it is simply fabricated and removed. CONCLUSIONS: The design of spike expander is combining spike screws and an expansion screw, which can provide a good and easy treatment method for transverse maxillary deficiency.

Evaluation of dental caries detection with quantitative light-induced fluorescence in comparison to different field of view devices.

This study evaluated dental caries detection ability between the Qraycam and Qraypen on the same dental caries lesions. A total of 178teeth from 61patients were imaged using Qraypen C®(QC) and Qraycam Pro®(QP) devices and evaluated using analysis software (QA2). Occlusal, secondary, and proximal dental caries were evaluated and scored according to International Caries Detection and Assessment System(ICDAS II) and X-ray criteria. Bland-Altman plots were used to compare quantitative light-induced fluorescence(QLF) parameters obtained from the different QLF devices. Sensitivity, specificity, and area under the receiver operating characteristic curve(AUROC) were calculated. The ΔFaver. of the QLF-parameters showed that the mean difference between the two different QLF devices was close to zero and that the ± 5 error value was included in the mean ± 1.96SD range for the detection of dental caries. The accuracies for diagnosing occlusal dental caries were 0.83-0.96 and 0.81-0.82 and the accuracies for diagnosing proximal dental caries were 0.52-0.62 and 0.52-0.71 for the QC and QP devices, respectively. In conclusion, the ΔFaver. obtained from the QP showed diagnostic value mainly for screening of demineralized teeth. For teeth selected through screening, the depth of the lesion must be precisely evaluated using additional QP and radiographic imaging.

Ultrasound-guided sialo-irrigation for the treatment of chronic sialodochitis with sialolithiasis.

Sialolithiasis is one of the most common causes of salivary duct obstruction. In the last 20 years, minimally invasive procedures like sialendoscopy, extracorporeal lithotripsy, and basket snaring are increasingly being used for the treatment of salivary gland duct stones. Sialo-irrigation of the salivary gland is an effective procedure for treating inflammation and providing symptomatic relief. This procedure can be employed for the treatment of sialolithiasis using the back pressure of instilled saline. Sialo-irrigation under ultrasound (US) guidance allows for dynamic studies showing real-time images during diagnostic or surgical procedure and can be used for the removal of sialoliths. In addition, it can also be used to remove primitive sialoliths and microliths by washing out the ductal system, which prevents the recurrence of sialoliths. The aim of this study was to propose a minimally invasive technique for sialolithiasis using US-guided sialo-irrigation.

Evaluation of a multi-stage convolutional neural network-based fully automated landmark identification system using cone-beam computed tomographysynthesized posteroanterior cephalometric images.

OBJECTIVE: To evaluate the accuracy of a multi-stage convolutional neural network (CNN) model-based automated identification system for posteroanterior (PA) cephalometric landmarks. METHODS: The multi-stage CNN model was implemented with a personal computer. A total of 430 PA-cephalograms synthesized from cone-beam computed tomography scans (CBCT-PA) were selected as samples. Twenty-three landmarks used for Tweemac analysis were manually identified on all CBCT-PA images by a single examiner. Intra-examiner reproducibility was confirmed by repeating the identification on 85 randomly selected images, which were subsequently set as test data, with a two-week interval before training. For initial learning stage of the multi-stage CNN model, the data from 345 of 430 CBCT-PA images were used, after which the multi-stage CNN model was tested with previous 85 images. The first manual identification on these 85 images was set as a truth ground. The mean radial error (MRE) and successful detection rate (SDR) were calculated to evaluate the errors in manual identification and artificial intelligence (AI) prediction. RESULTS: The AI showed an average MRE of 2.23 ± 2.02 mm with an SDR of 60.88% for errors of 2 mm or lower. However, in a comparison of the repetitive task, the AI predicted landmarks at the same position, while the MRE for the repeated manual identification was 1.31 ± 0.94 mm. CONCLUSIONS: Automated identification for CBCT-synthesized PA cephalometric landmarks did not sufficiently achieve the clinically favorable error range of less than 2 mm. However, AI landmark identification on PA cephalograms showed better consistency than manual identification.

Root proximity of the anchoring miniscrews of orthodontic miniplates in the mandibular incisal area: Cone-beam computed tomographic analysis.

OBJECTIVE: This outcome analysis study evaluated the actual positions of the orthodontic miniplate and miniplate anchoring screws (MPASs) and the risk factors affecting adjacent anatomic structures after miniplate placement in the mandibular incisal area. METHODS: Cone-beam computed tomographic images of 97 orthodontic miniplates and their 194 MPASs (diameter, 1.5 mm; length, 4 mm) in patients whose miniplates provided sufficient clinical stability for orthodontic treatment were retrospectively reviewed. For evaluating the actual positions of the miniplates and analyzing the risk factors, including the effects on adjacent roots, MPAS placement height (PH), placement depth (PD), plate angle (PA), mental fossa angle (MA), and root proximity were assessed using the paired t-test, analysis of variance, and generalized linear model and regression analyses. RESULTS: The mean PDs of MPASs at positions 1 (P1) and 2 (P2) were 2.01 mm and 2.23 mm, respectively. PA was significantly higher in the Class III malocclusion group than in the other groups. PH was positively correlated with MA and PD at P1. Of the 97 MPASs at P1, 49 were in the no-root area and 48 in the dentulous area; moreover, 19 showed a degree of root contact (19.6%) without root perforation. All MPASs at P2 were in the no-root area. CONCLUSIONS: Positioning the miniplate head approximately 1 mm lower than the mucogingival junction is highly likely to provide sufficient PH for the P1- MPASs to be placed in the no-root area.

Quantitative cone-beam computed tomography evaluation of hard and soft tissue thicknesses in the midpalatal suture region to facilitate orthodontic mini-implant placement.

OBJECTIVE: To identify the most favorable sites that optimize the initial stability and survival rate of orthodontic mini-implants, this study measured hard and soft tissue thicknesses in the median and paramedian regions of the palate using cone-beam computed tomography (CBCT) and determined possible sexand age-related differences in these thicknesses. METHODS: The study sample comprised CBCT images of 189 healthy subjects. The sample was divided into four groups according to age. A grid area was set for the measurement of hard and soft tissue thicknesses in the palate. Vertical lines were marked at intervals of 0, 1.5, and 3.0 mm lateral to the midpalatal suture, while horizontal lines were marked at 2-mm intervals up to 24 mm from the posterior margin of the incisive foramen. Measurements were made at 65 points of intersection between the horizontal and vertical lines. RESULTS: The palatal hard tissue thickness decreased from the anterior to the posterior region, with a decrease in the medial-to-lateral direction in the middle and posterior regions. While the soft tissue was rather thick around the lateral aspects of the palatal arch, it formed a constant layer that was only 1-2-mm thick throughout the palate. Statistically significant differences were observed according to sex and age. CONCLUSIONS: The anterolateral palate as well as the midpalatal suture seem to be the most favorable sites for insertion of orthodontic mini-implants. The thickness of the palate differed by age and sex; these differences should be considered while planning the placement of orthodontic mini-implants.

Geometry of anchoring miniscrew in the lateral palate that support a tissue bone borne maxillary expander affects neighboring root damage.

Anchoring miniscrews used for a tissue bone borne maxillary expander (C-expander) can fail if they contact tooth roots or perforate the maxillary sinus. Cone beam computed tomography images were reviewed retrospectively to evaluate the geometric factors of miniscrew placement in the palate that contribute to root proximity (RP) and sinus perforation (SP), and to investigate the differences of miniscrew placement depth (PD) and placement angle (PA) among the groups in each variable from 340 anchoring miniscrews on 70 patients whose C-expanders showed sufficient stability after palatal expansion for orthodontic treatment. Two types of miniscrews were used: a self-tapping miniscrew with 1.8 mm-in-diameter, and a self-drilling miniscrew with 1.6 mm-in-diameter. While the self-tapping larger diameter miniscrew influenced root proximity significantly, the screw location and PD affected the rate of sinus perforation. PA was significantly different between the right and left sides of the palate. The results of this study confirmed that root proximity and sinus perforation of anchoring miniscrews in a tissue bone borne palatal expander occurred due to certain risk factors, even when the palates were expanded successfully. Knowledge of these factors can help the clinician place miniscrews with less risk of root proximity or sinus perforation.

Effectiveness of 2D radiographs in detecting CBCT-based incidental findings in orthodontic patients.

Some craniofacial diseases or anatomical variations are found in radiographic images taken for other purposes. These incidental findings (IFs) can be detected in orthodontic patients, as various radiographs are required for orthodontic diagnosis. The radiographic data of 1020-orthodontic patients were interpreted to evaluate the rates of IFs in three-dimensional (3D) cone-beam-computed tomography (CBCT) with a large field of view (FOV) and investigate the effectiveness and accuracy of two-dimensional (2D) radiographs for detecting IFs compared to CBCT. Prevalence and accuracy in five areas was measured for sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV). The accuracies of various 2D-radiograph were compared through a proportion test. A total of 709-cases (69.5%) of 1020-subjects showed one or more IFs in CBCT images. Nasal cavity was the most affected area. Based on the CBCT images as a gold standard, different accuracies of various 2D-radiographs were observed in each area of the findings. The highest accuracy was confirmed in soft tissue calcifications with comprehensive radiographs. For detecting nasal septum deviations, postero-anterior cephalograms were the most accurate 2D radiograph. In cases the IFs were not determined because of its ambiguity in 2D radiographs, considering them as an absence of findings increased the accuracy.

Alveolar bone thickness and fenestration of incisors in untreated Korean patients with skeletal class III malocclusion: A retrospective 3-dimensional cone-beam computed tomography study.

PURPOSE: The purpose of this study was to evaluate vertical bone loss and alveolar bone thickness in the maxillary and mandibular incisors of patients with skeletal class III malocclusion. This study also aimed to evaluate the periodontal condition of class III malocclusion patients who had not undergone orthodontic treatment. MATERIALS AND METHODS: The sample included cone-beam computed tomography scans of 24 Korean subjects (3 male and 21 female). Alveolar bone thickness (ABT), alveolar bone area (ABA), alveolar bone loss (ABL), and fenestration of the maxillary and mandibular incisors were measured using 3-dimensional imaging software. RESULTS: All incisors displayed an ABT of less than 1.0 mm from the labial surface to root level 7 (70% of the root length). A statistically significant difference was observed between the mandibular labial and lingual ABAs and between the maxillary labial and mandibular labial ABAs. The lingual ABA of the mandibular lateral incisors was larger than that of the mandibular central incisors. ABL was severe on the labial surface. A statistically significant difference was observed between the maxillary and mandibular labial ABL values(21.8% and 34.4%, respectively). Mandibular lingual ABL (27.6%) was significantly more severe than maxillary lingual ABL (18.3%) (P<0.05). Eighty-two fenestrations were found on the labial surfaces of the incisors, while only 2 fenestrations were observed on the lingual surfaces. Fenestrations were most commonly observed at root level 6. CONCLUSION: Careful evaluation is needed before orthodontic treatment to avoid iatrogenic damage of periodontal support when treating patients with class III malocclusion.