Three-dimensional electronic microfliers inspired by wind-dispersed seeds.

Large, distributed collections of miniaturized, wireless electronic devices1,2 may form the basis of future systems for environmental monitoring3, population surveillance4, disease management5 and other applications that demand coverage over expansive spatial scales. Aerial schemes to distribute the components for such networks are required, and-inspired by wind-dispersed seeds6-we examined passive structures designed for controlled, unpowered flight across natural environments or city settings. Techniques in mechanically guided assembly of three-dimensional (3D) mesostructures7-9 provide access to miniature, 3D fliers optimized for such purposes, in processes that align with the most sophisticated production techniques for electronic, optoelectronic, microfluidic and microelectromechanical technologies. Here we demonstrate a range of 3D macro-, meso- and microscale fliers produced in this manner, including those that incorporate active electronic and colorimetric payloads. Analytical, computational and experimental studies of the aerodynamics of high-performance structures of this type establish a set of fundamental considerations in bio-inspired design, with a focus on 3D fliers that exhibit controlled rotational kinematics and low terminal velocities. An approach that represents these complex 3D structures as discrete numbers of blades captures the essential physics in simple, analytical scaling forms, validated by computational and experimental results. Battery-free, wireless devices and colorimetric sensors for environmental measurements provide simple examples of a wide spectrum of applications of these unusual concepts.

Extremely Stable Ag-Based Photonics, Plasmonic, Optical, and Electronic Materials and Devices Designed with Surface Chemistry Engineering for Anti-Tarnish.

Silver (Ag) metal-based structures are promising building blocks for next-generation photonics and electronics owing to their unique characteristics, such as high reflectivity, surface plasmonic resonance effects, high electrical conductivity, and tunable electron transport mechanisms. However, Ag structures exhibit poor sustainability in terms of device performance because harsh chemicals, particularly S2- ions present in the air, can damage their structures, lowering their optical and electrical properties. Here, the surface chemistry of Ag structures with (3-mercaptopropyl)trimethoxysilane (MPTS) ligands at room temperature and under ambient conditions is engineered to prevent deterioration of their optical and electrical properties owing to S2- exposure. Regardless of the dimensions of the Ag structures, the MPTS ligands can be applied to each dimension (0D, 1D, and 3D). Consequently, highly sustainable plasmonic effects (Δλ < 2 nm), Fabry-Perot cavity resonance structures (Δλ < 2 nm), reflectors (ΔRReflectance < 0.5%), flexible electrodes (ΔRelectrical < 0.1 Ω), and strain gauge sensors (ΔGF < 1), even in S2- exposing conditions is achieved. This strategy is believed to significantly contribute to environmental pollution reduction by decreasing the volume of electronic waste.

Defect Engineering of Metal Halide Perovskite Nanocrystals via Spontaneous Diffusion of Ag Nanocrystals.

Perovskite nanocrystals (NCs) have emerged as a promising building block for the fabrication of optic-/optoelectronic-/electronic devices owing to their superior characteristics, such as high absorption coefficient, rapid ion mobilities, and tunable energy levels. However, their low structural stability and poor surface passivation have restricted their application to next-generation devices. Herein, a drug delivery system (DDS)-inspired post-treatment strategy is reported for improving their structural stability by doping of Ag into CsPbBr3 (CPB) perovskite NCs; delivery to damaged sites can promote their structural recovery slowly and uniformly, averting the permanent loss of their intrinsic characteristics. Ag NCs are designed through surface-chemistry tuning and structural engineering to enable their circulation in CPB NC dispersions, followed by their delivery to the CPB NC surface, defect-site recovery, and defect prevention. The perovskite-structure healing process through the DDS-type process (with Ag NCs as the drug) is analyzed by a combination of theoretical calculations (with density functional theory) and experimental analyses. The proposed DDS-inspired healing strategy significantly enhances the optical properties and stability of perovskite NCs, enabling the fabrication of white light-emitting diodes.

Understanding Colloidal Quantum Dot Device Characteristics with a Physical Model.

Colloidal quantum dots (CQDs) are finding increasing applications in optoelectronic devices, such as photodetectors and solar cells, because of their high material quality, unique and attractive properties, and process flexibility without the constraints of lattice match and thermal budget. However, there is no adequate device model for colloidal quantum dot heterojunctions, and the popular Shockley-Quiesser diode model does not capture the underlying physics of CQD junctions. Here, we develop a compact, easy-to-use model for CQD devices rooted in physics. We show how quantum dot properties, QD ligand binding, and the heterointerface between quantum dots and the electron transport layer (ETL) affect device behaviors. We also show that the model can be simplified to a Shockley-like equation with analytical approximate expressions for reverse saturation current, ideality factor, and quantum efficiency. Our model agrees well with the experiment and can be used to describe and optimize CQD device performance.

High-Performance Self-Powered Quantum Dot Infrared Photodetector with Azide Ion Solution Treated Electron Transport Layer.

The demand for self-powered photodetectors (PDs) capable of NIR detection without external power is growing with the advancement of NIR technologies such as LIDAR and object recognition. Lead sulfide quantum dot-based photodetectors (PbS QPDs) excel in NIR detection; however, their self-powered operation is hindered by carrier traps induced by surface defects and unfavorable band alignment in the zinc oxide nanoparticle (ZnO NP) electron-transport layer (ETL). In this study, an effective azide-ion (N3 - ) treatment is introduced on a ZnO NP ETL to reduce the number of traps and improve the band alignment in a PbS QPD. The ZnO NP ETL treated with azide ions exhibited notable improvements in carrier lifetime and mobility as well as an enhanced internal electric field within the thin-film heterojunction of the ZnO NPs and PbS QDs. The azide-ion-treated PbS QPD demonstrated a increase in short-circuit current density upon NIR illumination, marking a responsivity of 0.45 A W-1 , specific detectivity of 4 × 1011 Jones at 950 nm, response time of 8.2 µs, and linear dynamic range of 112 dB.

Trioctylphosphine-assisted morphology control of ZnO nanoparticles.

This study investigates the morphological change in colloidal ZnO nanoparticles (NPs) synthesized with trioctylphosphine (TOP). The addition of TOP to the synthesis causes an evolution in the shape of ZnO NPs to tadpole-like particles from quasi-spherical particles at 300 °C. The total length of the tadpole-like ZnO NPs can be modified by controlling the molar ratio of TOP to oleylamine (OLAM). The tadpole-like particles are elongated as the concentration of TOP increased but decreased when the addition of TOP is excessive. These tadpole-like ZnO NPs transform to quasi-spherical NPs regardless of the amount of TOP at a reaction time of 3 h at 300 °C. At 200 °C, the effect of TOP on the ZnO NP synthesis differs from that at 300 °C. The ZnO NPs synthesized by controlling the molar ratios of surfactant ligands (TOP:OLAM = 2:100 and 70:100) at 200 °C share similar amorphous structures, while a crystalline ZnO phase is formed when the reaction time is 3 h. X-ray photoelectron spectroscopy analysis shows that TOP influences the oxidation of ZnO and suggests that a combination of OLAM and TOP plays a role in controlling the shape of ZnO NPs. These results provide critical insights to the utilization of TOP for a shape controlling ligand in ZnO NPs and suggest a new route to design oxide NPs.

Hierarchical Materials Design by Pattern Transfer Printing of Self-Assembled Binary Nanocrystal Superlattices.

We demonstrate the fabrication of hierarchical materials by controlling the structure of highly ordered binary nanocrystal superlattices (BNSLs) on multiple length scales. Combinations of magnetic, plasmonic, semiconducting, and insulating colloidal nanocrystal (NC) building blocks are self-assembled into BNSL membranes via the liquid-interfacial assembly technique. Free-standing BNSL membranes are transferred onto topographically structured poly(dimethylsiloxane) molds via the Langmuir-Schaefer technique and then deposited in patterns onto substrates via transfer printing. BNSLs with different structural motifs are successfully patterned into various meso- and microstructures such as lines, circles, and even three-dimensional grids across large-area substrates. A combination of electron microscopy and grazing incidence small-angle X-ray scattering (GISAXS) measurements confirm the ordering of NC building blocks in meso- and micropatterned BNSLs. This technique demonstrates structural diversity in the design of hierarchical materials by assembling BNSLs from NC building blocks of different composition and size by patterning BNSLs into various size and shape superstructures of interest for a broad range of applications.

Engineering the Charge Transport of Ag Nanocrystals for Highly Accurate, Wearable Temperature Sensors through All-Solution Processes.

All-nanocrystal (NC)-based and all-solution-processed wearable resistance temperature detectors (RTDs) are introduced. The charge transport mechanisms of Ag NC thin films are engineered through various ligand treatments to design high performance RTDs. Highly conductive Ag NC thin films exhibiting metallic transport behavior with high positive temperature coefficients of resistance (TCRs) are achieved through tetrabutylammonium bromide treatment. Ag NC thin films showing hopping transport with high negative TCRs are created through organic ligand treatment. All-solution-based, one-step photolithography techniques that integrate two distinct opposite-sign TCR Ag NC thin films into an ultrathin single device are developed to decouple the mechanical effects such as human motion. The unconventional materials design and strategy enables highly accurate, sensitive, wearable and motion-free RTDs, demonstrated by experiments on moving or curved objects such as human skin, and simulation results based on charge transport analysis. This strategy provides a low cost and simple method to design wearable multifunctional sensors with high sensitivity which could be utilized in various fields such as biointegrated sensors or electronic skin.

Designing Metallic and Insulating Nanocrystal Heterostructures to Fabricate Highly Sensitive and Solution Processed Strain Gauges for Wearable Sensors.

All-solution processed, high-performance wearable strain sensors are demonstrated using heterostructure nanocrystal (NC) solids. By incorporating insulating artificial atoms of CdSe quantum dot NCs into metallic artificial atoms of Au NC thin film matrix, metal-insulator heterostructures are designed. This hybrid structure results in a shift close to the percolation threshold, modifying the charge transport mechanism and enhancing sensitivity in accordance with the site percolation theory. The number of electrical pathways is also manipulated by creating nanocracks to further increase its sensitivity, inspired from the bond percolation theory. The combination of the two strategies achieves gauge factor up to 5045, the highest sensitivity recorded among NC-based strain gauges. These strain sensors show high reliability, durability, frequency stability, and negligible hysteresis. The fundamental charge transport behavior of these NC solids is investigated and the combined site and bond percolation theory is developed to illuminate the origin of their enhanced sensitivity. Finally, all NC-based and solution-processed strain gauge sensor arrays are fabricated, which effectively measure the motion of each finger joint, the pulse of heart rate, and the movement of vocal cords of human. This work provides a pathway for designing low-cost and high-performance electronic skin or wearable devices.

Engineering charge injection and charge transport for high performance PbSe nanocrystal thin film devices and circuits.

We study charge injection and transport in PbSe nanocrystal thin films. By engineering the contact metallurgy and nanocrystal ligand exchange chemistry and surface passivation, we demonstrate partial Fermi-level pinning at the metal-nanocrystal interface and an insulator-to-metal transition with increased coupling and doping, allowing us to design high conductivity and mobility PbSe nanocrystal films. We construct complementary nanocrystal circuits from n-type and p-type transistors realized from a single nanocrystal material by selecting the contact metallurgy.

Gate-induced carrier delocalization in quantum dot field effect transistors.

We study gate-controlled, low-temperature resistance and magnetotransport in indium-doped CdSe quantum dot field effect transistors. We show that using the gate to accumulate electrons in the quantum dot channel increases the "localization product" (localization length times dielectric constant) describing transport at the Fermi level, as expected for Fermi level changes near a mobility edge. Our measurements suggest that the localization length increases to significantly greater than the quantum dot diameter.

Designing high-performance PbS and PbSe nanocrystal electronic devices through stepwise, post-synthesis, colloidal atomic layer deposition.

We report a simple, solution-based, postsynthetic colloidal, atomic layer deposition (PS-cALD) process to engineer stepwise the surface stoichiometry and therefore the electronic properties of lead chalcogenide nanocrystal (NC) thin films integrated in devices. We found that unlike chalcogen-enriched NC surfaces that are structurally, optically, and electronically unstable, lead chloride treatment creates a well-passivated shell that stabilizes the NCs. Using PS-cALD of lead chalcogenide NC thin films we demonstrate high electron field-effect mobilities of ∼4.5 cm(2)/(V s).

Synthesis and Characteristics of Mesoporous Copper Cobalt Oxides Using the Inverse Micelle Method Fabricated for Supercapacitors.

Mesoporous materials have gained considerable attention in the fabrication of supercapacitor electrodes because of their large surface areas and controlled porosities. This study reports the synthesis of mesoporous CuCo2O4 powders using the inverse micelle method. X-ray diffraction, N2 sorption measurement, transmission electron microscopy, and X-ray photoelectron spectroscopy were performed to investigate the properties of the powders. After heat treatment at 250 °C in a vacuum atmosphere, the mesoporous CuCo2O4 powders exhibited a large specific surface area of 116.32 m2 g-1 and a high crystallinity. The electrode fabricated by using the as-prepared mesoporous CuCo2O4 powder exhibited enhanced electrical properties with a maximum specific capacitance of 140 F g-1 and capacitance retention of 91.4% after 3000 continuous charge-discharge cycles. Therefore, the as-prepared mesoporous CuCo2O4 powders hold great potential in the fabrication of supercapacitor electrodes to be used for a wide range of electrochemical applications.

Smart building block with colored radiative cooling devices and quantum dot light emitting diodes.

In this study, we design a smart building block with quantum-dot light-emitting diode (QLED) and colored radiative cooling devices. A smart light-emitting building block is fabricated using a bottom-inverted QLED that emits green light, an insulating layer, and a top radiative cooling structure that emits mid-infrared light. The heat generated during QLED operation is measured and analyzed to investigate the correlation between heat and QLED degradation. The top cooling part is designed to have no impact on the QLED's performance and utilizes Ag-polydimethylsiloxane as a visible-light reflector and mid-infrared absorber/emitter. For the colored cooling part, white radiative cooling paint is used instead of Ag-polydimethylsiloxane to improve cooling performance, and red and yellow paints are employed to realize vivid red and yellow colors, respectively. We demonstrate a smart imitation house system with a smart light-emitting building block as the roof and analyze the cooling of the heat generated during QLED operation. A maximum cooling effect of up to 9.6 °C is observed compared to the imitation house system without the smart light-emitting building block, effectively dissipating heat generated during QLED operation. The smart light-emitting building block presented in this study opens new avenues in the fields of lighting and cooling systems.

Ultra-Low Noise Level Infrared Quantum Dot Photodiodes with Self-Screenable Polymeric Optical Window.

Quantum dot photodiodes (QPDs) have garnered significant attention because of their unparalleled near-infrared (NIR) detection capabilities, primarily attributable to their size-dependent bandgap tunability. Nevertheless, the broadband absorption spectrum of QPD engenders substantial noise floor within superfluous visible light regions, notably hindering their use in several emerging applications necessitating the detection of faint micro-light signals. To overcome these hurdles, a self-screenable NIR QPD featuring an internal optical filter with a thick polymeric interlayer to reduce electronic noise is demonstrated. This effectively screens out undesirable visible light regions while reducing the ionized defect owing to decreased density of state, yielding an extremely low dark current (≈1010 A cm-2 at V = -1 V). Consequently, the electronic noise spectral density is attained at levels below ≈10-27 -10-28 A2 Hz-1 , and responsivity (R) dropped to 92% within the visible light spectrum.

An ultra-sensitive colloidal quantum dot infrared photodiode exceeding 100 000% external quantum efficiency via photomultiplication.

In this study, we present ultrasensitive infrared photodiodes based on PbS colloidal quantum dots (CQDs) using a double photomultiplication strategy that utilizes the accumulation of both electron and hole carriers. While electron accumulation was induced by ZnO trap states that were created by treatment in a humid atmosphere, hole accumulation was achieved using a long-chain ligand that increased the barrier to hole collection. Interestingly, we obtained the highest responsivity in photo-multiplicative devices with the long ligands, which contradicts the conventional belief that shorter ligands are more effective for optoelectronic devices. Using these two charge accumulation effects, we achieved an ultrasensitive detector with a responsivity above 7.84 × 102 A W-1 and an external quantum efficiency above 105% in the infrared region. We believe that the photomultiplication effect has great potential for surveillance systems, bioimaging, remote sensing, and quantum communication.

Ultrathin, High-Aspect-Ratio Bismuth Sulfohalide Nanowire Bundles for Solution-Processed Flexible Photodetectors.

In this study, a novel synthesis of ultrathin, highly uniform colloidal bismuth sulfohalide (BiSX where X = Cl, Br, I) nanowires (NWs) and NW bundles (NBs) for room-temperature and solution-processed flexible photodetectors are presented. High-aspect-ratio bismuth sulfobromide (BiSBr) NWs are synthesized via a heat-up method using bismuth bromide and elemental S as precursors and 1-dodecanethiol as a solvent. Bundling of the BiSBr NWs occurs upon the addition of 1-octadecene as a co-solvent. The morphologies of the BiSBr NBs are easily tailored from sheaf-like structures to spherulite nanostructures by changing the solvent ratio. The optical bandgaps are modulated from 1.91 (BiSCl) and 1.88 eV (BiSBr) to 1.53 eV (BiSI) by changing the halide compositions. The optical bandgap of the ultrathin BiSBr NWs and NBs exhibits blueshift, whose origin is investigated through density functional theory-based first-principles calculations. Visible-light photodetectors are fabricated using BiSBr NWs and NBs via solution-based deposition followed by solid-state ligand exchanges. High photo-responsivities and external quantum efficiencies (EQE) are obtained for BiSBr NW and NB films even under strain, which offer a unique opportunity for the application of the novel BiSX NWs and NBs in flexible and environmentally friendly optoelectronic devices.

Photonic control of ligand nanospacing in self-assembly regulates stem cell fate.

Extracellular matrix (ECM) undergoes dynamic inflation that dynamically changes ligand nanospacing but has not been explored. Here we utilize ECM-mimicking photocontrolled supramolecular ligand-tunable Azo+ self-assembly composed of azobenzene derivatives (Azo+) stacked via cation-π interactions and stabilized with RGD ligand-bearing poly(acrylic acid). Near-infrared-upconverted-ultraviolet light induces cis-Azo+-mediated inflation that suppresses cation-π interactions, thereby inflating liganded self-assembly. This inflation increases nanospacing of "closely nanospaced" ligands from 1.8 nm to 2.6 nm and the surface area of liganded self-assembly that facilitate stem cell adhesion, mechanosensing, and differentiation both in vitro and in vivo, including the release of loaded molecules by destabilizing water bridges and hydrogen bonds between the Azo+ molecules and loaded molecules. Conversely, visible light induces trans-Azo+ formation that facilitates cation-π interactions, thereby deflating self-assembly with "closely nanospaced" ligands that inhibits stem cell adhesion, mechanosensing, and differentiation. In stark contrast, when ligand nanospacing increases from 8.7 nm to 12.2 nm via the inflation of self-assembly, the surface area of "distantly nanospaced" ligands increases, thereby suppressing stem cell adhesion, mechanosensing, and differentiation. Long-term in vivo stability of self-assembly via real-time tracking and upconversion are verified. This tuning of ligand nanospacing can unravel dynamic ligand-cell interactions for stem cell-regulated tissue regeneration.

Bandlike transport in strongly coupled and doped quantum dot solids: a route to high-performance thin-film electronics.

We report bandlike transport in solution-deposited, CdSe QD thin-films with room temperature field-effect mobilities for electrons of 27 cm(2)/(V s). A concomitant shift and broadening in the QD solid optical absorption compared to that of dispersed samples is consistent with electron delocalization and measured electron mobilities. Annealing indium contacts allows for thermal diffusion and doping of the QD thin-films, shifting the Fermi energy, filling traps, and providing access to the bands. Temperature-dependent measurements show bandlike transport to 220 K on a SiO(2) gate insulator that is extended to 140 K by reducing the interface trap density using an Al(2)O(3)/SiO(2) gate insulator. The use of compact ligands and doping provides a pathway to high performance, solution-deposited QD electronics and optoelectronics.

Highly Conductive and Sensitive Wearable Strain Sensors with Metal/Nanoparticle Double Layer for Noninterference Voice Detection.

Human voice recognition via skin-attachable devices has significant potential for gathering important physiological information from acoustic data without background noise interference. In this study, a highly sensitive and conductive wearable crack-based strain sensor was developed for voice-recognition systems. The sensor was fabricated using a double-layer structure of Ag nanoparticles (NPs) and Ag metal on a biocompatible polydimethylsiloxane substrate. The top metal layer acts as a conducting active layer, whereas the bottom Ag NP layer induces channel cracks in the upper layer, effectively hindering current flow. Subsequently, the double-layer film exhibits a low electrical resistance value (<5 × 10-5 Ω cm), ultrahigh sensitivity (gauge factor = 1870), and a fast response/recovery time (252/168 µs). A sound wave was detected at a high frequency of 15 kHz with a signal-to-noise ratio (SNR) over 40 dB. The sensor exhibited excellent anti-interference characteristics and effectively differentiated between different voice qualities (modal, pressed, and breathy), with a systematic analysis revealing successful detection of the laryngeal state and glottal source. This ultrasensitive wearable sensor has potential applications in various physiological signal measurement methods, personalized healthcare systems, and ubiquitous computing.