RESUMO
The objective of this study was to investigate the in vivo biomechanical performance of bone defects implanted with novel bilayer hydroxyapatite (HAp) scaffolds that mimic the cortical and cancellous organization of bone. The scaffolds maintained architectural continuity in a rabbit radius segmental defect model and were compared to an untreated defect group (negative control) and autologous bone grafts (positive control). Micro-CT evaluations indicated total bone and scaffold volume in the experimental group was significantly greater than the defect group but lesser than the autologous bone graft treatment. The flexural toughness of the scaffold and the autograft groups was significantly greater than the flexural toughness of the defect group. Interestingly, the absolute density of the bone mineral as well as calcium to phosphorus (Ca/P) ratio in that mineral for the scaffold and autograft contralateral bones was significantly higher than those for the defect contralaterals suggesting that the scaffolds contributed to calcium homeostasis. It was concluded from this study that new bone regenerated in the bilayer HAp scaffolds was comparable to the empty defects and while the HAp scaffolds provided significant increase in modulus when compared to empty defect and their flexural toughness was comparable to autografts after 8 weeks of implantation.
Assuntos
Fenômenos Biomecânicos , Osso e Ossos/patologia , Engenharia Tecidual/métodos , Animais , Densidade Óssea , Regeneração Óssea , Substitutos Ósseos , Transplante Ósseo , Hidroxiapatitas/química , Porosidade , Coelhos , Regeneração , Fatores de Tempo , Alicerces Teciduais/química , Microtomografia por Raio-X/métodosRESUMO
This study investigated the in vitro effect of low-intensity pulsed ultrasound (LIPUS) on human embryonic palatal mesenchyme cells (HEPM, CRL-1486, ATCC, Manassas, VA), an osteoblast precursor cell line, during early adhesion to calcium phosphate scaffolds. Hydroxyapatite (HA) and beta-tricalcium phosphate (TCP) ceramic scaffolds were produced by a template coating method. Phospho-specific antibody cell-based ELISA (PACE) technique was utilized on stress activation proteins, including the extracellular signal-regulated kinase (ERK1/2), P38, c-Jun N-terminal kinase (JNK) and the anti-apoptosis mediator protein kinase B (PKB/AKT). Cell-based ELISAs were also performed on the membrane anchoring protein vinculin and alpha6beta4 integrin. LIPUS stimulated activation of PERK 1/2, PJNK, PP38 and vinculin in traditional two-dimensional (2-D) culture. Calcium release from the scaffolds was partially involved in the activation of PERK 1/2 when cell response was compared between culture on 2-D surfaces and three-dimensional (3-D) HA and TCP scaffolds. Effects of calcium extracted media from scaffolds alone could not account for the full activation of PJNK, PP38, PAKT, vinculin and alpha6beta4 integrin. LIPUS stimulation further increased PERK activity on TCP scaffolds corresponding with an increase in both vinculin and alpha6beta4 integrin levels. It was concluded from this study that LIPUS treatment can significantly affect stress signaling mediators and adhesion proteins in osteoblast precursor cells during the early cell-attachment phase to trabecular patterned scaffolds.
Assuntos
Fosfatos de Cálcio/química , Células-Tronco Mesenquimais/fisiologia , Células-Tronco Mesenquimais/efeitos da radiação , Osteoblastos/fisiologia , Osteoblastos/efeitos da radiação , Transdução de Sinais/fisiologia , Sonicação , Adesão Celular/efeitos da radiação , Diferenciação Celular/efeitos da radiação , Sobrevivência Celular/efeitos da radiação , Células Cultivadas , Humanos , Teste de Materiais , Células-Tronco Mesenquimais/citologia , Osteoblastos/citologia , Doses de Radiação , Transdução de Sinais/efeitos da radiaçãoRESUMO
The objective of this research was to investigate stress-signaling patterns in response to two-dimensional (2-D) and three-dimensional (3-D) calcium phosphate (CP) materials using human embryonic palatal mesenchyme cells (HEPM, CRL-1486, ATCC, Manassas, VA), an osteoblast precursor cell line. Control discs and scaffolds were fabricated from hydroxyapatite and beta tri-CP ceramics. Phospho-specific antibody cell-based ELISA technique was utilized on members of the mitogen-activated protein kinase cascade including; the extracellular signal-regulated kinases (ERK1/2), p38, c-Jun N-terminal kinase (JNK), and the anti-apoptosis mediator protein kinase B (AKT). Quantification of these signals was evaluated during the early attachment phase of osteoblast precursor cells. In this study, it was observed that 3-D CP scaffolds significantly activated the stress mediators p38 and JNK but not ERK1/2. This signal trend was matched with an up-regulation in AKT, suggesting the ability of cells to manage high stress signals in response to 3-D CP architecture and that 3-D CP scaffolds are necessary for studies simulating a natural trabecular bone organization. The absence of these signals in 2-D CP surfaces indicated the importance of local architecture conditions on cell stress response. It was concluded from this study that osteoblast precursor cells cultured in 3-D CP scaffolds experience greater stress-signaling patterns when compared to 2-D CP surfaces.
Assuntos
Fosfatos de Cálcio/farmacologia , Osteoblastos/citologia , Transdução de Sinais/efeitos dos fármacos , Células-Tronco/efeitos dos fármacos , Células-Tronco/metabolismo , Materiais Biocompatíveis/metabolismo , Materiais Biocompatíveis/farmacologia , Adesão Celular , Sobrevivência Celular , Células Cultivadas , Durapatita/metabolismo , Ativação Enzimática , Humanos , Proteínas Quinases JNK Ativadas por Mitógeno/metabolismo , Vértebras Lombares/metabolismo , Proteína Quinase 1 Ativada por Mitógeno/metabolismo , Proteína Quinase 3 Ativada por Mitógeno/metabolismo , Proteínas Proto-Oncogênicas c-akt/metabolismo , Células-Tronco/enzimologia , Proteínas Quinases p38 Ativadas por Mitógeno/metabolismoRESUMO
The present study investigated the ectopic osteoinduction and early degradation of recombinant human bone morphogenetic protein-2 (rhBMP-2)-loaded porous beta-tricalcium phosphate (beta-TCP) in mice. The porous beta-TCP with 50 microg of rhBMP-2 (n = 25) and porous beta-TCP (control group, n = 25) were implanted into muscle pouches in the right and left thigh of 28-day-old mice (n = 25), respectively. At every time point (3, 7, 14, 21 and 28 days after implantation), five mice were euthanized and the histological examinations of implantation sites were performed. In addition, the alkaline phosphatase (ALP) activity was also quantitatively analyzed. For the rhBMP-2-loaded group, blood vessel formation and immature cartilage was observed within the porous beta-TCP 3 days after implantation. Mature cartilage was observed 7 days after implantation of rhBMP-2-loaded porous beta-TCP. Newly formed woven bone, lamellar bone as well as marrow were observed 14 and 21 days after implantation of the rhBMP-2-loaded porous beta-TCP. Lamellar bone and marrow were observed 28 days after implantation of the rhBMP-2-loaded porous beta-TCP. For the control group, no bone or cartilage was observed at all time points. However, multinucleated giant cells and fibrous tissues were observed in the control group at 7 and 28 days after implantation, respectively. At 21 and 28 days after implantation, porous beta-TCP was observed to fragment indicating early degradation of the porous beta-TCP in both groups. In addition, ALP was observed to be significantly higher in the rhBMP-2-loaded beta-TCP as compared to the control beta-TCP. It was concluded from this study that the rhBMP-2-loaded porous beta-TCP induced blood vessel and ectopic bone formation.
Assuntos
Implantes Absorvíveis , Proteínas Morfogenéticas Ósseas/administração & dosagem , Substitutos Ósseos/química , Fosfatos de Cálcio/química , Implantes de Medicamento/administração & dosagem , Osteoblastos/patologia , Osteogênese/efeitos dos fármacos , Fator de Crescimento Transformador beta/administração & dosagem , Animais , Materiais Biocompatíveis/química , Proteína Morfogenética Óssea 2 , Diferenciação Celular/efeitos dos fármacos , Coristoma/patologia , Coristoma/fisiopatologia , Masculino , Teste de Materiais , Camundongos , Osteoblastos/efeitos dos fármacos , Osteoblastos/fisiologia , PorosidadeRESUMO
PURPOSE: The influence of calcium phosphate (CaP) and hydroxyapatite (HA) crystallinity on bone-implant osseointegration is not well established. In this study, the effect of HA crystallinity and coating method on bone-implant osseointegration was investigated using a rat tibia model. MATERIALS AND METHODS: HA coatings 1 to 5 microm thick were produced using a supersonic particle acceleration (SPA) technology. The HA crystallinities used for this study were weight ratios of 30%, 50%, 70%, and 90%. A total of 128 HA-coated implants were placed into the tibiae of 64 male Sprague-Dawley rats. Bone-implant interfaces were evaluated using histology and push-out strength testing at 3 and 9 weeks after implantation. RESULTS: The 70% crystalline coatings exhibited significantly greater interfacial strength (5 implants/time point/treatment) than the 30%, 50%, and 90% crystalline coatings at 3 and 9 weeks following implantation. The implants with coatings of 70% crystallinity also had the greatest bone contact length. In addition, the HA coatings produced with SPA demonstrated greater interfacial strength and bone contact length than plasma-sprayed HA coatings (except for the HA coating with 30% crystallinity). DISCUSSION: HA coatings of different crystallinities exhibited different dissolution and re-precipitation properties which may enhance early bone formation and bone bonding. CONCLUSIONS: This study suggested that coating crystallinity and coating methods can influence the bone-implant interface.
Assuntos
Materiais Revestidos Biocompatíveis , Implantes Dentários , Durapatita/química , Análise de Variância , Animais , Materiais Revestidos Biocompatíveis/química , Cristalização , Análise do Estresse Dentário , Implantes Experimentais , Masculino , Teste de Materiais , Osseointegração , Ratos , Ratos Sprague-Dawley , Resistência ao Cisalhamento , Resistência à Tração , TíbiaRESUMO
In the present study, the in vitro biocompatibility of calcium metaphosphate (CMP) with human bone marrow stromal cells (HBMSCs) and its effect on osteoblastic differentiation have been investigated. Powder and disk forms of CMP do not exert a cytotoxic effect on the HBMSCs undergoing osteoblastic differentiation. In addition, the HBMSCs adhere to the surface of the CMP disk as successfully as to the culture plate or hydroxyapatite (HA) disk. The HBMSCs adhered to either the HA or CMP disk display an undistinguishable actin arrangement and cellular phenotypes, indicating that the CMP does not disrupt normal cellular responses. An analysis of the differentiation of the HBMSCs cultured on culture plate, the HA and the CMP disk shows that three matrices are capable of supporting osteoblastic differentiation of the HBMSCs as accessed by alkaline phosphatase (ALP) staining. Further molecular analysis of osteoblastic differentiation of HBMSCs reveals that the CMP disk has a better ability than the HA disk to induce an expression of osteoblast-related genes, including ALP, osteoprotegerin (OPG), a decoy receptor for RANK ligand, and osteopontin (OPN), a non-collagenous bone matrix protein. The results demonstrate that, in addition to favorable biocompatibility, the CMP can stimulate osteoblastic differentiation of the HBMSCs in vitro.
Assuntos
Materiais Biocompatíveis/química , Células da Medula Óssea/citologia , Células da Medula Óssea/fisiologia , Fosfatos de Cálcio/química , Osteoblastos/citologia , Osteoblastos/fisiologia , Adesão Celular/fisiologia , Diferenciação Celular/fisiologia , Divisão Celular , Tamanho Celular/fisiologia , Sobrevivência Celular , Células Cultivadas , Humanos , Teste de Materiais , Osseointegração/fisiologia , Osteogênese/fisiologia , Células Estromais/citologia , Células Estromais/fisiologia , Propriedades de SuperfícieRESUMO
PURPOSE: The frequency of alveolar ridge resorption and crestal bone loss emphasizes the clinical need for bone graft substitutes to improve local bone quality prior to dental implant placement. Microcomputed tomography has been extensively employed to estimate bone quality more objectively (ie, quantitatively) by relating it to architectural parameters. In the present study, the mechanical properties of open cellular fully interconnected bilayer hydroxyapatite scaffolds, which mimicked the cortical shell/trabecular core architecture of human bone, were investigated for suitability as bone graft substitutes for maxillofacial reconstruction. MATERIALS AND METHODS: Hydroxyapatite scaffolds with different architectures were fabricated using polymeric template pore sizes of 450 or 340 µm for the inner trabecular cores and 200 or 250 µm for the outer cortical shells in three different core-to-shell volume ratios. The architectural and mechanical properties and fluid permeability of the scaffolds were compared to reported values for maxillofacial bone. RESULTS: Whereas the elastic moduli of the scaffolds were comparable, their compressive strength was observed to be in the lower range of human mandibular trabecular bone. The microcomputed tomography architectural indices for the scaffolds were comparable to those of human trabecular bone at different locations in the human body, including the maxilla and mandible. Scaffold compressive strength, elastic modulus, and fluid conductance were 0.3 to 2.3 MPa, 40.9 to 668.1 MPa, and 8.8 to 49.9 x 10-10 m3s-1Pa-1, respectively. CONCLUSION: Open-pore bilayer scaffolds can be fabricated to exhibit sufficient mechanical integrity for maxillofacial bone graft applications to match specific bone site architecture while providing sufficient permeability to sustain bone regeneration.
Assuntos
Materiais Biocompatíveis/química , Durapatita/química , Engenharia Tecidual/métodos , Alicerces Teciduais/química , Substitutos Ósseos/química , Força Compressiva , Módulo de Elasticidade , Dureza , Humanos , Mandíbula/anatomia & histologia , Maxila/anatomia & histologia , Fenômenos Mecânicos , Procedimentos Cirúrgicos Bucais , Permeabilidade , Porosidade , Desenho de Prótese , Reologia , Propriedades de Superfície , Microtomografia por Raio-XRESUMO
The goal of this in vivo study was to evaluate the osteoinductive and angio-inductive properties of a porous hydroxyapatite (HAp) scaffold with immobilized recombinant bone morphogenetic protein-2 (rhBMP-2) on the surface. It was hypothesized in this study that the use of a rhBMP-2 incorporated polyelectrolyte coating on the HAp scaffold would allow for controlled exposure of rhBMP-2 into the tissue and would provide a sound platform for tissue growth. The scaffolds were characterized for porosity and interconnectivity using pycnometry, scanning electron microscopy and micro-ct. These scaffolds were then divided into the following four groups: (a) HAp scaffold (n-HAp group), (b) rhBMP-2 physically adsorbed on HAp scaffold (HAp-BMP-2 Group), (c) polyelectrolyte coating on HAp scaffold without rhBMP-2 (HAp-PEI Scaffold Group), and (d) polyelectrolyte coating tethered with rhBMP-2 on HAp scaffold (HAp-PEI-BMP-2 Scaffold Group). Using 18 skeletally matured New Zealand white rabbits, these scaffolds were evaluated in a nonload bearing femoral condyle plug model. The negative controls for this study have defects that were left untreated and the positive controls have defects that were filled with autologous bone graft harvested from epsilateral iliac crest. Bone induction, vessel growth, and scaffold-bone contact were analyzed after 8-week implantation using micro-CT and histomorphometry. It was concluded from this study that the use of scaffold with an attached rhBMP-2 increased the vascularization around the implant when compared with the uncoated n-HAp scaffold, a necessary step of bone regeneration. The open-pore HAp scaffold was also concluded to provide a platform for tissue growth, drug loading, and tissue interaction.
Assuntos
Proteína Morfogenética Óssea 2/farmacologia , Regeneração Óssea/efeitos dos fármacos , Substitutos Ósseos/farmacologia , Materiais Revestidos Biocompatíveis/farmacologia , Durapatita/farmacocinética , Teste de Materiais , Alicerces Teciduais , Animais , Proteína Morfogenética Óssea 2/química , Substitutos Ósseos/química , Materiais Revestidos Biocompatíveis/química , Durapatita/química , Fêmur/diagnóstico por imagem , Fêmur/lesões , Fêmur/metabolismo , Humanos , Coelhos , Proteínas Recombinantes/química , Proteínas Recombinantes/farmacologia , Microtomografia por Raio-XRESUMO
Polymer-based platforms in drug-eluting stents (DESs) can cause adverse reactions in patients. Hence, the development of a polymer-free drug delivery platform may reduce adverse reactions to DES. In this study, the use of a polymer-free platform, self-assembled monolayers (SAMs), is explored for delivering an antiproliferative drug [paclitaxel (PAT)] from a stent material [cobalt-chromium ((Co-Cr) alloy]. Initially, carboxylic acid terminated phosphonic acid SAMs were coated on Co-Cr alloy. Two different doses (25 and 100 µg/cm²) of PAT were coated on SAM coated Co-Cr surfaces using a microdrop deposition method. Also, control experiments were carried out to coat PAT directly on Co-Cr surfaces with no SAM modification. The PAT coated specimens were characterized using the Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and atomic force microscopy (AFM). FTIR spectra showed the successful deposition of PAT on SAM coated and control-Co-Cr surfaces. SEM images showed islands of high density PAT crystals on SAM coated surfaces, while low density PAT crystals were observed on control-Co-Cr alloy. AFM images showed molecular distribution of PAT on SAM coated as well as control-Co-Cr alloy surfaces. In vitro drug release studies showed that PAT was released from SAM coated Co-Cr surfaces in a biphasic manner (an initial burst release in first 7 days was followed by a slow release for up to 35 days), while the PAT was burst released from control-Co-Cr surfaces within 1-3 days. Thus, this study demonstrated the use of SAMs for delivering PAT from Co-Cr alloy surfaces for potential use in drug-eluting stents.
Assuntos
Ligas/metabolismo , Antineoplásicos Fitogênicos/farmacocinética , Cromo/metabolismo , Materiais Revestidos Biocompatíveis/metabolismo , Cobalto/metabolismo , Portadores de Fármacos/metabolismo , Paclitaxel/farmacocinética , Ligas/química , Cromatografia Líquida de Alta Pressão , Cromo/química , Materiais Revestidos Biocompatíveis/química , Cobalto/química , Portadores de Fármacos/química , Sistemas de Liberação de Medicamentos , Humanos , Microscopia de Força Atômica , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Regeneration of bone in large segmental bone defects requires regeneration of both cortical bone and trabecular bone. A scaffold design consisting of a hydroxyapatite (HA) ring surrounding a polylactic acid (PLA) core simulates the structure of bone and provides an environment for indirect and direct co-culture conditions. In this experiment, human umbilical vein endothelial cells (EC) and normal human primary osteoblasts (OB) were co-cultured to evaluate cell migration and interactions within this biphasic composite scaffold. Both cell types were able to migrate between the different material phases of the scaffold. It was also observed that OB migration increased when they were co-cultured with ECs, whereas EC migration decreased in co-culture. The results show that co-culture of ECs and OBs in this composite biphasic scaffold allows for migration of cells throughout the scaffold and that pre-seeding a scaffold with ECs can increase OB infiltration into desired areas of the scaffold.
Assuntos
Transplante Ósseo/métodos , Movimento Celular , Células Endoteliais da Veia Umbilical Humana , Osteoblastos , Engenharia Tecidual/métodos , Materiais Biocompatíveis/química , Materiais Biocompatíveis/metabolismo , Regeneração Óssea , Osso e Ossos , Diferenciação Celular , Células Cultivadas , Técnicas de Cocultura/métodos , Durapatita/química , Durapatita/metabolismo , Células Endoteliais da Veia Umbilical Humana/citologia , Células Endoteliais da Veia Umbilical Humana/metabolismo , Humanos , Ácido Láctico/química , Ácido Láctico/metabolismo , Osteoblastos/citologia , Osteoblastos/metabolismo , Poliésteres , Polímeros/química , Polímeros/metabolismo , PorosidadeRESUMO
This study presents a novel design of a ceramic/polymer biphasic combination scaffold that mimics natural bone structures and is used as a bone graft substitute. To mimic the natural bone structures, the outside cortical-like shells were composed of porous hydroxyapatite (HA) with a hollow interior using a polymeric template-coating technique; the inner trabecular-like core consisted of porous poly(D,L-lactic acid) (PLA) that was loaded with dexamethasone (DEX) and was directly produced using a particle leaching/gas forming technique to create the inner diameter of the HA scaffold. It was observed that the HA and PLA parts of the fabricated HA/PLA biphasic scaffold contained open and interconnected pore structures, and the boundary between both parts was tightly connected without any gaps. It was found that the structure of the combination scaffold was analogous to that of natural bone based on micro-computed tomography analysis. Additionally, the dense, uniform apatite layer was formed on the surface of the HA/PLA biphasic scaffold through a biomimetic process, and DEX was successfully released from the PLA of the biphasic scaffold over a 1-month period. This release caused human embryonic palatal mesenchyme cells to proliferate, differentiate, produce ECM, and form tissue in vitro. Therefore, it was concluded that this functionally graded scaffold is similar to natural bone and represents a potential bone-substitute material.
Assuntos
Regeneração Óssea/efeitos dos fármacos , Substitutos Ósseos/química , Dexametasona/farmacologia , Durapatita/química , Poliésteres/química , Alicerces Teciduais/química , Materiais Biocompatíveis/química , Osso e Ossos/metabolismo , Osso e Ossos/ultraestrutura , Linhagem Celular , Dexametasona/metabolismo , Portadores de Fármacos/química , Sistemas de Liberação de Medicamentos , Glucocorticoides/metabolismo , Glucocorticoides/farmacologia , Humanos , Teste de Materiais , Osteoblastos/efeitos dos fármacos , Osteoblastos/fisiologia , Osteoblastos/ultraestrutura , Propriedades de Superfície , Engenharia Tecidual/métodos , Microtomografia por Raio-XRESUMO
Polymer-based carriers are commonly used to deliver drugs from stents. However, adverse responses to polymer coatings have raised serious concerns. This research is focused on delivering drugs from stents without using polymers or any carriers. Paclitaxel (PAT), an anti-restenotic drug, has strong adhesion towards a variety of material surfaces. In this study, we have utilized such natural adhesion property of PAT to attach these molecules directly to cobalt-chromium (Co-Cr) alloy, an ultra-thin stent strut material. Four different groups of drug coated specimens were prepared by directly adding PAT to Co-Cr alloy surfaces: Group-A (PAT coated, unheated, and ethanol cleaned); Group-B (PAT coated, heat treated, and ethanol cleaned); Group-C (PAT coated, unheated, and not ethanol cleaned); and Group-D (PAT coated, heat treated and not ethanol cleaned). In vitro drug release of these specimens was investigated using high performance liquid chromatography. Groups A and B showed sustained PAT release for up to 56 days. A simple ethanol cleaning procedure after PAT deposition can remove the loosely bound drug crystals from the alloy surfaces and thereby allowing the remaining strongly bound drug molecules to be released at a sustained rate. The heat treatment after PAT coating further improved the stability of PAT on Co-Cr alloy and allowed the drug to be delivered at a much slower rate, especially during the initial 7 days. The specimens which were not cleaned in ethanol, Groups C and D, showed burst release. PAT coated Co-Cr alloy specimens were thoroughly characterized using scanning electron microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy. These techniques were collectively useful in studying the morphology, distribution, and attachment of PAT molecules on Co-Cr alloy surfaces. Thus, this study suggests the potential for delivering paclitaxel from Co-Cr alloy surfaces without using any carriers.
Assuntos
Ligas de Cromo/química , Portadores de Fármacos/química , Paclitaxel/farmacologia , Polímeros/química , Sistemas de Liberação de Medicamentos , Microscopia de Força Atômica , Microscopia Eletrônica de Varredura , Espectroscopia Fotoeletrônica , Propriedades de Superfície/efeitos dos fármacos , Fatores de TempoRESUMO
Open fractures are common in battlefields, motor vehicle accidents, gunshot wounds, sports injuries, and high-energy falls. Such fractures are treated using hydroxyapatite (HA)-based bone graft substitutes. However, open fracture wounds are highly susceptible to bacterial infections. Hence, this study was focused on incorporating antibacterial properties to HA using silver (Ag) carrying self-assembled monolayers (SAMs). Also, the stability of Ag carrying SAMs on HA was investigated under sterilization and physiological conditions. Initially, the -COOH terminated phosphonic acid SAMs of two different chain lengths (11 carbon atoms - shorter chain and 16 carbon atoms - longer chain) were deposited on HA. Antibacterial SAMs (ASAMs) were prepared by chemically attaching Ag to shorter and longer chain SAMs coated HA. X-ray photoelectron spectroscopy, atomic force microscopy, and contact angle goniometry collectively confirmed the attachment of Ag onto SAMs coated HA. The bacterial adhesion study showed that the adherence of Staphylococcus aureus was significantly reduced on ASAMs coated HA when compared to control-HA. The stability studies showed that gas plasma, dry heat and autoclave degraded most of the ASAMs on HA. UV irradiation did not damage the shorter chain ASAMs as vigorously as other treatments, while it degraded the longer chain ASAMs completely. Ethylene oxide treatment did not degrade the longer chain ASAMs unlike all other treatments but it severely damaged the shorter chain ASAMs. Both shorter and longer chain ASAMs significantly desorbed from the HA surfaces under physiological conditions although longer chain ASAMs exhibited better stability than shorter chain ASAMs. This study demonstrated the potential for using ASAMs to provide antibacterial properties to HA and the need for developing techniques to improve stability of SAMs under sterilization and physiological conditions.
Assuntos
Antibacterianos/farmacologia , Durapatita/química , Membranas Artificiais , Aderência Bacteriana/efeitos dos fármacos , Testes de Sensibilidade Microbiana , Microscopia de Força Atômica , Microscopia Eletrônica de Varredura , Espectroscopia Fotoeletrônica , Prata/farmacologia , Staphylococcus aureus/citologia , Staphylococcus aureus/efeitos dos fármacos , Esterilização , Propriedades de Superfície/efeitos dos fármacosRESUMO
The objective of this research was to investigate the bone formation and angio-conductive potential of hydroxyapatite (HA) scaffolds closely matched to trabecular bone in a canine segmental defect after 3 and 12 weeks post implantation. Histomorphometric comparisons were made between naturally forming trabecular bone (control) and defects implanted with scaffolds fabricated with micro-size (M-HA) and nano-size HA (N-HA) ceramic surfaces. Scaffold architecture was similar to trabecular bone formed in control defects at 3 weeks. No significant differences were identified between the two HA scaffolds; however, significant bone in-growth was observed by 12 weeks with 43.9 +/- 4.1% and 50.4 +/- 8.8% of the cross-sectional area filled with mineralized bone in M-HA and N-HA scaffolds, respectively. Partially organized, lamellar collagen fibrils were identified by birefringence under cross-polarized light at both 3 and 12 weeks post implantation. Substantial blood vessel infiltration was identified in the scaffolds and compared with the distribution and diameter of vessels in the surrounding cortical bone. Vessels were less numerous but significantly larger than native cortical Haversian and Volkmann canals reflecting the scaffold architecture where open spaces allowed interconnected channels of bone to form. This study demonstrated the potential of trabecular bone modeled, highly porous and interconnected, HA scaffolds for regenerative orthopedics.
Assuntos
Osso e Ossos/efeitos dos fármacos , Osso e Ossos/patologia , Durapatita/farmacologia , Alicerces Teciduais , Cicatrização/efeitos dos fármacos , Animais , Vasos Sanguíneos/efeitos dos fármacos , Osso e Ossos/irrigação sanguínea , Calcificação Fisiológica/efeitos dos fármacos , Cães , Mandíbula/efeitos dos fármacos , Mandíbula/patologia , Teste de Materiais , Microscopia Eletrônica de Varredura , Osteogênese/efeitos dos fármacos , Microtomografia por Raio-XRESUMO
PROCEDURE: Much research is directed at surface modifications to enhance osseointegration of implants. A new potential coating is the biopolymer, chitosan, the deacetylated derivative of the natural polysaccharide, chitin. Chitosan is biocompatible, degradable, nontoxic, and exhibits osteogenic properties. The aim of this research was to investigate the hypothesis that chitosan-coated titanium supports bone formation and osseointegration. MATERIALS AND METHODS: Chitosan (1 wt% of 92.3% deacetylated chitosan in 1% acetic acid) was solution cast and bonded to rough ground titanium pins (2-mm diameterx4-mm long) via silane reactions. Calcium phosphate sputter-coated titanium and uncoated titanium pins were used as controls. Two chitosan-coated pins, and 1 each of calcium phosphate coated and uncoated pins were implanted unilaterally in the tibia of 16 adult male New Zealand white rabbits. At 2, 4, 8, and 12 weeks, undecalcified sections were histologically evaluated for healing and bone formation. RESULTS: Histological evaluations of tissues in contact with the chitosan-coated pins indicated minimal inflammatory response and a typical healing sequence of fibrous, woven bone formation, followed by development of lamellar bone. These observations were similar to those for tissues interfacing the control calcium phosphate-coated and uncoated titanium implants. Quantitative comparisons of the bone-implant interface were not possible since 31% of the implants migrated into the tibial marrow space after implantation due to insufficient cortical bone thickness to hold pins in place during healing. CONCLUSION: These data support the hypothesis that chitosan-coatings are able to develop a close bony apposition or the osseointegration of dental/craniofacial and orthopedic implants.