Status quo on identified transformation products of organic ultraviolet filters and their persistence.

Organic micropollutants of concern-including organic UV filters (UVF)-are getting increasing attention. Personal care products such as sunscreens or cosmetic articles often contain large quantities of UVF. These substances enter the environment either directly (during outdoor activities) or indirectly (via sewages from households). Therefore, the removal or degradation of UVF by natural or technical treatment processes is important to understand. UVF are often incompletely removed and transformed to side products of incomplete mineralization by abiotic and biotic processes. An extensive overview on transformation products (TPs) is essential to systematically identify knowledge gaps and to derive research needs. While there are many reviews on the UVF themselves, the number of reviews which focus on their TPs is limited. Consequently, this review gives an overview on the latest findings regarding TPs of UVF. In this publication, known TPs of UVF, which were formed during abiotic and biotic processes, are reviewed. Target substances were defined and a literature database was reviewed for studies on TPs of the target substances. The first list of studies was shortened stepwise, thus generating a final list of studies which contained only the relevant studies. Since biodegradation is one of the most important pathways for removal of organic compounds from the environment, this review presents an overview on known TPs of organic UVF and their biodegradability, which determines their environmental fate. In this way, all identified TPs of UVF were listed and checked for information on their biodegradability. A total of 2731 records of studies were assessed. Forty-two studies, which assessed 46 processes that lead to the formation of identified TPs, were included in this review. One hundred and seventyseven different TPs resulting from 11 different UVF were identified. Little to no data on the biodegradability was found for TPs. This indicates a severe lack of data on the biodegradability of TPs of organic UVF substances. Since most TPs lack information on biodegradability, further research should provide information on both-identity and biodegradability-of formed TPs to be able to assess their hazardousness for the environment.

Les micropolluants organiques préoccupants, y compris les filtres UV organiques (UVF), font l'objet d'une attention croissante. Les produits de soins personnels tels que les écrans solaires ou les articles cosmétiques contiennent souvent de grandes quantités de filtres UV. Ces substances pénètrent dans l'environnement soit directement (lors d'activités de plein air), soit indirectement (via les eaux usées ménagères). Il est donc important de comprendre l'élimination ou la dégradation des UVF par des processus de traitement naturels ou techniques. Les UVF sont souvent éliminés de manière incomplète et transformés en produits secondaires de minéralisation incomplète par des processus abiotiques et biotiques. Il est essentiel de disposer d'une vue d'ensemble des produits de transformation pour identifier systématiquement les lacunes dans les connaissances et déterminer les besoins en matière de recherche. S'il existe de nombreuses études sur les UVF eux-mêmes, le nombre d'études portant sur leurs produits de transformation est limité. Par conséquent, cette étude donne un aperçu des dernières découvertes concernant les produits de transformation des UVF. Dans cette publication, les TP connus des UVF, qui ont été formés au cours de processus abiotiques et biotiques, sont passés en revue. Des substances cibles ont été définies et une base de données bibliographiques a été examinée pour trouver des études sur les PT des substances cibles. La première liste d'études a été raccourcie progressivement, ce qui a permis d'obtenir une liste finale d'études qui ne contenait que les études pertinentes. La biodégradation étant l'une des voies les plus importantes pour l'élimination des composés organiques de l'environnement, cette étude présente une vue d'ensemble des PT connus des UVF organiques et de leur biodégradabilité, qui détermine leur devenir dans l'environnement. Ainsi, tous les PT identifiés d'UVF ont été répertoriés et des informations sur leur biodégradabilité ont été vérifiées. Au total, 2731 enregistrements d'études ont été évalués. Quarante-deux études, qui ont évalué 46 processus conduisant à la formation des polluants organiques persistants identifiés, ont été incluses dans cette analyse. Cent soixante-dix- sept TP différents résultant de 11 UVF différents ont été identifiés. Peu ou pas de données sur la biodégradabilité ont été trouvées pour les PT. Cela indique un manque important de données sur la biodégradabilité des produits finis des substances UVF organiques. Étant donné que la plupart des PT manquent d'informations sur la biodégradabilité, les recherches futures devraient fournir des informations sur l'identité et la biodégradabilité des PT formés afin de pouvoir évaluer leur dangerosité pour l'environnement.

Electrochromic Inorganic Nanostructures with High Chromaticity and Superior Brightness.

The possibility of actively controlling structural colors has recently attracted a lot of attention, in particular for new types of reflective displays (electronic paper). However, it has proven challenging to achieve good image quality in such devices, mainly because many subpixels are necessary and the semitransparent counter electrodes lower the total reflectance. Here we present an inorganic electrochromic nanostructure based on tungsten trioxide, gold, and a thin platinum mirror. The platinum reflector provides a wide color range and makes it possible to "reverse" the device design so that electrolyte and counter electrode can be placed behind the nanostructures with respect to the viewer. Importantly, this makes it possible to maintain high reflectance regardless of how the electrochemical cell is constructed. We show that our nanostructures clearly outperform the latest commercial color e-reader in terms of both color range and brightness.

Bioavailability of Antibiotics at Soil-Water Interfaces: A Comparison of Measured Activities and Equilibrium Partitioning Estimates.

There are growing concerns that antibiotic pollution impacts environmental microbiota and facilitates the propagation of antibiotic resistance. However, the prediction or analytical determination of bioavailable concentrations of antibiotics in soil is still subject to great uncertainty. Biological assays are increasingly recognized as valuable complementary tools that allow a more direct determination of the residual antibiotic activity. This study assessed the bioavailability of structurally diverse antibiotics at a soil-water interface applying activity-based analyses in conjunction with equilibrium partitioning (EqP) modeling. The activity against Gram-positive and Gram-negative bacteria of nine antibiotics from different classes was determined in the presence and absence of standard soil (LUFA St. 2.2). The addition of soil affected the activity of different antibiotics to highly varying degrees. Moreover, a highly significant correlation ( p < 0.0001) between the experimentally observed and the EqP-derived log EC50 (half-maximal effective concentration) values was observed. The innovative experimental design of this study provided new insights on the bioavailability of antibiotics at soil-water interfaces. EqP appears to be applicable to a broad range of antibiotics for the purpose of screening-level risk assessment. However, EqP estimates cannot replace soil-specific ecotoxicity testing in higher-tier assessments, since their accuracy is still compromised by a number of factors.

Fragrance allergens in household detergents.

Consumers are confronted with a large number of fragrance allergens from various sources. Until now, the discussion of exposure sources has mainly addressed cosmetic products and neglected other scented products in households. For the first time, fragrance allergens were evaluated in a complete set of detergents in households. In 131 households, we investigated the prevalence of detergents and searched their lists of ingredients for 26 fragrance allergens liable to be indicated on products according to the European Detergents Regulations. On the ingredient lists of 1447 products, these 26 fragrance substances were named almost 2000 times, most often limonene, linalool and hexyl cinnamal. Benzyl salicylate was used frequently in all-purpose cleaners. Linalool and limonene, hexyl cinnamal and butylphenyl methylpropional and citronellol and linalool co-occurred most often together in products. Fragrance allergens co-occurring together most frequently within households were eugenol, coumarin and cinnamyl alcohol. The study shows that detergents could play a relevant role for the exposure of consumers towards fragrance allergens and that they should not be underestimated as an exposure source during the exposure assessment.

Switchable Plasmonic Metasurfaces with High Chromaticity Containing Only Abundant Metals.

Plasmonic color generation offers several advantages but is also limited by the cost and availability of noble metals like gold. In this work, we present color-tunable metasurfaces with high chromaticity and reflectivity consisting of an aluminum mirror, a dielectric spacer, and a plasmonic nanohole array in copper. Copper is shown to be an excellent alternative to gold when properly protected from oxidation and makes it possible to generate a wide RGB gamut covering 27% of the standard RGB. By patterning the metasurfaces into microscale pixel triplets, color photos can be well reproduced with high resolution over wafer-sized areas. Further, we demonstrate active modulation of the reflected intensity using an electrochromic conductive polymer deposited on top of the nanostructures by screen printing. This technology opens up for ultrathin and flexible reflective displays in full color, that is, plasmonic electronic paper, compatible with large-scale sustainable production.

Biodegradation of flavonoids - Influences of structural features.

Flavonoids, a class of natural products with a variety of applications in nutrition, pharmacy and as biopesticides, could substitute more harmful synthetic chemicals that persist in the environment. To gain a better understanding of the biodegradability of flavonoids and the influence of structural features, firstly, the ultimate biodegradation of 19 flavonoids was investigated with the Closed Bottle Test according to the OECD guideline 301 D. Secondly, regarding the fast abiotic degradation reported for several flavonoids with severe concentration decrease within hours and its possible impacts on the processes behind the ultimate biodegradation, primary degradation of 4 selected flavonoids was compared at conditions representing biodegradation, abiotic degradation, and mixed substrates by monitoring the flavonoids' concentrations with HPLC-UV/vis. Our results showed that 17 out of the 19 tested flavonoids were readily biodegradable. Structural features like a hydroxy group at C3, the C2-C3 bond order, a methoxy group in the B ring, and the position of the B ring in regard to the chromene core did not affect biodegradation of the tested flavonoids. Only flavone without any hydroxy groups and morin with an uncommon 2',4' pattern of hydroxy groups were non-readily biodegradable. Monitoring the concentration of 4 selected flavonoids by HPLC-UV/vis revealed that biodegradation occurred faster than abiotic degradation at CBT conditions with no other carbon sources present. The presence of an alternative carbon source tends to increase lag phases and decrease biodegradation rates. At this condition, abiotic degradation contributed to the degradation of unstable flavonoids. Overall, as a first tier to assess the environmental fate, our results indicate low risks for persistence of most flavonoids. Thus, flavonoids could represent benign substitutes for persistent synthetic chemicals.

Analysis of environmental biodegradability of cellulose-based pharmaceutical excipients in aqueous media.

Pharmaceutical cellulosic polymers will inevitably reach natural water systems if they are not removed after entering wastewater. Biodegradation of organic chemicals in sewage or in the aquatic environment is an important removal mechanism. In this study, we investigated the environmental biodegradation of 14 cellulose derivatives commonly utilized as pharmaceutical excipients using three different test systems that are based on the closed bottle test (OECD 301D) and the manometric respirometry test (OECD 301F). For the different cellulose derivatives tested, we observed varying degrees of biodegradation ranging from 0 to 20.4 % chemical oxygen demand (COD). However, none met the criteria for classification as 'readily biodegradable'. In addition, 10 out of 14 cellulose derivatives and/or their possible transformation products formed during the experiments, may exhibit possible toxic inhibitory effects on the inoculum. This includes one or several derivatives of hydroxy propyl methyl cellulose, hydroxy propyl cellulose, methyl cellulose, ethyl cellulose, and hydroxy ethyl cellulose. Based on the results obtained, we have developed a graded classification score ('traffic light system') for excipient biodegradation. This could help streamline the assessment and classification of cellulose derivatives concerning risk of persistence and potential adverse environmental effects, thereby assisting in the prioritization of more favorable compounds. In the long term, however, excipients should be designed from the very beginning to be biodegradable and mineralizable in the environment ('benign by design').

How data on transformation products can support the redesign of sulfonamides towards better biodegradability in the environment.

Sulfonamide antibiotics (SUAs) released into the environment can affect environmental und human health, e.g., by accelerating the development and selection of antimicrobial resistant bacteria. Benign by Design (BbD) of SUAs is an effective risk prevention approach. BbD principles aim for fast and complete mineralization or at least deactivation of the SUA after release into the aquatic environment. Main objective was to test if mixtures of transformation products (TPs) generated via photolysis of SUAs can be used as an efficient way to screen for similarly effective but better biodegradable SUA alternatives. Six SUAs were photolyzed (Hg ultraviolet (UV) light), and generated UV-mixtures analysed by high performance liquid chromatography coupled to an UV and tandem mass spectrometry detector. UV-mixtures were screened for antibiotic activity (luminescence bacteria test, LBT, on luminescence and growth inhibition of Aliivibrio Fischeri) and environmental biodegradability (manometric respirometry test, MRT, OECD 301F) using untreated parent SUAs in comparison. Additionally, ready environmental biodegradability of three commercially available hydroxylated sulfanilamide derivatives was investigated. SUA-TPs contributed to acute and chronic bacterial luminescence inhibition by UV-mixtures. LBT's third endpoint, growth inhibition, was not significant for UV-mixtures. However, it cannot be excluded for tested TPs as concentrations were lower than parents' concentrations and inhibition by most parental concentrations tested was also not significant. HPLC analysis of MRT samples revealed that one third of SUA-TPs was reduced during incubation. Three of these TPs, likely OH-SIX, OH-SMX and OH-STZ, were of interest for BbD because the sulfonamide moiety is still present. However, hydroxylated sulfanilamide derivatives, tested to investigate the effect of hydroxylation on biodegradability, were not readily biodegraded. Thus, improving mineralization through hydroxylation as a general rule couldn't be confirmed, and no BbD candidate could be identified. This study fills data gaps on bioactivity and environmental biodegradability of SUAs' TP-mixtures. Findings may support new redesign approaches.

Video-Rate Switching of High-Reflectivity Hybrid Cavities Spanning All Primary Colors.

Dynamically tunable reflective structural colors are attractive for reflective displays (electronic paper). However, it is challenging to tune a thin layer of structural color across the full red-green-blue (RGB) basis set of colors at video rates and with long-term stability. In this work, this is achieved through a hybrid cavity built from metal-insulator-metal (MIM) "nanocaves" and an electrochromic polymer (PProDOTMe2 ). The reflective colors are modulated by electrochemically doping/dedoping the polymer. Compared with traditional subpixel-based systems, this hybrid structure provides high reflectivity (>40%) due to its "monopixel" nature and switches at video rates. The polymer bistability helps deliver ultralow power consumption (≈2.5 mW cm-2 ) for video display applications and negligible consumption (≈3 µW cm-2 ) for static images, compatible with fully photovoltaic powering. In addition, the color uniformity of the hybrid material is excellent (over cm-2 ) and the scalable fabrication enables large-area production.

Stable trapping of multiple proteins at physiological conditions using nanoscale chambers with macromolecular gates.

The possibility to detect and analyze single or few biological molecules is very important for understanding interactions and reaction mechanisms. Ideally, the molecules should be confined to a nanoscale volume so that the observation time by optical methods can be extended. However, it has proven difficult to develop reliable, non-invasive trapping techniques for biomolecules under physiological conditions. Here we present a platform for long-term tether-free (solution phase) trapping of proteins without exposing them to any field gradient forces. We show that a responsive polymer brush can make solid state nanopores switch between a fully open and a fully closed state with respect to proteins, while always allowing the passage of solvent, ions and small molecules. This makes it possible to trap a very high number of proteins (500-1000) inside nanoscale chambers as small as one attoliter, reaching concentrations up to 60 gL-1. Our method is fully compatible with parallelization by imaging arrays of nanochambers. Additionally, we show that enzymatic cascade reactions can be performed with multiple native enzymes under full nanoscale confinement and steady supply of reactants. This platform will greatly extend the possibilities to optically analyze interactions involving multiple proteins, such as the dynamics of oligomerization events.

Transformation products of sulfonamides in aquatic systems: Lessons learned from available environmental fate and behaviour data.

Sulfonamides (SUAs) and their transformation products (TPs) contribute to environmental pollution. Importance of research on TPs' properties has been emphasised, e.g. allowing a comprehensive environmental risk assessment of their parent compounds. However, TPs' properties have been discussed in reviews on SUAs only marginally, if at all. For the first time, a scientific literature review aims to discuss the current state of knowledge on SUA-TPs including research gaps, and commonalities of SUA-TPs and TPs in general. Literature on SUA-TPs was consulted systematically to collect data on occurrence, physicochemical properties, degradability, and (eco)toxicity. TPs of 14 SUAs were reviewed, and aspects applicable for TPs in general were identified to guide future handling of TPs as a complex category of compounds. The data of sulfamethoxazole (SMX), the main representative, was analysed in more detail to discuss insights on a chemical level. Literature search resulted in 607 SUA-TPs reported in 222 publications. Only for 4%, 31%, and 35% of these TPs, data on occurrence in aquatic systems, on degradation, and (eco)toxicity, respectively, was found. Several mixtures of SUA-TPs were more ecotoxic than their parent compounds, e.g. 10 of 15 mixtures of SMX-TPs. Only few TPs were tested as single substance. Although several TPs could be eliminated experimentally, their mineralisation rate remained often unknown. Thus, further transformation to persistent TPs could not be ruled out. Standardised biodegradability tests of individual TPs would monitor their mineralisation rate, but are almost completely lacking. Reasons are likely poor availability of TPs, but also the focus on abiotic water treatment. Data assessment demonstrated that data of high significance according to standard methods, e.g. OECD methods for chronic (eco)toxicity and ready biodegradability, is needed to assess environmental risks of prioritised TPs, but also to redesign their parent pharmaceutical for complete environmental mineralisation in a long-term (Benign by Design).

Inventory of biodegradation data of ionic liquids.

Ionic liquids (ILs) are increasingly of interest for environmentally open applications. Therefore, completely mineralising ILs are highly desirable. We reviewed the current state of knowledge on ILs' environmental biodegradability and identified research needs. Literature data were evaluated as for applied standard methods (e.g. OECD, ISO, APHA) for biodegradation of ILs in order to get an overview on the validity of the test results received and ILs' biodegradability. 109 studies were evaluated. The ILs were categorised based on the cation's core structure. The biodegradation data was classified according to a traffic light system (red: 0-19% degradation, amber: 20-59% degradation, green: ≥ 60% degradation). Not all studies could be assessed for compliance with the test guidelines due to missing test parameters. Moreover, no study discussed all validation criteria as defined by the test guidelines. Consequently, the reliability and quality of the existing biodegradation data is restrained. With regard to the different cations classified for ≥ 60% biodegradability, phosphonium ILs are the least biodegradable, followed by imidazolium ones. The most ILs that were biodegradable are cholinium ILs. The results indicate the need for more and qualitatively better testing according to standard methods including application and reporting of all validation criteria in order to get reliable data that enables the comparison of the test data and a comprehensive understanding of ILs' biodegradability. Moreover, reliable data allows the selection of sufficiently environmentally biodegradable ILs if an introduction into the environment during use cannot be excluded.

Flavonoids as biopesticides - Systematic assessment of sources, structures, activities and environmental fate.

Biopesticides obtained from renewable resources and associated with biodegradability have the potential to address resource limitations and environmental pollution, often caused by many conventional pesticides, due to the facility of natural products to run in natural nutrient cycles. Flavonoids are considered benign substitutes for pesticides, however, little comprehensive information of their pesticidal activities and critical evaluation of their associated advantages is available. Therefore, this systematic review assessed sources, structures, activities and the environmental fate of flavonoids on a basis of 201 selected publications. We identified 281 different flavonoids that were investigated for their pesticidal activity as either a pure compound or a flavonoid-containing extract, with quercetin, kaempferol, apigenin, luteolin and their glycosides as the most studied compounds. Agricultural or food waste, a potential sustainable source for flavonoids, represent 10.6% of the plant sources of flavonoids within these studies, showing the currently underutilization of these preferable feedstocks. Analysis of pesticidal activities and target organisms revealed a broad target spectrum for the class of flavonoids, including fungi, insects, plants, bacteria, algae, nematodes, molluscs and barnacles. Little information is available on the environmental fate and biodegradation of flavonoids, and a connection to studies investigating pesticidal activities is largely missing. Emerging from these findings is the need for comprehensive understanding of flavonoids pesticidal activities with emphasis on structural features that influence activity and target specificity to avoid risks for non-target organisms. Only if the target spectrum and environmental fate of a potential biopesticide are known it can serve as a benign substitute. Then, flavonoids can be integrated in a valorization process of agricultural and food waste shifting the extract-produce-consume linear chain to a more circular economy.

Ionic liquids vs. ethanol as extraction media of algicidal compounds from mango processing waste.

The race for environmentally-safe pesticides and biocides has been showing solutions ranging from pest-pathologic microorganisms to safer botanical extracts that can be incorporated in several formulations. Often linked to high biological activities, fruit residues can be recovered from food processing factories to obtain complex extracts enriched with several bioactive chemicals. Mango (Mangifera indica) fruits are processed into food products in high volumes across the globe and generate a consistent residue that contains, among others, the xanthonoid mangiferin and the flavonoid hyperoside. Both compounds have been linked to several pharmacological and pesticidal activities, although not yet studied for algicidal applications, a current concern specially for antifouling and harmful algae blooms control products. The challenge lies, however, not only on the degree of activity of the natural compounds, but also on the processes necessary to separate, isolate and formulate the bioactive compounds in order to obtain an effective final product. The solvent choice plays an important part regarding the selectivity of the separation and isolation of the main bioactive compounds from the solid waste matrix. Ethanolic mixtures in water have been consolidated recently as a promising extraction medium for flavonoids and xanthonoids, although hindered by solubility limitations. In this paper, aqueous solutions of ionic liquids (ILs) were tested, screened and optimized using Box-Behnken design and Response Surface Methodology to obtain mangiferin and hyperoside-enriched extracts. Results showed a greater concentration of mangiferin and hyperoside with 1-octyl-3-methylimidazolium chloride ([C8MIm] Cl), when compared to choline acetate and ethanolic extracts using optimized parameters. In terms of sufficiency, solvent selection between ILs and ethanolic extraction media was discussed considering economic and environmental factors. Ethanol/water mango waste extracts were then studied for their activity against Raphidocelis subcapitata microalgae, which showed a higher growth inhibition in comparison to standard solutions of mangiferin and hyperoside, either individually and in a 1:1 mixture. A EC50 value was found in relative low concentrations of mangiferin and hyperoside (0.015 mg L-1) detected in the extract, showcasing a promising approach to the direct use of residuary plant extracts in biocidal formulations.

Towards the design of organosilicon compounds for environmental degradation by using structure biodegradability relationships.

Organosilicon compounds have numerous applications in consumer products. After entering the environment most of them are resistant against microbial degradation and they persist in the environment. Accordingly, they are ubiquitously present in the environment. Therefore, better environmentally degradable organosilicon compounds are urgently needed. A systematic investigation of environmental degradability of organosilicon compounds allows to derive some general design principles, which in turn would enable chemists to reduce or better avoid environmental persistence of organosilicon compounds in the environment. Therefore, in this study, all organosilicon substances registered in the European Chemicals Agency (ECHA) database were evaluated for their environmental biodegradability. Results of own experiments with different organosilicon substances were added to extend the data basis. A dataset was generated. An assessment of all data was done and invalid data were excluded. The remaining 182 substances were grouped regarding their structure to derive general rules for the environmental biodegradability of organosilicon compounds. Non-biodegradable at all were for example cyclic, linear and branched siloxanes. Groups like ethers, esters, oximes, amines, and amides were prone to hydrolysis, which can result in readily biodegradable intermediates if they do not contain silicon functional groups anymore. This knowledge could be used for the design of better degradable organosilicon compounds as non-degradable substances should be avoided if they enter the environment after their usage.

Dynamically Tuneable Reflective Structural Coloration with Electroactive Conducting Polymer Nanocavities.

Dynamic control of structural colors across the visible spectrum with high brightness has proven to be a difficult challenge. Here, this is addressed with a tuneable reflective nano-optical cavity that uses an electroactive conducting polymer (poly(thieno[3,4-b]thiophene)) as spacer layer. Electrochemical doping and dedoping of the polymer spacer layer provides reversible tuning of the cavity's structural color throughout the entire visible range and beyond. Furthermore, the cavity provides high peak reflectance that varies only slightly between the reduced and oxidized states of the polymer. The results indicate that the polymer undergoes large reversible thickness changes upon redox tuning, aided by changes in optical properties and low visible absorption. The electroactive cavity concept may find particular use in reflective displays, by opening for tuneable monopixels that eliminate limitations in brightness of traditional subpixel-based systems.

Video Speed Switching of Plasmonic Structural Colors with High Contrast and Superior Lifetime.

Reflective displays or "electronic paper" technologies provide a solution to the high energy consumption of emissive displays by simply utilizing ambient light. However, it has proven challenging to develop electronic paper with competitive image quality and video speed capabilities. Here, the first technology that provides video speed switching of structural colors with high contrast over the whole visible is shown. Importantly, this is achieved with a broadband-absorbing polarization-insensitive electrochromic polymer instead of liquid crystals, which makes it possible to maintain high reflectivity. It is shown that promoting electrophoretic ion transport (drift motion) improves the switch speed. In combination with new nanostructures that have high surface curvature, this enables video speed switching (20 ms) at high contrast (50% reflectivity change). A detailed analysis of the optical signal during switching shows that the polaron formation starts to obey first order reaction kinetics in the video speed regime. Additionally, the system still operates at ultralow power consumption during video speed switching (<1 mW cm-2 ) and has negligible power consumption (<1 µW cm-2 ) in bistability mode. Finally, the fast switching increases device lifetime to at least 107 cycles, an order of magnitude more than state-of-the-art.

Urban storm water infiltration systems are not reliable sinks for biocides: evidence from column experiments.

Groundwater quality in urban catchments is endangered by the input of biocides, such as those used in facade paints to suppress algae and fungal growth and washed off by heavy rainfall. Their retention in storm water infiltration systems (SIS) depends, in addition to their molecular properties, on chemical properties and structure of the integrated soil layer. These soil properties change over time and thus possibly also the relevance of preferential flow paths, e.g. due to ongoing biological activity. To investigate the mobility of biocides in SIS, we analyzed the breakthrough of differently adsorbing tracers (bromide, uranine, sulforhodamine B) and commonly used biocides (diuron, terbutryn, octhilinone) in laboratory column experiments of undisturbed soil cores of SIS, covering ages from 3 to 18 years. Despite similar soil texture and chemical soil properties, retention of tracers and biocides differed distinctly between SIS. Tracer and biocide breakthrough ranged from 54% and 5%, to 96% and 54%, respectively. We related the reduced solute retention to preferential transport in macropores as could be confirmed by brilliant blue staining. Our results suggest an increasing risk of groundwater pollution with increasing number of macropores related to biological activity and the age of SIS.

Experimental and in silico assessment of fate and effects of the UV filter 2-phenylbenzimidazole 5-sulfonic acid and its phototransformation products in aquatic solutions.

Often ingredients of personal care products are present in treated wastewaters, e. g grey water (GW), and are discharged into aquatic systems. Conventional treatment of GW does not fully eliminate micropollutants such as the UV filter substance 2-phenylbenzimidazole-5-sulfonic acid (PBSA). Photolysis has been proposed as an alternative treatment method for other micropollutants, but it is not clear yet whether it can also be used to eliminate PBSA. One goal of this study was to better understand the basic pathways involved in this process. It aimed to identify photo-transformation products (PTPs) by using, in the test conditions, an initial concentration of PBSA higher than those expected in the environment. The photolysis experiments were carried out using Xenon and UV lamps. Under Xenon irradiation only slight primary elimination was found. UV irradiation resulted in almost complete primary elimination of PBSA but not in full mineralization. Four isomeric mono-hydroxylated PTPs were identified by high resolution mass spectrometry (HRMS) which could be confirmed by other studies. A modified luminescent bacteria test (LBT) with Vibrio fischeri was employed to assess acute and chronic toxic effects of the irradiated photolytic mixtures. A strong correlation was found between the kinetics of two of the PTPs and luminescence inhibition indicating bacterial toxicity. Using a set of in silico quantitative structure-activity relationship (QSAR) models, this study also offered new insights concerning the environmental fate and toxicity of the TPs of PBSA as the TPs generated by UV-treatment are more persistent and partly more toxic than PBSA.

A strategy for an initial assessment of the ecotoxicological effects of transformation products of pesticides in aquatic systems following a tiered approach.

In order to conduct a fast and comprehensive toxicity screening of pesticide transformation products (TPs), this study used a tiered approach by a combination of in silico and experimental methods to determine the probability to be of relevance for risk assessment. The six pesticides Boscalid, Penconazole, Diuron, Terbutryn, Octhilinone (OIT), and Mecoprop were used as model compounds. Identification of corresponding environmental known and unknown TPs were done by literature analysis and photolysis experiments in combination. Aquatic solutions of the pesticides were photolysed to generate TPs which can be expected in the aquatic environment. The resulting mixtures were screened for TPs by high resolution LC-MS/MS. The herein developed approach was conducted at three different tiers: Literature review and in silico methods were used to predict exemplary the environmental bacterial toxicity and the genotoxicity of every single TP at tier I. In case of indications to be toxic, experiments at tier II were applied. Hereby, the photolytic mixtures containing parent compound and TPs were used for the consecutive toxicity test. Microtox assay for the parent compounds and the photolytic mixture was conducted to determine the acute and chronic toxicity and the growth inhibition of V. fischeri. Umu-tests were conducted to determine primary DNA damage. At tier III, single substance standards were used to conduct toxicity tests in case of toxic indication by previous tiers and availability of analytical standard. Identification of TPs revealed 45 known environmental TPs that originated from the six pesticides. The number of substances that need to be assessed was therefore more than sevenfold. By the tiered approach, it was possible to assess toxicological effects on environmental bacteria of 94% of the selected TPs. For 20% we found strong evidence to be toxic to environmental bacteria, as they were assessed at least at two tiers. For further 44% of the TPs we found slight evidence, as they could be assessed at one tier. Contrary, this approach turned out to be unsuitable to assess genotoxic effects of TPs neither by in silico tools nor by experiments. The number of substances that could probably pose a risk onto environment was quadrupled in comparison to the consideration of solely the parent compounds. Thus, this study demonstrates that the conducted screening approach allows for easy and fast identification of environmental relevant TPs. However, the study presented was a very first screening. Its applicability domain needs to be assessed further. For this purpose as a very next step the approach suggested here should be verified by applying additional endpoints and including additional parent compounds.