Composition and size dependence of hydrogen interaction with carbon supported bulk-immiscible Pd-Rh nanoalloys.

In-depth clarification of hydrogen interaction with noble metal nanoparticles and nanoalloys is essential for further development and design of efficient catalysts and hydrogen storage nanomaterials. This issue becomes even more challenging for nanoalloys of bulk-immiscible metals. The hydrogen interaction with bulk-immiscible Pd-Rh nanoalloys (3-6 nm) supported on mesoporous carbon is studied by both laboratory and large scale facility techniques. X-ray diffraction (XRD) reveals a single phase fcc structure for all nanoparticles confirming the formation of nanoalloys in the whole composition range. In situ extended x-ray absorption fine structure (EXAFS) experiments suggest segregated local structures into Pd-rich surface and Rh-rich core coexisting within the nanoparticles. Hydrogen sorption can be tuned by chemical composition: Pd-rich nanoparticles form a hydride phase, whereas Rh-rich phases do not absorb hydrogen under ambient temperature and pressure conditions. The thermodynamics of hydride formation can be tailored by the composition without affecting hydrogen capacity at full hydrogenation. Furthermore, for hydrogen absorbing nanoalloys, in situ EXAFS reveals a preferential occupation of hydrogen for the interstitial sites around Pd atoms. To our knowledge, this is the first study providing insights into the hydrogen interaction mechanism with Pd-Rh nanoalloys that can guide the design of catalysts for hydrogenation reactions and the development of nanomaterials for hydrogen storage.

First Evidence of Rh Nano-Hydride Formation at Low Pressure.

Rh-based nanoparticles supported on a porous carbon host were prepared with tunable average sizes ranging from 1.3 to 3.0 nm. Depending on the vacuum or hydrogen environment during thermal treatment, either Rh metal or hydride is formed at nanoscale, respectively. In contrast to bulk Rh that can form a hydride phase under 4 GPa pressure, the metallic Rh nanoparticles (∼2.3 nm) absorb hydrogen and form a hydride phase at pressure below 0.1 MPa, as evidenced by the presence of a plateau pressure in the pressure-composition isotherm curves at room temperature. Larger metal nanoparticles (∼3.0 nm) form only a solid solution with hydrogen under similar conditions. This suggests a nanoscale effect that drastically changes the Rh-H thermodynamics. The nanosized Rh hydride phase is stable at room temperature and only desorbs hydrogen above 175 °C. Within the present hydride particle size range (1.3-2.3 nm), the hydrogen desorption is size-dependent, as proven by different thermal analysis techniques.

Optimization of the synthesis of Pd-Au nanoalloys confined in mesoporous carbonaceous materials.

Pd-Au nanoalloys confined in mesoporous carbonaceous materials were synthesized by a rapid one-pot microwave assisted approach. Green polymer resins based on phloroglucinol/glyoxylic acid or glyoxal were co-assembled in the presence of a template and metallic salts followed by microwave treatment between 40 and 80°C and subsequent thermal annealing, allowing simultaneous formation of mesoporous carbonaceous materials with in-situ confined Pd-Au nanoparticles. Several Pd-Au compositions were prepared (PdxAu100-x, where x=90; 80; 70 and 50) and their impact on the alloy structure and particle size/distribution evaluated. For Pd90Au10, homogeneously dispersed nanoalloy particles (∼8nm) are obtained in the carbonaceous framework. The increase in the Au content in the alloy gradually induces an increase in the particle size and agglomeration of the particles along with the formation of multiphased alloys, i.e., segregated Pd- and Au-rich nanoparticles. The particle agglomeration was avoided by decreasing the thermal annealing time. The homogeneity of the alloy structure was found to strongly depend by two parameters, the chelating/cross-linker agents and the microwave temperature, i.e., the chelating/cross-linker agents containing carboxylic groups and the higher temperatures inducing more heterogeneous structures. The hydrogen absorption in Pd90Au10 particles with different homogeneity degree was studied at room temperature up to 1bar. Generally, hydrogen absorbs in Pd-rich nanoalloys forming a hydride phase whereas Au-rich phases do not absorb hydrogen under the present conditions.

Metal hydrides: an innovative and challenging conversion reaction anode for lithium-ion batteries.

The state of the art of conversion reactions of metal hydrides (MH) with lithium is presented and discussed in this review with regard to the use of these hydrides as anode materials for lithium-ion batteries. A focus on the gravimetric and volumetric storage capacities for different examples from binary, ternary and complex hydrides is presented, with a comparison between thermodynamic prediction and experimental results. MgH2 constitutes one of the most attractive metal hydrides with a reversible capacity of 1480 mA·h·g(-1) at a suitable potential (0.5 V vs Li(+)/Li(0)) and the lowest electrode polarization (<0.2 V) for conversion materials. Conversion process reaction mechanisms with lithium are subsequently detailed for MgH2, TiH2, complex hydrides Mg2MH x and other Mg-based hydrides. The reversible conversion reaction mechanism of MgH2, which is lithium-controlled, can be extended to others hydrides as: MH x + xLi(+) + xe(-) in equilibrium with M + xLiH. Other reaction paths-involving solid solutions, metastable distorted phases, and phases with low hydrogen content-were recently reported for TiH2 and Mg2FeH6, Mg2CoH5 and Mg2NiH4. The importance of fundamental aspects to overcome technological difficulties is discussed with a focus on conversion reaction limitations in the case of MgH2. The influence of MgH2 particle size, mechanical grinding, hydrogen sorption cycles, grinding with carbon, reactive milling under hydrogen, and metal and catalyst addition to the MgH2/carbon composite on kinetics improvement and reversibility is presented. Drastic technological improvement in order to the enhance conversion process efficiencies is needed for practical applications. The main goals are minimizing the impact of electrode volume variation during lithium extraction and overcoming the poor electronic conductivity of LiH. To use polymer binders to improve the cycle life of the hydride-based electrode and to synthesize nanoscale composite hydride can be helpful to address these drawbacks. The development of high-capacity hydride anodes should be inspired by the emergent nano-research prospects which share the knowledge of both hydrogen-storage and lithium-anode communities.

Hydrogen sorption properties of Pd-Co nanoalloys embedded into mesoporous carbons.

Pd90Co10 and Pd75Co25 nanoalloys embedded into mesoporous carbon hosts have been prepared by two synthetic methods: direct and indirect. The average nanoparticles size can be tuned by both the temperature during thermal treatment and the chemical composition: the higher the treatment temperature and the richer the Pd composition, the larger the nanoparticle size. Twofold size- and composition-dependence of the hydrogen sorption properties at room temperature are evidenced. The Co substitution in Pd nanoalloys increases the equilibrium pressure at room temperature relative to nanosized Pd. The hydrogen sorption capacity decreases by Co substitution in Pd, as also demonstrated by SQS + DFT calculations.

Bottom-up preparation of MgH2 nanoparticles with enhanced cycle life stability during electrochemical conversion in Li-ion batteries.

A promising anode material for Li-ion batteries based on MgH2 with around 5 nm average particles size was synthesized by a bottom-up method. A series of several composites containing MgH2 nanoparticles well dispersed into a porous carbon host has been prepared with different metal content up to 70 wt%. A narrow particle size distribution (1-10 nm) of the MgH2 nanospecies with around 5.5 nm average size can be controlled up to 50 wt% Mg. After a ball milling treatment under Ar, the composite containing 50 wt% Mg shows an impressive cycle life stability with a good electrochemical capacity of around 500 mA h g(-1). Moreover, the nanoparticles' size distribution is stable during cycling.