Reaction-induced morphological transitions in a blend of diblock copolymers and reactive monomers: dissipative particle dynamics simulation.

The dissipative particle dynamics (DPD) method is applied to the morphological transitions of microphase-separated domains in a mixture of symmetric AB-diblock copolymers and reactive C-monomers, where polymerization and cross-linking reactions take place among C-monomers. The initial structure for the DPD simulation is an equilibrated cylindrical domain structure prepared by the density-biased Monte Carlo method with density profiles obtained from the self-consistent field theory. By introducing a cross-linking reaction among reactive C-monomers, we confirmed that the DPD simulation reproduces the morphological transitions observed in experiments, where the domain morphology changes due to segregation between A-blocks of diblock copolymers and cross-linking networks of C-monomers. When the cross-linking reaction of C-monomers is sufficiently fast compared to the deformation of the domains, the initial cylindrical domains are preserved, while the distance between the domains increases. On the other hand, when the formation of the cross-linking network is slow, the domains can deform and reconnect with each other in the developing cross-linking network. In this case, we observe morphological transitions from the initial domain morphology with a large-curvature interface to another domain morphology with a smaller-curvature interface, such as the transition from the cylindrical phase to the lamellar phase. We calculated the spatial correlations in the microphase-separated domains and found that such correlations are affected by the speed of the formation of the cross-linking network depending on whether the bridging between microphase-separated domains occurs in a nucleation and growth process or in a spinodal decomposition process.

A Molecular Dynamics Simulation for Thermal Activation Process in Covalent Bond Dissociation of a Crosslinked Thermosetting Polymer.

A novel algorithm for covalent bond dissociation is developed to accurately predict fracture behavior of thermosetting polymers via molecular dynamics simulation. This algorithm is based on the Monte Carlo method that considers the difference in local strain and bond-dissociation energies to reproduce a thermally activated process in a covalent bond dissociation. This study demonstrates the effectiveness of this algorithm in predicting the stress-strain relationship of fully crosslinked thermosetting polymers under uniaxial tensile conditions. Our results indicate that the bond-dissociation energy plays an important role in reproducing the brittle fracture behavior of a thermosetting polymer by affecting the number of covalent bonds that are dissociated simultaneously.

Onsager's variational principle for the dynamics of a vesicle in a Poiseuille flow.

We propose a systematic formulation of the migration behaviors of a vesicle in a Poiseuille flow based on Onsager's variational principle, which can be used to determine the most stable steady state. Our model is described by a combination of the phase field theory for the vesicle and the hydrodynamics for the flow field. The dynamics is governed by the bending elastic energy and the dissipation functional, the latter being composed of viscous dissipation of the flow field, dissipation of the bending energy of the vesicle, and the friction between the vesicle and the flow field. We performed a series of simulations on 2-dimensional systems by changing the bending elasticity of the membrane and observed 3 types of steady states, i.e., those with slipper shape, bullet shape, and snaking motion, and a quasi-steady state with zig-zag motion. We show that the transitions among these steady states can be quantitatively explained by evaluating the dissipation functional, which is determined by the competition between the friction on the vesicle surface and the viscous dissipation in the bulk flow.

Migration of phospholipid vesicles in response to OH(-) stimuli.

We demonstrate migration of phospholipid vesicles in response to a pH gradient. Upon simple micro-injection of a NaOH solution, the vesicles linearly moved to the tip of the micro-pipette and the migration velocity was proportional to the gradient of OH(-) concentration. Vesicle migration was characteristic of OH(-) ions and no migration was observed for monovalent salts or nonionic sucrose solutions. The migration of vesicles is quantitatively described by the surface tension gradient model where the hydrolysis of the phospholipids by NaOH solution decreases the surface tension of the vesicle. The vesicles move toward a direction where the surface energy decreases. Thus the chemical modification of lipids produces a mechanical force to drive vesicles.

Molecular Dynamics Simulation of Cumulative Microscopic Damage in a Thermosetting Polymer under Cyclic Loading.

To develop durable composite materials, it is crucial to elucidate the correlation between nanoscale damage in thermosetting resins and the degradation of their mechanical properties. This study aims to investigate this correlation by performing cyclic loading tests on the cross-linked structure of diglycidyl ether bisphenol A (DGEBA) and 4,4'-diaminodiphenyl sulfone (44-DDS) using all-atom molecular dynamics (MD) simulations. To accurately represent the nanoscale damage in MD simulations, a bond dissociation algorithm based on interatomic distance criteria is applied, and three characteristics are used to quantify the microscopic damage: stress-strain curves, entropy generation, and the formation of voids. As a result, the number of covalent bond dissociations increases with both the cyclic loading and its amplitude, resulting in higher entropy generation and void formation, causing the material to exhibit inelastic behavior. Furthermore, our findings indicate the occurrence of a microscopic degradation process in the cross-linked polymer: Initially, covalent bonds align with the direction of the applied load. Subsequently, tensioned covalent bonds sequentially break, resulting in significant void formation. Consequently, the stress-strain curves exhibit nonlinear and inelastic behavior. Although our MD simulations employ straightforward criteria for covalent bond dissociation, they unveil a distinct correlation between the number of bond dissociations and microscale damage. Enhancing the algorithm holds promise for yielding more precise predictions of material degradation processes.

Evaluation of True Bonding Strength for Adhesive Bonded Carbon Fiber-Reinforced Plastics.

Carbon fiber-reinforced thermoplastics (CFRTPs) have attracted attention in aerospace because of their superior specific strength and stiffness. It can be assembled by adhesive bonding; however, the existing evaluation of bonding strength is inadequate. For example, in a single-lap shear test, the weld zone fails in a combined stress state because of the bending moment. Therefore, the strength obtained experimentally is only the apparent strength. The true bonding strength was obtained via numerical analysis by outputting the local stress state at the initiation point of failure. In this study, the apparent and true bonding strengths were compared with respect to three types of strength evaluation tests to comprehensively evaluate bonding strength. Consequently, the single-lap shear test underestimates the apparent bonding strength by less than 14% of the true bonding strength. This indicates that care should be taken when determining the adhesion properties for use in numerical analyses based on experimental results. We also discussed the thickness dependence of the adhesive on the stress state and found that the developed shear test by compression reduced the discrepancy between apparent and true strength compared with the single-lap shear test and reduced the thickness dependence compared with the flatwise tensile test.

A Possibility for Quantitative Detection of Mechanically-Induced Invisible Damage by Thermal Property Measurement via Entropy Generation for a Polymer Material.

Entropy generation from a mechanical and thermal perspective are quantitatively compared via molecular dynamic (MD) simulations and mechanical and thermal experiments. The entropy generation values regarding mechanical tensile loading-which causes invisible damage-of the Polyamide 6 (PA6) material are discussed in this study. The entropy values measured mechanically and thermally in the MD simulation were similar. To verify this consistency, mechanical and thermal experiments for measuring entropy generation were conducted. The experimentally obtained mechanical entropy was slightly less than that calculated by MD simulation. The thermal capacity is estimated based on the specific heat capacity measured by differential scanning calorimetry (DSC), applying the assumed extrapolation methods. The estimated entropy generation was higher than the aforementioned values. There is a possibility that the entropy-estimating method used in this study was inappropriate, resulting in overestimations. In any case, it is verified that entropy increases with mechanical loading and material invisible damage can be qualitatively detected via thermal property measurements.

Evaluation of Microscopic Damage of PEEK Polymers under Cyclic Loadings Using Molecular Dynamics Simulations.

Full-atomic molecular dynamics simulations were conducted to investigate the time evolution of microscopic damage in polyetheretherketone (PEEK) polymers under cyclic loading conditions. Three characteristics were used to quantify microscopic damage: entropy, distribution of the end-to-end distance of polymers, and the volume fraction of voids. Our results show that the degree of disentanglement of polymers and the volume fraction of voids increase with cyclic loading, which may lead to entropy generation. Uniaxial tensile strength simulations of the polymer system before and after cyclic loading were performed. The tensile strength after cyclic loading was lower than that before loading. Furthermore, two systems with the same entropy and different loading histories showed almost the same strength. These results imply that entropy generation is expressed as the total microscopic damage and can potentially be employed for effective evaluation of the degradation of material characteristics.

Effect of Electrostatic Interactions on the Interfacial Energy between Thermoplastic Polymers and Graphene Oxide: A Molecular Dynamics Study.

In this study, the atomistic-scale mechanisms affecting the interfacial stability of a thermoplastic polymer/graphene oxide interface are investigated using molecular dynamics simulations. Different combinations of thermoplastic polymers (polyethersulfone (PES) and polyetherimide (PEI)) and graphene oxides modified with -O-, -OH, and -COOH are prepared. PES is found to be more strongly stabilized with modified/functionalized graphene oxide in the order of -COOH, -OH, -O-, which is opposite to the stability order of PEI. Our results suggest that these orders of stability are governed by a balance between the following two factors resulting from electrostatic interactions: (1) atoms with a strong charge bias attract each other, thereby stabilizing the interface; (2) the excluded-volume effect of the functional groups on graphene oxide destabilizes the interface by preventing π-π stacking of aromatic rings.