RESUMO
Peri-implantitis can cause marginal bone remodeling around implants. The aim is to develop an automatic image processing approach based on two artificial intelligence (AI) techniques in intraoral (periapical and bitewing) radiographs to assist dentists in determining bone loss. The first is a deep learning (DL) object-detector (YOLOv3) to roughly identify (no exact localization is required) two objects: prosthesis (crown) and implant (screw). The second is an image understanding-based (IU) process to fine-tune lines on screw edges and to identify significant points (intensity bone changes, intersections between screw and crown). Distances between these points are used to compute bone loss. A total of 2920 radiographs were used for training (50%) and testing (50%) the DL process. The mAP@0.5 metric is used for performance evaluation of DL considering periapical/bitewing and screws/crowns in upper and lower jaws, with scores ranging from 0.537 to 0.898 (sufficient because DL only needs an approximation). The IU performance is assessed with 50% of the testing radiographs through the t test statistical method, obtaining p values of 0.0106 (line fitting) and 0.0213 (significant point detection). The IU performance is satisfactory, as these values are in accordance with the statistical average/standard deviation in pixels for line fitting (2.75/1.01) and for significant point detection (2.63/1.28) according to the expert criteria of dentists, who establish the ground-truth lines and significant points. In conclusion, AI methods have good prospects for automatic bone loss detection in intraoral radiographs to assist dental specialists in diagnosing peri-implantitis.
Assuntos
Perda do Osso Alveolar , Peri-Implantite , Dente , Humanos , Inteligência Artificial , Próteses e ImplantesRESUMO
OBJECTIVE: Apathy is one of the most frequent symptoms of dementia, whose underlying neurobiology is not well understood. The objective was to analyze the correlations of apathy and its dimensions with gray and white matter damage in the brain of patients with advanced Alzheimer's disease (AD). METHODS: The setting of the study was at the Alzheimer Center Reina Sofía Foundation Research Unit. Participants include 37 nursing home patients with moderate to severe AD, 78.4% were women, and mean Standard Deviation (SD) age is 82.7 (5.8). Several measurements were taken: severe mini-mental state examination and Global Deterioration Scale for cognitive and functional status, Neuropsychiatric Inventory for behavioral problems, and Apathy In Dementia-Nursing Home Version Scale for apathy, including total score and subscores of emotional blunting, deficit of thinking, and cognitive inertia. 3T magnetic resonance imaging measures (voxel-based morphometry, fluid-attenuated inversion recovery, and diffusion tensor imaging) were also conducted. RESULTS: Moderate levels of apathy (mean Apathy In Dementia-Nursing Home Version Scale: 31.1 ± 18.5) were found. Bilateral damage to the corpus callosum and internal capsule was associated with apathy severity (cluster size 2435, p < 0.0005, family-wise error [FWE]-corrected). A smaller and more anteriorly located region of the right internal capsule and corpus callosum was associated with higher emotional blunting (cluster size 334, p < 0.0005, FWE-corrected). Ischemic damage in the right periventricular frontal region was associated with higher deficit of thinking (cluster size 3805, p < 0.005, FWE-corrected). CONCLUSIONS: Brain damage related to apathy may have different features in the advanced stages of AD and differs between the three apathy dimensions. Besides atrophy, brain connectivity and vascular lesions are relevant in the study of apathy, especially in the more severe stages of dementia. Further magnetic resonance imaging studies should include multimodal techniques. Copyright © 2016 John Wiley & Sons, Ltd.
Assuntos
Doença de Alzheimer/fisiopatologia , Apatia/fisiologia , Substância Cinzenta/patologia , Substância Branca/patologia , Idoso , Idoso de 80 Anos ou mais , Atrofia/patologia , Imagem de Tensor de Difusão/métodos , Feminino , Lobo Frontal/patologia , Substância Cinzenta/diagnóstico por imagem , Humanos , Imageamento por Ressonância Magnética/métodos , Masculino , Pessoa de Meia-Idade , Substância Branca/diagnóstico por imagemRESUMO
Computer-based sensors and actuators such as global positioning systems, machine vision, and laser-based sensors have progressively been incorporated into mobile robots with the aim of configuring autonomous systems capable of shifting operator activities in agricultural tasks. However, the incorporation of many electronic systems into a robot impairs its reliability and increases its cost. Hardware minimization, as well as software minimization and ease of integration, is essential to obtain feasible robotic systems. A step forward in the application of automatic equipment in agriculture is the use of fleets of robots, in which a number of specialized robots collaborate to accomplish one or several agricultural tasks. This paper strives to develop a system architecture for both individual robots and robots working in fleets to improve reliability, decrease complexity and costs, and permit the integration of software from different developers. Several solutions are studied, from a fully distributed to a whole integrated architecture in which a central computer runs all processes. This work also studies diverse topologies for controlling fleets of robots and advances other prospective topologies. The architecture presented in this paper is being successfully applied in the RHEA fleet, which comprises three ground mobile units based on a commercial tractor chassis.
Assuntos
Agricultura/instrumentação , Algoritmos , Robótica/instrumentação , Inteligência Artificial , SoftwareRESUMO
In recent years, there have been major advances in the development of new and more powerful perception systems for agriculture, such as computer-vision and global positioning systems. Due to these advances, the automation of agricultural tasks has received an important stimulus, especially in the area of selective weed control where high precision is essential for the proper use of resources and the implementation of more efficient treatments. Such autonomous agricultural systems incorporate and integrate perception systems for acquiring information from the environment, decision-making systems for interpreting and analyzing such information, and actuation systems that are responsible for performing the agricultural operations. These systems consist of different sensors, actuators, and computers that work synchronously in a specific architecture for the intended purpose. The main contribution of this paper is the selection, arrangement, integration, and synchronization of these systems to form a whole autonomous vehicle for agricultural applications. This type of vehicle has attracted growing interest, not only for researchers but also for manufacturers and farmers. The experimental results demonstrate the success and performance of the integrated system in guidance and weed control tasks in a maize field, indicating its utility and efficiency. The whole system is sufficiently flexible for use in other agricultural tasks with little effort and is another important contribution in the field of autonomous agricultural vehicles.
Assuntos
Agricultura/instrumentação , Veículos Automotores , Produtos Agrícolas/crescimento & desenvolvimento , Tomada de Decisões , Processamento de Imagem Assistida por Computador , Plantas Daninhas/crescimento & desenvolvimento , Potenciometria , Fatores de TempoRESUMO
The remarkable performance of Convolutional Neural Networks (CNNs) has increased their use in real-time systems and devices with limited resources. Hence, compacting these networks while preserving accuracy has become necessary, leading to multiple compression methods. However, the majority require intensive iterative procedures and do not delve into the influence of the used data. To overcome these issues, this paper presents several contributions, framed in the context of explainable Artificial Intelligence (xAI): (a) two filter pruning methods for CNNs, which remove the less significant convolutional kernels; (b) a fine-tuning strategy to recover generalization; (c) a layer pruning approach for U-Net; and (d) an explanation of the relationship between performance and the used data. Filter and feature maps information are used in the pruning process: Principal Component Analysis (PCA) is combined with a next-convolution influence-metric, while the latter and the mean standard deviation are used in an importance score distribution-based method. The developed strategies are generic, and therefore applicable to different models. Experiments demonstrating their effectiveness are conducted over distinct CNNs and datasets, focusing mainly on semantic segmentation (using U-Net, DeepLabv3+, SegNet, and VGG-16 as highly representative models). Pruned U-Net on agricultural benchmarks achieves 98.7% parameters and 97.5% FLOPs drop, with a 0.35% gain in accuracy. DeepLabv3+ and SegNet on CamVid reach 46.5% and 72.4% parameters reduction and a 51.9% and 83.6% FLOPs drop respectively, with almost no decrease in accuracy. VGG-16 on CIFAR-10 obtains up to 86.5% parameter and 82.2% FLOPs decrease with a 0.78% accuracy gain.
Assuntos
Inteligência Artificial , Semântica , Redes Neurais de Computação , Algoritmos , BenchmarkingRESUMO
Grapheme-color synesthesia is a neurological phenomenon in which viewing achromatic letters/numbers leads to automatic and involuntary color experiences. In this study, voxel-based morphometry analyses were performed on T1 images and fractional anisotropy measures to examine the whole brain in associator grapheme-color synesthetes. These analyses provide new evidence of variations in emotional areas (both at the cortical and subcortical levels), findings that help understand the emotional component as a relevant aspect of the synesthetic experience. Additionally, this study replicates previous findings in the left intraparietal sulcus and, for the first time, reports the existence of anatomical differences in subcortical gray nuclei of developmental grapheme-color synesthetes, providing a link between acquired and developmental synesthesia. This empirical evidence, which goes beyond modality-specific areas, could lead to a better understanding of grapheme-color synesthesia as well as of other modalities of the phenomenon.
Assuntos
Encéfalo/fisiopatologia , Emoções/fisiologia , Transtornos da Percepção/fisiopatologia , Percepção Visual/fisiologia , Adulto , Atenção/fisiologia , Imagem de Tensor de Difusão , Feminino , Neuroimagem Funcional , Humanos , Masculino , SinestesiaRESUMO
In Precision Agriculture, images coming from camera-based sensors are commonly used for weed identification and crop line detection, either to apply specific treatments or for vehicle guidance purposes. Accuracy of identification and detection is an important issue to be addressed in image processing. There are two main types of parameters affecting the accuracy of the images, namely: (a) extrinsic, related to the sensor's positioning in the tractor; (b) intrinsic, related to the sensor specifications, such as CCD resolution, focal length or iris aperture, among others. Moreover, in agricultural applications, the uncontrolled illumination, existing in outdoor environments, is also an important factor affecting the image accuracy. This paper is exclusively focused on two main issues, always with the goal to achieve the highest image accuracy in Precision Agriculture applications, making the following two main contributions: (a) camera sensor arrangement, to adjust extrinsic parameters and (b) design of strategies for controlling the adverse illumination effects.
Assuntos
Agricultura/instrumentação , Agricultura/métodos , Produtos Agrícolas/anatomia & histologia , Processamento de Imagem Assistida por Computador , Fotografação/instrumentação , Plantas Daninhas/anatomia & histologia , AlgoritmosRESUMO
Landcover is subject to continuous changes on a wide variety of temporal and spatial scales. Those changes produce significant effects in human and natural activities. Maintaining an updated spatial database with the occurred changes allows a better monitoring of the Earth's resources and management of the environment. Change detection (CD) techniques using images from different sensors, such as satellite imagery, aerial photographs, etc., have proven to be suitable and secure data sources from which updated information can be extracted efficiently, so that changes can also be inventoried and monitored. In this paper, a multisource CD methodology for multiresolution datasets is applied. First, different change indices are processed, then different thresholding algorithms for change/no_change are applied to these indices in order to better estimate the statistical parameters of these categories, finally the indices are integrated into a change detection multisource fusion process, which allows generating a single CD result from several combination of indices. This methodology has been applied to datasets with different spectral and spatial resolution properties. Then, the obtained results are evaluated by means of a quality control analysis, as well as with complementary graphical representations. The suggested methodology has also been proved efficiently for identifying the change detection index with the higher contribution.
RESUMO
The aim of this paper is to classify the land covered with oat crops, and the quantification of frost damage on oats, while plants are still in the flowering stage. The images are taken by a digital colour camera CCD-based sensor. Unsupervised classification methods are applied because the plants present different spectral signatures, depending on two main factors: illumination and the affected state. The colour space used in this application is CIELab, based on the decomposition of the colour in three channels, because it is the closest to human colour perception. The histogram of each channel is successively split into regions by thresholding. The best threshold to be applied is automatically obtained as a combination of three thresholding strategies: (a) Otsu's method, (b) Isodata algorithm, and (c) Fuzzy thresholding. The fusion of these automatic thresholding techniques and the design of the classification strategy are some of the main findings of the paper, which allows an estimation of the damages and a prediction of the oat production.
Assuntos
Avena/fisiologia , Processamento de Imagem Assistida por Computador/métodos , Agricultura/métodos , Algoritmos , Temperatura Baixa , Cor , Percepção de Cores , Processamento Eletrônico de Dados , Monitoramento Ambiental/métodos , Desenho de Equipamento , Lógica Fuzzy , Humanos , Modelos Estatísticos , Reprodutibilidade dos Testes , TemperaturaRESUMO
This paper presents a mapping method for wide row crop fields. The resulting map shows the crop rows and weeds present in the inter-row spacing. Because field videos are acquired with a camera mounted on top of an agricultural vehicle, a method for image sequence stabilization was needed and consequently designed and developed. The proposed stabilization method uses the centers of some crop rows in the image sequence as features to be tracked, which compensates for the lateral movement (sway) of the camera and leaves the pitch unchanged. A region of interest is selected using the tracked features, and an inverse perspective technique transforms the selected region into a bird's-eye view that is centered on the image and that enables map generation. The algorithm developed has been tested on several video sequences of different fields recorded at different times and under different lighting conditions, with good initial results. Indeed, lateral displacements of up to 66% of the inter-row spacing were suppressed through the stabilization process, and crop rows in the resulting maps appear straight.
Assuntos
Produtos Agrícolas , Veículos Off-Road , Gravação em Vídeo/métodos , AlgoritmosRESUMO
We present a novel strategy for computing disparity maps from hemispherical stereo images obtained with fish-eye lenses in forest environments. At a first segmentation stage, the method identifies textures of interest to be either matched or discarded. This is achieved by applying a pattern recognition strategy based on the combination of two classifiers: Fuzzy Clustering and Bayesian. At a second stage, a stereovision matching process is performed based on the application of four stereovision matching constraints: epipolar, similarity, uniqueness and smoothness. The epipolar constraint guides the process. The similarity and uniqueness are mapped through a decision making strategy based on a weighted fuzzy similarity approach, obtaining a disparity map. This map is later filtered through the Hopfield Neural Network framework by considering the smoothness constraint. The combination of the segmentation and stereovision matching approaches makes the main contribution. The method is compared against the usage of simple features and combined similarity matching strategies.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Lentes , Árvores/anatomia & histologia , Visão Ocular , Animais , Teorema de Bayes , Análise por Conglomerados , Meio Ambiente , Peixes , Lógica Fuzzy , Redes Neurais de Computação , TermodinâmicaRESUMO
Determination of the soil coverage by crop residues after ploughing is a fundamental element of Conservation Agriculture. This paper presents the application of genetic algorithms employed during the fine tuning of the segmentation process of a digital image with the aim of automatically quantifying the residue coverage. In other words, the objective is to achieve a segmentation that would permit the discrimination of the texture of the residue so that the output of the segmentation process is a binary image in which residue zones are isolated from the rest. The RGB images used come from a sample of images in which sections of terrain were photographed with a conventional camera positioned in zenith orientation atop a tripod. The images were taken outdoors under uncontrolled lighting conditions. Up to 92% similarity was achieved between the images obtained by the segmentation process proposed in this paper and the templates made by an elaborate manual tracing process. In addition to the proposed segmentation procedure and the fine tuning procedure that was developed, a global quantification of the soil coverage by residues for the sampled area was achieved that differed by only 0.85% from the quantification obtained using template images. Moreover, the proposed method does not depend on the type of residue present in the image. The study was conducted at the experimental farm "El Encín" in Alcalá de Henares (Madrid, Spain).
Assuntos
Agricultura/métodos , Reconhecimento Automatizado de Padrão/métodos , Algoritmos , Cor , Produtos Agrícolas , Aumento da Imagem/métodos , Interpretação de Imagem Assistida por Computador/métodos , Luz , Modelos Estatísticos , Solo , EspanhaRESUMO
AIM: A new automatic method for detecting specific points and lines (straight and curves) in dental panoramic radiographies (orthopantomographies) is proposed, where the human knowledge is mapped to the automatic system. The goal is to compute relevant mandibular indices (Mandibular Cortical Width, Panoramic Mandibular Index, Mandibular Ratio, Mandibular Cortical Index) in order to detect the thinning and deterioration of the mandibular bone. Data can be stored for posterior massive analysis. METHODS: Panoramic radiographies are intrinsically complex, including: artificial structures, unclear limits in bony structures, jawbones with irregular curvatures and intensity levels, irregular shapes and borders of the mental foramen, irregular teeth alignments or missing dental pieces. An intelligent sequence of linked imaging segmentation processes is proposed to cope with the above situations towards the design of the automatic segmentation, making the following contributions: (i) Fuzzy K-means classification for identifying artificial structures; (ii) adjust a tangent line to the lower border of the lower jawbone (lower cortex), based on texture analysis, grey scale dilation, binarization and labelling; (iii) identification of the mental foramen region and its centre, based on multi-thresholding, binarization, morphological operations and labelling; (iv) tracing a perpendicular line to the tangent passing through the centre of the mental foramen region and two parallel lines to the tangent, passing through borders on the mental foramen intersected by the perpendicular; (v) following the perpendicular line, a sweep is made moving up the tangent for detecting accumulation of binary points after applying adaptive filtering; (vi) detection of the lower mandible alveolar crest line based on the identification of inter-teeth gaps by saliency and interest points feature description. RESULTS: The performance of the proposed approach was quantitatively compared against the criteria of expert dentists, verifying also its validity with statistical studies based on the analysis of deterioration of bone structures with different levels of osteoporosis. All indices are computed inside two regions of interest, which tolerate flexibility in sizes and locations, making this process robust enough. CONCLUSIONS: The proposed approach provides an automatic procedure able to process with efficiency and reliability panoramic X-Ray images for early osteoporosis detection.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Mandíbula/diagnóstico por imagem , Osteoporose/diagnóstico , Radiografia Panorâmica/métodos , Lógica Fuzzy , Humanos , Osteoporose/diagnóstico por imagem , Reconhecimento Automatizado de Padrão , Reprodutibilidade dos TestesRESUMO
The design of the control systems for sensor networks presents important challenges. Besides the traditional problems about how to process the sensor data to obtain the target information, engineers need to consider additional aspects such as the heterogeneity and high number of sensors, and the flexibility of these networks regarding topologies and the sensors in them. Although there are partial approaches for resolving these issues, their integration relies on ad hoc solutions requiring important development efforts. In order to provide an effective approach for this integration, this paper proposes an architecture based on the multi-agent system paradigm with a clear separation of concerns. The architecture considers sensors as devices used by an upper layer of manager agents. These agents are able to communicate and negotiate services to achieve the required functionality. Activities are organized according to roles related with the different aspects to integrate, mainly sensor management, data processing, communication and adaptation to changes in the available devices and their capabilities. This organization largely isolates and decouples the data management from the changing network, while encouraging reuse of solutions. The use of the architecture is facilitated by a specific modelling language developed through metamodelling. A case study concerning a generic distributed system for fire fighting illustrates the approach and the comparison with related work.
RESUMO
The increasing technology of high-resolution image airborne sensors, including those on board Unmanned Aerial Vehicles, demands automatic solutions for processing, either on-line or off-line, the huge amountds of image data sensed during the flights. The classification of natural spectral signatures in images is one potential application. The actual tendency in classification is oriented towards the combination of simple classifiers. In this paper we propose a combined strategy based on the Deterministic Simulated Annealing (DSA) framework. The simple classifiers used are the well tested supervised parametric Bayesian estimator and the Fuzzy Clustering. The DSA is an optimization approach, which minimizes an energy function. The main contribution of DSA is its ability to avoid local minima during the optimization process thanks to the annealing scheme. It outperforms simple classifiers used for the combination and some combined strategies, including a scheme based on the fuzzy cognitive maps and an optimization approach based on the Hopfield neural network paradigm.
RESUMO
This paper describes a novel feature-based stereovision matching process based on a pair of omnidirectional images in forest stands acquired with a stereovision sensor equipped with fish-eye lenses. The stereo analysis problem consists of the following steps: image acquisition, camera modelling, feature extraction, image matching and depth determination. Once the depths of significant points on the trees are obtained, the growing stock volume can be estimated by considering the geometrical camera modelling, which is the final goal. The key steps are feature extraction and image matching. This paper is devoted solely to these two steps. At a first stage a segmentation process extracts the trunks, which are the regions used as features, where each feature is identified through a set of attributes of properties useful for matching. In the second step the features are matched based on the application of the following four well known matching constraints, epipolar, similarity, ordering and uniqueness. The combination of the segmentation and matching processes for this specific kind of sensors make the main contribution of the paper. The method is tested with satisfactory results and compared against the human expert criterion.
RESUMO
Super-resolution (SR) techniques produce a high-resolution image from a set of low-resolution undersampled images. In this paper, we propose a new method for super-resolution that uses sampling theory concepts to derive a noniterative SR algorithm. We first raise the issue of the validity of the data model usually assumed in SR, pointing out that it imposes a band-limited reconstructed image plus a certain type of noise. We propose a sampling theory framework with a prefiltering step that allows us to work with more general data models and also a specific new method for SR that uses Delaunay triangulation and B-splines to build the super-resolved image. The proposed method is noniterative and well posed. We prove its effectiveness against traditional iterative and noniterative SR methods on synthetic and real data. Additionally, we also prove that we can first solve the interpolation problem and then make the deblurring not only when the motion is translational but also when there are rotations and shifts and the imaging system Point Spread Function (PSF) is rotationally symmetric.