RESUMO
Tumor necrosis factor receptor 1 (TNFR1) and Toll-like receptors (TLRs) regulate immune and inflammatory responses. Here we show that the TNFR1-associated death domain protein (TRADD) is critical in TNFR1, TLR3 and TLR4 signaling. TRADD deficiency abrogated TNF-induced apoptosis, prevented recruitment of the ubiquitin ligase TRAF2 and ubiquitination of the adaptor RIP1 in the TNFR1 signaling complex, and considerably inhibited but did not completely abolish activation of the transcription factor NF-kappaB and mitogen-activated protein kinases 'downstream' of TNFR1. TRIF-dependent cytokine production induced by the synthetic double-stranded RNA poly(I:C) and lipopolysaccharide was lower in TRADD-deficient mice than in wild-type mice. Moreover, TRADD deficiency inhibited poly(I:C)-mediated RIP1 ubiquitination and activation of NF-kappaB and mitogen-activated protein kinase signaling in fibroblasts but not in bone marrow macrophages. Thus, TRADD is an essential component of TNFR1 signaling and has a critical but apparently cell type-specific function in TRIF-dependent TLR responses.
Assuntos
Transdução de Sinais , Proteína de Domínio de Morte Associada a Receptor de TNF/deficiência , Fator 1 Associado a Receptor de TNF/metabolismo , Peptídeos e Proteínas Associados a Receptores de Fatores de Necrose Tumoral/fisiologia , Animais , Camundongos , Proteínas Quinases Ativadas por Mitógeno/metabolismo , NF-kappa B/metabolismo , Transdução de Sinais/efeitos dos fármacos , Proteína de Domínio de Morte Associada a Receptor de TNF/metabolismo , Peptídeos e Proteínas Associados a Receptores de Fatores de Necrose Tumoral/genética , Ubiquitina/metabolismoRESUMO
The trabecular extracellular matrix (ECM) forms a three-dimensional scaffold to stabilize the bone marrow, provide substrates for cell-matrix interactions and retain, present or release signals to modulate hematopoietic stem and progenitor cell development. However, the impact of trabecular ECM components on hematopoiesis has been poorly studied. Using collagen IX alpha1 - deficient (Col9a1(-/-) ) mice, we revealed that a lack of collagen IX alpha1 results in a disorganized trabecular network enriched in fibronectin, and in a reduction in myeloid cells, which was accompanied by a decrease in colony-stimulating factor 1 receptor expression on monocytes from the bone marrow. In contrast, B-cell numbers in the bone marrow and T-cell numbers in the thymus remained unchanged. Alterations in the bone marrow microenvironment may not only reduce myeloid cell numbers, but also have long-term implications for myeloid cell function. Mice were infected with Listeria moncytogenes to analyze the function of myeloid cells. In this case, an inadequate macrophage-dependent clearance of bacterial infections was observed in Col9a1(-/-) mice in vivo. This was mainly caused by an impaired interferon-gamma/tumor necrosis factor-alpha-mediated activation of macrophages. The loss of collagen IX alpha1 therefore destabilizes the trabecular bone network, impairs myeloid cell differentiation, and affects the innate immune response against Listeria. Stem Cells 2018;36:1752-1763.
Assuntos
Colágeno/metabolismo , Células Mieloides/metabolismo , Animais , Modelos Animais de Doenças , Feminino , Citometria de Fluxo , Humanos , CamundongosRESUMO
As part of the risk assessment (RA) requirements for genetically modified (GM) plants, according to Regulation (EU) No 503/2013 and the EFSA guidance on the RA of food and feed from GM plants (EFSA GMO Panel 2011), applicants need to perform a molecular characterisation of the DNA sequences inserted in the GM plant genome. This Technical Note to the applicants puts together requirements and recommendations for the quality assessment of the methodology, analysis and reporting when DNA sequencing is used for the molecular characterisation of GM plants. In particular, it applies to the use of Sanger sequencing and next-generation sequencing for the characterisation of the inserted genetic material and its flanking regions at each insertion site, the determination of the copy number of all detectable inserts and the analysis of the genetic stability of the inserts. This updated document replaces the EFSA 2018 Technical Note and reflects the current knowledge in scientific-technical methods for generating and verifying, in a standardised manner, DNA sequencing data in the context of RA of GM plants. It does not take into consideration the verification and validation of the detection method which remains under the remit of the Joint Research Centre (JRC).
RESUMO
EFSA was asked by the European Parliament to provide a scientific opinion on the analysis by the French Agency for Food, Environmental and Occupational Health & Safety (ANSES) of Annex I of the European Commission proposal for a regulation 'on plants obtained by certain new genomic techniques (NGTs) and their food and feed, and amending regulation (EU) 2017/625'. The Panel on genetically modified organisms (GMO) assessed the opinion published by ANSES, which focuses on (i) the need to clarify the definitions and scope, (ii) the scientific basis for the equivalence criteria and (iii) the need to take potential risks from category 1 NGT plants into account. The EFSA GMO Panel considered the ANSES analysis and comments on various terms used in the criteria in Annex I of the European Commission proposal and discussed definitions based on previous EFSA GMO Panel opinions. The EFSA GMO Panel concluded that the available scientific literature shows that plants containing the types and numbers of genetic modifications used as criteria to identify category 1 NGT plants in the European Commission proposal do exist as the result of spontaneous mutations or random mutagenesis. Therefore, it is scientifically justified to consider category 1 NGT plants as equivalent to conventionally bred plants with respect to the similarity of genetic modifications and the similarity of potential risks. The EFSA GMO Panel did not identify any additional hazards and risks associated with the use of NGTs compared to conventional breeding techniques in its previous Opinions.
RESUMO
Genetically modified maize DP202216 was developed to confer tolerance to glufosinate-ammonium-containing herbicides and to provide an opportunity for yield enhancement under field conditions. These properties were achieved by introducing the mo-pat and zmm28 expression cassettes. The molecular characterisation data and bioinformatic analyses do not identify issues requiring food/feed safety assessment. None of the identified differences in the agronomic/phenotypic and compositional characteristics tested between maize DP202216 and its comparator needs further assessment, except for the levels of stearic acid (C18:0), which do not raise nutritional and safety concerns. The GMO Panel does not identify safety concerns regarding the toxicity and allergenicity of the PAT and ZMM28 proteins as expressed in maize DP202216, and finds no evidence that the genetic modification would change the overall allergenicity of maize DP202216. In the context of this application, the consumption of food and feed from maize DP202216 does not represent a nutritional concern in humans and animals. The GMO Panel concludes that maize DP202216 is as safe as the comparator and non-GM reference varieties tested, and no post-market monitoring of food/feed is considered necessary. In the case of accidental release of viable maize DP202216 grains into the environment, this would not raise environmental safety concerns. The post-market environmental monitoring plan and reporting intervals are in line with the intended uses of maize DP202216. The GMO Panel concludes that maize DP202216 is as safe as its comparator and the tested non-GM reference varieties with respect to potential effects on human and animal health and the environment.
RESUMO
Genetically modified maize DP915635 was developed to confer tolerance to glufosinate herbicide and resistance to corn rootworm pests. These properties were achieved by introducing the ipd079Ea, mo-pat and pmi expression cassettes. The molecular characterisation data and bioinformatic analyses do not identify issues requiring food/feed safety assessment. None of the identified differences in the agronomic/phenotypic and compositional characteristics tested between maize DP915635 and its conventional counterpart needs further assessment, except for the levels of crude protein in forage, which does not raise nutritional and safety concerns. The GMO Panel does not identify safety concerns regarding the toxicity and allergenicity of the IPD079Ea, PAT and PMI proteins expressed in maize DP915635. The GMO Panel finds no evidence that the genetic modification impacts the overall safety of maize DP915635. In the context of this application, the consumption of food and feed from maize DP915635 does not represent a nutritional concern in humans and animals. The GMO Panel concludes that maize DP915635 is as safe as the conventional counterpart and non-GM maize varieties tested, and no post-market monitoring of food/feed is considered necessary. In the case of accidental release of viable maize DP915635 grains into the environment, this would not raise environmental safety concerns. The post market environmental monitoring plan and reporting intervals are in line with the intended uses of maize DP915635. The GMO Panel concludes that maize DP915635 is as safe as its conventional counterpart and the tested non-GM maize varieties with respect to potential effects on human and animal health and the environment.
RESUMO
Genetically modified maize DP23211 was developed to confer control of certain coleopteran pests and tolerance to glufosinate-containing herbicide. These properties were achieved by introducing the pmi, mo-pat, ipd072Aa and DvSSJ1 expression cassettes. The molecular characterisation data and bioinformatic analyses do not identify issues requiring food/feed safety assessment. None of the identified differences in the agronomic/phenotypic and compositional characteristics tested between maize DP23211 and its conventional counterpart needs further assessment, except for those in levels of histidine, phenylalanine, magnesium, phosphorus and folic acid in grain, which do not raise safety and nutritional concerns. The GMO Panel does not identify safety concerns regarding the toxicity and allergenicity of the IPD072Aa, PAT and PMI proteins and the DvSSJ1 dsRNA and derived siRNAs newly expressed in maize DP23211, and finds no evidence that the genetic modification impacts the overall safety of maize DP23211. In the context of this application, the consumption of food and feed from maize DP23211 does not represent a nutritional concern in humans and animals. Therefore, no post-market monitoring of food/feed is considered necessary. In the case of accidental release of viable maize DP23211 grains into the environment, this would not raise environmental safety concerns. The post-market environmental monitoring plan and reporting intervals are in line with the intended uses of maize DP23211. The GMO Panel concludes that maize DP23211 is as safe as its conventional counterpart and the tested non-GM reference varieties with respect to potential effects on human and animal health and the environment.
RESUMO
The European Commission requested the Panel on Genetically Modified Organisms of the European Food Safety Authority (EFSA GMO Panel) to assess new scientific information on maize MIR162, and to indicate whether the previous conclusions on the safety of maize MIR162 as a single event and as a part of stacked events remain valid. The new information is included in a European patent that reports a decrease in male fertility in some MIR162 inbred lines, pointing to a potential link between such decrease and the Vip3 protein expressed by maize MIR162. The EFSA GMO Panel evaluated the data provided by the patent owner and found scarce support for a causal link between Vip3 and decreased fertility. The general hypothesis of an association between event MIR162 and altered fertility could not be confirmed. The EFSA GMO Panel conducted the safety assessment based on the conservative assumption that such an association exists. The EFSA GMO Panel concluded that a decrease in male fertility would have no impact on the previous conclusions on maize MIR162 and stacked events containing MIR162.
RESUMO
Genetically modified maize MON 87419 was developed to confer tolerance to dicamba- and glufosinate-based herbicides. These properties were achieved by introducing the dmo and pat expression cassettes. The molecular characterisation data and bioinformatic analyses do not identify issues requiring food/feed safety assessment. None of the identified differences in the agronomic/phenotypic and compositional characteristics tested between maize MON 87419 and its conventional counterpart needed further assessment, except for the levels of arginine and protein in grains which did not raise safety and nutritional concerns. The GMO Panel does not identify safety concerns regarding the toxicity and allergenicity of the dicamba mono-oxygenase (DMO) and phosphinothricin N-acetyltransferase (PAT) proteins as expressed in maize MON 87419. The GMO Panel finds no evidence that the genetic modification impacts the overall safety of maize MON 87419. In the context of this application, the consumption of food and feed from maize MON 87419 does not represent a nutritional concern in humans and animals. The GMO Panel concludes that maize MON 87419 is as safe as the conventional counterpart and non-GM maize varieties tested, and no post-market monitoring of food/feed is considered necessary. In the case of accidental release of viable maize MON 87419 grains into the environment, this would not raise environmental safety concerns. The post-market environmental monitoring plan and reporting intervals are in line with the intended uses of maize MON 87419. The GMO Panel concludes that maize MON 87419 is as safe as its conventional counterpart and the tested non-GM maize varieties with respect to potential effects on human and animal health and the environment.
RESUMO
Genetically modified maize GA21 × T25 was developed by crossing to combine two single events: GA21 and T25. The GMO Panel previously assessed the two single maize events and did not identify safety concerns. No new data on the single maize events were identified that could lead to modification of the original conclusions on their safety. The molecular characterisation, comparative analysis (agronomic, phenotypic and compositional characteristics) and the outcome of the toxicological, allergenicity and nutritional assessment indicate that the combination of the single maize events and of the newly expressed proteins in maize GA21 × T25 does not give rise to food and feed safety and nutritional concerns. The GMO Panel concludes that maize GA21 × T25, as described in this application, is as safe as its conventional counterpart and the non-GM reference varieties tested, and no post-market monitoring of food and feed is considered necessary. In the case of accidental release of viable maize GA21 × T25 grains into the environment, this would not raise environmental safety concerns. The post-market environmental monitoring plan and reporting intervals are in line with the intended uses of maize GA21 × T25. Post-market monitoring of food and feed is not considered necessary. The GMO Panel concludes that maize GA21 × T25 is as safe as its conventional counterpart and the non-GM reference varieties tested, with respect to potential effects on human and animal health and the environment.
RESUMO
Genetically modified cotton COT102 was developed to confer resistance against several lepidopteran species. The molecular characterisation data and bioinformatic analyses do not identify issues requiring food/feed safety assessment. None of the differences in the agronomic-phenotypic and compositional characteristics between cotton COT102 and its non-GM comparator needs further assessment, except for levels of acid detergent fibre, which do not raise safety or nutritional concerns. The GMO Panel does not identify safety concerns regarding the toxicity and allergenicity of the Vip3Aa19 and APH4 proteins as expressed in cotton COT102 and finds no evidence that the genetic modification would change the overall allergenicity of cotton COT102. In the context of this application, the consumption of food and feed from cotton COT102 does not represent a nutritional concern for humans and animals. The GMO Panel concludes that cotton COT102 is as safe as the non-GM comparator and non-GM cotton varieties tested, and no post-market monitoring of food/feed is considered necessary. In the case of accidental release of viable cotton COT102 seeds into the environment, this would not raise environmental safety concerns. The post-market environmental monitoring plan and reporting intervals are in line with the intended uses of cotton COT102. The GMO Panel concludes that cotton COT102 is as safe as its non-GM comparator and the tested non-GM cotton varieties with respect to potential effects on human and animal health and the environment.
RESUMO
The EFSA Panel on genetically modified organisms (GMO Panel) has previously assessed genetically modified (GM) sugar beet H7-1. This sugar beet was found to be as safe and nutritious as its conventional counterpart and commercial sugar beet varieties with respect to potential effects on human and animal health and the environment in the context of its intended uses. On 19 February 2021, European Commission requested EFSA to analyse new nucleic acid sequencing data and updated bioinformatics data for GM sugar beet H7-1 and to indicate whether the previous conclusions of the GMO Panel on safety of GM sugar beet H7-1 remain valid. The new sequencing data indicated seven nucleotide differences as compared to the sequence originally provided in applications EFSA-GMO-UK-2004-08 and EFSA-GMO-RX-006: five nucleotides in the 5' genomic flanking region and two nucleotides in the T-DNA region of the insert. Two mismatches between the originally submitted H7-1 event sequence and the plasmid sequence were confirmed by the newly obtained H7-1 sequence. Based on the analysis of the provided data, EFSA considers that the newly reported sequence differences are most likely attributed to sequencing errors in the originally reported sugar beet H7-1 event sequence. The new sequencing data and the bioinformatic analyses performed on the new sequence did not give rise to safety issues. Therefore, EFSA concludes that the original risk assessment of sugar beet H7-1 remains valid.
RESUMO
In 2012, EFSA issued an opinion on plants developed through cisgenesis and intragenesis. With the development of New Genomic Techniques (NGTs) in the last decade, cisgenic and intragenic plants can now be obtained with the insertion of a desired sequence in a precise location of the genome. EFSA has been requested by European Commission to provide an updated scientific opinion on the safety and the risk assessment of plants developed through cisgenesis and intragenesis, in order to (i) identify potential risks, comparing them with those posed by plants obtained by conventional breeding and Established Genomic Techniques (EGTs) and (ii) to determine the applicability of current guidelines for the risk assessment of cisgenic and intragenic plants. The conclusions of the previous EFSA opinion were reviewed, taking into consideration the new guidelines and the recent literature. The GMO panel concludes that no new risks are identified in cisgenic and intragenic plants obtained with NGTs, as compared with those already considered for plants obtained with conventional breeding and EGTs. There are no new data since the publication of the 2012 EFSA opinion that would challenge the conclusions raised in that document. The conclusions of the EFSA 2012 Scientific Opinion remain valid. The EFSA GMO Panel reiterates from these conclusions that with respect to the source of DNA and the safety of the gene product, the hazards arising from the use of a related plant-derived gene by cisgenesis are similar to those from conventional plant breeding, whereas additional hazards may arise for intragenic plants. Furthermore, the EFSA GMO Panel considers that cisgenesis and intragenesis make use of the same transformation techniques as transgenesis, and therefore, with respect to the alterations to the host genome, cisgenic, intragenic and transgenic plants obtained by random insertion do not cause different hazards. Compared to that, the use of NGTs reduces the risks associated with potential unintended modifications of the host genome. Thus, fewer requirements may be needed for the assessment of cisgenic and intragenic plants obtained through NGTs, due to site-directed integration of the added genetic material. Moreover, the GMO panel concludes that the current guidelines are partially applicable and sufficient. On a case-by-case basis, a lesser amount of data might be needed for the risk assessment of cisgenic or intragenic plants obtained through NGTs.
RESUMO
EFSA was asked by the european Commission to develop criteria as advice for consideration for the risk assessment of plants produced by targeted mutagenesis, cisgenesis and intragenesis. EFSA proposes in this statement six main criteria to assist the risk assessment of these plants. The first four criteria are related to the molecular characterisation of the genetic modification introduced in the recipient plant. The four criteria evaluate whether any exogenous DNA sequence(s) is/are present (Criterion 1), whether such sequence derives from the breeders' gene pool (Criterion 2), the type of integration (Criterion 3) and whether any endogenous plant gene is interrupted (Criterion 4). Depending on the evaluation of the above criteria, the product can be a genome edited plant where no exogenous DNA sequence is present, or a cisgenic or intragenic plant where the cisgenic and intragenic sequence are introduced by targeted insertion and no plant endogenous genes are interrupted. In these cases, two more criteria are assessed to evaluate the history of safe use (Criterion 5) and the structure and function of the new allele (Criterion 6). If cisgenic and intragenic sequence are introduced by random integration without interruption of an endogenous gene, or when no risk is identified when an endogenous gene is interrupted, the criteria 5 and 6 will also be assessed. Evaluating the history of safe use is an important part of the proportionate risk assessment of cisgenic, intragenic and genome-edited plants since the newly introduced allele may already be present in nature. However, when the history of safe use cannot be sufficiently demonstrated, the function and structure of the introduced allele should be carefully assessed. Recommendations are also included on the aspects that need further elaboration for full applicability of the criteria proposed herein are also included.
RESUMO
Synthetic biology (SynBio) is an interdisciplinary field at the interface of molecular engineering and biology aiming to develop new biological systems and impart new functions to living cells, tissues and organisms. EFSA has been asked by the European Commission to evaluate SynBio developments in agri-food with the aim of identifying the adequacy and sufficiency of existing guidelines for risk assessment and determine if updated guidance is needed. In this context, the GMO Panel has previously adopted an Opinion evaluating the SynBio developments in agri-food/feed and the adequacy and sufficiency of existing guidelines for the molecular characterisation and environmental risk assessment of genetically modified plants (GMPs) obtained through SynBio and reaching the market in the next decade. Complementing the above, in this Opinion, the GMO Panel evaluated the adequacy and sufficiency of existing guidelines for the food and feed risk assessment of GMPs obtained through SynBio. Using selected hypothetical case studies, the GMO Panel did not identify novel potential hazards and risks that could be posed by food and feed from GMPs obtained through current and near future SynBio approaches; considers that the existing guidelines are adequate and sufficient in some Synbio applications; in other cases, existing guidelines may be just adequate and hence need updating; areas needing updating include those related to the safety assessment of new proteins and the comparative analysis. The GMO Panel recommends that future guidance documents provide indications on how to integrate the knowledge available from the SynBio design and modelling in the food and feed risk assessment and encourages due consideration to be given to food and feed safety aspects throughout the SynBio design process as a way to facilitate the risk assessment of SynBio GMPs and reduce the amount of data required.
RESUMO
The GMO Panel has previously assessed genetically modified (GM) cotton DAS-24236-5 × DAS-21Ø23-5 and concluded that it is as safe as its conventional counterpart and other appropriate comparators with respect to potential effects on human and animal health and the environment in the context of its intended uses. On 17 November 2020, the European Commission requested EFSA to evaluate new DNA sequence information and updated bioinformatics data for cotton DAS-24236-5 × DAS-21Ø23-5 and to indicate whether the conclusions of the GMO Panel on the previously assessed cotton DAS-24236-5 × DAS-21Ø23-5 remain valid. The new sequence data of DAS-24236-5 showed the change of one nucleotide that results in one amino acid substitution, in the newly expressed Cry1F (synpro_L620Q) compared to the sequence originally reported. The GMO Panel concludes that this amino acid substitution in the protein is a mutation. Nonetheless with the exception of the bioinformatics analysis, the studies performed for the risk assessment of Cry1F in cotton DAS-24236-5 × DAS-21Ø23-5 remain valid. In addition, the new sequencing data showed a change in one nucleotide in the 5' flanking region of DAS-21Ø23-5 compared to the original sequence reported on the stack cotton DAS-24236-5 × DAS-21Ø23-5. The bioinformatic analyses of the newly sequenced DAS-21Ø23-5 event in the stack DAS-24236-5 × DAS-21Ø23-5 shows that the nucleotide difference is in the 5' flanking region outside the ORFs that span the 5' junction and is therefore not considered further in the safety assessment. Based on the information provided, the GMO Panel concludes that the corrected sequence does not give rise to any safety concerns, and therefore, the original risk assessment of cotton DAS-24236-5 × DAS-21Ø23-5 remains valid.
RESUMO
Oilseed rape MON 94100 was developed to confer tolerance to dicamba herbicide. The molecular characterisation data and bioinformatic analyses do not identify issues requiring food/feed safety assessment. None of the identified differences in the agronomic/phenotypic and compositional characteristics tested between oilseed rape MON 94100 and its conventional counterpart needs further assessment, except for the levels of carbohydrates, calcium and ADF in seeds, which do not raise nutritional and safety concerns. The GMO Panel does not identify safety concerns regarding the toxicity and allergenicity of the dicamba mono-oxygenase (DMO) protein as expressed in oilseed rape MON 94100. The GMO Panel finds no evidence that the genetic modification impacts the overall safety of oilseed rape MON 94100. In the context of this application, the consumption of food and feed from oilseed rape MON 94100 does not represent a nutritional concern in humans and animals. The GMO Panel concludes that oilseed rape MON 94100 is as safe as the conventional counterpart and non-GM oilseed rape reference varieties tested, and no post-market monitoring of food/feed is considered necessary. In the case of accidental release of viable oilseed rape MON 94100 seeds into the environment, this would not raise environmental safety concerns. The post-market environmental monitoring plan and reporting intervals are in line with the intended uses of oilseed rape MON 94100. The GMO Panel concludes that oilseed rape MON 94100 is as safe as its conventional counterpart and the tested non-GM oilseed rape reference varieties with respect to potential effects on human and animal health and the environment.
RESUMO
Genetically modified maize DP4114 × MON 89034 × MON 87411 × DAS-40278-9 was developed by crossing to combine four single events: DP4114, MON 89034, MON 87411 and DAS-40278-9. The GMO Panel previously assessed the four single maize events and two of the subcombinations and did not identify safety concerns. No new data on the single maize events or the assessed subcombinations were identified that could lead to modification of the original conclusions on their safety. The molecular characterisation, comparative analysis (agronomic, phenotypic and compositional characteristics) and the outcome of the toxicological, allergenicity and nutritional assessment indicate that the combination of the single maize events and of the newly expressed proteins in the four-event stack maize does not give rise to food and feed safety and nutritional concerns. Therefore, no post-market monitoring of food/feed is considered necessary. In the case of accidental release of viable four-event stack maize grains into the environment, this would not raise environmental safety concerns. The GMO Panel assessed the likelihood of interactions among the single events in eight of the maize subcombinations not previously assessed and concludes that these are expected to be as safe as the single events, the previously assessed subcombinations and the four-event stack maize. The post-market environmental monitoring plan and reporting intervals are in line with the intended uses of maize DP4114 × MON 89034 × MON 87411 × DAS-40278-9. Post-market monitoring of food/feed is not considered necessary. The GMO Panel concludes that the four-event stack maize and its subcombinations are as safe as its non-GM comparator and the tested non-GM maize varieties with respect to potential effects on human and animal health and the environment.
RESUMO
Maize MON 87429 was developed to confer tolerance to dicamba, glufosinate, quizalofop and 2,4-D herbicides. The molecular characterisation data and bioinformatic analyses do not identify issues requiring food/feed safety assessment. None of the identified differences in the agronomic/phenotypic and compositional characteristics tested between maize MON 87429 and its conventional counterpart needs further assessment, except for the levels of phytic acid in grains, which do not raise nutritional and safety concerns. The GMO Panel does not identify safety concerns regarding the toxicity and allergenicity of the DMO, PAT, FT_T and CP4 EPSPS proteins as expressed in maize MON 87429. The GMO Panel finds no evidence that the genetic modification impacts the overall safety of maize MON 87429. In the context of this application, the consumption of food and feed from maize MON 87429 does not represent a nutritional concern in humans and animals. The GMO Panel concludes that maize MON 87429 is as safe as the conventional counterpart and non-GM maize reference varieties tested, and no post-market monitoring of food/feed is considered necessary. In the case of accidental release of viable maize MON 87429 grains into the environment, this would not raise environmental safety concerns. The post-market environmental monitoring plan and reporting intervals are in line with the intended uses of maize MON 87429. The GMO Panel concludes that maize MON 87429, as described in this application, is as safe as its conventional counterpart and the tested non-GM maize reference varieties with respect to potential effects on human and animal health and the environment.
RESUMO
Maize DP4114 × MON 810 × MIR604 × NK603 (four-event stack maize) was produced by conventional crossing to combine four single events: DP4114, MON 810, MIR604 and NK603. The GMO Panel previously assessed the four single maize events and one of the subcombinations and did not identify safety concerns. No new data on the single maize events or the assessed subcombination were identified that could lead to modification of the original conclusions on their safety. The molecular characterisation, comparative analysis (agronomic, phenotypic and compositional characteristics) and the outcome of the toxicological, allergenicity and nutritional assessment indicate that the combination of the single maize events and of the newly expressed proteins in the four-event stack maize does not give rise to food and feed safety and nutritional concerns. The GMO Panel concludes that the four-event stack maize, is as safe as the comparator and the selected non-GM reference varieties. In the case of accidental release of viable grains of the four-event stack maize into the environment, this would not raise environmental safety concerns. The GMO Panel assessed the likelihood of interactions among the single events in nine of the maize subcombinations not previously assessed and concludes that these are expected to be as safe as the single events, the previously assessed subcombination and the four-event stack maize. Post-market monitoring of food/feed is not considered necessary. The post-market environmental monitoring plan and reporting intervals are in line with the intended uses of the four-event stack maize. The GMO Panel concludes that the four-event stack maize and its subcombinations are as safe as the non-GM comparator and the selected non-GM reference varieties with respect to potential effects on human and animal health and the environment.