RESUMO
In this retrospective, we first reviewed the synthesis of the oligo(phenylene-ethynylene) electrolytes (OPEs) we created in the past 10 years. Since the general antimicrobial activity of these OPEs had been reported in our previous account in Langmuir, we are focusing only on the unusual spectroscopic and photophysical properties of these OPEs and their complexes with anionic scaffolds and detergents in this Feature Article. We applied classical all-atom MD simulations to study the hydrogen bonding environment in the water surrounding the OPEs with and without detergents present. Our finding is that OPEs could form a unit cluster or unit aggregate with a few oppositely charged detergent molecules, indicating that the photostability and photoreactivity of these OPEs might be considerably altered with important consequences to their activity as antimicrobials and fluorescence-based sensors. Thus, in the following sections, we showed that OPE complexes with detergents exhibit enhanced light-activated biocidal activity compared to either OPE or detergent individually. We also found that similar complexes between certain OPEs and biolipids could be used to construct sensors for the enzyme activity. Finally, the OPEs could covalently bind to microsphere surfaces to make a bactericidal surface, which is simpler and more ordered than the surface grafted from microspheres with polyelectrolytes. In the Conclusions and Prospects section, we briefly summarize the properties of OPEs developed so far and future areas for investigation.
RESUMO
Candida species are the cause of many bloodstream infections through contamination of indwelling medical devices. These infections account for a 40% mortality rate, posing a significant risk to immunocompromised patients. Traditional treatments against Candida infections include amphotericin B and various azole treatments. Unfortunately, these treatments are associated with high toxicity, and resistant strains have become more prevalent. As a new frontier, light-activated phenylene ethynylenes have shown promising biocidal activity against Gram-positive and -negative bacterial pathogens, as well as the environmental yeast Saccharomyces cerevisiae In this study, we monitored the viability of Candida species after treatment with a cationic conjugated polymer [poly(p-phenylene ethynylene); PPE] or oligomer ["end-only" oligo(p-phenylene ethynylene); EO-OPE] by flow cytometry in order to explore the antifungal properties of these compounds. The oligomer was found to disrupt Candida albicans yeast membrane integrity independent of light activation, while PPE is able to do so only in the presence of light, allowing for some control as to the manner in which cytotoxic effects are induced. The contrast in killing efficacy between the two compounds is likely related to their size difference and their intrinsic abilities to penetrate the fungal cell wall. Unlike EO-OPE-DABCO (where DABCO is quaternized diazabicyclo[2,2,2]octane), PPE-DABCO displayed a strong propensity to associate with soluble ß-glucan, which is expected to inhibit its ability to access and perturb the inner cell membrane of Candida yeast. Furthermore, treatment with PPE-DABCO unmasked Candida albicans ß-glucan and increased phagocytosis by Dectin-1-expressing HEK-293 cells. In summary, cationic phenylene ethynylenes show promising biocidal activity against pathogenic Candida yeast cells while also exhibiting immunostimulatory effects.
Assuntos
Alcinos/farmacologia , Antifúngicos/farmacologia , Éteres/farmacologia , beta-Glucanas/farmacologia , Candida albicans/efeitos dos fármacos , Candida albicans/genética , Células HEK293 , Humanos , Lectinas Tipo C/metabolismoRESUMO
A wide range of oligo-p-phenylene ethynylenes has been shown to exhibit good biocidal activity against both Gram-negative and Gram-positive bacteria. While cell death may occur in the dark, these biocidal compounds are far more effective in the light as a result of their ability to sensitize the production of cell-damaging reactive oxygen species. In these studies, the interactions of a specific cationic oligo-p-phenylene ethynylene with spore-forming Bacillus atrophaeus and Bacillus anthracis Sterne have been investigated. Flow cytometry assays are used to rapidly monitor cell death as well as spore germination. This compound effectively killed Bacillus anthracis Sterne vegetative cells (over 4 log reduction), presumably by severe perturbations of the bacterial cell wall and cytoplasmic membrane, while also acting as an effective spore germinant in the dark. While 2 log reduction of B. anthracis Sterne spores was observed, it is hypothesized that further killing could be achieved through enhanced germination.
Assuntos
Antibacterianos/farmacologia , Bacillus anthracis/efeitos dos fármacos , Bacillus/efeitos dos fármacos , Fármacos Fotossensibilizantes/farmacologia , Polímeros/farmacologia , Esporos Bacterianos/efeitos dos fármacos , Bacillus/crescimento & desenvolvimento , Bacillus/ultraestrutura , Bacillus anthracis/crescimento & desenvolvimento , Bacillus anthracis/ultraestrutura , Parede Celular/efeitos dos fármacos , Parede Celular/ultraestrutura , Luz , Microscopia Eletrônica de Varredura , Espécies Reativas de Oxigênio/agonistas , Espécies Reativas de Oxigênio/metabolismo , Esporos Bacterianos/crescimento & desenvolvimento , Esporos Bacterianos/ultraestruturaRESUMO
Cationic oligo-p-phenylene ethynylenes have shown much promise as broad-spectrum light-activated antimicrobial compounds against both Gram-positive and Gram-negative bacteria. The anionic varieties, however, have weak biocidal activity. In this study, a complex is formed between a weakly biocidal anionic oligomer and a cationic surfactant, and the effects on their biocidal activity against Gram-negative E. coli and Gram-positive S. aureus are explored. The enhancement in biocidal activity that is observed when the complex is irradiated suggests that interfacial surfactant gives the complex a net-positive charge, allowing it to associate strongly with the bacterial membrane. The results of this study demonstrate a method for the enhancement of biocidal activity of singlet-oxygen sensitizers and corroborate the use of surfactants as trans-membrane drug-delivery agents.
Assuntos
Ânions/química , Anti-Infecciosos/química , Anti-Infecciosos/farmacologia , Oxigênio Singlete/química , Tensoativos/química , Tensoativos/farmacologia , Escherichia coli/efeitos dos fármacos , Bactérias Gram-Negativas/efeitos dos fármacos , Staphylococcus aureus/efeitos dos fármacosRESUMO
Cationic oligo-p-phenylene ethynylenes are highly effective light-activated biocides that deal broad-spectrum damage to a variety of pathogens, including bacteria. A potential problem arising in the long-term usage of these compounds is photochemical breakdown, which nullifies their biocidal activity. Recent work has shown that these molecules complex with oppositely-charged surfactants, and that the resulting complexes are protected from photodegradation. In this manuscript, we determine the biocidal activity of an oligomer and a complex formed between it and sodium dodecyl sulfate. The complexes are able to withstand prolonged periods of irradiation, continuing to effectively kill both Gram-negative and Gram-positive bacteria, while the oligomer by itself loses its biocidal effectiveness quickly in the presence of light. In addition, damage and stress responses induced by these biocides in both E. coli and S. aureus are discussed. This work shows that complexation with surfactants is a viable method for long-term light-activated biocidal applications.
Assuntos
Antibacterianos/química , Antibacterianos/farmacologia , Polímeros/química , Polímeros/farmacologia , Dodecilsulfato de Sódio/química , Tensoativos/química , Raios Ultravioleta , Escherichia coli/efeitos dos fármacos , Escherichia coli/fisiologia , Escherichia coli/efeitos da radiação , Staphylococcus aureus/efeitos dos fármacos , Staphylococcus aureus/fisiologia , Staphylococcus aureus/efeitos da radiação , Estresse Fisiológico/efeitos dos fármacos , Fatores de TempoRESUMO
Cell wall mannans of Candida albicans mask ß-(1,3)-glucan from recognition by Dectin-1, contributing to innate immune evasion. Glucan exposures are predominantly single receptor-ligand interaction sites of nanoscale dimensions. Candida species vary in basal glucan exposure and molecular complexity of mannans. We used super-resolution fluorescence imaging and a series of protein mannosylation mutants in C. albicans and C. glabrata to investigate the role of specific N-mannan features in regulating the nanoscale geometry of glucan exposure. Decreasing acid labile mannan abundance and α-(1,6)-mannan backbone length correlated most strongly with increased density and nanoscopic size of glucan exposures in C. albicans and C. glabrata, respectively. Additionally, a C. albicans clinical isolate with high glucan exposure produced similarly perturbed N-mannan structures and elevated glucan exposure geometry. Thus, acid labile mannan structure influences the nanoscale features of glucan exposure, impacting the nature of the pathogenic surface that triggers immunoreceptor engagement, aggregation, and signaling.
Assuntos
Candida/metabolismo , Glucanos/metabolismo , Mananas/metabolismo , HumanosRESUMO
This article reports an investigation of the photophysical properties and the light- and dark-biocidal activity of two poly(phenyleneethynylene) (PPE)-based conjugated polyelectrolytes (CPEs) bearing cationic imidazolium solubilizing groups. The two polymers feature the same PPE-type backbone, but they differ in the frequency of imidazoliums on the chains: PIM-4 features two imidazolium units on every phenylene repeat, whereas PIM-2 contains two imidazolium units on every other phenylene unit. Both polymers are very soluble in water and polar organic solvents, but their propensity to aggregate in water differs with the density of the imidazolium units. The polymers are highly fluorescent, and they exhibit the amplified quenching effect when exposed to a low concentration of anionic electron-acceptor anthraquinone disulfonate. The CPEs are also quenched by a relatively low concentration of pyrophosphate by an aggregation-induced quenching mechanism. The biocidal activity of the cationic imidazolium CPEs was studied against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus bacteria in the dark and under blue-light illumination. Both polymers are effective biocides, exhibiting greater than 3 log kill with 30-60 min of light exposure at concentrations of ≤10 µg mL(-1).
Assuntos
Antibacterianos/farmacologia , Eletrólitos/farmacologia , Imidazóis/farmacologia , Polímeros/farmacologia , Antibacterianos/química , Eletrólitos/química , Escherichia coli/efeitos dos fármacos , Imidazóis/química , Polímeros/química , Staphylococcus aureus/efeitos dos fármacosRESUMO
Mitigation of bacterial adhesion and subsequent biofilm formation is quickly becoming a strategy for the prevention of hospital-acquired infections. We demonstrate a basic strategy for surface modification that combines the ability to control attachment by microbes with the ability to inactivate microbes. The surface consists of two active materials: poly(p-phenylene ethynylene)-based polymers, which can inactivate a wide range of microbes and pathogens, and poly(N-isopropylacrylamide)-based polymers, which can switch between an hydrophobic "capture" state and a hydrophilic "release" state. The combination of these materials creates a surface that can both bind microbes in a switchable way and kill surface-bound microbes efficiently. Considerable earlier work with cationic poly(p-phenylene ethynylene) polyelectrolytes has demonstrated and characterized their antimicrobial properties, including the ability to efficiently destroy or deactivate Gram-negative and Gram-positive bacteria, fungi, and viruses. Similarly, much work has shown (1) that surface-polymerized films of poly(N-isopropylacrylamide) are able to switch their surface thermodynamic properties from a swollen, relatively hydrophilic state at low temperature to a condensed, relatively hydrophobic state at higher temperature, and (2) that this switch can control the binding and/or release of microbes to poly(N-isopropylacrylamide) surfaces. The active surfaces described herein were fabricated by first creating a film of biocidal poly(p-phenylene ethynylene) using layer-by-layer methods, and then conferring switchable adhesion by growing poly(N-isopropylacrylamide) through the poly(p-phenylene ethynylene) layer, using surface-attached polymerization initiators. The resulting multifunctional, complex films were then characterized both physically and functionally. We demonstrate that such films kill and subsequently induce widespread release of Gram-negative and Gram-positive bacteria.