RESUMO
Mercury (Hg) is a ubiquitous contaminant in the environment and its methylated form, methylmercury (MeHg), poses a worldwide health concern for humans and wildlife, primarily through fish consumption. Global production of forest fire ash, derived from wildfires and prescribed burns, is rapidly increasing due to a warming climate, but their interactions with aqueous and sedimentary Hg are poorly understood. Herein, we compared the differences of wildfire ash with activated carbon and biochar on the sorption of aqueous inorganic Hg and sedimentary Hg methylation. Sorption of aqueous inorganic Hg was greatest for wildfire ash materials (up to 0.21 µg g-1 or 2.2 µg g-1 C) among all of the solid sorbents evaluated. A similar Hg adsorption mechanism for activated carbon, biochar made of walnut, and wildfire ash was found that involves the formation of complexes between Hg and oxygen-containing functional groups, especially the -COO group. Notably, increasing dissolved organic matter from 2.4 to 70 mg C L-1 remarkably reduced Hg sorption (up to 40% reduction) and increased the time required to reach Hg-sorbent pseudo-equilibrium. Surprisingly, biochar and wildfire ash, but not activated carbon, stimulated MeHg production during anoxic sediment incubation, possibly due to the release of labile organic matter. Overall, our study indicates that while wildfire ash can sequester aqueous Hg, the leaching of its labile organic matter may promote production of toxic MeHg in anoxic sediments, which has an important implication for potential MeHg contamination in downstream aquatic ecosystems after wildfires.
Assuntos
Mercúrio , Compostos de Metilmercúrio , Poluentes Químicos da Água , Incêndios Florestais , Animais , Ecossistema , Sedimentos Geológicos , Humanos , Mercúrio/análise , Poluentes Químicos da Água/análiseRESUMO
Self-assembled, polymerized diacetylene (DA) nanostructures and two-dimensional films have been studied over the past two decades for sensor applications because of their straightforward visual readout. DA monomers, when exposed to UV light, polymerize to produce a visibly blue polymer. Blue phase polydiacetylenes (PDAs) when exposed to an external stimuli, such as temperature or UV light, undergo a chromatic phase transition to a fluorescent, visibly red phase. The tunability of the monomer to blue to red chromatic phase transitions by choice of diacetylene monomer in the presence of metal cations is systematically and comprehensively investigated to determine their effects on the properties of PDA Langmuir films. The polymerization kinetics and domain morphology of the PDA films were characterized using polarized fluorescent microscopy, UV-vis-fluorescent spectroscopy, and Fourier transform infrared spectroscopy (FTIR). Increasing the monomer alkyl tail length was found to strongly increase the UV dose necessary to produce optimally blue films and fully red films. A decrease in the polymer domain size was also correlated with longer-tailed DA molecules. Metal cations have a diverse effect on the film behavior. Alkaline-earth metals such as Mg, Ca, and Ba have a negligible effect on the phase transition kinetics but can be used to tune PDA polymer domain sizes. The Ni and Fe cations increase the UV dose necessary to produce red phase PDA films and significantly decrease the polymer domain sizes. The Zn, Cd, and Cu ions exhibit strong directed interactions with the PDA carboxylic acid headgroups, resulting in quenched fluorescence and a unique film morphology. FTIR analysis provides insight into the metal-PDA binding mechanisms and demonstrates that the coordination between the PDA film headgroups and the metal cations can be correlated with changes in the film morphology and kinetics. The findings from these studies will have broad utility for tuning PDA-based sensors for different applications and sensitivity ranges.
Assuntos
Polímeros , Cátions , Polímero Poliacetilênico , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
The increasing frequency and severity of wildfires poses human health risks, especially for those within burnt regions. The potential health effects of fire ash on farmworkers in orchards via inhalation exposure after fire is rarely studied. After the 2017 Thomas Fire, in Ventura County (California, USA), fire ash and corresponding soil samples were collected from several impacted orchards and analyzed for eight trace elements (TEs) and 16 polycyclic aromatic hydrocarbons (PAHs). Results indicate that except for mercury (Hg), the concentrations of TEs and PAHs were higher in ash samples compared with the corresponding soil samples. In general, ash samples showed greater potential to expose farmworkers to health risks than the corresponding soil samples. One site had particularly high concentrations of As (778 mg kg-1), Cr (629 mg kg-1), and Cu (499 mg kg-1) in the ash. This location corresponds to a house which was burned during the Thomas Fire, which might have contained chromated copper arsenate as a wood preservative. Therefore, the existence of construction materials in orchards could add hazardous materials to ash deposited on soil. Furthermore, a monitored dust generation experiment was designed to obtain the particle emission factors (PEF) of soil and ash, which is an essential parameter for the calculation of inhalation health risks. A two-fold difference in the PEFs was found between ash and the corresponding soil sample. Hence, health risks through inhalation exposure from fire ash may be underestimated if the default PEF suggested by the US Environmental Protection Agency is used.
Assuntos
Incêndios , Hidrocarbonetos Policíclicos Aromáticos , Poluentes do Solo , Oligoelementos , California , Monitoramento Ambiental , Fazendeiros , Humanos , Solo , Poluentes do Solo/análise , Oligoelementos/análiseRESUMO
Application of municipal biosolids in agriculture present a concern with potential uptake and bioaccumulation of pharmaceutical compounds from biosolids into agronomic plants. We evaluated the efficacy of biochar as a soil amendment to minimize uptake of antimicrobial agents (ciprofloxacin, triclocarban, and triclosan) in lettuce (Lactuca sativa) and carrot (Daucus carota) plants. Biochar reduced the concentration of ciprofloxacin and triclocarban in lettuce leaves and resulted in a 67% reduction of triclosan in carrot roots. There was no substantial difference in pharmaceutical concentrations in carrot and lettuce plant matter at low (2.0 g kg-1 soil) and high (20.4 g kg-1 soil) rates of applied biochar. The co-amendment of biochar and biosolids increased soil pH and nutrient content which were positively correlated with an increase in lettuce shoot biomass. Our results demonstrate the potential efficacy of using walnut shell biochar as a sorbent for pharmaceutical contaminants in soil without negatively affecting plant growth.
Assuntos
Carbanilidas/farmacologia , Carvão Vegetal , Ciprofloxacina/farmacologia , Daucus carota/efeitos dos fármacos , Lactuca/efeitos dos fármacos , Triclosan/farmacocinética , Agricultura/métodos , Anti-Infecciosos/farmacocinética , Biomassa , Biossólidos , Daucus carota/crescimento & desenvolvimento , Daucus carota/metabolismo , Lactuca/crescimento & desenvolvimento , Lactuca/metabolismo , Folhas de Planta/química , Folhas de Planta/efeitos dos fármacos , Folhas de Planta/metabolismo , Raízes de Plantas/química , Raízes de Plantas/efeitos dos fármacos , Raízes de Plantas/metabolismo , Brotos de Planta/efeitos dos fármacos , Solo/química , Poluentes do Solo/análise , Poluentes do Solo/farmacocinéticaRESUMO
Veterinary antibiotics used in agriculture can be introduced into the environment through land application of animal manure, accumulating in soils and groundwaters and posing a significant risk to human health and animal well-being. As the analysis of tetracyclines in soil is challenging due to their strong interaction with soil minerals and organic carbon, the objective of this study was to develop a reliable and reproducible method for quantitative analysis of chlortetracycline and oxytetracycline, and their respective metabolites in soils. A method based on pressurized liquid extraction (PLE) with in-cell clean-up was developed for the extraction of chlortetracycline and oxytetracycline and four likely metabolites from a set of four soils. Optimized conditions included a cell size of 22 mL, soil loading of 5 g, pH of 8.0, methanol:water ratio of 3:1, 50 °C, and two cycles. Soil extracts were analysed by high-performance liquid chromatography (HPLC) coupled with ion trap mass spectrometry (MS). Recoveries of seven tetracyclines from soil ranged from 41% to 110%. The limits of detection for tetracyclines were 0.08-0.3 µg g-1 soil, and intra- and inter-day variation ranged from 0.12-0.34%. The proposed PLE method is suitable for quantification of tetracyclines in agricultural soils at typical concentrations expected in contaminated environments.
Assuntos
Extração Líquido-Líquido/métodos , Poluentes do Solo/análise , Poluentes do Solo/isolamento & purificação , Tetraciclinas/análise , Tetraciclinas/isolamento & purificação , Agricultura , Antibacterianos/análise , Antibacterianos/isolamento & purificação , Cromatografia Líquida de Alta Pressão/métodos , Concentração de Íons de Hidrogênio , Limite de Detecção , Solo/química , Drogas Veterinárias/análise , Drogas Veterinárias/isolamento & purificaçãoRESUMO
Engineered nanoparticles (NPs) are increasingly used in commercial products including automotive lubricants, clothing, deodorants, sunscreens, and cosmetics and can potentially accumulate in our food supply. Given their size it is difficult to detect and visualize the presence of NPs in environmental samples, including crop plants. New analytical tools are needed to fill the void for detection and visualization of NPs in complex biological and environmental matrices. We aimed to determine whether radiolabeled NPs could be used as a noninvasive, highly sensitive analytical tool to quantitatively track and visualize NP transport and accumulation in vivo in lettuce (Lactuca sativa) and to investigate the effect of NP size on transport and distribution over time using a combination of autoradiography, positron emission tomography (PET)/computed tomography (CT), scanning electron microscopy (SEM), and transition electron microscopy (TEM). Azide functionalized NPs were radiolabeled via a "click" reaction with copper-64 (64Cu)-1,4,7-triazacyclononane triacetic acid (NOTA) azadibenzocyclooctyne (ADIBO) conjugate ([64Cu]-ADIBO-NOTA) via copper-free Huisgen-1,3-dipolar cycloaddition reaction. This yielded radiolabeled [64Cu]-NPs of uniform shape and size with a high radiochemical purity (>99%), specific activity of 2.2 mCi/mg of NP, and high stability (i.e., no detectable dissolution) over 24 h across a pH range of 5-9. Both PET/CT and autoradiography showed that [64Cu]-NPs entered the lettuce seedling roots and were rapidly transported to the cotyledons with the majority of the accumulation inside the roots. Uptake and transport of intact NPs was size-dependent, and in combination with the accumulation within the roots suggests a filtering effect of the plant cell walls at various points along the water transport pathway.
Assuntos
Radioisótopos de Cobre , Lactuca , Nanopartículas , Nanopartículas Metálicas , Tomografia por Emissão de Pósitrons combinada à Tomografia ComputadorizadaRESUMO
Environmental release of veterinary pharmaceuticals has been of regulatory concern for more than a decade. Monensin is a feed additive antibiotic that is prevalent throughout the dairy industry and is excreted in dairy waste. This study investigates the potential of dairy waste management practices to alter the amount of monensin available for release into the environment. Analysis of wastewater and groundwater from two dairy farms in California consistently concluded that monensin is most present in lagoon water and groundwater downgradient of lagoons. Since the lagoons represent a direct source of monensin to groundwater, the effect of waste management, by mechanical screen separation and lagoon aeration, on aqueous monensin concentration was investigated through construction of lagoon microcosms. The results indicate that monensin attenuation is not improved by increased solid-liquid separation prior to storage in lagoons, as monensin is rapidly desorbed after dilution with water. Monensin is also shown to be easily degraded in lagoon microcosms receiving aeration, but is relatively stable and available for leaching under typical anaerobic lagoon conditions.
Assuntos
Indústria de Laticínios , Monensin , Eliminação de Resíduos Líquidos/métodos , Ar , Animais , Biodegradação Ambiental , California , Meio Ambiente , Fazendas , Água Subterrânea , Esterco/análise , Monensin/análise , Monensin/metabolismo , Águas Residuárias/análise , Poluentes Químicos da Água/análise , Poluentes Químicos da Água/metabolismoRESUMO
The transport of oxytetracycline, chlortetracycline, and ivermectin from manure was assessed via surface runoff on irrigated pasture. Surface runoff plots in the Sierra Foothills of Northern California were used to evaluate the effects of irrigation water application rates, pharmaceutical application conditions, vegetative cover, and vegetative filter strip length on the pharmaceutical discharge in surface runoff. Experiments were designed to permit the maximum potential transport of pharmaceuticals to surface runoff water, which included pre-irrigation to saturate soil, trimming grass where manure was applied, and laying a continuous manure strip perpendicular to the flow of water. However, due to high sorption of the pharmaceuticals to manure and soil, less than 0.1% of applied pharmaceuticals were detected in runoff water. Results demonstrated an increase of pharmaceutical transport in surface runoff with increased pharmaceutical concentration in manure, the concentration of pharmaceuticals in runoff water remained constant with increased irrigation flow rate, and no appreciable decrease in pharmaceutical runoff was produced with the vegetative filter strip length increased from 30.5 to 91.5 cm. Most of the applied pharmaceuticals were retained in the manure or within the upper 5 cm of soil directly beneath the manure application sites. As this study evaluated conditions for high transport potential, the data suggest that the risk for significant chlortetracycline, oxytetracycline, and ivermectin transport to surface water from cattle manure on irrigated pasture is low.
Assuntos
Clortetraciclina/análise , Ivermectina/análise , Esterco/análise , Oxitetraciclina/análise , Poluentes Químicos da Água/análise , Irrigação Agrícola/métodos , Animais , California , Bovinos , Poluentes do Solo/análiseRESUMO
Animal waste products from concentrated animal feeding operations are a significant source of antibiotics to the environment. Monensin, an ionophore antibiotic commonly used to increase feed efficiency in livestock, is known to have varied toxicological effects on nontarget species. The current study builds on prior studies evaluating the impact of dairy management on groundwater quality by examining the transport of monensin in an agricultural field with coarse-textured soils during irrigation with lagoon wastewater. The dairy is located in California's San Joaquin Valley, where groundwater can be encountered <5 m below the surface. Groundwater samples were collected from a network of monitoring wells installed throughout the dairy and adjacent to irrigated fields before and after an irrigation event, which allowed for measurement of monensin potentially reaching the shallow groundwater as a direct result of irrigation with lagoon water. Monensin was extracted from water samples via hydrophilic-lipophilic balance solid-phase extraction and quantified with liquid chromatography-mass spectrometry. Irrigation water was found to contain up to 1.6 µg L monensin, but monensin was only detected in monitoring wells surrounding the waste storage lagoon. Water chemistry changes in the wells bordering the irrigated field suggest that up to 7% of irrigation water reached groundwater within days of irrigation. The study suggests that contamination of groundwater with monensin can occur primarily by compromised waste storage systems and that rapid transport of monensin to groundwater is not likely to occur from a single irrigation event.
Assuntos
Indústria de Laticínios , Monensin/análise , Poluentes Químicos da Água/análise , Irrigação Agrícola , Animais , California , Monitoramento Ambiental , Água Subterrânea , Água , Movimentos da ÁguaRESUMO
Agricultural practices are increasingly incorporating recycled waste materials, such as biosolids, to provide plant nutrients and enhance soil functions. Although biosolids provide benefits to soil, municipal wastewater treatment plants receive pharmaceuticals and heavy metals that can accumulate in biosolids, and land application of biosolids can transfer these contaminants to the soil. Environmental exposure of these contaminants may adversely affect wildlife, disrupt microbial communities, detrimentally affect human health through long-term exposure, and cause the proliferation of antibiotic-resistant bacteria. This study considers the use of biochar co-amendments as sorbents for contaminants from biosolids. The sorption of pharmaceuticals (ciprofloxacin, triclocarban, triclosan), and heavy metals (Cu, Cd, Ni, Pb) to biochars and biochar-biosolids-soil mixtures was examined. Phenylurea herbicide (monuron, diuron, linuron) sorption was also studied to determine the potential effect of biochar on soil-applied herbicides. A softwood (SW) biochar (510°C) and a walnut shell (WN) biochar (900°C) were used as contrasting biochars to highlight potential differences in biochar reactivity. Kaolinite and activated carbon served as mineral and organic controls. Greater sorption for almost all contaminants was observed with WN biochar over SW biochar. The addition of biosolids decreased sorption of herbicides to SW biochar, whereas there was no observable change with WN biochar. The WN biochar showed potential for reducing agrochemical and contaminant transport but may inhibit the efficacy of soil-applied herbicides. This study provides support for minimizing contaminant mobility from biosolids using biochar as a co-amendment and highlights the importance of tailoring biochars for specific characteristics through feedstock selection and pyrolysis-gasification conditions.
Assuntos
Carvão Vegetal/química , Herbicidas/análise , Metais Pesados/análise , Preparações Farmacêuticas/análise , Solo , Poluentes do SoloRESUMO
Biochar is increasingly been used as a soil amendment to improve water-holding capacity, reduce nutrient leaching, increase soil pH, and also as a means to reduce contamination through sorption of heavy metals or organic pollutants. The sorption behavior of three phenylurea herbicides (monuron, diuron and linuron) on five biochars (Enhanced Biochar, Hog Waste, Turkey Litter, Walnut Shell and Wood Feedstock) and an agricultural soil (Yolo silt loam) was investigated using a batch equilibration method. Sorption isotherms of herbicides to biochars were well described by the Freundlich model (R(2) = 0.93-0.97). The adsorption KF values ranged from 6.94 to 1306.95 mg kg(-1) and indicated the sorption of herbicides in the biochars and Yolo soil was in the sequence of linuron > diuron > monuron and walnut shell biochar > wood feedstock biochar > turkey litter biochar > enhanced biochar > hog waste biochar > Yolo soil. These data show that sorption of herbicides to biochar can have both positive (reduced off-site transport) and negative (reduced herbicide efficacy) implications and specific biochar properties, such as H/C ratio and surface area, should be considered together with soil type, agriculture chemical and climate condition in biochar application to agricultural soil to optimize the system for both agricultural and environmental benefits.
Assuntos
Carvão Vegetal/química , Herbicidas/química , Compostos de Fenilureia/química , Poluentes do Solo/química , Solo/química , Adsorção , Agricultura , Diurona/química , Linurona/química , Esterco , Compostos de Metilureia/química , MadeiraRESUMO
The co-contamination of arsenic (As) and cadmium (Cd) in rice fields presents a global imperative for resolution. However, understanding the complex microbially driven geochemical processes and network connectivity crucial for As and Cd bioavailability under the frequent redox transitions in rice fields remains limited. Here, we conducted a series of microcosm experiments, using flooding and drainage, alongside fertilization treatments to emulate different redox environment in paddy soils. Soil As significantly reduced in drained conditions following applications of biochar or calcium-magnesium-phosphate (CMP) fertilizers by 26.3 % and 31.2 %, respectively, with concurrent decreases in Cd levels. Utilizing geochemical models, we identified the primary redox cycles dynamically altering during flooding (Fe and S cycles) and drainage (Fe, Mn, and N cycles). PLS-SEM elucidated 76 % and 61 % of the variation in Cd and As through Mn and N cycles. Functional genes implicated in multi-element cycles were analyzed, revealing a significantly higher abundance of assimilatory N reduction genes (nasA, nirA/B, narB) in drained soil, whereas an increase in ammonia-oxidizing genes (amoA/B) and a decrease in nitrate reduction to ammonium genes were observed after CMP fertilizer application. Biochar application led to significant enrichment of the substrate-binding protein of the Mn transport gene (mntC). Moreover, Fe transport genes were enriched after biochar or CMP application compared to drained soils. Among 40 high-quality metagenome-assembled genomes (MAGs), microbial predictors associated with low Cd and As contents across different treatments were examined. Bradyrhizobacea harbored abundant Mn and FeIII transport genes, while Nitrososphaeraceae carried nitrification-related genes. Two MAGs affiliated with Caulobacteraceae, carrying diverse Fe transport genes, were enriched in biochar-applied soils. Therefore, applying CMP fertilizer or biochar in aerobic rice fields can synergistically reduce the bioavailability of Cd and As by specifically enhancing the circulation of essential elements.
Assuntos
Arsênio , Cádmio , Fertilizantes , Ferro , Manganês , Oryza , Microbiologia do Solo , Poluentes do Solo , Arsênio/metabolismo , Oryza/metabolismo , Oryza/crescimento & desenvolvimento , Poluentes do Solo/metabolismo , Manganês/química , Ferro/química , Ferro/metabolismo , Nitrogênio/metabolismo , Nitrogênio/química , Carvão Vegetal/química , Bactérias/metabolismo , Bactérias/genética , Oxirredução , Água/química , Solo/químicaRESUMO
The use of veterinary pharmaceuticals in beef cattle has led to concerns associated with the development of antibiotic resistance in bacteria and endocrine disruption in aquatic organisms. Despite the potential negative consequences, data on the transport and mitigation of pharmaceuticals in grazed watersheds with irrigated pasture are scarce. The objective of this study was to assess the transport of common beef cattle pharmaceuticals (oxytetracycline, chlortetracycline, and ivermectin) via surface runoff and leachate from manure amended to grass-vegetated soil boxes under irrigated pasture conditions. The transport of pharmaceuticals from animal manure in surface runoff and soil leachate was relatively low and appears to be limited by desorption and transport of pharmaceuticals entrained in the manure. In surface runoff, less than 4.2% of applied pharmaceuticals in manure (initial concentration: 0.2 mg kg of manure) was detected after 3 wk of irrigation. Concentrations of pharmaceuticals in surface runoff and leachate never exceeded 0.5 µg L. The major portion of pharmaceuticals (up to 99%) was retained in the manure or in the soil directly beneath the manure application site. Based on the minimal transport of oxytetracycline, chlortetracycline, and ivermectin, the risk of significant transport for these targeted beef cattle pharmaceuticals to surface water and groundwater from manure on irrigated pasture appears to be relatively low.
Assuntos
Carne Vermelha , Drogas Veterinárias , Animais , Bovinos , Monitoramento Ambiental , Esterco , Solo , Poluentes do SoloRESUMO
Arsenic exposure through rice consumption is a growing concern. Compared to Continuous Flooding (CF), irrigation practices that dry the soil at least once during the growing season [referred to here as Alternate Wetting and Drying (AWD)] can decrease As accumulation in grain; however, this can simultaneously increase grain Cd to potentially unsafe levels. We modelled grain As and Cd from field studies comparing AWD and CF to identify optimal AWD practices to minimize the accumulation of As and Cd in grain. The severity of soil drying during AWD drying event(s), quantified as soil water potential (SWP), was the main factor leading to a reduction in grain total As and inorganic As, compared to CF. However, lower SWP levels were necessary to decrease grain inorganic As, compared to total As. Therefore, if the goal is to decrease grain inorganic As, the soil needs to be dried further than it would for decreasing total As alone. The main factor driving grain Cd accumulation was when AWD was practiced during the season. Higher grain Cd levels were observed when AWD occurred during the early reproductive stage. Further, higher Cd levels were observed when AWD spanned multiple rice growth stages, compared to one stage. If Cd levels are concerning, the minimum trade-off between total As and Cd accumulation in rice grain occurred when AWD was implemented at a SWP of -47 kPa during one stage other than the early reproductive. While these results are not meant to be comprehensive of all the interactions affecting the As and Cd dynamics in rice systems, they can be used as a first guide for implementing AWD practices with the goal of minimizing the accumulation of As and Cd in rice grain.
Assuntos
Arsênio , Oryza , Poluentes do Solo , Irrigação Agrícola/métodos , Arsênio/análise , Cádmio , Grão Comestível/química , Solo , Poluentes do Solo/análise , Água , Abastecimento de ÁguaRESUMO
Biochar modification by metals and metal oxides is considered a practical approach for enhancing the adsorption capacity of anionic compounds such as phosphate (P). This study obtained paper mill sludge (PMS) biochar (PMSB) via a one-step process by pyrolyzing PMS waste containing ferric salt to remove anionic P from water. The ferric salt in the sludge was transformed into ferric oxide and zero-valent-iron (Fe0) in N2 atmosphere at pyrolysis temperatures ranging from 300 to 800 °C. The maximum adsorption (Qm) of the PMSBs for P ranged from 9.75 to 25.19 mg P/g. Adsorption is a spontaneous and endothermic process, which implies chemisorption. PMSB obtained at 800 °C (PMSB800) exhibited the best performance for P removal. Fe0 in PMSB800 plays a vital role in P removal via adsorption and coprecipitation, such as forming the ≡Fe-O-P ternary complex. Furthermore, the possible chemical precipitation of P by CaO decomposed from calcite (CaCO3; an additive of paper production that remains in PMS) may also contribute to the removal of P by PMSB800. Moreover, PMSBs can be easily separated magnetically from water after application and adsorption. This study achieved a waste-to-wealth strategy by turning waste PMS into a metal/metal oxide-embedded biochar with excellent P removal capability and simple magnetic separation properties via a one-step pyrolysis process.
Assuntos
Esgotos , Poluentes Químicos da Água , Adsorção , Carvão Vegetal , Fosfatos , Água , Poluentes Químicos da Água/análiseRESUMO
The removal of excessive ammonium from water is vital for preventing eutrophication of surface water and ensuring drinking water safety. Several studies have explored the use of biochar for removing ammonium from water. However, the efficacy of pristine biochar is generally weak, and various biochar modification approaches have been proposed to enhance adsorption capacity. In this study, biochar obtained from giant reed stalks (300, 500, 700 °C) was modified by sulfonation, and the ammonium adsorption capabilities of both giant reed biochars (RBCs) and sulfonated reed biochars (SRBCs) were assessed. The ammonium adsorption rates of SRBCs were much faster than RBCs, with equilibrium times of â¼2 h and â¼8 h for SRBCs and RBCs, respectively. The Langmuir maximum adsorption capacities of SRBCs were 4.20-5.19 mg N/g for SRBCs, significantly greater than RBCs (1.09-1.92 mg N/g). Physical-chemical characterization methods confirmed the increased levels of carboxylic and sulfonic groups on sulfonated biochar. The reaction of ammonium with these O-containing functional groups was the primary mechanism for the enhancement of ammonium adsorption by SRBCs. To conclude, sulfonation significantly improved the adsorption performance of biochar, suggesting its potential application for ammonium mitigation in water.
Assuntos
Compostos de Amônio , Poluentes Químicos da Água , Adsorção , Carvão Vegetal , Águas Residuárias , ÁguaRESUMO
Attenuated total reflectance (ATR) Fourier transform infrared (FTIR) spectroscopy and quantum chemical calculations were used to elucidate the influence of solution chemistry (pH, amino acid concentration) on the binding mechanisms of glutamic and aspartic acid to rutile (α-TiO(2)). The amino acids, glutamate and aspartate, contain carboxyl and amine groups whose dissociation over a pH range results in changes of molecular charge and reactivity, including reactions with mineral surfaces. At pH 3, a decrease of IR bands corresponding to protonated carboxyl groups is observed upon reaction with TiO(2) and indicates involvement of distal carboxyl groups during sorption. In addition, decreased IR bands arising from carboxyl bonds at 1400 cm(-1), concomitant to shifts to higher wavenumbers for ν(as)(γ-COO(-)) and ν(as)(α-COO(-)) (particularly at low glutamate concentrations), are indicative of inner-sphere coordination of both carboxyl groups and therefore suggest a "lying down" surface species. IR spectra of aspartate reacted with rutile are similar to those of solution-phase samples, without peak shifts indicative of covalent bonding, and outer-sphere coordination is predicted. Quantum chemical calculations were carried out to assist in elucidating molecular mechanisms for glutamate binding to rutile and are in reasonable agreement with experimental data. The combined use of ATR-FTIR data and quantum calculations suggests three potential surface configurations, which include (1) bridging-bidentate where glutamate is "lying down" and binding occurs through inner-sphere coordination of both α- and γ-carboxyl groups; (2) chelating-monodentate in which glutamate binds through inner-sphere coordination with the γ-carboxyl group in a "standing up" configuration (with or without protonation of the α-carboxyl); and (3) another bridging-bidentate configuration where glutamate is binding to rutile via inner-sphere coordination of the α-carboxyl group and outer-sphere coordination with the γ-carboxyl ("lying down").
Assuntos
Ácido Aspártico/química , Ácido Glutâmico/química , Teoria Quântica , Espectroscopia de Infravermelho com Transformada de Fourier , Titânio/química , Modelos Moleculares , Conformação Molecular , Propriedades de Superfície , Água/químicaRESUMO
The retention of organic pollutant (OP) in soils is commonly attributed to interactions with soil organic matter (SOM), perhaps overlooking substantial involvement of soil minerals. In this study, 36 soil samples with far-ranging ratios of clay to organic carbon were used to examine contribution of minerals on soil sorption of pentachlorophenol (PCP) and phenanthrene (PHE). Sorption isotherms (n = 216) were fit individually using three typical sorption models, with the most fitted Kd values screened out for quantification of the net mineral contribution to total sorption via development of mathematical model accounting for associations between minerals and SOM. Two mineral-relevant parameters [adsorption distribution coefficient (Kmin) and mineral contribution index (MCI)] were simultaneously defined. Previously reported soil sorption data of PCP, PHE and butachlor (13, 12 and 46, respectively) were also extracted and included to improve the credibility of mathematic model. The average MCI values were calculated as 0.421, 0.405 and 0.512 in PCP, PHE and butachlor treated soils, respectively, very close to or even over than the minerals dominant critical value (0.5). This suggested the significant, or even predominant, contribution of minerals - as compared to SOM. Significant dependence of MCI with four conventional parameters of soil property further offered the possibility to roughly evaluate mineral contributions based on estimated threshold values of soil property parameters (especially TOC). This study provides an accessible approach for predicting the contribution of minerals in soil OP retention, especially highlighting their predominant roles vs. SOM in regulating OP removal in most of subsurface soil or contaminated brownfields where organic carbon content of soil was very low, that was not like what previously believed.
Assuntos
Poluentes Ambientais , Poluentes do Solo , Adsorção , Minerais , Modelos Teóricos , Solo , Poluentes do Solo/análiseRESUMO
Poly- and perfluoroalkyl substances (PFAS) present globally in drinking-, waste-, and groundwater sources are contaminants of emerging concern due to their long-term environmental persistence and toxicity to organisms, including humans. Here we review PFAS occurrence, behavior, and toxicity in various water sources, and critically discuss their removal via mineral adsorbents, including natural aluminosilicate clay minerals, oxidic clays (Al, Fe, and Si oxides), organoclay minerals, and clay-polymer and claycarbon (biochar and graphene oxide) composite materials. Among the many remediation technologies, such as reverse osmosis, adsorption, advanced oxidation and biologically active processes, adsorption is the most suitable for PFAS removal in aquatic systems. Treatment strategies using clay minerals and oxidic clays are inexpensive, eco-friendly, and efficient for bulk PFAS removal due to their high surface areas, porosity, and high loading capacity. A comparison of partition coefficient values calculated from extracted data in published literature indicate that organically-modified clay minerals are the best-performing adsorbent for PFAS removal. In this review, we scrutinize the corresponding plausible mechanisms, factors, and challenges affecting the PFAS removal processes, demonstrating that modified clay minerals (e.g., surfactant, amine), including some commercially available products (e.g., FLUORO-SORB®, RemBind®, matCARE™), show good efficacy in PFAS remediation in contaminated media under field conditions. Finally, we propose future research to focus on the challenges of using clay-based adsorbents for PFAS removal from contaminated water due to the regeneration and safe-disposal of spent clay adsorbents is still a major issue, whilst enhancing the PFAS removal efficiency should be an ongoing scientific effort.