The dependence of the Schottky barrier height on carbon nanotube diameter for Pd-carbon nanotube contacts.

Direct measurements are presented of the Schottky barrier (SB) heights of carbon nanotube devices contacted with Pd electrodes. The SB barrier heights were determined from the activation energy of the temperature-dependent thermionic emission current in the off-state of the devices. The barrier heights generally decrease with increasing diameter of the nanotubes and they are in agreement with the values expected when assuming little or no influence of Fermi level pinning.

A fast and low-power microelectromechanical system-based non-volatile memory device.

Several new generation memory devices have been developed to overcome the low performance of conventional silicon-based flash memory. In this study, we demonstrate a novel non-volatile memory design based on the electromechanical motion of a cantilever to provide fast charging and discharging of a floating-gate electrode. The operation is demonstrated by using an electromechanical metal cantilever to charge a floating gate that controls the charge transport through a carbon nanotube field-effect transistor. The set and reset currents are unchanged after more than 11 h constant operation. Over 500 repeated programming and erasing cycles were demonstrated under atmospheric conditions at room temperature without degradation. Multinary bit programming can be achieved by varying the voltage on the cantilever. The operation speed of the device is faster than a conventional flash memory and the power consumption is lower than other memory devices.