RESUMO
We present a tunable (6.62-11.34 µm), singly-resonant, cascade optical parametric oscillator with intracavity pumping of BaGa2GeSe6 in the second stage and spectral narrowing realized by a Volume Bragg Grating acting on the signal wave of the first stage which serves as a pump for the second stage. The maximum energy achieved near 8 µm in the narrowband regime is 1.1 mJ at 100â Hz (spectral width: â¼20â cm-1, pulse duration: â¼7â ns). The overall conversion efficiency from 1 to 8 µm for broadband and narrowband operation is 4.0% and 3.1%, respectively, corresponding to quantum efficiencies of 31% and 23%.
RESUMO
In this work, a novel 2.7 µm source used for CO2 and H2O vapor spectroscopy using the backward propagating wave of a backward wave optical parametric oscillator (BWOPO) is demonstrated for the first time to our knowledge. The unique properties of BWOPOs eliminate the need for additional spectral narrowing or wavelength stabilization, enabling the use of a multi-longitudinal mode Q-switched pump laser centered around 1030 nm. A full characterization of the source is presented, revealing a central output at 2712 nm, showcasing a temperature tuning of -1.77 GHz/K, and achieving an output pulse energy of 2.3 µJ. Novel methods are introduced for measuring the linewidth and wavelength stability using the ambient laboratory air. These approaches demonstrate a narrow output of 43 pm and establish an upper limit of stability at 65 MHz, with no active means of stabilization. These findings underscore the potential of BWOPOs as a robust platform for future differential absorption lidar (DIAL) systems.
RESUMO
A stable, narrow-bandwidth (274â MHz) backward wave optical parametric oscillator (BWOPO) generating mJ-level backward signal at 1885nm and forward idler at 2495â nm is presented. The BWOPO was pumped by a single-longitudinal mode, Q-switched Nd:YAG high-energy laser at 1064â nm. We show that multi-transversal mode pumping leads to the spectral broadening of the BWOPO backward signal and the generation of nanosecond pulses 2.7 times above the Fourier transform limit. We demonstrate over 100â GHz continuous tuning of the parametric output by adjusting the temperature of the BWOPO crystal, showcasing the significant role of thermal expansion in tuning performance. The BWOPO signal was used as a seed for a single-stage PPRKTP optical parametric amplifier (OPA) to boost the narrowband signal and idler energies to 20 mJ. This combination of mJ-level BWOPO seed with a single-stage PPRKTP OPA comprises a simple concept that would benefit long-range differential absorption lidar (DIAL) in the near and mid-infrared regions.
RESUMO
We demonstrate first-order quasi-phase-matched backward second-harmonic generation (BSHG) with an efficiency of 18.7%. This represents an increase by two orders of magnitude from earlier experiments employing higher-order quasi-phase-matching. The efficient BSHG is demonstrated in bulk periodically poled Rb:KTiOPO4 with a poling period of 317â nm. Using these structures, the frequency doubling in the backward direction is achieved for the fundamental wavelength of 2309â nm. Here we report on the experimental investigation of the BSHG properties such as spectral bandwidth, temperature tuning, and temperature bandwidth by employing broadband and narrowband fundamental wavelength sources. The BSHG properties are compared with those of co-propagating second harmonic generation to reveal the BSHG potential for novel applications that were proposed theoretically but have not been realized in practice so far.
RESUMO
We demonstrate a continuously tunable mid-infrared source that produces narrowband radiation at 1981â nm and 2145â nm based on a tunable Yb-based hybrid MOPA pump and a backward-wave optical parametric oscillator (BWOPO). The BWOPO employs a PPRKTP crystal with 580â nm domain periodicity. The BWOPO has a record-low oscillation threshold of 19.2â MW/cm2 and generates mJ level output with an overall efficiency exceeding 70%, reaching an average power of 5.65W at the repetition rate of 5â kHz. The system is mechanically robust and optical cavity-free, making it suitable for spectroscopic systems on mobile platforms. The mid-infrared signal frequency is tuned by pump tuning with a linear pump-to-signal frequency translation rate close to the predicted 1 to 1.001â Hz/Hz.
RESUMO
A new technique for mode-locking is demonstrated based on two lasers sharing one leg for sum-frequency generation. When the two lasers had equal round trip time one will produce bright pulses and the other dark pulses. Both lasers used Nd:YVO4 as the gain material, but operated at different wavelengths, namely 1064â nm and 1342â nm. In the present configuration, sub-250 ps pulses were generated at a repetition rate of 276â MHz with an output power of 70â mW. With appropriate choice of round trip loss at the two wavelengths it was possible to choose which laser was generating the bright pulses.
RESUMO
This paper presents a first demonstration of range-resolved differential absorption LIDAR (DIAL) measurements of the water vapor main isotopologue H2 16O and the less abundant semi-heavy water isotopologue HD16O with the aim of determining the isotopic ratio. The presented Water Vapor and Isotope Lidar (WaVIL) instrument is based on a parametric laser source emitting nanosecond pulses at 1.98 µm and a direct-detection receiver utilizing a commercial InGaAs PIN photodiode. Vertical profiles of H2 16O and HD16O were acquired in the planetary boundary layer in the suburban Paris region up to a range of 1.5 km. For time averaging over 25 min, the achieved precision in the retrieved water vapor mixing ratio is 0.1 g kg-1 (2.5% relative error) at 0.4 km above ground level (a.g.l.) and 0.6 g kg-1 (20%) at 1 km a.g.l. for 150 m range bins along the LIDAR line of sight. For HD16O, weaker absorption has to be balanced with coarser vertical resolution (600 m range bins) in order to achieve similar relative precision. From the DIAL measurements of H2 16O and HD16O, the isotopic abundance δD was estimated as -51 at 0.4 km above the ground and -119 in the upper part of the boundary layer at 1.3 km a.g.l. Random and systematic errors are discussed in the form of an error budget, which shows that further instrumental improvements are required on the challenging path towards DIAL-profiling of the isotopic abundance with range resolution and precision suitable for water cycle studies.
RESUMO
A Nd:YVO4 laser operating at 1064â nm generating a stable mode-locked train of 10 ps-long dark pulses with a 211â MHz repetition rate is presented. The mode-locking relies on a periodic loss modulation produced by intra-cavity sum-frequency mixing with a synchronous bright-pulse train from a mode-locked femtosecond Yb:KYW laser at 1040â nm. A modulation depth of 90% was achieved for the dark pulses, confirmed by cross-correlation measurements. The ultrafast loss modulation injects power into the Nd:YVO4 laser cavity modes beyond the laser gain bandwidth. At proper laser cavity length, the detuning interaction of these modes with the lasing modes leads to the generation of periodic ultrafast transients at frequencies above 1.5 THz.
RESUMO
A midinfrared single-photon-counting lidar at 3 µm is presented. The 3 µm photons were upconverted to 790 nm in a periodically poled rubidium-doped KTiOPO4 crystal through intracavity mixing inside a 1064 nm Nd:YVO4 laser and detected using a conventional silicon single-photon avalanche detector (SPAD). The lidar system could distinguish 1 mm deep features on a diffusely reflecting target, limited by the SPAD and time-tagging electronics. This technique could easily be extended to longer wavelengths within the transparency of the nonlinear crystal.
RESUMO
By generating terahertz pulses in KTP crystals through optical rectification with a pump photon energy varying from below to above the bandgap, we observe a peak of the THz signal at the bandgap energy but also a second one around half the bandgap. This later one is attributed to a two-photon absorption enhanced nonlinearity, which is validated by the similarity of the two-photon absorption coefficient and THz peak amplitude data versus the pump photon energy. A careful analysis of the KTP sample absorption spectral dependence nearby the bandgap demonstrates that KTP is an indirect bandgap crystal, whose absorption below the bandgap involves emission of a phonon related to the symmetric Ti-O stretching vibration, i.e. the ν1 (A1g) mode.
RESUMO
We demonstrate multi-cycle terahertz (MC-THz) generation in a 15.5 mm long periodically poled rubidium (Rb)-doped potassium titanyl phosphate (Rb:PPKTP) crystal with a poling period of 300 µm. By cryogenically cooling the crystal to 77 K, up to 0.72 µJ terahertz energy is obtained at a frequency of 0.5 THz with a 3 GHz bandwidth. A maximum internal optical-to-terahertz conversion efficiency of 0.16% is achieved, which is comparable with results achieved using periodically poled lithium niobate crystal. Neither photorefractive effects nor damage was observed with up to 900mJ/cm2, showing the great potential of Rb:PPKTP for multi-millijoule-level MC-THz generation.
RESUMO
We worked on a new scheme of quasi-phase matching (QPM) based on the negative first order of the spatial modulation of the sign of the second-order nonlinearity. Applying this scheme in the case of angular-QPM (AQPM) in a biaxial crystal reveals new directions of propagation for efficient parametric frequency conversion as well as "giant" spectral acceptances. The experimental validation is performed in a periodically poled rubidium-doped KTiOPO4 biaxial crystal. This new approach naturally extends to other periodically poled uniaxial crystals such as periodically poled LiNbO3.
RESUMO
A single-photon-counting mid-infrared LIDAR is presented. 2.4 µm mid-infrared photons were up-converted to 737 nm by intra-cavity mixing in a periodically poled rubidium-doped KTiOPO4 crystal inside a Nd:YVO4 laser. The up-converted photons were detected by a Si single-photon avalanche photodiode (SPAD). A temporal resolution of 42 ps and a dark count rate of 500 Hz were achieved, limited by the SPAD and ambient light leakage. It allowed for detection of two targets separated by only a few millimeters. This technique is easily extendable to longer wavelengths, limited primarily by the nonlinear crystal transparency.
RESUMO
We have designed and built a wavelength-tunable optical source for standoff detection of gaseous chemicals by differential absorption spectrometry in the long-wave infrared. It is based on a nanosecond 2 µm single-frequency optical parametric oscillator, whose idler wave is amplified in large aperture Rb:PPKTP crystals. The signal and idler waves are mixed in ZnGeP2 crystals to produce single-frequency tunable radiation in the 7.5-10.5 µm range. The source was integrated into a direct detection lidar to measure sarin and sulfur mustard inside a closed chamber, in an integrated path configuration with a noncooperative target.
RESUMO
The strict momentum conservation constraints for backward-wave optical parametric oscillators (BWOPOs) gives an inherently narrowband backward-generated wave, even with broadband pumping. Unfortunately, the limited tuning range of this wave restricts potential applications. Here we demonstrate a method to circumvent this restriction and increase the tuning range by more than one order of magnitude. A linearly chirped pump modulation is transferred to the forward-generated BWOPO wave, which is then mixed with an identically chirped pump in a conventional optical parametric amplifier to obtain narrowband (38 GHz), broadly tunable, infrared radiation around 1.86 µm, with an output energy of 19 µJ.
RESUMO
The frequency modulation transfer property of a backward-wave optical parametric oscillator (BWOPO) is investigated in the context of near-IR pulse compression. The maximum transferrable bandwidth from the pump to the forward wave in a BWOPO is determined by the group dispersion mismatch. In comparison, the third-order phase introduced in a single-grating compressor setup is more detrimental to achieve optimum compression of the BWOPO forward wave. Nevertheless, we demonstrate a 220 GHz bandwidth transfer from 800 nm to 1.4 µm, with a compression factor of 115, leading to near-IR pulses as short as 1.3 ps with µJ energy.
RESUMO
We report on experimental implementation of a ferroelectric metasurface using an x-cut KTiOPO4 (KTP) crystal for efficient manipulation of terahertz (THz) radiation. Based on the multipolar resonances that are accommodated in KTP micro-blocks in a square array, the metasurface is fabricated by precision diamond-blade dicing. Adjusting the size of the KTP micro-blocks to tailor the relative spectral positions of the anisotropic multipolar resonances, we demonstrate a subwavelength-thin THz polarizer that functions as a transparent film in the y-direction and a magnetic mirror in the z-direction with a transmission contrast of 13 dB near 0.37 THz (820 µm). The ferroelectric-based all-dielectric metasurface will provide a versatile platform to engineer the THz waves in the far field and could potentially be combined with THz generation in the same material.
RESUMO
We report the first experimental validation of angular quasi-phase-matching (AQPM) theory in a biaxial crystal by performing second-harmonic generation (SHG) in the periodically-poled Rb-doped KTiOPO4 (PPRKTP) crystal cut as a sphere. Both AQPM and birefringence phase-matching (BPM) angles were measured thanks to a Kappa circle.
RESUMO
Strongly enhanced backward stimulated polariton scattering (BSPS) is demonstrated in periodically-poled KTiOPO4 (KTP) crystals with a high power-conversion efficiency up to 70%. We study the physical mechanism of such counter-propagating parametric interaction with phonon-polaritons in χ(2) modulated structures. BSPS is a three-wave mixing that is distinguished from backward stimulated Raman scattering (BSRS), while a strong absorption at large polariton wave-vectors can still make BSPS display certain characteristics of BSRS such as self-compression of the Stokes pulse. We also compare BSPS with counter-propagating parametric oscillation in the near- and mid-infrared range, providing an estimation of the fabrication error margin to expect the outcome of their competition in the same device.
RESUMO
We employ ferroelectrics to study the multipolar scattering in all-dielectric metasurfaces based on KTiOPO4 (KTP) micro-disks for efficient manipulation of electromagnetic waves in the THz spectral region (0.6-1.5 THz). By adjusting the aspect ratio of the disks near the multipolar resonances, we show that the KTP disk array can form a multifunctional metasurface that covers the entire range of the electromagnetic response with resonantly enhanced anisotropic properties. The proposed ferroelectric metasurfaces will provide a versatile platform to manipulate THz waves, and open possibilities to monolithically combine it with THz generation.