Sequential Co-Immobilization of Enzymes on Magnetic Nanoparticles for Efficient l-Xylulose Production.

Multi-enzymatic strategies have shown improvement in bioconversion during cofactor regeneration. In this study, purified l-arabinitol 4-dehydrogenase (LAD) and nicotinamide adenine dinucleotide oxidase (Nox) were immobilized via individual, mixed, and sequential co-immobilization approaches on magnetic nanoparticles, and were evaluated to enhance the conversion of l-arabinitol to l-xylulose. Initially, the immobilization of LAD or Nox on the nanoparticles resulted in a maximum immobilization yield and relative activity of 91.4% and 98.8%, respectively. The immobilized enzymes showed better pH and temperature profiles than the corresponding free enzymes. Furthermore, co-immobilization of these enzymes via mixed and sequential methods resulted in high loadings of 114 and 122 mg/g of support, respectively. Sequential co-immobilization of these enzymes proved more beneficial for higher conversion than mixed co-immobilization because of better retaining Nox residual activity. Sequentially co-immobilized enzymes showed a high relative conversion yield with broader pH, temperature, and storage stability profiles than the controls, along with high reusability. To the best of our knowledge, this is the first report on the mixed or sequential co-immobilization of LAD and Nox on magnetic nanoparticles for l-xylulose production. This finding suggests that selecting a sequential co-immobilization strategy is more beneficial than using individual or mixed co-immobilized enzymes on magnetic nanoparticles for enhancing conversion applications.

Nonsterile Process for Biohydrogen Production: Recent Updates, Challenges, and Opportunities.

Hydrogen (H2), a clean and versatile energy carrier, has recently gained significant attention as a potential solution for reducing carbon emissions and promoting sustainable energy systems. The yield and efficiency of the biological H2 production process primarily depend on sterilization conditions. Various strategies, such as heat inactivation and membrane-based sterilization, have been used to achieve desirable yields via microbial fermentation. Almost every failed biotransformation process is linked to nonsterile conditions at any reaction stage. Therefore, the production of renewable biofuels as alternatives to fossil fuels is more attractive. Pure sugars have been widely documented as a costly feedstock for H2 production under sterile conditions. Biotransformation under nonsterile conditions is more desirable for stable and sustainable operation. Low-cost feeds, such as biowaste, are considered suitable alternatives, but they require appropriate sterilization to overcome the limitations of inherited or contaminating microbes during H2 production. This article describes the status of microbial fermentative processes for H2 production under nonsterile conditions and discusses strategies to improve such processes for sustainable, cleaner production.

Emerging applications of bacteria as antitumor agents.

Bacteria are associated with the human body and colonize the gut, skin, and mucous membranes. These associations can be either symbiotic or pathogenic. In either case, bacteria derive more benefit from their host. The ability of bacteria to enter and survive within the human body can be exploited for human benefit. They can be used as a vehicle for delivering or producing bioactive molecules, such as toxins and lytic enzymes, and eventually for killing tumor cells. Clostridium and Salmonella have been shown to infect and survive within the human body, including in tumors. There is a need to develop genetic circuits, which enable bacterial cells to carry out the following activities: (i) escape the human immune system, (ii) invade tumors, (iii) multiply within the tumorous cells, (iv) produce toxins via quorum sensing at low cell densities, and (v) express suicide genes to undergo cell death or cell lysis after the tumor has been lysed. Thus, bacteria have the potential to be exploited as anticancer agents.

Bacterial biofilm inhibitors: An overview.

Bacteria that cause infectious diseases adopt biofilms as one of their most prevalent lifestyles. Biofilms enable bacteria to tolerate environmental stress and evade antibacterial agents. This bacterial defense mechanism has rendered the use of antibiotics ineffective for the treatment of infectious diseases. However, many highly drug-resistant microbes have rapidly emerged owing to such treatments. Different signaling mechanisms regulate bacterial biofilm formation, including cyclic dinucleotide (c-di-GMP), small non-coding RNAs, and quorum sensing (QS). A cell density-dependent phenomenon, QS is associated with c-di-GMP (a global messenger), which regulates gene expression related to adhesion, extracellular matrix production, the transition from the planktonic to biofilm stage, stability, pathogenicity, virulence, and acquisition of nutrients. The article aims to provide information on inhibiting biofilm formation and disintegrating mature/preformed biofilms. This treatment enables antimicrobials to target the free-living/exposed bacterial cells at lower concentrations than those needed to treat bacteria within the biofilm. Therefore, a complementary action of antibiofilm and antimicrobial agents can be a robust strategic approach to dealing with infectious diseases. Taken together, these molecules have broad implications for human health.

Plastic Eating Enzymes: A Step Towards Sustainability.

The large-scale usage of petro-chemical-based plastics has proved to be a significant source of environmental pollution due to their non-biodegradable nature. Microbes-based enzymes such as esterases, cutinases, and lipases have shown the ability to degrade synthetic plastic. However, the degradation of plastics by enzymes is primarily limited by the unavailability of a robust enzymatic system, i.e., low activity and stability towards plastic degradation. Recently, the machine learning strategy involved structure-based and deep neural networks show desirable potential to generate functional, active stable, and tolerant polyethylene terephthalate (PET) degrading enzyme (FAST-PETase). FAST-PETase showed the highest PET hydrolytic activity among known enzymes or their variants and degraded broad ranges of plastics. The development of a closed-loop circular economy-based system of plastic degradation to monomers by FAST-PETase followed by the re-polymerization of monomers into clean plastics can be a more sustainable approach. As an alternative to synthetic plastics, diverse microbes can produce polyhydroxyalkanoates, and their degradation by microbes has been well-established. This article discusses recent updates in the enzymatic degradation of plastics for sustainable development.

Immobilization of Laccase Through Inorganic-Protein Hybrids Using Various Metal Ions.

In this study, the inorganic-protein hybrid strategy was employed for immobilization of laccase from Rhus vernicifera (Rvlac) using various metals calcium, cobalt, copper, and zinc (Zn). The efficient synthesis of hybrids for Rvlac immobilization was noted at 4 °C for incubation of 24 h. Among these hybrids, the maximum encapsulation yields (EY) of 90.1% and relative activity (RA) of 225% to free enzyme were recorded for Zn and Rvlac based inorganic-protein hybrids as Zn3(PO4)2-Rvlac. The upper optimum pH, and temperature values were observed of 4.0, and 45 °C after immobilization as compared to 3.5, and 40 °C for the free enzyme, respectively. After encapsulation, Rvlac showed a significant improvement up to 11.4-fold in pH and 5.7-fold in temperature the activity profiles. Free enzyme completely lost its activity at 60 °C after 2 h of incubation, whereas Zn3(PO4)2-Rvlac retained its residual activity of 56.7% under similar conditions. After ten cycles of reusability, Zn3(PO4)2-Rvlac possessed high residual activity of 90.8%. This study showed that the variation in the metal ions for immobilization of Rvlac as inorganic-protein hybrids significantly altered EY and RA. Also, Zn3(PO4)2-Rvlac proved more efficient as compared to free laccase that can be beneficially employed for biotechnological applications. Supplementary Information: The online version contains supplementary material available at 10.1007/s12088-022-01000-5.

Biomolecules Production from Greenhouse Gases by Methanotrophs.

Harmful effects on living organisms and the environment are on the rise due to a significant increase in greenhouse gas (GHG) emissions through human activities. Therefore, various research initiatives have been carried out in several directions in relation to the utilization of GHGs via physicochemical or biological routes. An environmentally friendly approach to reduce the burden of significant emissions and their harmful effects is the bioconversion of GHGs, including methane (CH4) and carbon dioxide (CO2), into value-added products. Methanotrophs have enormous potential for the efficient biotransformation of CH4 to various bioactive molecules, including biofuels, polyhydroxyalkanoates, and fatty acids. This review highlights the recent developments in methanotroph-based systems for methanol production from GHGs and proposes future perspectives to improve process sustainability via biorefinery approaches.

Correction to: Biomethanol Production from Methane by Immobilized Co-cultures of Methanotrophs.

[This corrects the article DOI: 10.1007/s12088-020-00883-6.].

Rhus vernicifera Laccase Immobilization on Magnetic Nanoparticles to Improve Stability and Its Potential Application in Bisphenol A Degradation.

In the present study, Rhus vernicifera laccase (RvLac) was immobilized through covalent methods on the magnetic nanoparticles. Fe2O3 and Fe3O4 nanoparticles activated by 3-aminopropyltriethoxysilane followed with glutaraldehyde showed maximum immobilization yields and relative activity up to 81.4 and 84.3% at optimum incubation and pH of 18 h and 5.8, respectively. The maximum RvLac loading of 156 mg/g of support was recorded on Fe2O3 nanoparticles. A higher optimum pH and temperature of 4.0 and 45 °C were noted for immobilized enzyme compared to values of 3.5 and 40 °C for free form, respectively. Immobilized RvLac exhibited better relative activity profiles at various pH and temperature ranges. The immobilized enzyme showed up to 16-fold improvement in the thermal stability, when incubated at 60 °C, and retained up to 82.9% of residual activity after ten cycles of reuses. Immobilized RvLac exhibited up to 1.9-fold higher bisphenol A degradation efficiency potential over free enzyme. Previous reports have demonstrated the immobilization of RvLac on non-magnetic supports. This study has demonstrated that immobilization of RvLac on magnetic nanoparticles is very efficient especially for achieving high loading, better pH and temperature profiles, and thermal- and solvents-stability, high reusability, and higher degradation of bisphenol A.

Biotin and Zn2+ Increase Xylitol Production by Candida tropicalis.

In this study, the medium requirements to increase the production of xylitol by using Candida tropicalis (CT) have been investigated. The technique of single addition or omission of medium components was applied to determine the nutritional requirements. The addition of amino acids such as Asp, Glu, Gln, Asn, Thr, and Gly had no significant effect on CT growth. However, in the absence of other metal ions, there was a higher concentration of cell growth and xylitol production when only Zn2+ was present in the medium. The analysis of various vitamins unveiled that biotin and thiamine were the only vitamins required for the growth of CT. Surprisingly, when only biotin was present in the medium as a vitamin, there was less growth of CT than when the medium was complete, but the amount of xylitol released was significantly higher. Overall, this study will increase the xylitol production using the single omission or addtion technique.

Phe-140 Determines the Catalytic Efficiency of Arylacetonitrilase from Alcaligenes faecalis.

Arylacetonitrilase from Alcaligenes faecalis ATCC8750 (NitAF) hydrolyzes various arylacetonitriles to the corresponding carboxylic acids. A systematic strategy of amino acid residue screening through sequence alignment, followed by homology modeling and biochemical confirmation was employed to elucidate the determinant of NitAF catalytic efficiency. Substituting Phe-140 in NitAF (wild-type) to Trp did not change the catalytic efficiency toward phenylacetonitrile, an arylacetonitrile. The mutants with nonpolar aliphatic amino acids (Ala, Gly, Leu, or Val) at location 140 had lower activity, and those with charged amino acids (Asp, Glu, or Arg) exhibited nearly no activity for phenylacetonitrile. Molecular modeling showed that the hydrophobic benzene ring at position 140 supports a mechanism in which the thiol group of Cys-163 carries out a nucleophilic attack on a cyanocarbon of the substrate. Characterization of the role of the Phe-140 residue demonstrated the molecular determinant for the efficient formation of arylcarboxylic acids.

Deploying Biomolecules as Anti-COVID-19 Agents.

Severe acute respiratory syndrome coronavirus (SARS-CoV-2) known as COVID-19 has emerged as a major threat to human existence. COVID-19 seems to have undergone adaptive evolution through an intermediate host, most likely bats. The flu leads to severe pneumonia that causes respiratory and multi-organ failure. The absence of any known treatment procedures, drugs, or vaccines has created panic around the World. The need is to develop rapid testing kits, drugs and vaccines. However, these proposals are time-consuming processes. At present social distancing along with previously known traditional medicines can act as quick and short-term alternatives for treating this viral flu.

Biomethanol Production from Methane by Immobilized Co-cultures of Methanotrophs.

Methanol production by co-culture of methanotrophs Methylocystis bryophila and Methyloferula stellata was examined from methane, a greenhouse gas. Co-culture exhibited higher methanol yield of 4.72 mM at optimum ratio of M. bryophila and M. stellata (3:2) compared to individual cultures. The immobilized co-culture within polyvinyl alcohol (PVA) showed relative efficiency of 90.1% for methanol production at polymer concentration of 10% (v/v). The immobilized co-culture cells within PVA resulted in higher bioprocess stability over free cells at different pH, and temperatures. Free and encapsulated co-cultures showed maximum methanol production of 4.81 and 5.37 mM under optimum conditions, respectively. After five cycles of reusage under batch conditions, free and encapsulated co-cultures retained methanol production efficiency of 23.8 and 61.9%, respectively. The present investigation successfully revealed the useful influence of co-culture on the methanol production over pure culture. Further, encapsulation within the polymeric matrix proved to be a better approach for the enhanced stability of the bioprocess.

Diet, Gut Microbiota and COVID-19.

Worldwide, millions of individuals have been affected by the prevailing SARS-CoV-2. Therefore, a robust immune system remains indispensable, as an immunocompromised host status has proven to be fatal. In the absence of any specific antiviral drug/vaccine, COVID-19 related drug repurposing along with various other non-pharmacological measures coupled with lockdown have been employed to combat this infection. In this context, a plant based rich fiber diet, which happens to be consumed by a majority of the Indian population, appears to be advantageous, as it replenishes the host gut microbiota with beneficial microbes thereby leading to a symbiotic association conferring various health benefits to the host including enhanced immunity. Further, implementation of the lockdown which has proven to be a good non-pharmacological measure, seems to have resulted in consumption of home cooked healthy diet, thereby enriching the beneficial microflora in the gut, which might have resulted in better prognosis of COVID-19 patients in India in comparison to that observed in the western countries.

Characterization of Cellobiohydrolases from Schizophyllum commune KMJ820.

A novel cellobiohydrolase (CBH)-generating fungi have been isolated and categorized as Schizophyllum commune KMJ820 based on morphology and rDNA gene sequence. Cellulose powder was used as carbon source, the total enzyme activity was 11.51 U/ml is noted; which is among the highest amounts of CBH-generating microbes studied. CBH have been purified to homogenize, with pursual of serial chromatography using S. commune supernatants and two different CBHs were found; CBH 1 and 2. The filtered CBHs showed greater activity (V max = 51.4 and 20.8 U/mg) in contrast to CBHs from earlier studies. The MW (molecular weights) of S. commune CBH 1 and 2 were verified to be approximately 50 kDa and 150 kDa, respectively, by size exclusion chromatography. Even though CBHs have been evaluated from other sources, but S. commune CBH is prominent in comparison to other CBHs by its high enzyme activity.

Antimicrobial Activity of Amino-Derivatized Cationic Polysaccharides.

To improve the antimicrobial property of chitosan, water-soluble chitosan modified in their quaternary ammonium groups were synthesized. The antimicrobial properties were evaluated against Escherichia coli, Bacillus subtilis, Saccharomyces cerevisiae and Candida tropicalis. The activities increased with increasing cationic charges and the length of the alkyl chain as follows amino-chitosan, dimethylaminoethyl-chitosan, dimethylpropyl amino-chitosan, dimethylamino-1-propyl-chitosan, diethylaminoethyl (DEAE)-chitosan, and quaternized DEAE-chitosan. The modified cationic chitosans showed high antimicrobial property against B. subtilis-Gram-positive bacteria, but were less active towards yeast (C. tropicalis and S. cerevisiae) and E. coli-Gram-negative bacteria. The simple structure of the Gram-positive bacteria may explain why the cationic chitosan derivatives are more active towards B. subtilis than yeast and E. coli. The target sites of the chitosan derivatives are assumed to be the cytoplasmic membranes of microorganisms. The antimicrobial activities were strongly dependent on the cationic charge and the molecular weight. It can be suggested that these cationic chitosan derivatives have potential as antimicrobial agents.

Solvent-Tolerant Acyltransferase from Bacillus sp. APB-6: Purification and Characterization.

Amidase from Bacillus sp. APB-6 with very good acyltransferase activity was purified to homogeneity with a purification fold of 3.68 and 53.20% enzyme yield. The purified protein's subunit molecular mass was determined approximately 42 kDa. Hyperactivity of the enzyme was observed at pH 7.5 (150 mM, potassium-phosphate buffer) and 50 °C of incubation. An enhancement in activity up to 42% was recorded with ethylenediaminetetraacetic acid and dithiothreitol. The kinetic parameter K m values for substrates: acetamide and hydroxylamine-hydrochloride were 73.0 and 153 mM, respectively. Further, the V max for acyltransferase activity was 1667 U/mg of protein and the K i for acetamide was calculated as 37.0 mM. The enzyme showed tolerance to various organic solvents (10%, v/v) and worked well in the biphasic reaction medium. The acyltransferase activity in presence of solvents i.e. biphasic medium may prove highly favorable for the transformation of hydrophobic amides, which otherwise is not possible in simple aqueous phase.

Co-digestion of Biowastes to Enhance Biological Hydrogen Process by Defined Mixed Bacterial Cultures.

Co-digestion of biowastes for hydrogen (H2) production using defined mixed cultures can overcome the high risk of failure due to contamination and imbalanced nutrient status. H2 production from biowastes-pea-shells, potato peels (PP), onion peels (OP) and apple pomace, either individually or in various combinations was evaluated by hydrolyzing with defined hydrolytic mixed bacterial culture (MHC5) and subjecting the hydrolysate to mixture of defined H2 producers (MMC6). Co-digestion of OP and PP hydrolysate supplemented at H2 production stage with GM-2 and M-9 media resulted in 95 and 102 l H2/kg of Total solids (TS), respectively compared to 84 l H2/kg of TS in control. Upscaling the process by digesting 4.0 l slurry (16-fold) resulted in 88.5 and 95 l H2/kg of TS, respectively compared to 72 l H2/kg of TS in control. Thus, H2 production by co-digestion of biowastes could be improved through the supplementation with very dilute medium (0.1 ×) and selection of suitable biowastes under unsterile conditions. The overall efficiency can be further enhanced by integrating it with bioprocesses for biopolymers such as polyhydroxyalkanoates and or biofuels like methane production.

Antimicrobial Activity of Biosynthesized Silver Nanoparticles Decorated Silica Nanoparticles.

The production of cheap and effective compound for medicinal application is a major challenge for scientific community. So, several biological materials have been explored for the possible application in material synthesis which are useful in biomedical uses. Here, biomolecules from green tea leaves were functionalized on the surface of silicon dioxide nanoparticles (GSiO2 NPs). Next, the decoration silver (Ag) NPs on the surface of the GSiO2 NPs was observed in very short time of incubation in aqueous AgNO3. Ultraviolet-visible spectroscopy confirmed the formation of Ag NPs and the high-resolution transmission and scanning electron microscopies confirmed the decoration of spherical Ag NPs of 10 to 15 nm size on the surface of GSiO2 NPs. The antimicrobial activity of the Ag-GSiO2 NPs was determined against Staphylococcus aureus and Escherichia coli. The Ag-GSiO2 NPs displayed sustainable antimicrobial activity compared to Ag ions. The results indicate the potential value of Ag-GSiO2 NPs in surgical material and food processing.

Copper Ferrite Magnetic Nanoparticles for the Immobilization of Enzyme.

In this study, novel, hollow superparamagnetic copper ferrite (CuFe2O4) nanoparticles (NPs) were synthesized by a low-temperature hydrothermal method. The hollow magnetic spheres were characterized by field emission scanning electron microscopy and high resolution transmission electron microscopy to confirm their morphology and size. The hollow NPs were demonstrated as the support for biological materials by the immobilization of Thermomyces lanuginosus lipase on the inner and outer surfaces of the hollow spheres. The immobilization of the enzyme was confirmed by Fourier Transform Infra-red spectroscopy and confocal laser scanning microscopy. The immobilized enzyme was shown to have an immobilization efficiency of 84.5%, with approximately 176 mg g-1 of enzyme loading, for the hollow-NPs support. The immobilized enzyme exhibited high storage and temperature stability. The reusability of the immobilized lipase was more than 80% after 10 cycles of repeated use.