Vibrational dynamics and spectroscopy of water at porous g-C3N4 and C2N surfaces.

Porous graphitic materials containing nitrogen are promising catalysts for photo(electro)chemical reactions, notably water splitting, but can also serve as "molecular sieves". Nitrogen increases the hydrophilicity of the graphite parent material, among other effects. A deeper understanding of how water interacts with C- and N-containing layered materials, if and which differences exist between materials with different N content and pore size, and what the role of water dynamics is - a prerequsite for catalysis and sieving - is largely absent, however. Vibrational spectroscopy can answer some of these questions. In this work, the vibrational dynamics and spectroscopy of deuterated water molecules (D2O) mimicking dense water layers at room temperature on the surfaces of two different C/N-based materials with different N content and pore size, namely graphitic C3N4 (g-C3N4) and C2N, are studied using ab initio molecular dynamics (AIMD). In particular, time-dependent vibrational sum frequency generation (TD-vSFG) spectra of the OD modes and also time-averaged vSFG spectra and OD frequency distributions are computed. This allows us to distinguish "free" (dangling) OD bonds from OD bonds that are bound in a H-bonded water network or at the surface - with subtle differences between the two surfaces and also to a pure water/air interface. It is found that the temporal decay of OD modes is very similar on both surfaces with a correlation time near 4 ps. In contrast, TD-vSFG spectra reveal that the interconversion time from "bonded" to "free" OD bonds is about 8 ps for water on C2N and thus twice as long as for g-C3N4, demonstrating a propensity of the former material to stabilize bonded OD bonds.

Hydration at Highly Crowded Interfaces.

Understanding the molecular and electronic structure of solvated ions at surfaces requires an analysis of the interactions between the surface, the ions, and the solvent environment on equal footing. Here, we tackle this challenge by exploring the initial stages of Cs^{+} hydration on a Cu(111) surface by combining experiment and theory. Remarkably, we observe "inside-out" solvation of Cs^{+} ions, i.e., their preferential location at the perimeter of the water clusters on the metal surface. In addition, water-Cs complexes containing multiple Cs^{+} ions are observed to form at these surfaces. Established models based on maximum ion-water coordination and conventional solvation models cannot account for this situation, and the complex interplay of microscopic interactions is the key to a fundamental understanding.

Programmable Photocatalytic Activity of Multicomponent Covalent Organic Frameworks Used as Metallaphotocatalysts.

The multicomponent approach allows to incorporate several functionalities into a single covalent organic framework (COF) and consequently allows the construction of bifunctional materials for cooperative catalysis. The well-defined structure of such multicomponent COFs is furthermore ideally suited for structure-activity relationship studies. We report a series of multicomponent COFs that contain acridine- and 2,2'-bipyridine linkers connected through 1,3,5-benzenetrialdehyde derivatives. The acridine motif is responsible for broad light absorption, while the bipyridine unit enables complexation of nickel catalysts. These features enable the usage of the framework materials as catalysts for light-mediated carbon-heteroatom cross-couplings. Variation of the node units shows that the catalytic activity correlates to the keto-enamine tautomer isomerism. This allows switching between high charge-carrier mobility and persistent, localized charge-separated species depending on the nodes, a tool to tailor the materials for specific reactions. Moreover, nickel-loaded COFs are recyclable and catalyze cross-couplings even using red light irradiation.

Water on porous, nitrogen-containing layered carbon materials: the performance of computational model chemistries.

Porous, layered materials containing sp2-hybridized carbon and nitrogen atoms, offer through their tunable properties, a versatile route towards tailormade catalysts for electrochemistry and photochemistry. A key molecule interacting with these quasi two-dimensional materials (2DM) is water, and a photo(electro)chemical key reaction catalyzed by them, is water splitting into H2 and O2, with the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) as half reactions. The complexity of some C/N-based 2DM in contact with water raises special needs for their theoretical modelling, which in turn is needed for rational design of C/N-based catalysts. In this work, three classes of C/N-containing porous 2DM with varying pore sizes and C/N ratios, namely graphitic carbon nitride (g-C3N4), C2N, and poly(heptazine imides) (PHI), are studied with various computational methods. We elucidate the performance of different models and model chemistries (the combination of electronic structure method and basis set) for water and water fragment adsorption in the low-coverage regime. Further, properties related to the photo(electro)chemical activity like electrochemical overpotentials, band gaps, and optical excitation energies are in our focus. Specifically, periodic models will be tested vs. cluster models, and density functional theory (DFT) vs. wavefunction theory (WFT). This work serves as a basis for a systematic study of trends for the photo(electro)chemical activity of C/N-containing layered materials as a function of water content, pore size and density.

Protonated Imine-Linked Covalent Organic Frameworks for Photocatalytic Hydrogen Evolution.

Covalent organic frameworks (COFs) have emerged as an important class of organic semiconductors and photocatalysts for the hydrogen evolution reaction (HER)from water. To optimize their photocatalytic activity, typically the organic moieties constituting the frameworks are considered and the most suitable combinations of them are searched for. However, the effect of the covalent linkage between these moieties on the photocatalytic performance has rarely been studied. Herein, we demonstrate that donor-acceptor (D-A) type imine-linked COFs can produce hydrogen with a rate as high as 20.7 mmol g-1 h-1 under visible light irradiation, upon protonation of their imine linkages. A significant red-shift in light absorbance, largely improved charge separation efficiency, and an increase in hydrophilicity triggered by protonation of the Schiff-base moieties in the imine-linked COFs, are responsible for the improved photocatalytic performance.

Reduction and oxidation of Au adatoms on the CeO2(111) surface - DFT+U versus hybrid functionals.

Recently we showed that Au atoms may titrate Ce3+ ions in near-surface layers of reduced CeO2(111). This surface contained oxygen vacancies in subsurface position within the topmost O-Ce-O trilayer [Pan et al., Phys. Rev. Lett., 2013, 111, 206101.]. The present work builds upon these findings and discusses additional results obtained using PBE+U and hybrid functionals. These approaches do not predict the same relative stabilities for the various adsorption sites of a single Au adatom at an O-defect concentration of a » ML or 1.984 nm-2. We attribute this discrepancy to a different alignment within the O 2p-Ce 4f gap, i.e. a different order by energy of partially occupied Ce 4f and Au 6s orbitals. The energy offset of these orbitals matters, because the adsorption of Au0(6s1) atop Ce3+(4f1) or atop a subsurface oxygen atom in the first coordination shell of a Ce3+(4f1) involves creation of Au-(6s2) and Ce4+(4f0) ions. The electron transfer to Au is coupled to stabilizing ionic relaxation in the lattice, commonly known as polaronic distortion, reinforcing the Au-Ce bond. The order of 4f and 6s orbitals depends on the density functional approximation and is also strongly influenced by the oxygen defect concentration.

Erratum: Titration of Ce

This corrects the article DOI: 10.1103/PhysRevLett.111.206101.

Titration of Ce3+ ions in the CeO2(111) surface by Au adatoms.

The role of surface and subsurface O vacancies for gold adsorption on crystalline CeO2(111) films has been investigated by scanning tunneling microscopy and density functional theory. Whereas surface vacancies serve as deep traps for the Au atoms, subsurface defects promote the formation of characteristic Au pairs with a mean atom distance of two ceria lattice constants (7.6 Å). Hybrid density functional theory calculations reveal that the pair formation arises from a titration of the two Ce3+ ions generated by a single O vacancy. The Au-Ce3+ bond forms due to a strain effect, as the associated charge transfer from the spacious Ce3+ into the adgold enables a substantial relaxation of the ceria lattice. Also the experimentally determined Au-pair length is reproduced in the calculations, as we find a Ce3+-Ce3+ spacing of two ceria lattice parameters to be energetically preferred. Single Au atoms can thus be taken as position markers for Ce3+ ion pairs in the surface, providing unique information on electron-localization phenomena in reduced ceria.

Band Gap Engineering in Two-Dimensional Materials by Functionalization: Methylation of Graphene and Graphene Bilayers.

Graphene is well-known for its unique combination of electrical and mechanical properties. However, its vanishing band gap limits the use of graphene in microelectronics. Covalent functionalization of graphene has been a common approach to address this critical issue and introduce a band gap. In this Article, we systematically analyze the functionalization of single-layer graphene (SLG) and bilayer graphene (BLG) with methyl (CH3) using periodic density functional theory (DFT) at the PBE+D3 level of theory. We also include a comparison of methylated single-layer and bilayer graphene, as well as a discussion of different methylation options (radicalic, cationic, and anionic). For SLG, methyl coverages ranging from 1/8 to 1/1, (i.e., the fully methylated analogue of graphane) are considered. We find that up to a coverage θ of 1/2, graphene readily accepts CH3, with neighbor CH3 groups preferring trans positions. Above θ = 1/2, the tendency to accept further CH3 weakens and the lattice constant increases. The band gap behaves less regularly, but overall it increases with increasing methyl coverage. Thus, methylated graphene shows potential for developing band gap-tuned microelectronics devices and may offer further functionalization options. To guide in the interpretation of methylation experiments, vibrational signatures of various species are characterized by normal-mode analysis (NMA), their vibrational density of states (VDOS), and infrared (IR) spectra, the latter two are obtained from ab initio molecular dynamics (AIMD) in combination with a velocity-velocity autocorrelation function (VVAF) approach.

Femtosecond Electron-Transfer Dynamics across the D2O/Cs+/Cu(111) Interface: The Impact of Hydrogen Bonding.

Hydrogen bonding is essential in electron-transfer processes at water-electrode interfaces. We study the impact of the H-bonding of water as a solvent molecule on real-time electron-transfer dynamics across a Cs+-Cu(111) ion-metal interface using femtosecond time-resolved two-photon photoelectron spectroscopy. We distinguish in the formed water-alkali aggregates two regimes below and above two water molecules per ion. Upon crossing the boundary of these regimes, the lifetime of the excess electron localized transiently at the Cs+ ion increases from 40 to 60 fs, which indicates a reduced alkali-metal interaction. Furthermore, the energy transferred to a dynamic structural rearrangement due to hydration is reduced from 0.3 to 0.2 eV concomitantly. These effects are a consequence of H-bonding in the water-water interaction and the beginning formation of a nanoscale water network. This finding is supported by real-space imaging of the solvatomers and vibrational frequency shifts of the OH stretching and bending modes calculated for these specific interfaces.

Constitutional isomerism of the linkages in donor-acceptor covalent organic frameworks and its impact on photocatalysis.

When new covalent organic frameworks (COFs) are designed, the main efforts are typically focused on selecting specific building blocks with certain geometries and properties to control the structure and function of the final COFs. The nature of the linkage (imine, boroxine, vinyl, etc.) between these building blocks naturally also defines their properties. However, besides the linkage type, the orientation, i.e., the constitutional isomerism of these linkages, has rarely been considered so far as an essential aspect. In this work, three pairs of constitutionally isomeric imine-linked donor-acceptor (D-A) COFs are synthesized, which are different in the orientation of the imine bonds (D-C=N-A (DCNA) and D-N=C-A (DNCA)). The constitutional isomers show substantial differences in their photophysical properties and consequently in their photocatalytic performance. Indeed, all DCNA COFs show enhanced photocatalytic H2 evolution performance than the corresponding DNCA COFs. Besides the imine COFs shown here, it can be concluded that the proposed concept of constitutional isomerism of linkages in COFs is quite universal and should be considered when designing and tuning the properties of COFs.

Stability and migration barriers of small vanadium oxide clusters on the CeO2(111) surface studied by density functional theory.

By virtue of periodic density functional theory, we investigate structure and thermodynamic stability of (VO)k and (VO2)k (k = 1, 2, 3) clusters deposited on the CeO2(111) surface, which serve as models for the very active sub-monolayer vanadia catalyst on a ceria support. We find V always completely oxidized (oxidation state +5) and coordinated to four O atoms. As a consequence, Ce4+ is (partially) reduced to Ce3+. Thus, localized Ce-4f states are populated, which requires an onsite U-term (PBE+U) to avoid over-delocalization off-electrons. Importantly, trimers of VO2 were found to be extraordinarily stable (agglomeration energy: -1.68 eV), whereas aggregation of VO species on CeO2(111) is thermodynamically clearly unfavourable (agglomeration energy: 3.45 eV). As a consequence a large area of the VnOm phase diagram (for relevant temperatures) is dominated by the VO2 trimer. The latter is less active towards reduction/oxidation than the active monomer and dimer of VO2, which are not present in the phase diagram at all, although directly observed by recent STM measurements. This suggests that kinetic effects hinder VO2 to grow into larger oligomers. The lowest migration energy barrier we found is as high as 1.95 eV, which indicates that adsorbed monomeric VO2 is "kinetically locked" at low temperatures and explains why monomers are stabilized on the ceria surface.