Stretchable Tissue-Like Gold Nanowire Composites with Long-Term Stability for Neural Interfaces.

Soft and stretchable nanocomposites can match the mechanical properties of neural tissue, thereby minimizing foreign body reactions to provide optimal stimulation and recording specificity. Soft materials for neural interfaces should simultaneously fulfill a wide range of requirements, including low Young's modulus (<<1 MPa), stretchability (≥30%), high conductivity (>> 1000 S cm-1), biocompatibility, and chronic stability (>> 1 year). Current nanocomposites do not fulfill the above requirements, in particular not the combination of softness and high conductivity. Here, this challenge is addressed by developing a scalable and robust synthesis route based on polymeric reducing agents for smooth, high-aspect ratio gold nanowires (AuNWs) of controllable dimensions with excellent biocompatibility. AuNW-silicone composites show outstanding performance with nerve-like softness (250 kPa), high conductivity (16 000 S cm-1), and reversible stretchability. Soft multielectrode cuffs based on the composite achieve selective functional stimulation, recordings of sensory stimuli in rat sciatic nerves, and show an accelerated lifetime stability of >3 years. The scalable synthesis method provides a chemically stable alternative to the widely used AgNWs, thereby enabling new applications within electronics, biomedical devices, and electrochemistry.

Elucidating fungal decomposition of organic matter at sub-micrometer spatial scales using optical photothermal infrared (O-PTIR) microspectroscopy.

In microbiological studies, a common goal is to link environmental factors to microbial activities. Both environmental factors and microbial activities are typically derived from bulk samples. It is becoming increasingly clear that such bulk environmental parameters poorly represent the microscale environments microorganisms experience. Using infrared (IR) microspectroscopy, the spatial distribution of chemical compound classes can be visualized, making it a useful tool for studying the interactions between microbial cells and their microenvironments. The spatial resolution of conventional IR microspectroscopy has been limited by the diffraction limit of IR light. The recent development of optical photothermal infrared (O-PTIR) microspectroscopy has pushed the spatial resolution of IR microspectroscopy beyond this diffraction limit, allowing the distribution of chemical compound classes to be visualized at sub-micrometer spatial scales. To examine the potential and limitations of O-PTIR microspectroscopy to probe the interactions between fungal cells and their immediate environments, we imaged the decomposition of cellulose films by cells of the ectomycorrhizal fungus Paxillus involutus and compared O-PTIR results using conventional IR microspectroscopy. Whereas the data collected with conventional IR microspectroscopy indicated that P. involutus has only a very limited ability to decompose cellulose films, O-PTIR data suggested that the ability of P. involutus to decompose cellulose was substantial. Moreover, the O-PTIR method enabled the identification of a zone located outside the fungal hyphae where the cellulose was decomposed by oxidation. We conclude that O-PTIR can provide valuable new insights into the abilities and mechanisms by which microorganisms interact with their surrounding environments.IMPORTANCEInfrared (IR) microspectroscopy allows the spatial distribution of chemical compound classes to be visualized. The use of conventional IR microspectroscopy in microbiological studies has been restricted by limited spatial resolution. Recent developments in laser technology have enabled a new class of IR microspectroscopy instruments to be developed, pushing the spatial resolution beyond the diffraction limit of IR light to approximately 500 nm. This improved spatial resolution now allows microscopic observations of changes in chemical compounds to be made, making IR microspectroscopy a useful tool to investigate microscale changes in chemistry that are caused by microbial activity. We show these new possibilities using optical photothermal infrared microspectroscopy to visualize the changes in cellulose substrates caused by oxidation by the ectomycorrhizal fungus Paxillus involutus at the interface between individual fungal hyphae and cellulose substrates.

Cathodoluminescence investigations of dark-line defects in platelet-based InGaN nano-LED structures.

We have investigated the optical properties of heterostructured InGaN platelets aiming at red emission, intended for use as nano-scaled light-emitting diodes. The focus is on the presence of non-radiative emission in the form of dark line defects. We have performed the study using hyperspectral cathodoluminescence imaging. The platelets were grown on a template consisting of InGaN pyramids, flattened by chemical mechanical polishing. These templates are defect free, whereas the dark line defects are introduced in the lower barrier and tend to propagate through all the subsequent layers, as revealed by the imaging of different layers in the structure. We conclude that the dark line defects are caused by stacking mismatch boundaries introduced by multiple seeding and step bunching at the edges of the as-polished, dome shaped templates. To avoid these defects, we suggest that the starting material must be flat rather than dome shaped.

Airway pressure release ventilation (APRV) versus pressure support ventilation (PSV)-A prospective intervention trial comparing haemodynamic parameters in intensive care patients.

BACKGROUND AND AIM: Assisted mechanical ventilation may alter the pressure profile in the thorax compared to normal breathing, which can affect the blood flow to and from the heart. Studies suggest that in patients with severe lung disease, airway pressure release ventilation (APRV) may be haemodynamically beneficial compared to other ventilator settings. The primary aim of this study was to investigate if APRV affects cardiac index in intubated intensive care patients without severe lung disease when compared to pressure support ventilation (PSV). The secondary aim comprised potential changes in other haemodynamic and ventilatory parameters. METHODS: Twenty patients were enrolled in the intensive care unit (ICU) at Sahlgrenska University Hospital. Eligible patients met the inclusion criteria; 18 years of age or above, intubated and mechanically ventilated, triggering and stable on PSV mode, with indwelling haemodynamic monitoring via a pulse-induced continuous cardiac output (PiCCO) catheter. The study protocol started with a 30-min interval on PSV mode, followed by a 30-min interval on APRV mode, and finally a 30-min interval back on PSV mode. At the end of each interval, PiCCO outputs, ventilator outputs, arterial and venous blood gas analyses, heart rate and central venous pressure were recorded and compared between modes. RESULTS: There was no significant difference in cardiac index (3.42 vs. 3.39 L/min/m2) between PSV and APRV, but a significant increase in central venous pressure (+1.0 mmHg, p = .027). Furthermore, we found a significant reduction in peak airway pressure (-3.16 cmH2O, p < .01) and an increase in mean airway pressure (+2.1 cmH2O, p < .01). No statistically significant change was found in oxygenation index (partial pressure of O2 [pO2]/fraction of inspired oxygen) nor in other secondary outcomes when comparing PSV and APRV. There was no significant association between global end-diastolic volume index and cardiac index (R2 = 0.0089) or central venous pressure (R2 = 0.278). All parameters returned to baseline after switching the ventilator mode back to PSV. CONCLUSION: We could not detect any changes in cardiac index in ICU patients without severe lung disease during APRV compared to PSV mode, despite lower peak airway pressure and increased mean airway pressure.

Hirayama's disease associated with cervical deformity and spinal cord compression: a case report from Sweden.

BACKGROUND: Hirayama's disease (HD) is most common in young males, and previous studies are predominantly from Asian countries. The cause of HD is unknown but the most common theory about the pathology speculates on forward bending that causes a compression of the dura mater and the anterior horn of the spinal cord against the vertebra during an overstretch flexion that may result in myelopathy. Both anterior and posterior cervical surgical approaches have been shown to be effective in stopping the disease and improving function; however, HD is also reported to be a self-limited disease, and treatment with a cervical collar may be an alternative for these patients. CASE REPORT: We report HD in a 17-year-old male from Sweden who underwent surgical treatment with a 2 level anterior cervical discectomy and fusion (ACDF) due to neurological progression from HD after conservative treatment. CONCLUSION: HD is rare and is easily overlooked. Surgical intervention shows promising results for neurological progression, but HD is also reported to be a self-limited disease.

Experimental and Theoretical Investigations of Out-of-Plane Ordered Nanolaminate Transition Metal Borides: M4CrSiB2 (M = Mo, W, Nb).

We report the synthesis of three out-of-plane chemically ordered quaternary transition metal borides (o-MAB phases) of the chemical formula M4CrSiB2 (M = Mo, W, Nb). The addition of these phases to the recently discovered o-MAB phase Ti4MoSiB2 shows that this is indeed a new family of chemically ordered atomic laminates. Furthermore, our results expand the attainable chemistry of the traditional M5SiB2 MAB phases to also include Cr. The crystal structure and chemical ordering of the produced materials were investigated using high-resolution scanning transmission electron microscopy and X-ray diffraction by applying Rietveld refinement. Additionally, calculations based on density functional theory were performed to investigate the Cr preference for occupying the minority 4c Wyckoff site, thereby inducing chemical order.

Multielemental single-atom-thick A layers in nanolaminated V2(Sn, A) C (A = Fe, Co, Ni, Mn) for tailoring magnetic properties.

Tailoring of individual single-atom-thick layers in nanolaminated materials offers atomic-level control over material properties. Nonetheless, multielement alloying in individual atomic layers in nanolaminates is largely unexplored. Here, we report 15 inherently nanolaminated V2(A xSn1-x)C (A = Fe, Co, Ni, Mn, and combinations thereof, with x ∼ 1/3) MAX phases synthesized by an alloy-guided reaction. The simultaneous occupancy of the 4 magnetic elements and Sn in the individual single-atom-thick A layers constitutes high-entropy MAX phase in which multielemental alloying exclusively occurs in the 2-dimensional (2D) A layers. V2(A xSn1-x)C exhibit distinct ferromagnetic behavior that can be compositionally tailored from the multielement A-layer alloying. Density functional theory and phase diagram calculations are performed to understand the structure stability of these MAX phases. This 2D multielemental alloying approach provides a structural design route to discover nanolaminated materials and expand their chemical and physical properties. In fact, the magnetic behavior of these multielemental MAX phases shows strong dependency on the combination of various elements.

X-Ray Scattering Reveals Two Mechanisms of Cellulose Microfibril Degradation by Filamentous Fungi.

Mushroom-forming fungi (Agaricomycetes) employ enzymatic and nonenzymatic cellulose degradation mechanisms, the latter presumably relying on Fenton-generated radicals. The effects of the two mechanisms on the cellulose microfibrils structure remain poorly understood. We examined cellulose degradation caused by litter decomposers and wood decomposers, including brown-rot and white-rot fungi and one fungus with uncertain wood decay type, by combining small- and wide-angle X-ray scattering. We also examined the effects of commercial enzymes and Fenton-generated radicals on cellulose using the same method. We detected two main degradation or modification mechanisms. The first characterized the mechanism used by most fungi and resembled enzymatic cellulose degradation, causing simultaneous microfibril thinning and decreased crystalline cellulose. The second mechanism was detected in one brown-rot fungus and one litter decomposer and was characterized by patchy amorphogenesis of crystalline cellulose without substantial thinning of the fibers. This pattern did not resemble the effect of Fenton-generated radicals, suggesting a more complex mechanism is involved in the destruction of cellulose crystallinity by fungi. Furthermore, our results showed a mismatch between decay classifications and cellulose degradation patterns and that even within litter decomposers two degradation mechanisms were found, suggesting higher functional diversity under current ecological classifications of fungi. IMPORTANCE Cellulose degradation by fungi plays a fundamental role in terrestrial carbon cycling, but the mechanisms by which fungi cope with the crystallinity of cellulose are not fully understood. We used X-ray scattering to analyze how fungi, a commercial enzyme mix, and a Fenton reaction-generated radical alter the crystalline structure of cellulose. Our data revealed two mechanisms involved in crystalline cellulose degradation by fungi: one that results in the thinning of the cellulose fibers, resembling the enzymatic degradation of cellulose, and one that involves amorphogenesis of crystalline cellulose by yet-unknown pathways, resulting in a patchy-like degradation pattern. These results pave the way to a deeper understanding of cellulose degradation and the development of novel ways to utilize crystalline cellulose.

A widespread mechanism in ectomycorrhizal fungi to access nitrogen from mineral-associated proteins.

A large fraction of nitrogen (N) in forest soils is present in mineral-associated proteinaceous compounds. The strong association between proteins and minerals limits microbial accessibility to this source, which is a relatively stable reservoir of soil N. We have shown that the ectomycorrhizal (ECM) fungus Paxillus involutus can acquire N from iron oxide-associated proteins. Using tightly controlled isotopic, spectroscopic and chromatographic experiments, we demonstrated that the capacity to access N from iron oxide-associated bovine serum albumin (BSA) is shared with the ECM fungi Hebeloma cylindrosporum and Piloderma olivaceum. Despite differences in evolutionary history, growth rates, exploration types and the decomposition mechanisms of organic matter, their N acquisition mechanisms were similar to those described for P. involutus. The fungi released N from mineral-associated BSA by direct action of extracellular aspartic proteases on the mineral-associated BSA, without initial desorption of the protein. Hydrolysis was suppressed by the adsorption of proteases to minerals, but this adverse effect was counteracted by the secretion of compounds that conditioned the mineral surface. These data suggest that the enzymatic exudate-driven mechanism to access N from mineral-associated proteins is found in ECM fungi of multiple lineages and exploration types.

A general Lewis acidic etching route for preparing MXenes with enhanced electrochemical performance in non-aqueous electrolyte.

Two-dimensional carbides and nitrides of transition metals, known as MXenes, are a fast-growing family of materials that have attracted attention as energy storage materials. MXenes are mainly prepared from Al-containing MAX phases (where A = Al) by Al dissolution in F-containing solution; most other MAX phases have not been explored. Here a redox-controlled A-site etching of MAX phases in Lewis acidic melts is proposed and validated by the synthesis of various MXenes from unconventional MAX-phase precursors with A elements Si, Zn and Ga. A negative electrode of Ti3C2 MXene material obtained through this molten salt synthesis method delivers a Li+ storage capacity of up to 738 C g-1 (205 mAh g-1) with high charge-discharge rate and a pseudocapacitive-like electrochemical signature in 1 M LiPF6 carbonate-based electrolyte. MXenes prepared via this molten salt synthesis route may prove suitable for use as high-rate negative-electrode materials for electrochemical energy storage applications.

Theoretical Prediction and Synthesis of a Family of Atomic Laminate Metal Borides with In-Plane Chemical Ordering.

All atomically laminated MAB phases (M = transition metal, A = A-group element, and B = boron) exhibit orthorhombic or tetragonal symmetry, with the only exception being hexagonal Ti2InB2. Inspired by the recent discovery of chemically ordered hexagonal carbides, i-MAX phases, we perform an extensive first-principles study to explore chemical ordering upon metal alloying of M2AlB2 (M from groups 3 to 9) in orthorhombic and hexagonal symmetry. Fifteen stable novel phases with in-plane chemical ordering are identified, coined i-MAB, along with 16 disordered stable alloys. The predictions are verified through the powder synthesis of Mo4/3Y2/3AlB2 and Mo4/3Sc2/3AlB2 of space group R3̅m (no. 166), displaying the characteristic in-plane chemical order of Mo and Y/Sc and Kagomé ordering of the Al atoms, as evident from X-ray diffraction and electron microscopy. The discovery of i-MAB phases expands the elemental space of these borides with M = Sc, Y, Zr, Hf, and Nb, realizing an increased property tuning potential of these phases as well as their suggested potential two-dimensional derivatives.

Blood flow imaging by optimal matching of computational fluid dynamics to 4D-flow data.

PURPOSE: Three-dimensional, time-resolved blood flow measurement (4D-flow) is a powerful research and clinical tool, but improved resolution and scan times are needed. Therefore, this study aims to (1) present a postprocessing framework for optimization-driven simulation-based flow imaging, called 4D-flow High-resolution Imaging with a priori Knowledge Incorporating the Navier-Stokes equations and the discontinuous Galerkin method (4D-flow HIKING), (2) investigate the framework in synthetic tests, (3) perform phantom validation using laser particle imaging velocimetry, and (4) demonstrate the use of the framework in vivo. METHODS: An optimizing computational fluid dynamics solver including adjoint-based optimization was developed to fit computational fluid dynamics solutions to 4D-flow data. Synthetic tests were performed in 2D, and phantom validation was performed with pulsatile flow. Reference velocity data were acquired using particle imaging velocimetry, and 4D-flow data were acquired at 1.5 T. In vivo testing was performed on intracranial arteries in a healthy volunteer at 7 T, with 2D flow as the reference. RESULTS: Synthetic tests showed low error (0.4%-0.7%). Phantom validation showed improved agreement with laser particle imaging velocimetry compared with input 4D-flow in the horizontal (mean -0.05 vs -1.11 cm/s, P < .001; SD 1.86 vs 4.26 cm/s, P < .001) and vertical directions (mean 0.05 vs -0.04 cm/s, P = .29; SD 1.36 vs 3.95 cm/s, P < .001). In vivo data show a reduction in flow rate error from 14% to 3.5%. CONCLUSIONS: Phantom and in vivo results from 4D-flow HIKING show promise for future applications with higher resolution, shorter scan times, and accurate quantification of physiological parameters.

Nitrogen acquisition from mineral-associated proteins by an ectomycorrhizal fungus.

In nitrogen (N)-limited boreal forests, trees depend on the decomposing activity of their ectomycorrhizal (ECM) fungal symbionts to access soil N. A large fraction of this N exists as proteinaceous compounds associated with mineral particles. However, it is not known if ECM fungi can access these mineral-associated proteins; accordingly, possible acquisition mechanisms have not been investigated. With tightly controlled isotopic, spectroscopic, and chromatographic experiments, we quantified and analyzed the mechanisms of N acquisition from iron oxide mineral-associated proteins by Paxillus involutus, a widespread ECM fungus in boreal forests. The fungus acquired N from the mineral-associated proteins. The collective results indicated a proteolytic mechanism involving formation of the crucial enzyme-substrate complexes at the mineral surfaces. Hence, the enzymes hydrolyzed the mineral-associated proteins without initial desorption of the proteins. The proteolytic activity was suppressed by adsorption of proteases to the mineral particles. This process was counteracted by fungal secretion of mineral-surface-reactive compounds that decreased the protease-mineral interactions and thereby promoted the formation of enzyme-substrate complexes. The ability of ECM fungi to simultaneously generate extracellular proteases and surface-reactive metabolites suggests that they can play an important role in unlocking the large N pool of mineral-associated proteins to trees in boreal forests.

Proteolysis of Iron Oxide-Associated Bovine Serum Albumin.

Proteins are a substantial nitrogen source in soils provided that they can be hydrolyzed into bioavailable small peptides or amino acids. However, the strong associations between proteins and soil minerals restrict such proteolytic reactions. This study focused on how an extracellular fungal protease (Rhizopus sp.) hydrolyzed iron oxide-associated bovine serum albumin (BSA) and the factors that affected the proteolysis. We combined batch experiments with size-exclusion and reversed phase liquid chromatography and in situ infrared spectroscopic measurements to monitor the generation of proteolytic products in solution as well as the real-time changes of the adsorbed BSA during 24 h. Results showed that protease hydrolyzed the iron oxide-associated BSA directly at the surface without an initial desorption of BSA. Concurrently, the protease was adsorbed to vacant surface sites at the iron oxides, which significantly slowed down the rate of proteolysis. This inhibiting effect was counteracted by the presence of preadsorbed phosphate or by increasing the BSA coverage, which prevented protease adsorption. Fast initial rates of iron oxide-associated BSA proteolysis, comparable to proteolysis of BSA in solution, and very slow rates at prolonged proteolysis suggest a large variability in mineral-associated proteins as a nitrogen source in soils and that only a fraction of the protein is bioavailable.

Transpulmonary driving pressure during mechanical ventilation-validation of a non-invasive measurement method.

BACKGROUND: Transpulmonary driving pressure plays an important role in today's understanding of ventilator induced lung injury. We have previously validated a novel non-invasive method based on stepwise increments of PEEP to assess transpulmonary driving pressure in anaesthetised patients with healthy lungs. The aim of this study was to validate the method in patients who were mechanically ventilated for different diagnoses requiring intensive care. METHODS: We measured transpulmonary pressure (Ptp) and calculated transpulmonary driving pressure (ΔPtp) in 31 patients undergoing mechanical ventilation in an intensive care unit. Parallel triplicate measurements were performed with the PEEP step method (PtpPSM) and the conventional oesophageal balloon method (Ptpconv). Their agreement was compared using the intraclass correlation coefficient (ICC) and the Bland Altman plot. RESULT: The coefficient of variation for the repeated measurements was 4,3 for ΔPtpPSM and 9,2 for ΔPtpconv. The ICC of 0,864 and the Bland Altman plot indicate good agreement between the two methods. CONCLUSION: The non-invasive method can be applied in mechanically ventilated patients to measure transpulmonary driving pressure with good repeatability and accuracy comparable to the traditional oesophageal balloon method.

Element Replacement Approach by Reaction with Lewis Acidic Molten Salts to Synthesize Nanolaminated MAX Phases and MXenes.

Nanolaminated materials are important because of their exceptional properties and wide range of applications. Here, we demonstrate a general approach to synthesizing a series of Zn-based MAX phases and Cl-terminated MXenes originating from the replacement reaction between the MAX phase and the late transition-metal halides. The approach is a top-down route that enables the late transitional element atom (Zn in the present case) to occupy the A site in the pre-existing MAX phase structure. Using this replacement reaction between the Zn element from molten ZnCl2 and the Al element in MAX phase precursors (Ti3AlC2, Ti2AlC, Ti2AlN, and V2AlC), novel MAX phases Ti3ZnC2, Ti2ZnC, Ti2ZnN, and V2ZnC were synthesized. When employing excess ZnCl2, Cl-terminated MXenes (such as Ti3C2Cl2 and Ti2CCl2) were derived by a subsequent exfoliation of Ti3ZnC2 and Ti2ZnC due to the strong Lewis acidity of molten ZnCl2. These results indicate that A-site element replacement in traditional MAX phases by late transition-metal halides opens the door to explore MAX phases that are not thermodynamically stable at high temperature and would be difficult to synthesize through the commonly employed powder metallurgy approach. In addition, this is the first time that exclusively Cl-terminated MXenes were obtained, and the etching effect of Lewis acid in molten salts provides a green and viable route to preparing MXenes through an HF-free chemical approach.

Influence of Ammonium on Formation of Mineral-Associated Organic Carbon by an Ectomycorrhizal Fungus.

The interactions between dissolved organic matter (DOM) and mineral particles are critical for the stabilization of soil organic matter (SOM) in terrestrial ecosystems. The processing of DOM by ectomycorrhizal fungi contributes to the formation of mineral-stabilized SOM by two contrasting pathways: the extracellular transformation of DOM (ex vivo pathway) and the secretion of mineral-surface-reactive metabolites (in vivo pathway). In this study, we examined how changes in nitrogen (N) availability affected the formation of mineral-associated carbon (C) from these two pathways. DOM was extracted from forest soils. The processing of this DOM by the ectomycorrhizal fungus Paxillus involutus was examined in laboratory-scale studies with different levels of ammonium. At low levels of ammonium (i.e., under N-limited conditions), the DOM components were slightly oxidized, and fungal C metabolites with iron-reducing activity were secreted. Ammonium amendments decreased the amount of C metabolites, and no additional oxidation of the organic matter was detected. In contrast, the hydrolytic activity and the secretion of N-containing compounds increased, particularly when high levels of ammonium were added. Under these conditions, C, but not N, limited fungal growth. Although the overall production of mineral-associated organic C was not affected by ammonium concentrations, the observed shifts in the activities of the ex vivo and in vivo pathways affected the composition of organic matter adsorbed onto the mineral particles. Such changes will affect the properties of organic matter-mineral associations and, thus, ultimately, the stabilization of SOM.IMPORTANCE Nitrogen (N) availability plays a critical role in the cycling and storage of soil organic matter (SOM). However, large uncertainties remain in predicting the net effect of N addition on soil organic carbon (C) storage due to the complex interactions between organic matter, microbial activity, and mineral particles that determine the formation of stable SOM. Here, we attempted to disentangle the effects of ammonium on these interactions in controlled microcosm experiments including the ectomycorrhizal fungus P.involutus and dissolved organic matter extracted from forest soils. Increased ammonium levels affected the fungal processing of the organic material as well as the secretion of extracellular metabolites. Although ammonium additions did not increase the net production of mineral-adsorbed C, changes in the decomposition and secretion pathways altered the composition of the adsorbed organic matter. These changes may influence the properties of the organic matter-mineral associations and, thus, the stabilization of SOM.

Detailed measurements of oesophageal pressure during mechanical ventilation with an advanced high-resolution manometry catheter.

BACKGROUND: Oesophageal pressure (PES) is used for calculation of lung and chest wall mechanics and transpulmonary pressure during mechanical ventilation. Measurements performed with a balloon catheter are suggested as a basis for setting the ventilator; however, measurements are affected by several factors. High-resolution manometry (HRM) simultaneously measures pressures at every centimetre in the whole oesophagus and thereby provides extended information about oesophageal pressure. The aim of the present study was to evaluate the factors affecting oesophageal pressure using HRM. METHODS: Oesophageal pressure was measured using a high-resolution manometry catheter in 20 mechanically ventilated patients (15 in the ICU and 5 in the OR). Different PEEP levels and different sizes of tidal volume were applied while pressures were measured continuously. In 10 patients, oesophageal pressure was also measured using a conventional balloon catheter for comparison. A retrospective analysis of oesophageal pressure measured with HRM in supine and sitting positions in 17 awake spontaneously breathing patients is also included. RESULTS: HRM showed large variations in end-expiratory PES (PESEE) and tidal changes in PES (ΔPES) along the oesophagus. Mean intra-individual difference between the minimum and maximum end-expiratory oesophageal pressure (PESEE at baseline PEEP) and tidal variations in oesophageal pressure (ΔPES at tidal volume 6 ml/kg) recorded by HRM in the different sections of the oesophagus was 23.7 (7.9) cmH2O and 7.6 (3.9) cmH2O respectively. Oesophageal pressures were affected by tidal volume, level of PEEP, part of the oesophagus included and patient positioning. HRM identified simultaneous increases and decreases in PES within a majority of individual patients. Compared to sitting position, supine position increased PESEE (mean difference 12.3 cmH2O), pressure variation within individual patients and cardiac artefacts. The pressure measured with a balloon catheter did not correspond to the average pressure measured with HRM within the same part of the oesophagus. CONCLUSIONS: The intra-individual variability in PESEE and ΔPES is substantial, and as a result, the balloon on the conventional catheter is affected by many different pressures along its length. Oesophageal pressures are not only affected by lung and chest wall mechanics but are a complex product of many factors, which is not obvious during conventional measurements. For correct calculations of transpulmonary pressure, factors influencing oesophageal pressures need to be known. HRM, which is available at many hospitals, can be used to increase the knowledge concerning these factors. TRIAL REGISTRATION: ClinicalTrials.gov, NCT02901158.

Tailoring Structure, Composition, and Energy Storage Properties of MXenes from Selective Etching of In-Plane, Chemically Ordered MAX Phases.

The exploration of 2D solids is one of our time's generators of materials discoveries. A recent addition to the 2D world is MXenes that possses a rich chemistry due to the large parent family of MAX phases. Recently, a new type of atomic laminated phases (coined i-MAX) is reported, in which two different transition metal atoms are ordered in the basal planes. Herein, these i-MAX phases are used in a new route for tailoriong the MXene structure and composition. By employing different etching protocols to the parent i-MAX phase (Mo2/3 Y1/3 )2 AlC, the resulting MXene can be either: i) (Mo2/3 Y1/3 )2 C with in-plane elemental order through selective removal of Al atoms or ii) Mo1.33 C with ordered vacancies through selective removal of both Al and Y atoms. When (Mo2/3 Y1/3 )2 C (ideal stoichiometry) is used as an electrode in a supercapacitor-with KOH electrolyte-a volumetric capacitance exceeding 1500 F cm-3 is obtained, which is 40% higher than that of its Mo1.33 C counterpart. With H2 SO4 , the trend is reversed, with the latter exhibiting the higher capacitance (≈1200 F cm-3 ). This additional ability for structural tailoring will indubitably prove to be a powerful tool in property-tailoring of 2D materials, as exemplified here for supercapacitors.

Fenton reaction facilitates organic nitrogen acquisition by an ectomycorrhizal fungus.

Boreal trees rely on their ectomycorrhizal fungal symbionts to acquire growth-limiting nutrients, such as nitrogen (N), which mainly occurs as proteins complexed in soil organic matter (SOM). The mechanisms for liberating this N are unclear as ectomycorrhizal fungi have lost many genes encoding lignocellulose-degrading enzymes present in their saprotrophic ancestors. We hypothesized that hydroxyl radicals (˙ OH), produced by the ectomycorrhizal fungus Paxillus involutus during growth on SOM, are involved in liberating organic N. Paxillus involutus was grown for 7 d on N-containing or N-free substrates that represent major organic compounds of SOM. ˙ OH production, ammonium assimilation, and proteolytic activity were measured daily. ˙ OH production was strongly induced when P. involutus switched from ammonium to protein as the main N source. Extracellular proteolytic activity was initiated shortly after the oxidation. Oxidized protein substrates induced higher proteolytic activity than unmodified proteins. Dynamic modeling predicted that ˙ OH production occurs in a burst, regulated mainly by ammonium and ferric iron concentrations. We propose that the production of ˙ OH and extracellular proteolytic enzymes are regulated by similar nutritional signals. Oxidation works in concert with proteolysis, improving N liberation from proteins in SOM. Organic N mining by ectomycorrhizal fungi has, until now, only been attributed to proteolysis.