Preliminary Air Quality and Microclimatic Conditions Study in the Santuario della Beata Vergine dei Miracoli in Saronno (VA).

In the present work, the microclimatic conditions (temperature (T), relative humidity (RH), and illuminance (I)), together with the air quality (both aerosol particulate matter (PM) and gaseous pollutants), were monitored to evaluate the environmental conditions inside the Santuario della Beata Vergine dei Miracoli in Saronno (VA), a masterpiece of the Italian Renaissance. For this purpose, dataloggers were used to carry out the T, RH, and I measurements, whereas an optical particle counter (OPC) was employed to perform the particle count and determine the concentration of the aerosol PM. Finally, diffusive passive samplers were used to determine the concentration of nitrogen dioxide (NO2) and BTEX (benzene, toluene, ethylbenzene, and xylenes). To identify possible spatial variations, the studies were conducted at different sites and different heights in the Sanctuary. Particular focus was given to the Easter week during which liturgical services attracting large numbers of people were carried out. Additionally, a comparison with the outdoor values was performed to highlight the accumulation phenomena and other variations in the concentrations of the species. Despite the indoor concentrations of pollutants and variations in the thermohygrometric parameters being generally lower compared to the outdoors (e.g., 5.2-15.0 µg m-3 versus 17.7-45.3 µg m-3 for NO2), the microclimatic conditions were often not in line with the Italian legislation and technical standards.

Development and Improvement of an Effective Method for Air and Surfaces Disinfection with Ozone Gas as a Decontaminating Agent.

Background and objectives: Ozone has been one of the most investigated and discussed sanitization methods. This paper reports a procedure to sanitize air hospital environments, in particular chirurgical surgery rooms that require high levels of disinfection. The purpose of this work was the development and implementation of a cleansing and sanitizing procedure for critical clinical settings with ozone, to prevent hospital infections by the elimination of all toxic and harmful microorganisms in the air, and ensure safe use for operators and patients. Materials and Methods: The protocol for the study involved a structured selection of a representative environment of healthcare structures such as high, medium, and low-risk settings in air and examples of hospital furniture. Results: The concentration of ozone was measured during sanitization treatment and the estimation of the total microbial count in the air and on different surfaces before and after the sanitization operations was performed. The results demonstrated a significant reduction in the microbial count that always fell below the threshold value. Conclusions: Currently, there are no air treatment strategies available for inactivating airborne organisms during hospital outbreaks, which is most probably due to the lack of approved protocols.

Determination of the 13C/12C Carbon Isotope Ratio in Carbonates and Bicarbonates by 13C NMR Spectroscopy.

This paper is the first study focused on the innovative application of 13C NMR (nuclear magnetic resonance) spectroscopy to determine the bulk 13C/12C carbon isotope ratio, at natural abundance, in inorganic carbonates and bicarbonates. In the past, 13C NMR spectroscopy (irm-13C NMR) was mainly used to measure isotope ratio monitoring with the potential of conducting 13C position-specific isotope analysis of organic molecules with high precision. The reliability of the newly developed methodology for the determination of stable carbon isotope ratio was evaluated in comparison with the method chosen in the past for these measurements, i.e., isotope ratio mass spectrometry (IRMS), with very encouraging results. We determined the 13C/12C ratio of carbonates and bicarbonates (∼50-100 mg) with a precision on the order of 1‰ in the presence of a relaxation agent, such as Cr(acac)3, and CH313COONa as an internal standard. The method was first applied to soluble inorganic carbonates and bicarbonates and then extended to insoluble carbonates by converting them to Na2CO3, following a simple procedure and without observing isotopic fractionation. Here, we demonstrate that 13C NMR spectroscopy can also be successfully adopted to characterize the 13C/12C isotope ratio in inorganic carbonates and bicarbonates with applications in different fields, such as cultural heritage and geological studies.

Bactericidal and Fungicidal Activity in the Gas Phase of Sodium Dichloroisocyanurate (NaDCC).

Sodium dichloroisocyanurate (NaDCC) is usually employed as a disinfectant for the treatment of water, environmental surfaces and medical equipment principally for its effectiveness as a microbicide agent. In this study, we explore the possibility of a new use for NaDCC by investigating the microbicidal activity of chlorine, which derives from the hydrolysis of NaDCC mediated by air humidity, and by testing its effect on the neutralization of microbes present in domestic waste. NaDCC was inserted in a plastic garbage can where LB agar plates, with different dilutions of a known title of four different microorganisms (Escherichia coli, Staphylococcus aureus, Debaryomyces hansenii and Aspergillus brasiliensis), were weakly inserted. The molecular chlorine (Cl2) levels present in the garbage can were quantified using an iodometric titration. The gas emitted in the garbage can presented a strong microbicide effect, inhibiting the proliferation of all four microorganisms and for four consecutive weeks, thus showing that NaDCC hydrolysis, mediated by air humidity, is able to ensure the decontamination of restricted environments, avoiding the proliferation of both Gram-positive and Gram-negative bacteria as well as fungi.

Sulphurous air pollutants and exposure events of workers in thermal-mineral springs: a case study of Contursi Terme (Salerno, Italy).

Thermo-mineral springs are widely spread over the volcanic areas of Salerno, a city in southern Italy. Although the water of thermal structures provides beneficial effects on human health, the air is characterized by the presence of potentially toxic compounds, such as hydrogen sulphide (H2S) and sulphur dioxide (SO2). Exposure to sulphurous compounds may have detrimental effects on human health, with asthma being the most common. In this study, air concentrations of H2S and SO2 in the thermal springs of Contursi Terme (Salerno, Italy) were monitored for 4 months (using both active and passive sampling), along with the chemical and microclimatic characterization of thermal water, to assess workers' exposure to these pollutants. An in-depth characterization of indoor air at the springs is paramount to establish emission control limits for occupational exposure and to take protective measures. The air concentration of SO2 varied from 0.11 ± 0.02 to 0.91 ± 0.02 mg/m3, following a seasonal pattern (higher values in winter and lower in spring). Conversely, indoor H2S concentrations did not vary significantly with time, but outdoor levels (from 0.40 ± 0.03 to 1.90 ± 0.03 mg/m3) were always higher than indoor ones (from 0.11 ± 0.03 to 0.56 ± 0.03 mg/m3). Not negligible air concentrations of these pollutants were detected in this thermal spring workplace, so further investigations are needed to ensure workers' safety.

Insight on the deterioration of cultural objects: a multi-analytical approach to characterize degradation products of lead weights from a Steinway & sons piano.

The identification of the degradation products in objects of cultural significance, including musical instruments (e.g., a piano), is a key issue for the preservation and valorisation processes of cultural heritage. The aim of this study is to characterize the degradation products of lead weights from an important Steinway & sons piano using a multi-analytical approach that includes ionic chromatography (IC), X-ray diffraction (XRD) and Fourier transform-infrared (FTIR) spectroscopy analyses. These techniques allowed us to identify hydrocerussite as the main degradation product on the superficial layer of lead weights, followed by lead acetate and formate. Moreover, accelerated corrosion experiments in closed environments were performed under acetic and formic acid atmospheres to evaluate the development of lead acetate and formate over time. Exposure of lead weights to formic and acetic acid vapours leads to the prevalent formation of basic lead formate, which promotes the formation of hydrocerussite. These results can help to limit the degradation of these piano components and consequently preserve the sound of the piano itself.

An Innovative Filtering System for the Handling of Asbestos-Based Products: Improvement of Safety and Quality of Work in Analysis Laboratories.

Although being banned or restricted in many countries since the early 1990s, large quantities of asbestos are still used or present in building materials all over the world and its removal or handling requires specific systems that limit exposure to airborne fibers The exposure to asbestos causes chronic diseases such as asbestosis and lung cancer with an incubation period of 20 to 50 years. Among the operators most exposed to contamination are those who handle and analyze the materials in laboratories. For this reason, our work focused on an innovative method for removing a filter unit from a laboratory extraction hood, in order to improve the safety conditions for the operators and the surrounding environment. The hood has a particular construction technology with a mechanism that allows the spraying of a special encapsulating liquid on the ULPA filters below the work-bench, which is capable of forming a film and blocking the fibers on the surface of the same filter. The fibers are irreversibly bounded and can no longer be released into the surrounding environment. The monitoring of activity highlighted the absence of asbestos fibers in the air after installation of the filter and workers feel safer performing their activities. The introduction of an innovative filtering system enhanced the safety of work activities involving asbestos exposure, moreover, the time spent on the hood's maintenance and the risk perception of workers were improved.

New analytical approach to monitoring air quality in historical monuments through the isotopic ratio of CO2.

In this study, we evaluated indoor air quality to highlight the effects of environmental pollution in the field of cultural heritage. In particular, two important archeological places in the old part of the city of Salerno, Italy, were analyzed: Fruscione Palace and S. Pietro a Corte. The work focused on the influence of tourists on environmental pollution correlated to indoor air quality during some social and cultural events. Moreover, we focused on the possible use of the carbon isotopic composition of CO2 as a tool for environmental studies in the field of cultural heritage. The results showed a good relationship between the isotopic composition of CO2 and the variation of pollutants concentration in the air, demonstrating that it is a valid tool and non-invasive marker to monitor environmental pollution of museums and cultural heritage sites.

Leonardo da Vinci's "Last Supper": a case study to evaluate the influence of visitors on the Museum preservation systems.

The most important parameter to obtain an appropriate preservation condition of museum environments concerns the indoor air quality. The exposure of artwork and materials to gaseous and particulate pollutants introduced by visitors and either indoor or outdoor sources contributes to their decay. In this work, we evaluated the possible monitoring of the visitors' influence using the stable carbon isotopic ratio of CO2 and the concentration of NH3 as a real-time tool. The study was done in the Refectory of Santa Maria delle Grazie (Milan, Italy) which houses one of the most important paintings of Leonardo da Vinci, the Last Supper, and had more than 400,000 visitors in 2019. The results confirmed a good correlation between the presence of tourists inside the museum and the variation of δ13C value during the visits and the closure of the museum. The variation of indoor atmospheric δ13C was influenced by the presence of visitors in the Refectory and delineates the way done from the entrance to the exit. In the same way, the concentration of NH3 was influenced by the presence of visitors and confirmed the role of this one on preservation methodology for indoor air quality in the museum. This new methodology can be used as a supplemental and non-invasive tool to help in calibrating microclimatic conditions through the ventilation rate and air filtration systems in the museum and to manage the number of visitors per turn.

Investigations on historical monuments' deterioration through chemical and isotopic analyses: an Italian case study.

In this paper, we analysed the efflorescences present in the frescos of a monumental complex named S. Pietro a Corte situated in the historic centre of Salerno (Campania, Italy). The groundwater of the historic centre is fed by two important streams (the Rafastia and the Fusandola) that can be the sources of water penetration. The aims of this work are to (i) identify the stream that reaches the ancient frigidarium of S. Pietro a Corte and (ii) characterize the efflorescences on damaged frescos in terms of chemical nature and sources. In order to accomplish the first aim, the water of the Rafastia river (7 samples) and the water of the Fusandola river (7 samples) were analysed and compared with the water of a well of the Church (7 samples). The ionic chromatography measurements on the water samples allowed us to identify the Rafastia as the river that feeds the ancient frigidarium of S. Pietro a Corte. To investigate the nature and the origin of the efflorescences (our second aim), anionic chromatography analyses, X-ray diffraction measurements, and the isotopic determination of nitrogen were performed on the efflorescences (9 samples) and the salts recovered from the well (6 samples). Results of these analyses show that efflorescences are mainly made of potassium nitrate with a δ15N value of + 9.3 ± 0.2‰. Consequently, a plausible explanation for their formation could be the permeation of sewage water on the walls of the monumental complex.

First Evidence of Microplastics in Human Urine, a Preliminary Study of Intake in the Human Body.

The ubiquitous presence of microplastics (MPs) and their health effects is a recent scientific topic. However, the investigation of MPs in human/biological matrices has several limitations due to analytical methods and sample treatment protocols. In this study, the presence of MPs in the urine samples of six volunteers from different cities in the south of Italy (three men and three women) was investigated by Raman microspectroscopy. The analysis pinpointed four pigmented microplastic fragments (4-15 µm size), with irregular shapes, which were characterized in terms of morphology and chemical composition. Polyethylene vinyl acetate (PVA), polyvinyl chloride (PVC), polypropylene (PP), and polyethylene (PE) MPs were found in four samples (PVA and PVC in one female sample and PP and PE in three male samples). This preliminary study suggests that MPs could pass through the gastrointestinal tract and are eliminated through biological processes.

Polychlorinated Biphenyls (PCBs) in the Environment: Occupational and Exposure Events, Effects on Human Health and Fertility.

In the last decade or so, polychlorinated biphenyls (PCBs) garnered renewed attention in the scientific community due to new evidence pointing at their continued presence in the environment and workplaces and the potential human risks related to their presence. PCBs move from the environment to humans through different routes; the dominant pathway is the ingestion of contaminated foods (fish, seafood and dairy products), followed by inhalation (both indoor and outdoor air), and, to a lesser extent, dust ingestion and dermal contact. Numerous studies reported the environmental and occupational exposure to these pollutants, deriving from building materials (flame-retardants, plasticizers, paints, caulking compounds, sealants, fluorescent light ballasts, etc.) and electrical equipment. The highest PCBs contaminations were detected in e-waste recycling sites, suggesting the need for the implementation of remediation strategies of such polluted areas to safeguard the health of workers and local populations. Furthermore, a significant correlation between PCB exposure and increased blood PCB concentrations was observed in people working in PCB-contaminated workplaces. Several epidemiological studies suggest that environmental and occupational exposure to high concentrations of PCBs is associated with different health outcomes, such as neuropsychological and neurobehavioral deficits, dementia, immune system dysfunctions, cardiovascular diseases and cancer. In addition, recent studies indicate that PCBs bioaccumulation can reduce fertility, with harmful effects on the reproductive system that can be passed to offspring. In the near future, further studies are needed to assess the real effects of PCBs exposure at low concentrations for prolonged exposure in workplaces and specific indoor environments.

Investigation of biocidal efficacy of commercial disinfectants used in public, private and workplaces during the pandemic event of SARS-CoV-2.

This study investigated the performance of 24 commercial disinfectants present on the market during last year according to the manufacturer's instructions. Recently, national and international organizations of public health performed studies on disinfection products due to the increasing awareness of the potential and growing risks on human health, such as skin damage and reactions in the mucosal lining, especially for the healthcare workers in their frequent daily use. However, there are many limitations in the common cleaning/disinfection products on market as in the selection of effective disinfectants to decontaminate inanimate surfaces. We analyzed the disinfection power of hydrogen peroxide, quaternary ammonium compounds, alcohols, phenols and aldehydes used as active principles according to international guidelines. The antimicrobial properties were assessed by broth microdilution, and antibiofilm properties against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus); their virucidal efficacy was tested against Herpes simplex virus type 1 (HSV-1) and Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The quaternary ammonium compounds demonstrated better efficacy than others and in some cases ready to use products had also virucidal and antimicrobial activities after dilution at 0.125%. The scientific evidence indicates that many commercial products are used at high concentrations and high doses and this could have deleterious effects both on human health and the environment. A lower concentration of active ingredients would avoid the excessive release of chemicals into the environment and improve skin tolerance, ensuring the health and safety protection of workers, including the healthcare operators at their workplace.

Deployment of a Novel Organic Acid Compound Disinfectant against Common Foodborne Pathogens.

BACKGROUND: The disinfection process represents an important activity closely linked to the removal of micro-organisms in common processing systems. Traditional disinfectants are often not sufficient to avoid the spread of food pathogens; therefore, innovative strategies for decontamination are crucial to countering microbial transmission. This study aims to assess the antimicrobial efficiency of tetrapotassium iminodisuccinic acid salt (IDSK) against the most common pathogens present on surfaces, especially in food-borne environments. METHODS: IDSK was synthesized from maleic anhydride and characterized through nuclear magnetic resonance (NMR) spectroscopy (both 1H-NMR and 13C-NMR), thermogravimetric analysis (TGA) and Fourier Transform Infrared (FTIR) spectroscopy. The antibacterial activity was performed via the broth microdilution method and time-killing assays against Escherichia coli, Staphylococcus aureus, Salmonella enterica, Enterococcus faecalis and Pseudomonas aeruginosa (IDSK concentration range: 0.5-0.002 M). The biofilm biomass eradicating activity was assessed via a crystal violet (CV) assay. RESULTS: The minimum inhibitory concentration (MIC) of IDSK was 0.25 M for all tested strains, exerting bacteriostatic action. IDSK also reduced biofilm biomass in a dose-dependent manner, reaching rates of about 50% eradication at a dose of 0.25 M. The advantages of using this innovative compound are not limited to disinfecting efficiency but also include its high biodegradability and its sustainable synthesis. CONCLUSIONS: IDSK could represent an innovative and advantageous disinfectant for food processing and workers' activities, leading to a better quality of food and safer working conditions for the operators.

Burnout and Psychological Vulnerability in First Responders: Monitoring Depersonalization and Phobic Anxiety during the COVID-19 Pandemic.

BACKGROUND: It is common knowledge that first responders are among the helping professionals most at risk of burnout and psychological vulnerability. During the COVID-19 pandemic, their mental health has been subjected to various risk factors. METHODS: Data on socio-demographic characteristics, the Maslach Burnout Inventory (MBI) and psychological vulnerability (SCL-90-R) were obtained from 228 subjects (55.3% female; M age = 45.23, SD = 13.14) grouped on the basis of their actual involvement during the emergency phases (82% First Responders and 18% Second Responders). RESULTS: First responders exceeded the MBI clinical cut-off, while SRs did not (χ² ≥ 0.5); specifically, EE = 89.8%, DP = 85.8%, and PA = 82.1%. The FR group showed a higher mean in the global severity index (GSI = 49.37) than did the SRs (=43.95), and the FR group exceeded the clinical cut-off in the SCL-90-R scales of SOM (51.06), ANX (52.40), and PHOB (53.60), while the SF group did so only for the PHOB scale (50.41). The MBI dimensions correlated significantly (p = 0.05) with all investigated clinical scales of the SCL-90-R. CONCLUSIONS: Emergency situations expose first responders to specific risk factors related to work performance and relational aspects, which contribute to increased psychological vulnerability and burnout.

Rapid and sensitive detection of SARS-CoV-2 variants in nasopharyngeal swabs and wastewaters.

The SARS-CoV-2 virus is continuously evolving, with appearance of new variants characterized by multiple genomic mutations, some of which can affect functional properties, including infectivity, interactions with host immunity, and disease severity. The rapid spread of new SARS-CoV-2 variants has highlighted the urgency to trace the virus evolution, to help limit its diffusion, and to assess effectiveness of containment strategies. We propose here a PCR-based rapid, sensitive and low-cost allelic discrimination assay panel for the identification of SARS-CoV-2 genotypes, useful for detection in different sample types, such as nasopharyngeal swabs and wastewater. The tests carried out demonstrate that this in-house assay, whose results were confirmed by SARS-CoV-2 whole-genome sequencing, can detect variations in up to 10 viral genome positions at once and is specific and highly sensitive for identification of all tested SARS-CoV-2 clades, even in the case of samples very diluted and of poor quality, particularly difficult to analyze.

Microplastics in the Environment: Intake through the Food Web, Human Exposure and Toxicological Effects.

Recently, studies on microplastics (MPs) have increased rapidly due to the growing awareness of the potential health risks related to their occurrence. The first part of this review is devoted to MP occurrence, distribution, and quantification. MPs can be transferred from the environment to humans mainly through inhalation, secondly from ingestion, and, to a lesser extent, through dermal contact. As regards food web contamination, we discuss the microplastic presence not only in the most investigated sources, such as seafood, drinking water, and salts, but also in other foods such as honey, sugar, milk, fruit, and meat (chickens, cows, and pigs). All literature data suggest not-negligible human exposure to MPs through the above-mentioned routes. Consequently, several research efforts have been devoted to assessing potential human health risks. Initially, toxicological studies were conducted with aquatic organisms and then with experimental mammal animal models and human cell cultures. In the latter case, toxicological effects were observed at high concentrations of MPs (polystyrene is the most common MP benchmark) for a short time. Further studies must be performed to assess the real consequences of MP contamination at low concentrations and prolonged exposure.

Application of 13C Quantitative NMR Spectroscopy to Isotopic Analyses for Vanillin Authentication Source.

The carbon stable isotope ratio (δ13C) is a valuable chemical parameter in the investigation of the geographic origin, quality, and authenticity of foods. The aim of this study is the evaluation of the feasibility of 13C-NMR (Nuclear Magnetic Resonance) spectroscopy to determine the carbon stable isotope ratio, at natural abundance, of small organic molecules, such as vanillin, without the use of IRMS (Isotope Ratio Mass Spectrometry). The determination of vanillin origin is an active task of research, and differentiating between its natural and artificial forms is important to guarantee the quality of food products. To reach our goal, nine vanillin samples were analyzed using both 13C quantitative NMR spectroscopy (under optimized experimental conditions) and IRMS, and the obtained δ13C values were compared using statistical analysis (linear regression, Bland-Altman plot, and ANOVA (analysis of variance)). The results of our study show that 13C-NMR spectroscopy can be used as a valuable alternative methodology to determine the bulk carbon isotope ratio and to identify the origin of vanillin. This makes it attractive for the analysis in the same experiment of site-specific and total isotope effects for testing authenticity, quality, and typicality of food samples. Moreover, the improvement of NMR spectroscopy makes it possible to avoid the influence of additives on carbon stable isotope ratio analysis and to clearly identify fraud and falsification in commercial samples.

The influence of microclimate conditions on ozone disinfection efficacy in working places.

In recent years, the sanitization of environments, devices, and objects has become mandatory to improve human and environmental safety, in addition to individual protection and prevention measures. International studies considered ozone one of the most useful and easy sanitization methods for indoor environments, especially hospital environments that require adequate levels of disinfection. The purpose of this work was to evaluate the microclimate influence on sanitizing procedure for indoor settings with ozone, to prevent infections and ensure the safe use of the environments. The concentration of ozone was measured during sanitization treatment and estimation of microorganisms' survival on the air and different contaminated plates after the sanitization operations were performed. The results demonstrated a significant reduction in the microbial count that always fell below the threshold value in different conditions of distance, temperature, and relative humidity.