Development of a multispecies periodontal biofilm model within a stirred bioreactor.

The objective of this work was to develop a subgingival biofilm model using a stirred bioreactor. Discs of bovine teeth were adapted to a stirred bioreactor filled with a culture medium containing bacterial species associated with periodontal health or disease. After anaerobic incubation, the biofilms growing on the substratum surfaces were collected and analyzed. The mean number of Colony-forming Units (CFUs) varied, but with no difference between 3 and 7 days of biofilm formation (p > 0.05). Scanning Electron Microscopy (SEM) analysis showed a uniform biofilm layer covering the cement layer of the root surface containing bacteria with diverse morphology. In checkerboard DNA-DNA hybridization, bacterial species were identified in both biofilms. In conclusion, a subgingival biofilm model was developed using a stirred bioreactor, allowing the in vitro reproduction of complex microbial communities. This is an advanced model that may be useful to mimic complex clinical periodontal biofilms.

Systems metabolic engineering of Escherichia coli for production of the antitumor drugs violacein and deoxyviolacein.

Violacein and deoxyviolacein are interesting therapeutics against pathogenic bacteria and viruses as well as tumor cells. In the present work, systems-wide metabolic engineering was applied to target Escherichia coli, a widely accepted recombinant host in pharmaceutical biotechnology, for production of these high-value products. The basic producer, E. coli dVio-1, that expressed the vioABCE cluster from Chromobacterium violaceum under control of the inducible araC system, accumulated 180 mg L(-1) of deoxyviolacein. Targeted intracellular metabolite analysis then identified bottlenecks in tryptophan supporting pathways, the major product building block. This was used for comprehensive engineering of serine, chorismate and tryptophan biosynthesis and the non-oxidative pentose-phosphate pathway. The final strain, E. coli dVio-6, accumulated 320 mg L(-1) deoxyviolacein in shake flask cultures. The created chassis of a high-flux tryptophan pathway was complemented by genomic integration of the vioD gene of Janthinobacterium lividum, which enabled exclusive production of violacein. In a fed-batch process, the resulting producer E. coli Vio-4 accumulated 710 mg L(-1) of the desired product. With straightforward broth extraction and subsequent crystallization, violacein could be obtained with 99.8% purity. This demonstrates the potential of E. coli as a platform for production of tryptophan based therapeutics.

UHMWPE/HA biocomposite compatibilized by organophilic montmorillonite: An evaluation of the mechanical-tribological properties and its hemocompatibility and performance in simulated blood fluid.

The low interaction between ultra high molecular weight polyethylene (UHMWPE) and hydroxyapatite (HA) has been one of the problems that results in a composite material with low mechanical and tribological performance due to the formation of agglomerates and microstructural defects. These properties affect the quality of the material when used for total joint implants and other applications in hard tissue engineering. This study investigated the effect of the addition of organophilic bentonite (BO) into the interface HA and UHMWPE. The composite was prepared by wet milling in a planetary mill and then by compression molding. The composites samples were characterized by XRD, FTIR, SEM and DSC. The tensile and tribological mechanical properties were also evaluated. Furthermore, in vitro degradation using simulated blood fluid (SBF) and hemocompatibility was performed. The results suggest that the addition of 10 wt% of organophilic bentonite improved the interface between the UHMWPE and HA by exfoliation/intercalation, presenting the best results of modulus of elasticity, tensile strength, coefficient of friction and rate of wear. The composite UHMWPE/HA/BO-10 wt% presented low water absorption and induced the growth of apatite crystals on its surface. Additionally, its hemocompatibility index is within normal limits and induced a low adhesion and agglomeration of platelets in contact with human blood, evidencing that the UHMWPE/HA/BO-10 wt% composite is promising for application in bone tissue engineering.

Bacterial nanocellulose-IKVAV hydrogel matrix modulates melanoma tumor cell adhesion and proliferation and induces vasculogenic mimicry in vitro.

Vasculogenic mimicry process has generated great interest over the past decade. So far, however, there have been only a few matrices available that allow us to study that process in vitro. Here, we have developed an innovative hydrogel platform with defined composition that mimics the structural architecture and biological functions of the extracellular matrix for vasculogenic mimicry of human melanoma cells (SK-MEL-28). We chemically immobilized IKVAV peptide on bacterial nanocellulose (BNC) fibers. BNC-IKVAV hydrogel was found to improve the adhesion and proliferation of SK-MEL-28 cells on the top and bottom surfaces. Particularly, the bottom surface of BNC-IKVAV induced SK-MEL-28 cells to organize themselves as well-established networks related to the vasculogenic mimicry process. Finally, our results showed that not only BNC-IKVAV but also BNC hydrogels can potentially be used as a three-dimensional platform that allows the screening of antitumor drugs. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2741-2749, 2018.

Physicochemical and biological assessment of PEEK composites embedding natural amorphous silica fibers for biomedical applications.

The main aim of this study was to assess the physicochemical and biological properties of a novel poly(ether ether ketone) (PEEK) composite containing 30%wt natural amorphous silica fibers (NASF). PEEK and NASF powders were previously functionalized by atomization and citric acid in order to enhance adhesion between polymeric matrix and fillers. Then, composites were produced by cold compression molding technique at 350°C for 3h. Materials were characterized by chemical, microstructural, thermophysical, mechanical and cytotoxic analysis. The results of the mechanical assays showed that the incorporation fibers increased the elastic modulus of the resultant PEEK composite in 56% while its microhardness increased in 26.7%. Chemical and microscopic analyses detected a good interfacial adhesion between PEEK and NASF. The results of the cytotoxicity assays indicated that PEEK/NASF composites stimulated the metabolic activity of fibroblasts and therefore a high cytocompatibility was noticed. PEEK composites embedding natural amorphous silica fibers revealed a high potential to be used in medicine and dentistry replacing several polymeric and composite materials.

Nanofiber density determines endothelial cell behavior on hydrogel matrix.

When cultured under static conditions, bacterial cellulose pellicles, by the nature of the polymer synthesis that involves molecular oxygen, are characterized by two distinct surface sides. The upper surface is denser in fibers (entangled) than the lower surface that shows greater surface porosity. Human umbilical vein endothelial cells (HUVECs) were used to exploit how the microarchitecture (i.e., surface porosity, fiber network structure, surface topology, and fiber density) of bacterial cellulose pellicle surfaces influence cell-biomaterial interaction and therefore cell behavior. Adhesion, cell ingrowth, proliferation, viability and cell death mechanisms were evaluated on the two pellicle surface sides. Cell behavior, including secondary necrosis, is influenced only by the microarchitecture of the surface, since the biomaterial is extremely pure (constituted of cellulose and water only). Cell-cellulose fiber interaction is the determinant signal in the cell-biomaterial responses, isolated from other frequently present interferences such as protein and other chemical traces usually present in cell culture matrices. Our results suggest that microarchitecture of hydrogel materials might determine the performance of biomedical products, such as bacterial cellulose tissue engineering constructs (BCTECs).

Enriched glucose and dextrin mannitol-based media modulates fibroblast behavior on bacterial cellulose membranes.

Bacterial cellulose (BC) produced by Gluconacetobacter hansenii is a suitable biopolymer for biomedical applications. In order to modulate the properties of BC and expand its use as substrate for tissue engineering mainly in the form of biomembranes, glucose or dextrin were added into a BC fermentation mannitol-based medium (BCGl and BCDe, respectively) under static culture conditions. SEM images showed effects on fiber density and porosity on both sides of the BC membranes. Both enriched media decreased the BET surface area, water holding capacity, and rehydration rate. Fourier transform infrared (attenuated total reflectance mode) spectroscopy (FTIR-ATR) analysis revealed no change in the chemical structure of BC. L929 fibroblast cells were seeded on all BC-based membranes and evaluated in aspects of cell adhesion, proliferation and morphology. BCG1 membranes showed the highest biological performance and hold promise for the use in tissue engineering applications.

Structure and properties of polypyrrole/bacterial cellulose nanocomposites.

An electrically conducting composite based on bacterial cellulose (BC) and polypyrrole (PPy) was prepared through in situ oxidative polymerization of pyrrole (Py) in the presence of BC membrane using ammonium persulfate (APS), as an oxidant. The electrical conductivity, morphology, mechanical properties and thermal stability of the composites obtained using APS (BC/PPy·APS) were evaluated and compared with BC/PPy composites prepared using as oxidant agent Iron III chloride hexahydrate (FeCl3·6H2O). The morphology of the BC/PPy·APS composites is characterized by spherical conducting nanoparticles uniformly distributed on the BC nanofiber surface, while the composites produced with FeCl3·6H2O (BC/PPy·FeCl3) is composed of a continuous conducting polymer layer coating the BC-nanofibers. The electrical conductivity of BC/PPy·FeCl3 was 100-fold higher than that found for BC/PPy·APS composites. In order to understand the site-specific interaction between PPy and BC functional groups, both composites were characterized by Fourier transform infrared (attenuated total reflectance mode) spectroscopy attenuation reflectance (FTIR-ATR) and X-ray photoelectron spectrometry (XPS). The affinity between functional groups of PPy·FeCl3 and BC is higher than that found for BC/PPy·APS composite. In addition, the tensile properties were also influenced by the chemical affinity of both components in the polymer composites.

Cellulose biosynthesis by the beta-proteobacterium, Chromobacterium violaceum.

The Chromobacterium violaceum ATCC 12472 genome was sequenced by The Brazilian National Genome Project Consortium. Previous annotation reported the presence of cellulose biosynthesis genes in that genome. Analysis of these genes showed that, as observed in other bacteria, they are organized in two operons. In the present work, experimental evidences of the presence of cellulose in the extracellular matrix of the biofilm produced by C. violaceum in static cultures are shown. Biofilm samples were enzymatically digested by cellulase, releasing glucose units, suggesting the presence of cellulose as an extracellular matrix component. Fluorescence microscopy observations showed that C. violaceum produces a cellulase-sensitive extracellular matrix composed of fibers able to bind calcofluor. C. violaceum grows on medium containing Congo red, forming brown-red colonies. Together, these results suggest that cellulase-susceptible matrix material is cellulose. Scanning electronic microscopy analysis showed that the extracellular matrix exhibited a network of microfibrils, typical of bacterial cellulose. Although cellulose production is widely distributed between several bacterial species, including at least the groups of Gram-negative proteobacteria alpha and gamma, we give for the first time experimental evidence for cellulose production in beta-proteobacteria.