RESUMO
The Hands-On Photonic Education (HOPE) Kits, developed with AIM Photonics, address the need for skilled workers in integrated photonics. This paper highlights the role of the HOPE Kits in advancing the training ecosystem and bridging the skills gap. The kits include fully packaged photonic integrated circuits (PICs), enabling instructors to educate and train students on PIC testing and characterization. Covering a wide range of devices and circuits, from waveguides to wavelength division multiplexing for data communication, the kits offer a hands-on experience. Engaging with actual PICs, students gain practical insights, enhancing their understanding of key principles, and preparing them for real-world skill sets in integrated photonics.
RESUMO
We experimentally measure the optical nonlinearities in hydrogenated-amorphous silicon (a-Si:H) waveguides through the transmission of ultra-short pulses. The measured two-photon absorption coefficient beta is 4.1 cm/GW and we obtain a 3.5pi nonlinear phase shift at 4.1 W coupled input power corresponding to a nonlinear refractive index n(2) of 4.210(-13) cm(2)/W. The measured nonlinear coefficient gamma = 2003 (Wm)(-1) is at least 5 times the value in crystalline silicon. The measured free carrier absorption coefficient sigma = 1.910(-16) cm(2) agrees with the values predicted from the Drude-Lorenz model. It is seen that a-Si:H exhibits enhanced nonlinear properties at 1550 nm and is a promising platform for nonlinear silicon photonics.
RESUMO
We demonstrate the generation of amplitude-shift-keying (ASK) optical signals using a system of parallel microring resonators. By independently modulating two symmetric microring resonators arranged in a Mach-Zehnder configuration, we realize the generation of three levels. The proposed scheme can be extended to any number of logic levels, which effectively increases the data rate of an optical link using slower modulators. Here, we separately utilize thermo-optic and ultrafast all-optical modulation schemes to generate ASK signals on a silicon photonic chip.
RESUMO
We demonstrate broadband all-optical modulation in low loss hydrogenated-amorphous silicon (a-Si:H) waveguides. Significant modulation (approximately 3 dB) occurs with a device of only 15 microm without the need for cavity interference effects in stark contrast to an identical crystalline silicon waveguide. We attribute the enhanced modulation to the significantly larger free-carrier absorption effect of a-Si:H, estimated here to be alpha = 1.6310(-16)N cm(-1). In addition, we measured the modulation time to be only tau(c) approximately 400 ps, which is comparable to the recombination rate measured in sub-micron crystalline silicon waveguides, illustrating the strong dominance of surface recombination in similar sized (460 nm x 250 nm) a-Si:H waveguides. Consequently, a-Si:H could serve as a high performance platform for backend integrated CMOS photonics.
Assuntos
Hidrogênio/química , Interferometria/métodos , Silício/química , Telecomunicações/instrumentação , Luz , Teste de Materiais , Espalhamento de RadiaçãoRESUMO
We experimentally demonstrate a tunable delay element that is inherently insensitive to free-carrier loss and achieves up to 300ps of delay. It is capable of arbitrarily storing and releasing a pulse of light through dynamic tuning of a system of microcavities. The inherent storage time is more than 32 times the duration of the stored pulse.
RESUMO
In this work, we experimentally demonstrate a novel broadband optical time division multiplexer (OTDM) on a silicon chip. The fabricated devices generate 20 Gb/s and 40 Gb/s signals starting from a 5 Gb/s input signal. The proposed design has a small footprint of 1mm x 1mm. The system is inherently broadband with a bandwidth of over 100nm making it suitable for high-speed optical networks on chip.
Assuntos
Eletrônica/instrumentação , Eletrônica/métodos , Óptica e Fotônica/instrumentação , Óptica e Fotônica/métodos , Silício , Simulação por Computador , Desenho de Equipamento , Lasers , Microscopia Eletrônica de Varredura , Miniaturização/instrumentação , Miniaturização/métodosRESUMO
The ternary III-V semiconductor compound, Al xGa1 -xAs, is an important material that serves a central role within a variety of nanoelectronic, optoelectronic, and photovoltaic devices. With all of its uses, the material itself poses a host of fabrication difficulties stemming from conventional top-down processing, including standard wet-chemical etching and reactive-ion etching (RIE). Metal-assisted chemical etching (MacEtch) techniques provide low-cost and benchtop methods that combine many of the advantages of RIE and wet-chemical etching, without being hindered by many of their disadvantages. Here, inverse-progression MacEtch (I-MacEtch) of Au-patterned Al xGa1 -xAs is demonstrated for the first time and is exploited for the generation of vertical and ordered nanopillar arrays. The etching solution employed here consists of citric acid (C6H8O7) and hydrogen peroxide (H2O2). The I-MacEtch evolution is tracked in time for Al xGa1 -xAs samples with compositions defined by x = 0.55, x = 0.60, and x = 0.70. The vertical and lateral etch rates (VER and LER, respectively) are shown to be tunable with Al fraction and temperature of the etching solution, based on modification of catalytically injected hole distributions. Control over the VER/LER ratio is demonstrated by tailoring etch conditions for single-step fabrication of ordered AlGaAs nanopillar arrays with predefined aspect ratios. Maximum VER and LER values of â¼40 nm/min and â¼105 nm/min, respectively, are measured for Al0.55Ga0.45As at a process temperature of 65 °C. The I-MacEtch nanofabrication methodology outlined in this study may be utilized for the processing of many devices, including high electron mobility transistors, distributed Bragg reflectors, lasers, light-emitting diodes, and multijunction solar cells containing AlGaAs components.
Assuntos
Nanoestruturas , Peróxido de Hidrogênio , Metais , SemicondutoresRESUMO
We demonstrate a 1x2 all-optical comb switch using a 200 mum diameter silicon ring resonator with a switching time of less than 1 ns. The switch overcomes the small bandwidth of the traditional ring resonator, and works for wavelength division multiplexing applications. The device has a footprint of ~0.04 mm(2) and enables switching of a large number (~40) of wavelength channels spaced by ~0.85 nm.
RESUMO
Silicon photonic chips have the potential to realize complex integrated quantum information processing circuits, including photon sources, qubit manipulation, and integrated single-photon detectors. Here, we present the key aspects of preparing and testing a silicon photonic quantum chip with an integrated photon source and two-photon interferometer. The most important aspect of an integrated quantum circuit is minimizing loss so that all of the generated photons are detected with the highest possible fidelity. Here, we describe how to perform low-loss edge coupling by using an ultra-high numerical aperture fiber to closely match the mode of the silicon waveguides. By using an optimized fusion splicing recipe, the UHNA fiber is seamlessly interfaced with a standard single-mode fiber. This low-loss coupling allows the measurement of high-fidelity photon production in an integrated silicon ring resonator and the subsequent two-photon interference of the produced photons in a closely integrated Mach-Zehnder interferometer. This paper describes the essential procedures for the preparation and characterization of high-performance and scalable silicon quantum photonic circuits.
Assuntos
Desenho de Equipamento , Interferometria , Fótons , Teoria Quântica , Silício , Análise de Falha de EquipamentoRESUMO
We demonstrate a new technique for high resolution imaging of near field profiles in highly confining photonic structures. This technique, Transmission-based Near-field Scanning Optical Microscopy (TraNSOM), measures changes in transmission through a waveguide resulting from near field perturbation by a scanning metallic probe. Using this technique we compare different mode polarizations and measure a transverse optical decay length of lambda/15 in sub-micron Silicon On Insulator (SOI) waveguides. These measurements compare well to theoretical results.
RESUMO
We show the existence of direct photonic transitions between modes of a silicon optical microcavity spaced apart in wavelength by over 8 nm. This is achieved by using ultrafast tuning of the refractive index of the cavity over a time interval that is comparable to the inverse of the frequency separation of modes. The demonstrated frequency mixing effect, i.e., the transitions between the modes, would enable on-chip silicon comb sources which can find wide applications in optical sensing, precise spectroscopy, and wavelength-division multiplexing for optical communications and interconnects.
RESUMO
We experimentally demonstrate ultrafast all-optical modulation using a micrometer-sized silicon photonic integrated device. The device transmission is strongly modulated by photoexcited carriers generated by low-energy pump pulses. A p-i-n junction is integrated on the structure to permit control of the generated carrier lifetimes. When the junction is reverse biased, carriers are extracted from the device in a time as short as 50 ps, permitting greater than 5 Gbit/s modulation of optical signals on a silicon chip.