Nonreciprocal Transport in a Bilayer of MnBi2Te4 and Pt.

MnBi2Te4 (MBT) is the first intrinsic magnetic topological insulator with the interaction of spin-momentum locked surface electrons and intrinsic magnetism, and it exhibits novel magnetic and topological phenomena. Recent studies suggested that the interaction of electrons and magnetism can be affected by the Mn-doped Bi2Te3 phase at the surface due to inevitable structural defects. Here, we report an observation of nonreciprocal transport, that is, current-direction-dependent resistance, in a bilayer composed of antiferromagnetic MBT and nonmagnetic Pt. The emergence of the nonreciprocal response below the Néel temperature confirms a correlation between nonreciprocity and intrinsic magnetism in the surface state of MBT. The angular dependence of the nonreciprocal transport indicates that nonreciprocal response originates from the asymmetry scattering of electrons at the surface of MBT mediated by magnon. Our work provides an insight into nonreciprocity arising from the correlation between magnetism and Dirac surface electrons in intrinsic magnetic topological insulators.

Superposition of Emergent Monopole and Antimonopole in CoTb Thin Films.

A three-dimensional singular point that consists of two oppositely aligned emergent monopoles is identified in continuous CoTb thin films, as confirmed by complementary techniques of resonant elastic x-ray scattering, Lorentz transmission electron microscopy, and scanning transmission x-ray microscopy. This new type of topological defect can be regarded as a superposition of an emergent magnetic monopole and an antimonopole, around which the source and drain of the magnetic flux overlap in space. We experimentally prove that the observed spin twist seen in Lorentz transmission electron microscopy reveals the cross section of the superimposed three-dimensional structure, providing a straightforward strategy for the observation of magnetic singularities. Such a quasiparticle provides an excellent platform for studying the rich physics of emergent electromagnetism.

Long spin coherence length and bulk-like spin-orbit torque in ferrimagnetic multilayers.

Spintronics relies on magnetization switching through current-induced spin torques. However, because spin transfer torque for ferromagnets is a surface torque, a large switching current is required for a thick, thermally stable ferromagnetic cell, and this remains a fundamental obstacle for high-density non-volatile applications with ferromagnets. Here, we report a long spin coherence length and associated bulk-like torque characteristics in an antiferromagnetically coupled ferrimagnetic multilayer. We find that a transverse spin current can pass through >10-nm-thick ferrimagnetic Co/Tb multilayers, whereas it is entirely absorbed by a 1-nm-thick ferromagnetic Co/Ni multilayer. We also find that the switching efficiency of Co/Tb multilayers partially reflects a bulk-like torque characteristic, as it increases with ferrimagnet thickness up to 8 nm and then decreases, in clear contrast to the 1/thickness dependence of ferromagnetic Co/Ni multilayers. Our results on antiferromagnetically coupled systems will invigorate research towards the development of energy-efficient spintronics.

Dual Cross-linked HHA Hydrogel Supplies and Regulates MΦ2 for Synergistic Improvement of Immunocompromise and Impaired Angiogenesis to Enhance Diabetic Chronic Wound Healing.

Immunocompromise and impaired angiogenesis of diabetes lead to chronic inflammation when wounds occur, which is the primary reason for the long-term incurable nature of diabetic chronic wounds. Herein, a high-molecular-weight hyaluronic acid (HHA) hydrogel is developed to supply and regulate M2 phenotype macrophages (MΦ2) for synergistic improvement of immunocompromise and impaired angiogenesis. MΦ2 are seeded on the Cu-HHA/PVA hydrogels prepared by Cu2+ cross-linking of low degree and physical cross-linking (one freeze-thaw cycle and unique lyophilization) to form Cu-HHA/PVA@MΦ2 hydrogels. The Cu-HHA/PVA@MΦ2 hydrogel can directly supply the MΦ2 in the wound site, maintain the consistent phenotype of loaded MΦ2, and transform the M1 phenotype macrophages (MΦ1) in the wound bed to MΦ2 by HHA. Furthermore, Cu2+ could be released from the hydrogels to further stimulate angiogenesis, thus accelerating the wound-healing phase transition from inflammation to proliferation and remodeling. The average wound area after the 0.5Cu-HHA/PVA@MΦ2 (ionic cross-linking degree 0.5%) treatment was much smaller than that of other diabetic groups at day 12 and close to that of the wild nondiabetic control group. Therefore, this facile hydrogel strategy with multiple modulation mechanisms of immunocompromise and angiogenesis may act as a safe and effective treatment strategy for a diabetic chronic wound.

Anomalous Current-Induced Spin Torques in Ferrimagnets near Compensation.

While current-induced spin-orbit torques have been extensively studied in ferromagnets and antiferromagnets, ferrimagnets have been less studied. Here we report the presence of enhanced spin-orbit torques resulting from negative exchange interaction in ferrimagnets. The effective field and switching efficiency increase substantially as CoGd approaches its compensation point, giving rise to 9 times larger spin-orbit torques compared to that of a noncompensated one. The macrospin modeling results also support efficient spin-orbit torques in a ferrimagnet. Our results suggest that ferrimagnets near compensation can be a new route for spin-orbit torque applications due to their high thermal stability and easy current-induced switching assisted by negative exchange interaction.

Viscoelastic behaviour and relaxation modes of one polyamic acid organogel studied by rheometers and dynamic light scattering.

A novel polyamic acid (PAA from BAPMPO-BPDA) organogel was synthesized and characterized via dynamic light scattering (DLS), a classical rheometer, and diffusion wave spectroscopy (DWS). In situ monitoring was performed using a classical rheometer to observe the formation of the PAA organogel. The rheological curves confirm the formation of the PAA gel network and the origin of hydrogen bonding from the -NH- group (donor) and P[double bond, length as m-dash]O group (acceptor). The autocorrelation functions of PAA under different conditions (pure gel, gel with NaNO3, gel with formamide) are measured via DLS, and different characteristic times are obtained via the CONTIN method. Three different relaxation modes of the PAA gel, i.e., fast, intermediate and slow modes, are observed. The fast and intermediate modes show a diffusive behaviour (τ ∼ q-2), whereas the slow mode did not. When enough formamide is added into the PAA gel, the fast mode disappears; addition of enough salt (NaNO3) leads to disappearance of the slow mode. The relationship between characteristic time and diffusion vector demonstrates that the different decorrelation modes consisted of two homodyne and two heterodyne components. Two single-exponential functions and two stretched exponential functions were used, and the different decorrelation modes of the PAA gel are expressed with a non-linear function, which fits the autocorrelation function very well. And the different decorrelation modes are also discussed. DWS results in the high-frequency region not only demonstrate the formation of a PAA gel network but also indicate that the semiflexible chains of PAA are due to electrostatic interaction. The DWS results at different time scales are analyzed by applying the de Gennes' reptation model.

Tunable terahertz reflection of graphene via ionic liquid gating.

We report a highly efficient tunable THz reflector in graphene. By applying a small gate voltage (up to ±3 V), the reflectance of graphene is modulated from a minimum of 0.79% to a maximum of 33.4% using graphene/ionic liquid structures at room temperature, and the reflection tuning is uniform within a wide spectral range (0.1-1.5 THz). Our observation is explained by the Drude model, which describes the THz wave-induced intraband transition in graphene. This tunable reflectance of graphene may contribute to broadband THz mirrors, deformable THz mirrors, variable THz beam splitters and other optical components.

Enhanced Spin-Orbit Torque via Modulation of Spin Current Absorption.

The magnitude of spin-orbit torque (SOT), exerted to a ferromagnet (FM) from an adjacent heavy metal (HM), strongly depends on the amount of spin current absorbed in the FM. We exploit the large spin absorption at the Ru interface to manipulate the SOTs in HM/FM/Ru multilayers. While the FM thickness is smaller than its spin dephasing length of 1.2 nm, the top Ru layer largely boosts the absorption of spin currents into the FM layer and substantially enhances the strength of SOT acting on the FM. Spin-pumping experiments induced by ferromagnetic resonance support our conclusions that the observed increase in the SOT efficiency can be attributed to an enhancement of the spin-current absorption. A theoretical model that considers both reflected and transmitted mixing conductances at the two interfaces of FM is developed to explain the results.

Ultrathin BaTiO3-based ferroelectric tunnel junctions through interface engineering.

The ability to change states using voltage in ferroelectric tunnel junctions (FTJs) offers a route for lowering the switching energy of memories. Enhanced tunneling electroresistance in FTJ can be achieved by asymmetric electrodes or introducing metal-insulator transition interlayers. However, a fundamental understanding of the role of each interface in a FTJ is lacking and compatibility with integrated circuits has not been explored adequately. Here, we report an incisive study of FTJ performance with varying asymmetry of the electrode/ferroelectric interfaces. Surprisingly high TER (∼400%) can be achieved at BaTiO3 layer thicknesses down to two unit cells (∼0.8 nm). Further our results prove that band offsets at each interface in the FTJs control the TER ratio. It is found that the off state resistance (R(Off)) increases much more rapidly with the number of interfaces compared to the on state resistance (ROn). These results are promising for future low energy memories.

Direct observation of the Dzyaloshinskii-Moriya interaction in a Pt/Co/Ni film.

The interfacial Dzyaloshinskii-Moriya interaction in an in-plane anisotropic Pt(4 nm)/Co(1.6 nm)/Ni(1.6 nm) film has been directly observed by Brillouin spectroscopy. It is manifested as the asymmetry of the measured magnon dispersion relation, from which the Dzyaloshinskii-Moriya interaction constant has been evaluated. Linewidth measurements reveal that the lifetime of the magnons is asymmetric with respect to their counter-propagating directions. The lifetime asymmetry is dependent on the magnon frequency, being more pronounced, the higher the frequency. Analytical calculations of the magnon dispersion relation and linewidth agree well with experiments.

PolyNC: a natural and chemical language model for the prediction of unified polymer properties.

Language models exhibit a profound aptitude for addressing multimodal and multidomain challenges, a competency that eludes the majority of off-the-shelf machine learning models. Consequently, language models hold great potential for comprehending the intricate interplay between material compositions and diverse properties, thereby accelerating material design, particularly in the realm of polymers. While past limitations in polymer data hindered the use of data-intensive language models, the growing availability of standardized polymer data and effective data augmentation techniques now opens doors to previously uncharted territories. Here, we present a revolutionary model to enable rapid and precise prediction of Polymer properties via the power of Natural language and Chemical language (PolyNC). To showcase the efficacy of PolyNC, we have meticulously curated a labeled prompt-structure-property corpus encompassing 22 970 polymer data points on a series of essential polymer properties. Through the use of natural language prompts, PolyNC gains a comprehensive understanding of polymer properties, while employing chemical language (SMILES) to describe polymer structures. In a unified text-to-text manner, PolyNC consistently demonstrates exceptional performance on both regression tasks (such as property prediction) and the classification task (polymer classification). Simultaneous and interactive multitask learning enables PolyNC to holistically grasp the structure-property relationships of polymers. Through a combination of experiments and characterizations, the generalization ability of PolyNC has been demonstrated, with attention analysis further indicating that PolyNC effectively learns structural information about polymers from multimodal inputs. This work provides compelling evidence of the potential for deploying end-to-end language models in polymer research, representing a significant advancement in the AI community's dedicated pursuit of advancing polymer science.

Frontiers in all electrical control of magnetization by spin orbit torque.

Achieving all electrical control of magnetism without assistance of an external magnetic field has been highly pursued for spintronic applications. In recent years, the manipulation of magnetic states through spin-orbit torque (SOT) has emerged as a promising avenue for realizing energy-efficient spintronic memory and logic devices. Here, we provide a review of the rapidly evolving research frontiers in all electrical control of magnetization by SOT. The first part introduces the SOT mechanisms and SOT devices with different configurations. In the second part, the developments in all electrical SOT control of magnetization enabled by spin current engineering are introduced, which include the approaches of lateral symmetry breaking, crystalline structure engineering of spin source material, antiferromagnetic order and interface-generated spin current. The third part introduces all electrical SOT switching enabled by magnetization engineering of the ferromagnet, such as the interface/interlayer exchange coupling and tuning of anisotropy or magnetization. At last, we provide a summary and future perspectives for all electrical control of magnetization by SOT.

Antisymmetric planar Hall effect in rutile oxide films induced by the Lorentz force.

The conventional Hall effect is linearly proportional to the field component or magnetization component perpendicular to a film. Despite the increasing theoretical proposals on the Hall effect to the in-plane field or magnetization in various special systems induced by the Berry curvature, such an unconventional Hall effect has only been experimentally reported in Weyl semimetals and in a heterodimensional superlattice. Here, we report an unambiguous experimental observation of the antisymmetric planar Hall effect (APHE) with respect to the in-plane magnetic field in centrosymmetric rutile RuO2 and IrO2 single-crystal films. The measured Hall resistivity is found to be linearly proportional to the component of the applied in-plane magnetic field along a particular crystal axis and to be independent of the current direction or temperature. Both the experimental observations and theoretical calculations confirm that the APHE in rutile oxide films is induced by the Lorentz force. Our findings can be generalized to ferromagnetic materials for the discovery of anomalous Hall effects and quantum anomalous Hall effects induced by in-plane magnetization. In addition to significantly expanding knowledge of the Hall effect, this work opens the door to explore new members in the Hall effect family.

Spin-orbit torques in Co/Pd multilayer nanowires.

Current induced spin-orbit torques have been studied in ferromagnetic nanowires made of 20 nm thick Co/Pd multilayers with perpendicular magnetic anisotropy. Using Hall voltage and lock-in measurements, it is found that upon injection of an electric current both in-plane (Slonczewski-like) and perpendicular (fieldlike) torques build up in the nanowire. The torque efficiencies are found to be as large as 1.17 and 5 kOe at 10(8) A/cm2 for the in-plane and perpendicular components, respectively, which is surprisingly comparable to previous studies in ultrathin (∼1 nm) magnetic bilayers. We show that this result cannot be explained solely by spin Hall effect induced torque at the outer interfaces, indicating a probable contribution of the bulk of the Co/Pd multilayer.

Storage Stability of 6FDA-DMB Polyamic Acid Solution Detected by Gel Permeation Chromatography Coupled with Multiple Detectors.

Polyamic acid (PAA) is the precursor of polyimide (PI), and its solution's properties have a direct influence on the final performances of PI resins, films, or fibers. The viscosity loss of a PAA solution over time is notorious. A stability evaluation and revelation of the degradation mechanism of PAA in a solution based on variations of molecular parameters other than viscosity with storage time is necessary. In this study, a PAA solution was prepared through the polycondensation of 4,4'-(hexafluoroisopropene) diphthalic anhydride (6FDA) and 4,4'-diamino-2,2'-dimethylbiphenyl (DMB) in DMAc. The stability of a PAA solution stored at different temperatures (-18, -12, 4, and 25 °C) and different concentrations (12 wt% and 0.15 wt%) was systematically investigated by measuring the molecular parameters, including Mw, Mn, Mw/Mn, Rg, and [η], using gel permeation chromatography coupled with multiple detectors (GPC-RI-MALLS-VIS) in a mobile phase 0.02 M LiBr/0.20 M HAc/DMF. The stability of PAA in a concentrated solution decreased, as shown by the reduction ratio of Mw from 0%, 7.2%, and 34.7% to 83.8% and that of Mn from 0%, 4.7%, and 30.0% to 82.4% with an increase of temperature from -18, -12, and 4 to 25 °C, respectively, after storage for 139 days. The hydrolysis of PAA in a concentrated solution was accelerated at high temperatures. Notably, at 25 °C, the diluted solution was much less stable than the concentrated one and exhibited an almost linear degradation rate within 10 h. The Mw and Mn decreased rapidly by 52.8% and 48.7%, respectively, within 10 h. Such faster degradation was caused by a greater water ratio and less entanglement of chains in the diluted solution. The degradation of (6FDA-DMB) PAA in this study did not follow the chain length equilibration mechanism reported in literature, given that both Mw and Mn declined simultaneously during storage.

Anomalous spin current anisotropy in a noncollinear antiferromagnet.

Cubic materials host high crystal symmetry and hence are not expected to support anisotropy in transport phenomena. In contrast to this common expectation, here we report an anomalous anisotropy of spin current can emerge in the (001) film of Mn3Pt, a noncollinear antiferromagnetic spin source with face-centered cubic structure. Such spin current anisotropy originates from the intertwined time reversal-odd ([Formula: see text]-odd) and time reversal-even ([Formula: see text]-even) spin Hall effects. Based on symmetry analyses and experimental characterizations of the current-induced spin torques in Mn3Pt-based heterostructures, we find that the spin current generated by Mn3Pt (001) exhibits exotic dependences on the current direction for all the spin components, deviating from that in conventional cubic systems. We also demonstrate that such an anisotropic spin current can be used to realize low-power spintronic applications such as the efficient field-free switching of the perpendicular magnetizations.

In situ gel-to-crystal transition and synthesis of metal nanoparticles obtained by fluorination of a cyclic ß-aminoalcohol gelator.

A new fluorinated version of a cyclic ß-aminoalcohol gelator derived from 1,2,3,4-tetrahydroisoquinoline is presented. The gelator is able to gel various nonprotic solvents through OH⋅⋅⋅N hydrogen bonds and additional CH⋅⋅⋅F interactions due to the introduction of fluorine. A bimolecular lamellar structure is formed in the gel phase, which partly preserves the pattern of molecular organization in the single crystal. The racemate of the chiral gelator shows lower gelation ability than its enantiomer because of a higher tendency to form microcrystals, as shown by X-ray diffraction analysis. The influence of fluorination on the self-assembly of the gelator and the properties of the gel was investigated in comparison to the original fluorine-free gel system. The introduction of fluorine brings two new features. The first is good recognition of o-xylene by the gelator, which induces an in situ transition from gels of o-xylene and of an o-xylene/toluene mixture to identical single crystals with unique tubular architecture. The second is the enhanced stability of the toluene gel towards ions, including quaternary ammonium salts, which enables the preparation of a stable toluene gel in the presence of chloroaurate or chloroplatinate. The gel system can be used as a template for the synthesis of spherical gold nanoparticles with a diameter of 5 to 9 nm and wormlike platinum nanostructures with a diameter of 2 to 3 nm and a length of 5 to 12 nm. This is the first example of a synthesis of platinum nanoparticles in an organogel medium. Therefore, the appropriate introduction of a fluorine atom and corresponding nonbonding interactions into a known gelator to tune the properties and functions of a gel is a simple and effective tactic for design of a gel system with specific targets.

Effect of Ta Interlayers on Texture and Magnetic Properties of FeSi Films with Micrometer Thickness.

Magnetized soft ferromagnetic films with micrometer thickness were studied. A FeSi film, with a total thickness of 2000 nm, separated by 10 nm-thick Ta interlayers, was fabricated using the direct-current magnetron sputtering technique. The thickness of each FeSi layer between adjacent Ta layers was 100 nm. Hysteresis loop measurement was used to characterize the magnetic properties of the layer. X-ray diffraction patterns and high-resolution transmission electron microscopy were used to characterize its texture. The experimental results showed that the FeSi film separated by Ta interlayers exhibited a lower saturation magnetization and a higher coercivity than those of the 1140 nm-thick FeSi film. The insertion of Ta interlayers resulted in the disappearance of the crystal plane of FeSi (221), and better texture of the crystal plane of FeSi (210). The FeSi film exhibited a crystal plane of FeSi (210) with a bcc crystalline structure. The Ta interlayers were partially amorphous, exhibiting crystal plane of Ta (002) and TaSi2 (310). The matching of magnetic properties between interlayers and soft magnetic layers played an important role in maintaining its soft magnetic properties.

Efficient Tuning of the Spin-Orbit Torque via the Magnetic Phase Transition of FeRh.

The understanding and control of the spin-orbit torque (SOT) are central to antiferromagnetic spintronics. Despite the fact that a giant SOT efficiency has been achieved in numerous materials, its efficient tuning in a given material has not been established. Materials with magnetic phase transitions (MPTs) offer a new perspective, as the SOT efficiency may vary significantly for the different magnetic orderings across the transition, and the transition itself can be readily tuned by various control parameters. This work reports that the SOT efficiency of a FeRh-based perpendicular magnetized heterostructure can be significantly tuned by varying the temperature across the MPT. The SOT efficiency exhibits a temperature hysteresis associated with the first-order nature of the MPT, and its value in the ferromagnetic phase is seen to be enhanced by ∼450%, simply by a lowering of temperature to drive FeRh into the antiferromagnetic phase. Furthermore, current-induced magnetization switching can be achieved without an assistant magnetic field for both ferromagnetic and antiferromagnetic FeRh, with a low critical switching current density for the latter. These results not only directly establish FeRh as an efficient spin generator but also present a strategy to dynamically tune SOT via varying the temperature across MPTs.

Efficient perpendicular magnetization switching by a magnetic spin Hall effect in a noncollinear antiferromagnet.

Current induced spin-orbit torques driven by the conventional spin Hall effect are widely used to manipulate the magnetization. This approach, however, is nondeterministic and inefficient for the switching of magnets with perpendicular magnetic anisotropy that are demanded by the high-density magnetic storage and memory devices. Here, we demonstrate that this limitation can be overcome by exploiting a magnetic spin Hall effect in noncollinear antiferromagnets, such as Mn3Sn. The magnetic group symmetry of Mn3Sn allows generation of the out-of-plane spin current carrying spin polarization collinear to its direction induced by an in-plane charge current. This spin current drives an out-of-plane anti-damping torque providing the deterministic switching of the perpendicular magnetization of an adjacent Ni/Co multilayer. Due to being odd with respect to time reversal symmetry, the observed magnetic spin Hall effect and the resulting spin-orbit torque can be reversed with reversal of the antiferromagnetic order. Contrary to the conventional spin-orbit torque devices, the demonstrated magnetization switching does not need an external magnetic field and requires much lower current density which is useful for low-power spintronics.