Ultrastable Surface-Dominated Pseudocapacitive Potassium Storage Enabled by Edge-Enriched N-Doped Porous Carbon Nanosheets.

The development of ultrastable carbon materials for potassium storage poses key limitations caused by the huge volume variation and sluggish kinetics. Nitrogen-enriched porous carbons have recently emerged as promising candidates for this application; however, rational control over nitrogen doping is needed to further suppress the long-term capacity fading. Here we propose a strategy based on pyrolysis-etching of a pyridine-coordinated polymer for deliberate manipulation of edge-nitrogen doping and specific spatial distribution in amorphous high-surface-area carbons; the obtained material shows an edge-nitrogen content of up to 9.34 at %, richer N distribution inside the material, and high surface area of 616 m2 g-1 under a cost-effective low-temperature carbonization. The optimized carbon delivers unprecedented K-storage stability over 6000 cycles with negligible capacity decay (252 mA h g-1 after 4 months at 1 A g-1 ), rarely reported for potassium storage.

Hollow Carbon Nanospheres with Developed Porous Structure and Retained N Doping for Facilitated Electrochemical Energy Storage.

Development of highly porous carbons with abundant surface functionalities and well-defined nanostructure is of significance for many important electrochemical energy storage systems. However, porous carbons suffer from a compromise between porosity, doped functionality, and nanostructure that have thus far restricted their performances. Here, we report the design of highly porous, nitrogen-enriched hollow carbon nanospheres (PN-HCNs) by an interfacial copolymerization strategy followed by NH3-assisted carbonization, and further demonstrate their significance and effectiveness in enhancing the electrochemical performances. The PN-HCN simultaneously delivers a large surface area (1237 m2 g-1) and high N functionalities (6.25 atom %) with a remarkable efficiency of the surface area increase to N loss ratio enabled by NH3 treatment while inheriting the hollow nanospherical structure. Accordingly, owing to the enhanced surface area and retained N doping, the prepared PN-HCN demonstrates outstanding electrochemical performances as a cathode host in lithium-sulfur batteries, including a near-to-theoretical capacity of 1620 mAh g-1, high rate capability and good cycling stability (789 mAh g-1 at 0.5C after 200 cycles). These results are superior to those of HCN without NH3 treatment. Also, PN-HCN exhibits superior capacitances (203 F g-1) and fast ion transport ability in supercapacitors. Our finding shows the simultaneous achievement of both highly porous structures and sufficient N functionalities for high-performance applications.

Unraveling the Correlation between Structures of Carbon Nanospheres Derived from Polymeric Spheres and Their Electrochemical Performance to Achieve High-Rate Supercapacitors.

Understanding correlation between the nanostructure of porous carbons and their ion transport behavior is critical for achieving high-performance supercapacitors. Herein, the relationship between size and shell thickness of carbon nanospheres (CNSs) and capacitive electrochemical performance is clarified. Structural uniform CNSs with controlled diameters, prepared via template-free interfacial copolymerization, are emerging as an ideal platform for investigating the ion transport behavior. It is found that ionic transport is significantly enhanced while the introduction of hollow cores with thinner shell, by virtue of the hollow nanopore-accelerated mass transport to reduce ion diffusion length. The proof-of-concept supercapacitors, constituted of carbons with diameter and shell thickness of 91 and 28 nm, respectively, can maintain highest capacitance retention ratio of 86% at a high sweep rate of 300 mVs-1 , also far outperforming the commercial activated carbon in terms of capacitance, rate capability, and surface efficiency, promising a brilliant application.

High-Strength, Thin, and Lightweight Solid Polymer Electrolyte for Superior All-Solid-State Sodium Metal Batteries.

The utilization of solid polymer electrolytes (SPEs) in all-solid-state sodium metal batteries has been extensively explored due to their excellent flexibility, processability adaptability to match roll-to-roll manufacturing processes, and good interfacial contact with a high-capacity Na anode; however, SPEs are still impeded by their inadequate mechanical strength, excessive thickness, and poor stability with Na anodes. Herein, a robust, thin, and cost-effective polyethylene (PE) film is employed as a skeleton for infiltrating poly(ethylene oxide)-sodium bis(trifluoromethanesulfonyl)imide (PEO/NaTFSI) to fabricate PE-PEO/NaTFSI SPE. The resulting SPE features a remarkable thickness of 25 µm, lightweight property (2.1 mg cm-2), superior mechanical strength (tensile strength = 100.3 MPa), and good flexibility. The SPE also shows an ionic conductivity of 9.4 × 10-5 S cm-1 at 60 °C and enhanced interfacial stability with a sodium metal anode. Benefiting from these advantages, the assembled Na-Na symmetric cells with PE-PEO/NaTFSI show a high critical current density (1 mA cm-2) and excellent long-term cycling stability (3000 h at 0.3 mA cm-2). The all-solid-state Na||PE-PEO/NaTFSI||Na3V2(PO4)3 coin cells exhibit a superior cycling performance, retaining 93% of the initial capacity for 190 cycles when matched with a 6 mg cm-2 cathode loading. Meanwhile, the pouch cell can work stably after abuse testing, proving its flexibility and safety. This work offers a promising strategy to simultaneously achieve thin, high-strength, and safe solid-state electrolytes for all-solid-state sodium metal batteries.

Rational Design of High-Performance PEO/Ceramic Composite Solid Electrolytes for Lithium Metal Batteries.

Composite solid electrolytes (CSEs) with poly(ethylene oxide) (PEO) have become fairly prevalent for fabricating high-performance solid-state lithium metal batteries due to their high Li+ solvating capability, flexible processability and low cost. However, unsatisfactory room-temperature ionic conductivity, weak interfacial compatibility and uncontrollable Li dendrite growth seriously hinder their progress. Enormous efforts have been devoted to combining PEO with ceramics either as fillers or major matrix with the rational design of two-phase architecture, spatial distribution and content, which is anticipated to hold the key to increasing ionic conductivity and resolving interfacial compatibility within CSEs and between CSEs/electrodes. Unfortunately, a comprehensive review exclusively discussing the design, preparation and application of PEO/ceramic-based CSEs is largely lacking, in spite of tremendous reviews dealing with a broad spectrum of polymers and ceramics. Consequently, this review targets recent advances in PEO/ceramic-based CSEs, starting with a brief introduction, followed by their ionic conduction mechanism, preparation methods, and then an emphasis on resolving ionic conductivity and interfacial compatibility. Afterward, their applications in solid-state lithium metal batteries with transition metal oxides and sulfur cathodes are summarized. Finally, a summary and outlook on existing challenges and future research directions are proposed.

Embedding of Laser Generated TiO2 in Poly(ethylene oxide) with Boosted Li+ Conduction for Solid-State Lithium Metal Batteries.

Poly(ethylene oxide) (PEO)-based solid polymer electrolytes are considered promising materials for realizing high-safety and high-energy-density lithium metal batteries. However, the high crystallinity of PEO at room temperature triggers low ionic conductivity and Li+ transference number, critically hindering practical applications in solid-state lithium metal batteries. Herein, we prepared nanosized TiO2 with enriched oxygen vacancies down to 13 nm as fillers by laser irradiation, which can be coated by in situ generated polyacetonitrile, ensuring good dispersibility in PEO. The electrolytes with nanosized TiO2 show a combination of high ionic conductivity, high Li+ transference number, superior electrochemical stability, and enhanced mechanical robustness. Accordingly, the lithium symmetric batteries with nanosized TiO2 composite solid electrolytes exhibit a stable cycling life up to 590 h at 0.25 mA cm-2. The full Li metal batteries paired with a LiFePO4 cathode deliver superior durability for 550 cycles. Moreover, the proof-of-concept pouch cells demonstrate excellent safety performance under various harsh conditions. This work provides a realistic guide in designing novel fillers to achieve stable operation of high-safety and energy-dense solid-state lithium metal batteries.

Laser-Derived Interfacial Confinement Enables Planar Growth of 2D SnS2 on Graphene for High-Flux Electron/Ion Bridging in Sodium Storage.

Establishing covalent heterointerfaces with face-to-face contact is promising for advanced energy storage, while challenge remains on how to inhibit the anisotropic growth of nucleated crystals on the matrix. Herein, face-to-face covalent bridging in-between the 2D-nanosheets/graphene heterostructure is constructed by intentionally prebonding of laser-manufactured amorphous and metastable nanoparticles on graphene, where the amorphous nanoparticles were designed via the competitive oxidation of Sn-O and Sn-S bonds, and metastable feature was employed to facilitate the formation of the C-S-Sn covalent bonding in-between the heterostructure. The face-to-face bridging of ultrathin SnS2 nanosheets on graphene enables the heterostructure huge covalent coupling area and high loading and thus renders unimpeded electron/ion transfer pathways and indestructible electrode structure, and impressive reversible capacity and rate capability for sodium-ion batteries, which rank among the top in records of the SnS2-based anodes. Present work thus provides an alternative of constructing heterostructures with planar interfaces for electrochemical energy storage and even beyond.

Arylboronic Acid Catalyzed Dehydrative Mono-/Dialkylation Reactions of ß-Ketoacids and Alcohols.

The dehydrative mono-/dialkylation reactions of alcohols and ß-ketoacids were realized under arylboronic acid catalysis, furnishing a series of ß-aryl ketones and ß-ketoesters in yields of 15-99%, with CO2 and H2O being the byproducts. In this context, the decarboxylative alkylation reaction occurred to give ß-aryl ketones at 50 °C, while the decarboxylation was suppressed to generate dialkylated ester products at 0 °C. A possible catalytic cycle was proposed based on control experiments.

Defected tungsten disulfide decorated CdS nanorods with covalent heterointerfaces for boosted photocatalytic H2 generation.

Owing to their intrinsic and pronounced charge carrier transport when facing the formidable challenge of inhibiting severe surface charge recombination, one-dimensional (1D) CdS nanostructures are promising for advancing high-yield hydrogen production. We herein demonstrate an efficient strategy of boosting interfacial carrier separation by heterostructuring 1D CdS with defective WS2. This process yields solid covalent interfaces for high flux carrier transfer that differ distinctively from those reported structures with physical contacts. As a nonnoble cocatalyst, WS2 can accept photogenerated electrons from CdS, and the sulfur vacancies existing at its edges can effectively trap electrons as active sites for H2 evolution. Moreover, due to its strong negative property, the H+ from the aqueous solution can gather around WS2. WS2 possesses a lower reaction barrier than CdS, which expedites the kinetic process for the reaction. The optimized sample exhibits a high photocatalytic H2 evolution rate of 183.4 µmol/h (10 mg photocatalyst), which is as far as we know among the top in the records for CdS-based photocatalysts. We believe this present work will be inspiring in addressing the interfacial charge carrier transfer by constructing covalent heterointerfaces.

Atomic Sn-enabled high-utilization, large-capacity, and long-life Na anode.

Constructing robust nucleation sites with an ultrafine size in a confined environment is essential toward simultaneously achieving superior utilization, high capacity, and long-term durability in Na metal-based energy storage, yet remains largely unexplored. Here, we report a previously unexplored design of spatially confined atomic Sn in hollow carbon spheres for homogeneous nucleation and dendrite-free growth. The designed architecture maximizes Sn utilization, prevents agglomeration, mitigates volume variation, and allows complete alloying-dealloying with high-affinity Sn as persistent nucleation sites, contrary to conventional spatially exposed large-size ones without dealloying. Thus, conformal deposition is achieved, rendering an exceptional capacity of 16 mAh cm-2 in half-cells and long cycling over 7000 hours in symmetric cells. Moreover, the well-known paradox is surmounted, delivering record-high Na utilization (e.g., 85%) and large capacity (e.g., 8 mAh cm-2) while maintaining extraordinary durability over 5000 hours, representing an important breakthrough for stabilizing Na anode.

Mesoporous Thin-Wall Molybdenum Nitride for Fast and Stable Na/Li Storage.

Sluggish reaction kinetics induced by the poor solid-state ion diffusion and low electrical conductivity of electrode materials are currently in conflict with increasing fast-charge needs for sodium-ion batteries (SIBs) based on conversion mechanism. Herein, mesoporous, conductive, thin-wall three-dimensional (3D) skeletons of molybdenum nitride (meso-Mo2N) were established and employed as anodes to facilitate the rate performance of SIBs. Mesoporous channels (∼9.3 nm) with very thin walls (<8 nm) and conductive networks in meso-Mo2N enable the rapid Na+ infiltrability/diffusion and fast electron migration, respectively. The facilitated ion diffusion/transfer ability is corroborated by cyclic voltammetry tests and galvanostatic intermittent titration technique with a higher Na+ diffusion coefficient and a larger Na+ diffusion-dominated capacity. Consequently, meso-Mo2N exhibits a superior rate capability and a steady specific capacity of 158 mAh g-1 at 1 A g-1 after 1000 cycles for SIBs, surpassing the nonporous Mo2N and even the previously reported Mo2N. Furthermore, the proof of concept can be also extended to enhanced Li storage. Such a mesostructured design with 3D mesoporous, conductive thin walls of electrodes is a promising strategy for achieving fast-charging and high-performance Na/Li storage.