In situ formation of ZnOx species for efficient propane dehydrogenation.

Propane dehydrogenation (PDH) to propene is an important alternative to oil-based cracking processes, to produce this industrially important platform chemical1,2. The commercial PDH technologies utilizing Cr-containing (refs. 3,4) or Pt-containing (refs. 5-8) catalysts suffer from the toxicity of Cr(VI) compounds or the need to use ecologically harmful chlorine for catalyst regeneration9. Here, we introduce a method for preparation of environmentally compatible supported catalysts based on commercial ZnO. This metal oxide and a support (zeolite or common metal oxide) are used as a physical mixture or in the form of two layers with ZnO as the upstream layer. Supported ZnOx species are in situ formed through a reaction of support OH groups with Zn atoms generated from ZnO upon reductive treatment above 550 °C. Using different complementary characterization methods, we identify the decisive role of defective OH groups for the formation of active ZnOx species. For benchmarking purposes, the developed ZnO-silicalite-1 and an analogue of commercial K-CrOx/Al2O3 were tested in the same setup under industrially relevant conditions at close propane conversion over about 400 h on propane stream. The developed catalyst reveals about three times higher propene productivity at similar propene selectivity.

A General Concept for the Electronic and Steric Modification of 1-Metallacyclobuta-2,3-dienes: A Case Study of Group 4 Metallocene Complexes.

The synthesis of group 4 metal 1-metallacyclobuta-2,3-dienes as organometallic analogues of elusive 1,2-cyclobutadiene has so far been limited to SiMe3 substituted examples. We present the synthesis of two Ph substituted dilithiated ligand precursors for the preparation of four new 1-metallacyclobuta-2,3-dienes [rac-(ebthi)M] (M=Ti, Zr; ebthi=1,2-ethylene-1,10-bis(η5-tetrahydroindenyl)). The organolithium compounds [Li2(RC3Ph)] (1 b: R=Ph, 1 c: R=SiMe3) as well as the metallacycles of the general formula [rac-(ebthi)M(R1C3R2)] (2 b: M=Ti, R1=R2=Ph, 2 c: M=Ti, R1=Ph, R2=SiMe3; 3 b: M=Zr, R1=R2=Ph; 3 c: M=Zr, R1=Ph, R2=SiMe3) were fully characterised. Single crystal X-ray diffraction and quantum chemical bond analysis of the Ti and Zr complexes reveal ligand influence on the biradicaloid character of the titanocene complexes. X-band EPR spectroscopy of structurally similar Ti complexes [rac-(ebthi)Ti(Me3SiC3SiMe3)] (2 a), 2 b, and 2 c was carried out to evaluate the accessibility of an EPR active triplet state. Cyclic voltammetry shows that introduction of Ph groups renders the complexes easier to reduce. 13C CPMAS NMR analysis provides insights into the cause of the low field shift of the resonances of metal-bonded carbon atoms and provides evidence of the absence of the ß-C-Ti interaction.

Aerobic Oxidative Synthesis of Formamides from Amines and Bioderived Formyl Surrogates.

Herein we present a new strategy for the oxidative synthesis of formamides from various types of amines and bioderived formyl sources (DHA, GLA and GLCA) and molecular oxygen (O2) as oxidant on g-C3N4 supported Cu catalysts. Combined characterization data from EPR, XAFS, XRD and XPS revealed the formation of single CuN4 sites on supported Cuphen/C3N4 catalysts. EPR spin trapping experiments disclosed ⋅OOH radicals as reactive oxygen species and ⋅NR1R2 radicals being responsible for the initial C-C bond cleavage. Control experiments and DFT calculations showed that the successive C-C bond cleavage in DHA proceeds via a reaction mechanism co-mediated by ⋅NR1R2 and ⋅OOH radicals based on the well-equilibrated CuII and CuI cycle. Our catalyst has much higher activity (TOF) than those based on noble metals.

Integrating Bifunctionality and Chemical Stability in Covalent Organic Frameworks via One-Pot Multicomponent Reactions for Solar-Driven H2O2 Production.

Multicomponent reactions (MCRs) can be used to introduce different functionalities into highly stable covalent organic frameworks (COFs). In this work, the irreversible three-component Doebner reaction is utilized to synthesize four chemically stable quinoline-4-carboxylic acid DMCR-COFs (DMCR-1-3 and DMCR-1NH) equipped with an acid-base bifunctionality. These DMCR-COFs show superior photocatalytic H2O2 evolution (one of the most important industrial oxidants) compared to the imine COF analogue (Imine-1). This is achieved with sacrificial oxidants but also in pure water and under an oxygen or air atmosphere. Furthermore, the DMCR-COFs show high photostability, durability, and recyclability. MCR-COFs thus provide a viable materials' platform for solar to chemical energy conversion.

Programmable Photocatalytic Activity of Multicomponent Covalent Organic Frameworks Used as Metallaphotocatalysts.

The multicomponent approach allows to incorporate several functionalities into a single covalent organic framework (COF) and consequently allows the construction of bifunctional materials for cooperative catalysis. The well-defined structure of such multicomponent COFs is furthermore ideally suited for structure-activity relationship studies. We report a series of multicomponent COFs that contain acridine- and 2,2'-bipyridine linkers connected through 1,3,5-benzenetrialdehyde derivatives. The acridine motif is responsible for broad light absorption, while the bipyridine unit enables complexation of nickel catalysts. These features enable the usage of the framework materials as catalysts for light-mediated carbon-heteroatom cross-couplings. Variation of the node units shows that the catalytic activity correlates to the keto-enamine tautomer isomerism. This allows switching between high charge-carrier mobility and persistent, localized charge-separated species depending on the nodes, a tool to tailor the materials for specific reactions. Moreover, nickel-loaded COFs are recyclable and catalyze cross-couplings even using red light irradiation.

Photomediated Hydro- and Deuterodecarboxylation of Pharmaceutically Relevant and Natural Aliphatic Carboxylic Acids.

Herein, we report a photomediated hydro- and deuterodecarboxylation of different primary, secondary, and tertiary carboxylic acids catalyzed by an organic pyrimidopteridine photoredox catalyst. The reaction was optimized by a statistical design of experiment (DoE). Under optimized reaction conditions, the conversion of commercially available nonsteroidal anti-inflammatory drugs (NSAIDs) in tablet form and on gram scale was realized. The scope of the application comprises primary, secondary, and tertiary aliphatic biologically active carboxylic acids. A deuterium incorporation of up to 95% by using D2O as inexpensive deuterium source was achieved. A sensitivity assessment as well as experiments aiding the elucidation of the reaction mechanism are discussed.

Aerobic Oxidation of 5-Hydroxymethylfurfural (HMF) in Aqueous Medium over Fe-Doped-Poly(heptazine imide) Photocatalysts: Unveiling the Bad Role of Hydroxyl Radical Generation on the Catalytic Performance.

5-hydroxymethylfurfural (HMF) oxidation in aqueous media using visible photocatalysis is a green and sustainable route for the valorization of lignocellulosic biomass derivatives. Several semiconductors have already been applied for this purpose; however, the use of Poly(heptazine imides), which has high crystallinity and a special cation exchange property that allows the replacement of the cation held between the layers of C3N4 structure by transition metal ions (TM), remains scarce. In this study, PHI(Na) was synthesized using a melamine/NaCl method and used as precursor to prepare metal (Fe, Co, Ni, or Cu)-doped PHI catalysts. The catalysts were tested for selective oxidation of HMF to 2,5-diformylfuran (DFF) in water and O2 atmosphere under blue LED radiation. The catalytic results revealed that the 0.1 wt% PHI(Fe) catalyst is the most efficient photocatalyst while higher Fe loading (1 and 2 wt%) favors the formation of Fe3+ clusters, which are responsible for the drop in HMF oxidation. Moreover, the 0.1 wt% PHI(Fe) photocatalyst has strong oxidative power due to its efficiency in H2O2 production, thus boosting the generation of nonselective hydroxyl radicals (●OH) via different pathways that can destroy HMF. We found that using 50 mM, the highest DFF production rate (393 µmol·h-1·g-1) was obtained in an aqueous medium under visible light radiation.

Water-Promoted Carbon-Carbon Bond Cleavage Employing a Reusable Fe Single-Atom Catalyst.

The development of methods for selective cleavage reactions of thermodynamically stable C-C/C=C bonds in a green manner is a challenging research field which is largely unexplored. Herein, we present a heterogeneous Fe-N-C catalyst with highly dispersed iron centers that allows for the oxidative C-C/C=C bond cleavage of amines, secondary alcohols, ketones, and olefins in the presence of air (O2 ) and water (H2 O). Mechanistic studies reveal the presence of water to be essential for the performance of the Fe-N-C system, boosting the product yield from <1 % to >90 %. Combined spectroscopic characterizations and control experiments suggest the singlet 1 O2 and hydroxide species generated from O2 and H2 O, respectively, take selectively part in the C-C bond cleavage. The broad applicability (>40 examples) even for complex drugs as well as high activity, selectivity, and durability under comparably mild conditions highlight this unique catalytic system.

Tailoring Active Cu2 O/Copper Interface Sites for N-Formylation of Aliphatic Primary Amines with CO2 /H2.

Heterogeneously catalyzed N-formylation of amines to formamide with CO2 /H2 is highly attractive for the valorization of CO2 . However, the relationship of the catalytic performance with the catalyst structure is still elusive. Herein, mixed valence catalysts containing Cu2 O/Cu interface sites were constructed for this transformation. Both aliphatic primary and secondary amines with diverse structures were efficiently converted into the desired formamides with good to excellent yields. Combined ex and in situ catalyst characterization revealed that the presence of Cu2 O/Cu interface sites was vital for the excellent catalytic activity. Density functional theory (DFT) calculations demonstrated that better catalytic activity of Cu2 O/Cu(111) than Cu(111) is attributed to the assistance of oxygen at the Cu2 O/Cu interface (Ointer ) in formation of Ointer -H moieties, which not only reduce the apparent barrier of HCOOH formation but also benefit the desorption of the desired N-formylated amine, leading to high activity and selectivity.

Unveiling the CO Oxidation Mechanism over a Molecularly Defined Copper Single-Atom Catalyst Supported on a Metal-Organic Framework.

Elucidating the reaction mechanism in heterogeneous catalysis is critically important for catalyst development, yet remains challenging because of the often unclear nature of the active sites. Using a molecularly defined copper single-atom catalyst supported by a UiO-66 metal-organic framework (Cu/UiO-66) allows a detailed mechanistic elucidation of the CO oxidation reaction. Based on a combination of in situ/operando spectroscopies, kinetic measurements including kinetic isotope effects, and density-functional-theory-based calculations, we identified the active site, reaction intermediates, and transition states of the dominant reaction cycle as well as the changes in oxidation/spin state during reaction. The reaction involves the continuous reactive dissociation of adsorbed O2 , by reaction of O2,ad with COad , leading to the formation of an O atom connecting the Cu center with a neighboring Zr4+ ion as the rate limiting step. This is removed in a second activated step.

Pyrimidopteridine-catalyzed Photo-mediated Hydroacetoxylation.

Herein we report a photo-mediated formal addition of carboxylic acids to activated alkenes catalyzed by a pyrimidopteridine photoredox catalyst. The decarboxylation of aliphatic carboxylic acids upon single-electron oxidation is countered in the presence of electron-rich alkenes and a hydroacetoxylation is observed. Mechanistic proposals have been made based on CV measurements, competitive Stern-Volmer quenching and EPR experiments. Evidence that tetra-N-substituted pyrimidopteridines function as dual photoredox and hydrogen atom transfer catalyst was supported by spectroscopic means.

Radical Reactivity of the Biradical [⋠P(µ-NTer)2 P⋠] and Isolation of a Persistent Phosphorus-Cantered Monoradical [⋠P(µ-NTer)2 P-Et].

The activation of C-Br bonds in various bromoalkanes by the biradical [⋅P(µ-NTer)2 P⋅] (1) (Ter=2,6-bis-(2,4,6-trimethylphenyl)-phenyl) is reported, yielding trans-addition products of the type [Br-P(µ-NTer)2 P-R] (2), so-called 1,3-substituted cyclo-1,3-diphospha-2,4-diazanes. This addition reaction, which represents a new easy approach to asymmetrically substituted cyclo-1,3-diphospha-2,4-diazanes, was investigated mechanistically by different spectroscopic methods (NMR, EPR, IR, Raman); the results suggested a stepwise radical reaction mechanism, as evidenced by the in-situ detection of the phosphorus-centered monoradical [⋅P(µ-NTer)2 P-R].< To provide further evidence for the radical mechanism, [⋅P(µ-NTer)2 P-Et] (3Et⋅) was synthesized directly by reduction of the bromoethane addition product [Br-P(µ-NTer)2 P-Et] (2 a) with magnesium, resulting in the formation of the persistent phosphorus-centered monoradical [⋅P(µ-NTer)2 P-Et], which could be isolated and fully characterized, including single-crystal X-ray diffraction. Comparison of the EPR spectrum of the radical intermediate in the addition reaction with that of the synthesized new [⋅P(µ-NTer)2 P-Et] radical clearly proves the existence of radicals over the course of the reaction of biradical [⋅P(µ-NTer)2 P⋅] (1) with bromoethane. Extensive DFT and coupled cluster calculations corroborate the experimental data for a radical mechanism in the reaction of biradical [⋅P(µ-NTer)2 P⋅] with EtBr. In the field of hetero-cyclobutane-1,3-diyls, the demonstration of a stepwise radical reaction represents a new aspect and closes the gap between P-centered biradicals and P-centered monoradicals in terms of radical reactivity.

A Persistent Phosphanyl-Substituted Thioketyl Radical Anion.

Alkali metal salts, M+ [Ter(iPr)P-C(=S)-P(iPr)2 S].- (M=Na, K; 2_M; Ter=2,6-bis-(2,4,6-trimethylphenyl)phenyl) containing a room-temperature-stable thioketyl radical anion were obtained by reduction of the thioketone precursor, Ter(iPr)P-C(=S)-P(iPr)2 S (1), with alkali metals (Na, K). Single-crystal X-ray studies as well as EPR spectroscopy revealed the unequivocal existence of a thioketyl radical anion in the solid state and in solution, respectively. The computed Mulliken spin density within 2_M is mainly located at the sulfur (49 %) and the carbonyl carbon (33 %) atoms. Upon adding [2.2.2]-cryptand to the radical species 2_K to minimize the interionic interaction, an activation reaction was observed, yielding a potassium salt with a phosphanyl thioether based anion, [K(crypt)]+ [Ter(iPr)P-C(-S-iPr)-P(iPr)2 S]- (3) as the product of an intermolecular shift of an iPr group from a second anion. The products were fully characterized and application of the radical anion as a reducing agent was demonstrated.

Iron-Catalyzed Alkoxycarbonylation of Alkyl Bromides via a Two-Electron Transfer Process.

Transition metal-catalyzed carbonylative cross-coupling reactions are some of the most widely used methods in organic synthesis. However, despite the obvious advantages of iron as an abundant and low toxicity transition metal catalyst, its practical application in carbonylation reaction remains largely unexplored. Here we report our recent study on Fe-catalyzed alkoxycarbonylation of alkyl halides. Mechanistic studies indicate that the reaction is catalyzed by an in situ generated Fe2- complex. This low-valent iron species activates alkyl bromides via a distinctive two-electron transfer (TET) process, whereas it proceeds via a single electron transfer (SET) process for alkyl iodides which is consistent with literature.

Acridine-Functionalized Covalent Organic Frameworks (COFs) as Photocatalysts for Metallaphotocatalytic C-N Cross-Coupling.

Covalent organic frameworks (COFs) are structurally tuneable, porous and crystalline polymers constructed through the covalent attachment of small organic building blocks as elementary units. Using the myriad of such building blocks, a broad spectrum of functionalities has been applied for COF syntheses for broad applications, including heterogeneous catalysis. Herein, we report the synthesis of a new family of porous and crystalline COFs using a novel acridine linker and benzene-1,3,5-tricarbaldehyde derivatives bearing a variable number of hydroxy groups. With the broad absorption in the visible light region, the COFs were applied as photocatalysts in metallaphotocatalytic C-N cross-coupling. The fully ß-ketoenamine linked COF showed the highest activity, due to the increased charge separation upon irradiation. The COF showed good to excellent yields for several aryl bromides, good recyclability and even catalyzed the organic transformation in presence of green light as energy source.

Simultaneously Tuning the Defects and Surface Properties of Ta3N5 Nanoparticles by Mg-Zr Codoping for Significantly Accelerated Photocatalytic H2 Evolution.

The simultaneous control of the defect species and surface properties of semiconducting materials is a crucial aspect of improving photocatalytic performance, yet it remains challenging. Here, we synthesized Mg-Zr-codoped single-crystalline Ta3N5 (Ta3N5:Mg+Zr) nanoparticles by a brief NH3 nitridation process, exhibiting photocatalytic water reduction activity 45 times greater than that of pristine Ta3N5 under visible light. A coherent picture of the relations between the defect species (comprising reduced Ta, nitrogen vacancies and oxygen impurities), surface properties (associated with dispersion of the Pt cocatalyst), charge carrier dynamics, and photocatalytic activities was drawn. The tuning of defects and simultaneous optimization of surface properties resulting from the codoping evidently resulted in the generation of high concentrations of long-lived electrons in this material as well as the efficient migration of these electrons to evenly distributed surface Pt sites. These effects greatly enhanced the photocatalytic activity. This work highlights the importance and feasibility of improving multiple properties of a catalytic material via a one-step strategy.

Visible-Light Photocatalytic Ozonation Using Graphitic C3N4 Catalysts: A Hydroxyl Radical Manufacturer for Wastewater Treatment.

Photocatalytic ozonation (light/O3/photocatalyst), an independent advanced oxidation process (AOP) proposed in 1996, has demonstrated over the past two decades its robust oxidation capacity and potential for practical wastewater treatment using sunlight and air (source of ozone). However, its development is restricted by two main issues: (i) a lack of breakthrough catalysts working under visible light (42-43% of sunlight in energy) as well as ambiguous property-activity relationships and (ii) unclear fundamental reasons underlying its high yield of hydroxyl radicals (•OH). In this Account, we summarize our substantial contributions to solving these issues, including (i) new-generation graphitic carbon nitride (g-C3N4) catalysts with excellent performance for photocatalytic ozonation under visible light, (ii) mechanisms of charge carrier transfer and reactive oxygen species (ROS) evolution, (iii) property-activity relationships, and (iv) chemical and working stabilities of g-C3N4 catalysts. On this basis, the principles/directions for future catalyst design/optimization are discussed, and a new concept of integrating solar photocatalytic ozonation with catalytic ozonation in one plant for continuous treatment of wastewater regardless of sunlight availability is proposed.The story starts from our finding that bulk/nanosheet/nanoporous g-C3N4 triggers a strong synergy between visible light (vis) and ozone, causing efficient mineralization of a wide variety of organic pollutants. Taking bulk g-C3N4 as an example, photocatalytic ozonation (vis/O3/g-C3N4) causes the mineralization of oxalic acid (a model pollutant) at a rate 95.8 times higher than the sum of photocatalytic oxidation (vis/O2/g-C3N4) and ozonation. To unravel this synergism, we developed a method based on in situ electron paramagnetic resonance (EPR) spectroscopy coupled with an online spin trapping technique for monitoring under realistic aqueous conditions the generation and transfer of photoinduced charge carriers and their reaction with dissolved O3/O2 to form ROS. The presence of only 2.1 mol % O3 in the inlet O2 gas stream can trap 1-2 times more conduction band electrons than pure O2 and shifts the reaction pathway from inefficient three-electron reduction of O2 (O2 → •O2- → HO2• → H2O2 → •OH) to more efficient one-electron reduction of O3 (O3 → •O3- → HO3• → •OH), thereby increasing the yield of •OH by a factor of 17. Next, we confirmed band structure as a decisive factor for catalytic performance and established a new concept for resolving this relationship, involving "the number of reactive charge carriers". An optimum balance between the number and reducing ability of photoinduced electrons, which depends on the interplay between the band gap and the conduction band edge potential, is a key property for highly active g-C3N4 catalysts. Furthermore, we demonstrated that g-C3N4 is chemically stable toward O3 and •O2- but that •OH can tear and oxidize its heptazine units to form cyameluric acid and further release nitrates into the aqueous environment. Fortunately, •OH usually attacks organic pollutants in wastewater in preference to g-C3N4, thus preserving the working stability of g-C3N4 and the steady operation of photocatalytic ozonation. This AOP, which serves as an in situ •OH manufacturer, would be of interest to a broad chemistry world since •OH radicals are active species not only for environmental applications but also for organic synthesis, polymerization, zeolite synthesis, and protein footprinting.

Supported CuII Single-Ion Catalyst for Total Carbon Utilization of C2 and C3 Biomass-Based Platform Molecules in the N-Formylation of Amines.

The shift from fossil carbon sources to renewable ones is vital for developing sustainable chemical processes to produce valuable chemicals. In this work, value-added formamides were synthesized in good yields by the reaction of amines with C2 and C3 biomass-based platform molecules such as glycolic acid, 1,3-dihydroxyacetone and glyceraldehyde. These feedstocks were selectively converted by catalysts based on Cu-containing zeolite 5A through the in situ formation of carbonyl-containing intermediates. To the best of our knowledge, this is the first example in which all the carbon atoms in biomass-based feedstocks could be amidated to produce formamide. Combined catalyst characterization results revealed preferably single CuII sites on the surface of Cu/5A, some of which form small clusters, but without direct linking via oxygen bridges. By combining the results of electron paramagnetic resonance (EPR) spin-trapping, operando attenuated total reflection (ATR) IR spectroscopy and control experiments, it was found that the formation of formamides might involve a HCOOH-like intermediate and . NHPh radicals, in which the selective formation of . OOH radicals might play a key role.

Visible-Light-Induced Palladium-Catalyzed Dehydrogenative Carbonylation of Amines to Oxalamides.

The palladium-catalyzed oxidative carbonylation of amines toward the synthesis of oxalamides has been established around 30 years ago and it usually needs the presence of (over)stoichiometric amounts of oxidant. In this work, the first transformation of this type in which the oxidant was replaced by visible light is described. The new approach uses a simple robust Pd complex, which can even be partially recycled. A mechanistic reason is provided and supported by control experiments and EPR studies, showing that PdI was formed and Pd0 was the active species. Both nitrogen- and the intermediate acyl radical can be detected. Moreover, the formation of hydrogen was confirmed by gas GC.