High Resolution Membrane Structures within Hybrid Lipid-Polymer Vesicles Revealed by Combining X-Ray Scattering and Electron Microscopy.

Hybrid vesicles consisting of phospholipids and block-copolymers are increasingly finding applications in science and technology. Herein, small angle X-ray scattering (SAXS) and cryo-electron tomography (cryo-ET) are used to obtain detailed structural information about hybrid vesicles with different ratios of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and poly(1,2-butadiene-block-ethylene oxide) (PBd22 -PEO14 , Ms  = 1800 g mol-1 ). Using single particle analysis (SPA) the authors are able to further interpret the information gained from SAXS and cryo-ET experiments, showing that increasing PBd22 -PEO14 mole fraction increases the membrane thickness from 52 Å for a pure lipid system to 97 Å for pure PBd22 -PEO14 vesicles. Two vesicle populations with different membrane thicknesses in hybrid vesicle samples are found. As these lipids and polymers are reported to homogeneously mix, bistability is inferred between weak and strong interdigitation regimes of PBd22 -PEO14 within the hybrid membranes. It is hypothesized that membranes of intermediate structure are not energetically favorable. Therefore, each vesicle exists in one of these two membrane structures, which are assumed to have comparable free energies. The authors conclude that, by combining biophysical methods, accurate determination of the influence of composition on the structural properties of hybrid membranes is achieved, revealing that two distinct membranes structures can coexist in homogeneously mixed lipid-polymer hybrid vesicles.

Correction: Planar confined water organisation in lipid bilayer stacks of phosphatidylcholine and phosphatidylethanolamine.

Correction for 'Planar confined water organisation in lipid bilayer stacks of phosphatidylcholine and phosphatidylethanolamine' by Gerome Vancuylenberg et al., Soft Matter, 2023, https://doi.org/10.1039/D3SM00387F.

Planar confined water organisation in lipid bilayer stacks of phosphatidylcholine and phosphatidylethanolamine.

Phospholipid-based liposomes are abundantly studied in biomembrane research and used in numerous medical and biotechnological applications. Despite current extensive knowledge on membrane nanostructure and its mechanical properties under various environmental conditions, there is still a lack of understanding on interfacial lipid-water interactions. In this work, the nature of the confined water layer for L-α-phosphatidylcholine (egg-PC), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 1,2-dimyristoyl-sn-glycerol-3-phosphocholine (DMPC) and 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (DMPE) in the fluid lamellar phase of multilamellar vesicles was investigated. A new model for describing three different water regions is proposed, which have been characterised using a combination of small angle X-ray scattering (SAXS) and densitometry. The three regions concern (i) 'the headgroup water', (ii) 'perturbed water' near the membrane/water interface and (iii) a core layer of 'free water' (unperturbed water). The behaviour of all three layers is discussed as a function of temperature, concerning influences of chain saturation and headgroup type. While the overall water layer and perturbed water layer thickness increase with temperature, the free water layer displays the opposite trend for PCs, and in PEs is completely absent. Furthermore, an estimate of the temperature dependent headgroup orientation is given for both, PCs and PEs. The newly presented structural data deduced from the three-water region model will be useful for future refined molecular dynamics simulations and allow a better theoretical understanding of the attractive van der Waals force between adjacent membranes.

From angular to round: in depth interfacial analysis of binary phosphatidylethanolamine mixtures in the inverse hexagonal phase.

Packing stress in the lipidic inverse hexagonal HII phase arises from the necessity of the ideally cylinder-shaped micelles to fill out the hexagonally-shaped Wigner-Seitz unit cell. Thus, hydrocarbon chains stretch towards the corners and compress in the direction of the flat side of the hexagonal unit cell. Additionally, the lipid/water interface deviates from being perfectly circular. To study this packing frustration in greater detail, we have doped 1-palmitoyl-2-oleoyl-sn-phosphatidylethanolamine (POPE) with increasing molar concentrations of 1,2-palmitoyl-sn-phosphatidylethanolamine (DPPE: 0 to 15 mol%). Due to its effectively longer hydrophobic tails, DPPE tends to aggregate in the corner regions of the unit cell, and thus, increases the circularity of the lipid/water interface. From small angle X-ray diffraction (SAXD) we determined electron density maps. Using those, we analysed the size, shape and homogeneity of the lipid/water interface as well as that of the methyl trough region. At 6 and 9 mol% DPPE the nanotubular water core most closely resembles a circle; further to this, in comparison to its neighbouring concentrations, the 9 mol% DPPE sample has the smallest water core area and smallest number of lipids per circumference, best alleviating the packing stress. Finally, a three-water layer model was applied, discerning headgroup, perturbed and free water, demonstrating that the hexagonal phase is most stable in the direction of the flat faces (compression zones) and least stable towards the vertices of the unit cell (decompression zones).

Membrane mixing and dynamics in hybrid POPC/poly(1,2-butadiene-block-ethylene oxide) (PBd-b-PEO) lipid/block co-polymer giant vesicles.

Lipids and block copolymers can individually self-assemble into vesicles, each with their own particular benefits and limitations. Combining polymers with lipids allows for further optimisation of the vesicle membranes for bionanotechnology applications. Here, POPC lipid is mixed with poly(1,2-butadiene-block-ethylene oxide) of two different molecular weights (PBd22-PEO14, Mr = 1800 g mol-1 and PBd12-PEO11, Mr = 1150 g mol-1) in order to investigate how increasing the polymer fraction affects membrane mixing, hydration and fluidity. Intensity contributions of fluorescently labelled lipid and polymer within mixed GUV membranes confirm membrane homogeneity within the hybrids. General polarisation measurements of Laurdan in GUVs showed little change in membrane hydration as polymer fraction is increased, which suggests good structural compatibility between lipids and polymers that gives rise to well-mixed vesicles. Membrane fluidity in hybrid GUVs was found to decrease non-linearly with increasing polymer fraction. However, the diffusion coefficients for the fluorescent polymer in hybrid membranes did not change significantly with increasing polymer content. While increasing the polymer fraction does reduce the movement of lipids through a polymer-rich matrix, insignificant difference in diffusion coefficients of the polymer suggests that its diffusion is minimally affected by increasing lipid composition in the range studied. These results lay further foundations for the wider development of hybrid vesicles with controlled properties for advanced biotechnologies.

Breaking Isolation to Form New Networks: pH-Triggered Changes in Connectivity inside Lipid Nanoparticles.

There is a growing demand to develop smart nanomaterials that are structure-responsive as they have the potential to offer enhanced dose, temporal and spatial control of compounds and chemical processes. The naturally occurring pH gradients found throughout the body make pH an attractive stimulus for guiding the response of a nanocarrier to specific locations or (sub)cellular compartments in the body. Here we have engineered highly sensitive lyotropic liquid crystalline nanoparticles that reversibly respond to changes in pH by altering the connectivity within their structure at physiological temperatures. At pH 7.4, the nanoparticles have an internal structure consisting of discontinuous inverse micellar "aqueous pockets" based on space group Fd3m. When the pH is ≤6, the nanoparticles change from a compartmentalized to an accessible porous internal structure based on a 2D inverse hexagonal phase (plane group p6mm). We validate the internal symmetry of the nanoparticles using small-angle X-ray scattering and cryogenic transmission electron microscopy. The high-resolution electron microscopy images obtained have allowed us for the first time to directly visualize the internal structure of the Fd3m nanoparticles and resolve the two different-sized inverse micelles that make up the structural motif within the Fd3m unit cell, which upon structural analysis reveal excellent agreement with theoretical geometrical models.

Structure and Dynamics of Dioleoyl-Phosphatidylcholine Bilayers under the Influence of Quercetin and Rutin.

Quercetin and rutin, two widely studied flavonoids with applications foreseen in the sectors of pharmaceutical and cosmetic industries, have been chosen as model compounds for a detailed structural and dynamical investigation onto their influence on fluid lipid bilayers. Combining global small angle X-ray scattering analysis with molecular dynamics, various changes in the properties of dioleoyl-phosphatidylcholine (DOPC) bilayers have been determined. The solubility of quercetin in DOPC membranes is assured up to 12 mol %, whereas rutin, with additional glucose and rhamnose groups, are fully soluble only up to 6 mol %. Both flavonoids induce an increase in membrane undulations and thin the bilayers slightly (<1 Å) in a concentration dependent manner, wherein quercetin shows a stronger effect. Concomitantly, in the order of 2-4%, the adjacent bilayer distance increases with the flavonoid's concentration. Partial molecular areas of quercetin and rutin are determined to be 26 and 51 Å2, respectively. Simulated averaged areas per molecule confirm these estimates. A 60° tilted orientation of quercetin is observed with respect to the bilayer normal, whereas the flavonoid moiety of rutin is oriented more perpendicular (α-angle 30°) to the membrane surface. Both flavonoid moieties are located at a depth of 12 and 16 Å for quercetin and rutin, respectively, while their anionic forms display a location closer to the polar interface. Finally, at both simulated concentrations (1.5 and 12 mol %), DOPC-rutin systems induce a stronger packing of the pure DOPC lipid bilayer, mainly due to stronger attractive electrostatic interactions in the polar lipid head region.

Structural Transformation in Vesicles upon Hydrolysis of Phosphatidylethanolamine and Phosphatidylcholine with Phospholipase C.

This study provides insights into dynamic nanostructural changes in phospholipid systems during hydrolysis with phospholipase C, the fate of the hydrolysis products, and the kinetics of lipolysis. The effect of lipid restructuring of the vesicle was investigated using small-angle X-ray scattering and cryogenic scanning electron microscopy. The rate and extent of phospholipid hydrolysis were quantified using nuclear magnetic resonance. Hydrolysis of two phospholipids, phosphatidylethanolamine (PE) and phosphatidylcholine (PC), results in the cleavage of the molecular headgroup, causing two strikingly different changes in lipid self-assembly. The diacylglycerol product of PC escapes the lipid bilayer, whereas the diacylglycerol product adopts a different configuration within the lipid bilayer of the PE vesicles. These results are then discussed concerning the change of the lipid configuration upon the lipid membrane and its potential implications in vivo, which is of significant importance for the detailed understanding of the fate of lipidic particles and the rational design of enzyme-responsive lipid-based drug delivery systems.

A reconstitution method for integral membrane proteins in hybrid lipid-polymer vesicles for enhanced functional durability.

Hybrid vesicles composed of lipids and block copolymers hold promise for increasing liposome stability and providing a stable environment for membrane proteins. Recently we reported the successful functional reconstitution of the integral membrane protein cytochrome bo3 (ubiquinol oxidase) into hybrid vesicles composed of a blend of phospholipids and a block copolymer (PBd-PEO). We demonstrated that these novel membrane environments stabilise the enzymes' activity, prolonging their functional lifetime [Chem. Commun. 52 (2016) 11020-11023]. This approach holds great promise for applications of membrane proteins where enhanced durability, stability and shelf-life will be essential to creating a viable technology. Here we present a detailed account of our methods for membrane protein reconstitution into hybrid vesicles and discuss tips and challenges when using block copolymers compared to pure phospholipid systems that are more common materials for this purpose. We also extend the characterisation of these hybrid vesicles beyond what we have previously reported and show: (i) hybrid membranes are less permeable to protons than phospholipid bilayers; (ii) extended enzyme activity data is presented over a period of 500 days, which fully reveals the truly remarkable enhancement in functional lifetime that hybrid vesicles facilitate.

Early stages of fat crystallisation evaluated by low-field NMR and small-angle X-ray scattering.

Low-field time-domain nuclear magnetic resonance (NMR; 20 MHz) is commonly used in the studies of fats in the form of solid fat content (SFC) measurements. However, it has the disadvantage of low sensitivity to small amounts of crystalline material (0.5%), thus often incorrectly determining crystallisation induction times. From spin-lattice relaxation rate measurements (R1 ) during the isothermal crystallisation measurements of cocoa butter between 0.01 and 10 MHz using fast field cycling NMR, we learnt previously that the most sensitive frequency region is below 1 MHz. Thus, we focused on analysing our 10-kHz data in detail, by observing the time dependence of R1 and comparing it with standard SFCNMR and SFC determinations from small-angle X-ray scattering (SFCSAXS ). Although not reflecting directly the SFC, the R1 at this low frequency is very sensitive to changes in molecular aggregation and hence potentially serving as an alternative for determination of crystallisation induction times. Alongside R1 , we also show that SFCSAXS is more sensitive to early stages of crystallisation, that is, standard SFCNMR determinations become more relevant when crystal growth starts to dominate the crystallisation process but fail to pick up earlier crystallisation steps. This paper thus demonstrates the potential of studying triacylglycerols at frequencies below 1 MHz for obtaining further understanding of the early crystallisation stages of fats and presents an alternative and complementary method to estimate SFC by SAXS.

Bile Salts Caught in the Act: From Emulsification to Nanostructural Reorganization of Lipid Self-Assemblies.

Bile salts (BSs) are important for the digestion and absorption of fats and fat-soluble vitamins in the small intestine. In this work, we scrutinized, with small-angle X-ray scattering (SAXS), the crucial functions of bile salts beyond their capacity for the interfacial stabilization of submicrometer-sized lipid particles. By studying a wide compositional range of BS-lipid dispersions using two widely applied lipids for drug-delivery systems (one a monoglyceride being stabilizer-sensitive and the other an aliphatic alcohol being relatively stabilizer-insensitive), we identified the necessary BS to lipid ratios to guarantee full emulsification. A novel ad hoc developed global small-angle-X-ray scattering analysis method revealed that the addition of BS hardly changes the bilayer thicknesses in bicontinuous phases, while significant membrane thinning is observed in the coexisting fluid lamellar phase. Furthermore, we show that a BS strongly decreases the average critical packing parameter. At increasing BS concentration, the order of phases formed is (i) the bicontinuous diamond cubic ( Pn3 m), (ii) the bicontinuous primitive cubic ( Im3 m), and (iii) the fluid lamellar phase ( Lα). These distinctive findings on BS-driven "emulsification" and "membrane curvature reduction" provide new molecular-scale insights for the understanding of the interfacial action of bile salts on lipid assemblies.

Exploring the interactions of irbesartan and irbesartan-2-hydroxypropyl-ß-cyclodextrin complex with model membranes.

The interactions of irbesartan (IRB) and irbesartan-2-hydroxypropyl-ß-cyclodextrin (HP-ß-CD) complex with dipalmitoyl phosphatidylcholine (DPPC) bilayers have been explored utilizing an array of biophysical techniques ranging from differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS), ESI mass spectrometry (ESI-MS) and solid state nuclear magnetic resonance (ssNMR). Molecular dynamics (MD) calculations have been also conducted to complement the experimental results. Irbesartan was found to be embedded in the lipid membrane core and to affect the phase transition properties of the DPPC bilayers. SAXS studies revealed that irbesartan alone does not display perfect solvation since some coexisting irbesartan crystallites are present. In its complexed form IRB gets fully solvated in the membranes showing that encapsulation of IRB in HP-ß-CD may have beneficial effects in the ADME properties of this drug. MD experiments revealed the topological and orientational integration of irbesartan into the phospholipid bilayer being placed at about 1nm from the membrane centre.

Heteroprotein Complex Formation of Bovine Lactoferrin and Pea Protein Isolate: A Multiscale Structural Analysis.

Associative electrostatic interactions between two oppositely charged globular proteins, lactoferrin (LF) and pea protein isolate (PPI), the latter being a mixture of vicilin, legumin, and convicilin, was studied with a specific PPI/LF molar ratio at room temperature. Structural aspects of the electrostatic complexes probed at different length scales were investigated as a function of pH by means of different complementary techniques, namely, with dynamic light scattering, small-angle X-ray scattering (SAXS), turbidity measurements, and atomic force microscopy (AFM). Irrespective of the applied techniques, the results consistently displayed that complexation between LF and PPI did occur. In an optimum narrow range of pH 5.0-5.8, a viscous liquid phase of complex coacervate was obtained upon mild centrifugation of the turbid LF-PPI mixture with a maximum Rh, turbidity and the ζ-potential being close to zero observed at pH 5.4. In particular, the SAXS data demonstrated that the coacervates were densely assembled with a roughly spherical size distribution exhibiting a maximum extension of ∼80 nm at pH 5.4. Equally, AFM image analysis showed size distributions containing most frequent cluster sizes around 40-80 nm with spherical to elliptical shapes (axis aspect ratio ≤ 2) as well as less frequent elongated to chainlike structures. The most frequently observed compact complexes, we identify as mainly leading to LF-PPI coacervation, whereas for the less frequent chain-like aggregates, we hypothesize that additionally PPI-PPI facilitated complexes exist.

Synthesis and organogelating behaviour of amino acid-functionalised triphenylenes.

Four novel amino acid-functionalised triphenylenes have been prepared with glycine, l-alanine, l-phenylalanine and l-tryptophan ethyl ester side-chains. The glycine derivative is a good gelator of chloroform, the alanine derivative gels ethanol and toluene, and the phenylalanine derivative gels benzene and toluene. The tryptophan derivative does not gel any of the solvents tested, most probably due to its more bulky structure, but forms microspheres by evaporation-induced self-assembly. The self-assembly properties of the π-gelators have been investigated using infrared, UV-absorption and fluorescence spectroscopy, concentration- and temperature-dependent NMR, and X-ray scattering experiments on dried xerogel as well as the wet organogel. The latter experiments suggest the glycine gel in chloroform includes columnar aggregates, with an overall disordered columnar oblique mesophase. These compounds are of interest because of the well-known hole-transporting properties of triphenylene liquid crystals: 1-D columnar assemblies of these compounds may find applications in organic electronic devices.

Experimental Modeling of Flavonoid-Biomembrane Interactions.

Nonspecific interactions of flavonoids with lipids can alter the membrane's features (e.g., thickness and fluctuations) as well as influence their therapeutic potentials. However, relatively little is known about the details of how flavonoids interact with lipid components. Structure-dependent interactions of a variety of flavonoids with phospholipid monolayers on a mercury (Hg) film electrode were established by rapid cyclic voltammetry (RCV). The data revealed that flavonoids adopting a planar configuration altered the membrane properties more significantly than nonplanar flavonoids. Quercetin, rutin, and tiliroside were selected for follow-up experiments with Langmuir monolayers, Brewster angle microscopy (BAM), and small-angle X-ray scattering (SAXS). Relaxation phenomena in DOPC monolayers and visualization of the surface with BAM revealed a pronounced monolayer stabilization effect with both quercetin and tiliroside, whereas rutin disrupted the monolayer structure rendering the surface entirely smooth. SAXS showed a monotonous membrane thinning for all compounds studied associated with an increase in the mean fluctuations of the membrane. Rutin, quercetin, and tiliroside decreased the bilayer thickness of DOPC by ∼0.45, 0.8, and 1.1 Šat 6 mol %, respectively. In addition to the novelty of using lipid monolayers to systematically characterize the structure-activity relationship (SAR) of a variety of flavonoids, this is the first report investigating the effect of tiliroside with biomimetic membrane models. All the flavonoids studied are believed to be localized in the lipid/water interface region. Both this localization and the membrane perturbations have implications for their therapeutic activity.

Effects of High Pressure on Internally Self-Assembled Lipid Nanoparticles: A Synchrotron Small-Angle X-ray Scattering (SAXS) Study.

We present the first report on the effects of hydrostatic pressure on colloidally stabilized lipid nanoparticles enveloping inverse nonlamellar self-assemblies in their interiors. These internal self-assemblies were systematically tuned into bicontinuous cubic (Pn3m and Im3m), micellar cubic (Fd3m), hexagonal (H2), and inverse micellar (L2) phases by regulating the lipid/oil ratio as the hydrostatic pressure was varied from atmospheric pressure to 1200 bar and back to atmospheric pressure. The effects of pressure on these lipid nanoparticles were compared with those on their equilibrium bulk, nondispersed counterparts, namely, inverse nonlamellar liquid-crystalline phases and micellar solutions under excess-water conditions, using the synchrotron small-angle X-ray scattering (SAXS) technique. In the applied pressure range, induced phase transitions were observed solely in fully hydrated bulk samples, whereas the internal self-assemblies of the corresponding lipid nanoparticles displayed only pressure-modulated single phases. Interestingly, both the lattice parameters and the linear pressure expansion coefficients were larger for the self-assemblies enveloped inside the lipid nanoparticles as compared to the bulk states. This behavior can, in part, be attributed to enhanced lipid layer undulations in the lipid particles in addition to induced swelling effects in the presence of the triblock copolymer F127. The bicontinuous cubic phases both in the bulk state and inside lipid cubosome nanoparticles swell on compression, even as both keep swelling further upon decompression at relatively high pressures before shrinking again at ambient pressures. The pressure dependence of the phases is also modulated by the concentration of the solubilized oil (tetradecane). These studies demonstrate the tolerance of lipid nanoparticles [cubosomes, hexosomes, micellar cubosomes, and emulsified microemulsions (EMEs)] for high pressures, confirming their robustness for various technological applications.

Stability of the Metastable α-Polymorph in Solid Triglyceride Drug-Carrier Nanoparticles.

Colloidal dispersions of crystalline nonpolar lipids are under intensive investigation as carrier systems in pharmaceutics and nutrition. In this context, the controlled preparation of particles in a metastable polymorphic state is of some interest for the delivery of active substances. In the present study, tristearin particles stabilized with three α-polymorph-preserving emulsifier regimes ((I) sodium glycocholate/saturated long-chain phospholipids, (II) sodium glycocholate, and (III) poly(vinyl alcohol) (PVA)) were investigated concerning the stability of the metastable α-polymorph after controlled crystallization of the particles from the melt. Upon long-term storage, the α-polymorph was preserved best in PVA-stabilized dispersions, followed by those stabilized with the glycocholate/phospholipid mixture and finally those stabilized solely with the bile salt. In particular for rapidly crystallized nanoparticles, the formation of an α-polymorph with highly reduced lamellarity was observed. According to time-/temperature-resolved synchrotron X-ray diffraction analysis with simultaneous DSC (differential scanning calorimetry) studies, this less-ordered α-polymorph transformed into the common, lamellar α-form upon heating. Although the presence of the less-ordered form is probably related to the extraordinarily high stability of the metastable α-polymorph observed in some of the dispersions, it could not completely prevent the transition into the stable ß-polymorph. The higher the transition temperature of the less-ordered α-form to the ordered one, the slower was the polymorphic transition to the stable ß-polymorph. To estimate the polymorphic stability of the differently stabilized particles upon isothermal long-term storage, standard DSC measurements on samples stored at 23 °C for 4 weeks seem to be of predictive value.

A synchrotron X-ray scattering study of the crystallization behavior of mixtures of confectionary triacylglycerides: Effect of chemical composition and shear on polymorphism and kinetics.

Cocoa butter equivalents (CBE) are mixtures of triglycerides from multiple sources (e.g., sunflower oil, mango kernel and sal), which resemble cocoa butter (CB) in both physical and chemical properties. Despite being widely used to replace CB in chocolate products, the crystallization behavior of many CBEs is still poorly understood. The aim of this work was to develop a fundamental understanding, at the molecular level, of the crystallization behavior of selected CBEs, and compare it with that of CB. Chromatography was used to determine the composition of CBEs, in terms of fatty acids and triacylglycerides (TAGs), while their thermodynamic behavior and crystallization kinetics were studied using polarized microscopy, differential calorimetry and three different synchrotron X-ray scattering setups. CBEs of different origin and chemical composition (e.g., different ratios of the main CB TAGs, namely POP, SOS and POS) crystallized in different polymorphs and with different kinetics of nucleation, growth and polymorphic transformation. SOS rich CBEs presented showed more polymorphs than CB and POP rich samples; whereas, CBEs with high concentration of POP showed slow kinetic of polymorphic transformation towards the stable ß(3L) form. Additionally, it was observed that the presence of small amounts (<1% w/w) of specific TAGs, such as OOO, PPP or SSS, could significantly affect the crystallization behavior of CBEs and CBs in terms of kinetics of polymorphic transformation and number of phases detected (multiple high melting ß(2L) polymorphs were identified in all samples studied). Finally, it was found that, regardless of the CBE composition, the presence of shear could promote the formation of stable ß polymorphs over metastable ß' and γ forms, and reduced the size of the crystal agglomerates formed due to increased secondary nucleation.

Comparative study of the AT1 receptor prodrug antagonist candesartan cilexetil with other sartans on the interactions with membrane bilayers.

Drug-membrane interactions of the candesartan cilexetil (TCV-116) have been studied on molecular basis by applying various complementary biophysical techniques namely differential scanning calorimetry (DSC), Raman spectroscopy, small and wide angle X-ray scattering (SAXS and WAXS), solution ¹H and ¹³C nuclear magnetic resonance (NMR) and solid state ¹³C and ³¹P (NMR) spectroscopies. In addition, ³¹P cross polarization (CP) NMR broadline fitting methodology in combination with ab initio computations has been applied. Finally molecular dynamics (MD) was applied to find the low energy conformation and position of candesartan cilexetil in the bilayers. Thus, the experimental results complemented with in silico MD results provided information on the localization, orientation, and dynamic properties of TCV-116 in the lipidic environment. The effects of this prodrug have been compared with other AT1 receptor antagonists hitherto studied. The prodrug TCV-116 as other sartans has been found to be accommodated in the polar/apolar interface of the bilayer. In particular, it anchors in the mesophase region of the lipid bilayers with the tetrazole group oriented toward the polar headgroup spanning from water interface toward the mesophase and upper segment of the hydrophobic region. In spite of their localization identity, their thermal and dynamic effects are distinct pointing out that each sartan has its own fingerprint of action in the membrane bilayer, which is determined by the parameters derived from the above mentioned biophysical techniques.

Control and analysis of oriented thin films of lipid inverse bicontinuous cubic phases using grazing incidence small-angle X-ray scattering.

Lipid cubic phases are complex nanostructures that form naturally in a variety of biological systems, with applications including drug delivery and nanotemplating. Most X-ray scattering studies on lipid cubic phases have used unoriented polydomain samples as either bulk gels or suspensions of micrometer-sized cubosomes. We present a method of investigating cubic phases in a new form, as supported thin films that can be analyzed using grazing incidence small-angle X-ray scattering (GISAXS). We present GISAXS data on three lipid systems: phytantriol and two grades of monoolein (research and industrial). The use of thin films brings a number of advantages. First, the samples exhibit a high degree of uniaxial orientation about the substrate normal. Second, the new morphology allows precise control of the substrate mesophase geometry and lattice parameter using a controlled temperature and humidity environment, and we demonstrate the controllable formation of oriented diamond and gyroid inverse bicontinuous cubic along with lamellar phases. Finally, the thin film morphology allows the induction of reversible phase transitions between these mesophase structures by changes in humidity on subminute time scales, and we present time-resolved GISAXS data monitoring these transformations.