RESUMO
Millions of years of evolution have allowed animals to develop unusual locomotion capabilities. A striking example is the legless-jumping of click beetles and trap-jaw ants, which jump more than 10 times their body length. Their delicate musculoskeletal system amplifies their muscles' power. It is challenging to engineer insect-scale jumpers that use onboard actuators for both elastic energy storage and power amplification. Typical jumpers require a combination of at least two actuator mechanisms for elastic energy storage and jump triggering, leading to complex designs having many parts. Here, we report the new concept of dynamic buckling cascading, in which a single unidirectional actuation stroke drives an elastic beam through a sequence of energy-storing buckling modes automatically followed by spontaneous impulsive snapping at a critical triggering threshold. Integrating this cascade in a robot enables jumping with unidirectional muscles and power amplification (JUMPA). These JUMPA systems use a single lightweight mechanism for energy storage and release with a mass of 1.6 g and 2 cm length and jump up to 0.9 m, 40 times their body length. They jump repeatedly by reengaging the latch and using coiled artificial muscles to restore elastic energy. The robots reach their performance limits guided by theoretical analysis of snap-through and momentum exchange during ground collision. These jumpers reach the energy densities typical of the best macroscale jumping robots, while also matching the rapid escape times of jumping insects, thus demonstrating the path toward future applications including proximity sensing, inspection, and search and rescue.
Assuntos
Formigas , Besouros , Robótica , Animais , Locomoção/fisiologia , Músculos , Fenômenos BiomecânicosRESUMO
BACKGROUND: Metformin has antiviral activity against RNA viruses including severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The mechanism appears to be suppression of protein translation via targeting the host mechanistic target of rapamycin pathway. In the COVID-OUT randomized trial for outpatient coronavirus disease 2019 (COVID-19), metformin reduced the odds of hospitalizations/death through 28 days by 58%, of emergency department visits/hospitalizations/death through 14 days by 42%, and of long COVID through 10 months by 42%. METHODS: COVID-OUT was a 2 × 3 randomized, placebo-controlled, double-blind trial that assessed metformin, fluvoxamine, and ivermectin; 999 participants self-collected anterior nasal swabs on day 1 (n = 945), day 5 (n = 871), and day 10 (n = 775). Viral load was quantified using reverse-transcription quantitative polymerase chain reaction. RESULTS: The mean SARS-CoV-2 viral load was reduced 3.6-fold with metformin relative to placebo (-0.56 log10 copies/mL; 95% confidence interval [CI], -1.05 to -.06; P = .027). Those who received metformin were less likely to have a detectable viral load than placebo at day 5 or day 10 (odds ratio [OR], 0.72; 95% CI, .55 to .94). Viral rebound, defined as a higher viral load at day 10 than day 5, was less frequent with metformin (3.28%) than placebo (5.95%; OR, 0.68; 95% CI, .36 to 1.29). The metformin effect was consistent across subgroups and increased over time. Neither ivermectin nor fluvoxamine showed effect over placebo. CONCLUSIONS: In this randomized, placebo-controlled trial of outpatient treatment of SARS-CoV-2, metformin significantly reduced SARS-CoV-2 viral load, which may explain the clinical benefits in this trial. Metformin is pleiotropic with other actions that are relevant to COVID-19 pathophysiology. CLINICAL TRIALS REGISTRATION: NCT04510194.
Assuntos
Antivirais , Tratamento Farmacológico da COVID-19 , COVID-19 , Metformina , SARS-CoV-2 , Carga Viral , Humanos , Metformina/uso terapêutico , Metformina/farmacologia , Carga Viral/efeitos dos fármacos , Masculino , SARS-CoV-2/efeitos dos fármacos , Feminino , Pessoa de Meia-Idade , Método Duplo-Cego , Antivirais/uso terapêutico , Antivirais/farmacologia , Adulto , COVID-19/virologia , Ivermectina/uso terapêutico , Ivermectina/farmacologia , Fluvoxamina/uso terapêutico , Fluvoxamina/farmacologia , IdosoRESUMO
In this work, we propose a new methodology for obtaining three-dimensional (3D) carbon allotrope structures from 2D ones through topological mapping. The idea is to select a 3D target structure and "slice" it along different structural directions, creating a series of 2D structures. As a proof of concept, we chose the tubulane structure 12-hexa(3,3) as a target. Tubulanes are 3D carbon allotropes based on cross-linked carbon nanotubes. One of the obtained 2D "sliced" structures was mapped into the biphenylene carbon (BPC). We showed that compressing BPC in-plane, biaxially, followed by compression along the z direction using different strain rates could generate not only the target tubulane 12-hexa(3,3) structure but also at least two others: bcc-C6 and an unreported member of the tubulane family, which we called tubulane X. The methodology proposed here is entirely general; it can be used coupled with any quantum method. Considering that the 2D biphenylene carbon network, which is closely related to BPC, has been recently synthesized, the approach proposed here opens new perspectives to obtain new 3D carbon allotropes from 2D structures.
RESUMO
Global and regional atmospheric measurements and modeling can play key roles in discovering and quantifying unexpected nascent emissions of environmentally important substances. We focus here on three hydrochlorofluorocarbons (HCFCs) that are restricted by the Montreal Protocol because of their roles in stratospheric ozone depletion. Based on measurements of archived air samples and on in situ measurements at stations of the Advanced Global Atmospheric Gases Experiment (AGAGE) network, we report global abundances, trends, and regional enhancements for HCFC-132b ([Formula: see text]), which is newly discovered in the atmosphere, and updated results for HCFC-133a ([Formula: see text]) and HCFC-31 ([Formula: see text]ClF). No purposeful end-use is known for any of these compounds. We find that HCFC-132b appeared in the atmosphere 20 y ago and that its global emissions increased to 1.1 Ggâ y-1 by 2019. Regional top-down emission estimates for East Asia, based on high-frequency measurements for 2016-2019, account for â¼95% of the global HCFC-132b emissions and for â¼80% of the global HCFC-133a emissions of 2.3 Ggâ y-1 during this period. Global emissions of HCFC-31 for the same period are 0.71 Ggâ y-1 Small European emissions of HCFC-132b and HCFC-133a, found in southeastern France, ceased in early 2017 when a fluorocarbon production facility in that area closed. Although unreported emissive end-uses cannot be ruled out, all three compounds are most likely emitted as intermediate by-products in chemical production pathways. Identification of harmful emissions to the atmosphere at an early stage can guide the effective development of global and regional environmental policy.
RESUMO
γ-Graphyne is the most symmetric sp2/sp1 allotrope of carbon, which can be viewed as graphene uniformly expanded through the insertion of two-carbon acetylenic units between all the aromatic rings. To date, synthesis of bulk γ-graphyne has remained a challenge. We here report the synthesis of multilayer γ-graphyne through crystallization-assisted irreversible cross-coupling polymerization. A comprehensive characterization of this new carbon phase is described, including synchrotron powder X-ray diffraction, electron diffraction, lateral force microscopy, Raman spectroscopy, infrared spectroscopy, and cyclic voltammetry. Experiments indicate that γ-graphyne is a 0.48 eV band gap semiconductor, with a hexagonal a-axis spacing of 6.88 Å and an interlayer spacing of 3.48 Å, which is consistent with theoretical predictions. The observed crystal structure has an aperiodic sheet stacking. The material is thermally stable up to 240 °C but undergoes transformation at higher temperatures. While conventional 2D polymerization and reticular chemistry rely on error correction through reversibility, we demonstrate that a periodic covalent lattice can be synthesized under purely kinetic control. The reported methodology is scalable and inspires extension to other allotropes of the graphyne family.
RESUMO
ABSTRACCT: Efforts to obtain high-strength graphene sheets by near-room-temperature assembly have been frustrated by the misalignment of graphene layers, which degrades mechanical properties. While in-plane stretching can decrease this misalignment, it reappears when releasing the stretch. Here we use covalent and π-π inter-platelet bridging to permanently freeze stretch-induced alignment of graphene sheets, and thereby increase isotropic in-plane sheet strength to 1.55 GPa, in combination with a high Young's modulus, electrical conductivity and weight-normalized shielding efficiency. Moreover, the stretch-bridged graphene sheets are scalable and can be easily bonded together using a commercial resin without appreciably decreasing the performance, which establishes the potential for practical applications.
RESUMO
Nature's evolution over billions of years has led to the development of different kinds of twisted structures in a variety of biological species. Twisted fibers from nanoscale- to micrometer-scale diameter have been prepared by mimicking natural twisted structures. Mechanically inserting twist in a yarn is an efficient and important method, which generates internal stress, changes the macromolecular orientation, and increases compactness. Recently, twist insertion has been found to produce interesting fiber properties, including chemical, mechanical, electrical, and thermal properties. This Account summarizes recent progress in how twist insertion affects the chemical and physical properties of fibers and describes their applications in artificial spider silk, artificial muscles, refrigeration, and electricity generation.Twist and associated chirality widely arise in nature from molecules to nano- and microscale materials to macroscopic objects such as DNA, RNA, peptides, and chromosomes. Such twisted architectures play an important role in improving the mechanical properties and enabling biological functions. Inspired by the beauty and interesting properties of twisted structures, a wide range of artificial chiral materials with twisted or coiled structures have been prepared, from organic and inorganic nanorods, nanotubes, and nanobelts to macroscopic architectures and buildings.An efficient way to prepare twisted materials is by inserting twist in fibers or yarns, which is an ancient technique used to make yarns or ropes (Wang, R., et al. Science 2019, 366, 216-221. Mu, J., et al. Science 2019, 365, 150-155). During the twisting process, torque is generated in fibers or yarns, the structure of the polymer chains becomes helically oriented, and the fibers in a yarn become more compact. Therefore, the twisting of fibers and yarns can produce novel chemical, mechanical, electrical, and thermal properties (Dou, Y., et al. Nat. Commun. 2019, 10, 1-10. Kim, S. H., et al. Science 2017, 357, 773-778). This Account focuses on the novel properties generated by twist insertion. The mechanical stress and strain can be optimized in a yarn by twist insertion, and different types of fibers exhibit rather different mechanisms.In the first section, we will focus on recent progress in improving the mechanical properties of twisted fibers, including carbon nanotube yarns, single-filament fibers, and hydrogel fibers. Torque was generated by twist insertion in a fiber or a yarn, and the balance of internal torsional stress can be changed by causing a change in yarn volume. This will result in twist release and torsional and tensile actuations of the yarn, which will be described in the second section. Twisting a yarn generally makes it more compact, which will result in a mechanically induced change in capacitance, supercapacitance, and other useful electrochemical properties when a conducting yarn is in an electrolyte. Such processes were used to develop novel devices for twist-based electricity generation, called twistrons, which will be discussed in the third section. Twist insertion or release also changes the polymer chain orientation or crystal structure, resulting in changes in entropy. This is called the twistocaloric effect, which was used to develop a new cooling method, and will be discussed in the last section.
RESUMO
This Letter presents the results from the MiniBooNE experiment within a full "3+1" scenario where one sterile neutrino is introduced to the three-active-neutrino picture. In addition to electron-neutrino appearance at short baselines, this scenario also allows for disappearance of the muon-neutrino and electron-neutrino fluxes in the Booster Neutrino Beam, which is shared by the MicroBooNE experiment. We present the 3+1 fit to the MiniBooNE electron-(anti)neutrino and muon-(anti)neutrino data alone and in combination with MicroBooNE electron-neutrino data. The best-fit parameters of the combined fit with the exclusive charged-current quasielastic analysis (inclusive analysis) are Δm^{2}=0.209 eV^{2}(0.033 eV^{2}), |U_{e4}|^{2}=0.016(0.500), |U_{µ4}|^{2}=0.500(0.500), and sin^{2}(2θ_{µe})=0.0316(1.0). Comparing the no-oscillation scenario to the 3+1 model, the data prefer the 3+1 model with a Δχ^{2}/d.o.f.=24.7/3(17.3/3), a 4.3σ(3.4σ) preference assuming the asymptotic approximation given by Wilks's theorem.
RESUMO
We measured the cross section of coherent elastic neutrino-nucleus scattering (CEvNS) using a CsI[Na] scintillating crystal in a high flux of neutrinos produced at the Spallation Neutron Source at Oak Ridge National Laboratory. New data collected before detector decommissioning have more than doubled the dataset since the first observation of CEvNS, achieved with this detector. Systematic uncertainties have also been reduced with an updated quenching model, allowing for improved precision. With these analysis improvements, the COHERENT Collaboration determined the cross section to be (165_{-25}^{+30})×10^{-40} cm^{2}, consistent with the standard model, giving the most precise measurement of CEvNS yet. The timing structure of the neutrino beam has been exploited to compare the CEvNS cross section from scattering of different neutrino flavors. This result places leading constraints on neutrino nonstandard interactions while testing lepton flavor universality and measures the weak mixing angle as sin^{2}θ_{W}=0.220_{-0.026}^{+0.028} at Q^{2}≈(50 MeV)^{2}.
RESUMO
We report the first results of a search for leptophobic dark matter (DM) from the Coherent-CAPTAIN-Mills (CCM) liquid argon (LAr) detector. An engineering run with 120 photomultiplier tubes (PMTs) and 17.9×10^{20} protons on target (POT) was performed in fall 2019 to study the characteristics of the CCM detector. The operation of this 10-ton detector was strictly light based with a threshold of 50 keV and used coherent elastic scattering off argon nuclei to detect DM. Despite only 1.5 months of accumulated luminosity, contaminated LAr, and nonoptimized shielding, CCM's first engineering run has already achieved sensitivity to previously unexplored parameter space of light dark matter models with a baryonic vector portal. With an expected background of 115 005 events, we observe 115 005+16.5 events which is compatible with background expectations. For a benchmark mediator-to-DM mass ratio of m_{V_{B}}/m_{χ}=2.1, DM masses within the range 9 MeVâ²m_{χ}â²50 MeV are excluded at 90% C. L. in the leptophobic model after applying the Feldman-Cousins test statistic. CCM's upgraded run with 200 PMTs, filtered LAr, improved shielding, and 10 times more POT will be able to exclude the remaining thermal relic density parameter space of this model, as well as probe new parameter space of other leptophobic DM models.
RESUMO
The high-mobility group box-1 (HMGB1) protein is a transcription-regulating protein located in the nucleus. However, it serves as a damage-associated molecular pattern protein that activates immune cells and stimulates inflammatory cytokines to accentuate neuroinflammation after release from damaged cells. In contrast, Inter-alpha Inhibitor Proteins (IAIPs) are proteins with immunomodulatory effects including inhibition of pro-inflammatory cytokines. We have demonstrated that IAIPs exhibit neuroprotective properties in neonatal rats exposed to hypoxic-ischemic (HI) brain injury. In addition, previous studies have suggested that the light chain of IAIPs, bikunin, may exert its anti-inflammatory effects by inhibiting HMGB1 in a variety of different injury models in adult subjects. The objectives of the current study were to confirm whether HMGB1 is a target of IAIPs by investigating the potential binding characteristics of HMGB1 and IAIPs in vitro, and co-localization in vivo in cerebral cortices after exposure to HI injury. Solid-phase binding assays and surface plasmon resonance (SPR) were used to determine the physical binding characteristics between IAIPs and HMGB1. Cellular localizations of IAIPs-HMGB1 in neonatal rat cortex were visualized by double labeling with anti-IAIPs and anti-HMGB1 antibodies. Solid-phase binding and SPR demonstrated specific binding between IAIPs and HMGB1 in vitro. Cortical cytoplasmic and nuclear co-localization of IAIPs and HMGB1 were detected by immunofluorescent staining in control and rats immediately and 3 hours after HI. In conclusion, HMGB1 and IAIPs exhibit direct binding in vitro and co-localization in vivo in neonatal rats exposed to HI brain injury suggesting HMGB1 could be a target of IAIPs.
Assuntos
alfa-Globulinas/química , Córtex Cerebral/química , Proteína HMGB1/química , Hipóxia-Isquemia Encefálica/metabolismo , alfa-Globulinas/análise , Animais , Animais Recém-Nascidos , Feminino , Imunofluorescência , Proteína HMGB1/análise , Imuno-Histoquímica , Ratos , Ratos Wistar , Ressonância de Plasmônio de SuperfícieRESUMO
BACKGROUND AND AIM: Whether 5-aminosalicylic acid (ASA) can be stopped in patients with stable ulcerative colitis (UC) remains unclear. We aimed to examine whether 5-ASA can be safely withdrawn in UC patients who have been in corticosteroid-free clinical remission for ≥ 1 year. METHODS: This is a retrospective cohort study using territory-wide healthcare database in Hong Kong. Primary outcome was development of UC flare, defined as new corticosteroid use or UC-related hospitalizations within 5 years. UC patients on oral 5-ASA ≥ 2 g daily for ≥ 1 year with C-reactive protein (CRP) < 10 mg/dL and no 5-ASA dosage escalation, UC-related hospitalization or corticosteroid use in the past year were included. Patients on biological agents were excluded. Patients were classified as "stopping" if 5-ASA was withdrawn for ≥ 90 days within follow-up period. We performed multivariable Cox regression models adjusting for demographics, blood parameters and immunosuppressants used. Adjusted hazard ratio (aHR) with 95% confidence interval (CI) was reported comparing stopping and continuous-use groups. RESULTS: A total of 1408 patients were included with a median follow-up duration of 41.8 months (interquartile range [IQR]: 17.2-60.0 months). Stopping 5-ASA was not associated with an increased risk of UC flare (aHR 0.91; 95% CI 0.64-1.31; P = 0.620). A higher CRP levels at the time of stopping 5-ASA (aHR 1.15; 95% CI: 1.01-1.30; P = 0.037) were associated with increased risk of flare. CONCLUSION: Stopping 5-ASA in UC patients in corticosteroid-free remission for ≥ 1 year was not associated with increased risk of flare. Future prospective trials should evaluate the role of stopping 5-ASA in stable UC patients.
Assuntos
Colite Ulcerativa , Mesalamina , Corticosteroides/efeitos adversos , Anti-Inflamatórios não Esteroides , Colite Ulcerativa/induzido quimicamente , Colite Ulcerativa/tratamento farmacológico , Humanos , Indução de Remissão , Estudos RetrospectivosRESUMO
A vital and healthy dental pulp (DP) is required for teeth to remain functional throughout a lifespan . Appreciating its value for the tooth, the regeneration of the DP is a highly researched goal. While inflammation of the DP marks the beginning of an eventual necrosis, it is also the prerequisite for the regenerative events of neovascularisation, stem cells mobilisation and reparative dentine deposition. In the light of a pro-regenerative inflammatory process, the present review discusses the role of macrophage population shift from pro- to anti-inflammatory in reversible versus irreversible pulpitis, while also analysing the overlooked contribution of pulp innervation and locally derived neuropeptides to the process. Then, the currently practiced (pulp capping and revascularisation) and researched (cells transplantation and cell homing) approaches for DP regeneration are discussed. Focusing on the role of cell homing in modulating inflammation, some potential strategies are highlighted to harness the inflammatory process for DP regeneration, mainly by reversing inflammation through macrophage induction. Next, some potential clinical applications are discussed - especially with capping materials - that could boost macrophage polarisation and complement system activation. Finally, current challenges facing the regeneration of the DP are presented, while underlining the importance of promoting an anti-inflammatory environment conducive to a regenerative process.
Assuntos
Polpa Dentária , Pulpite , Humanos , Inflamação , RegeneraçãoRESUMO
We here show that infiltrated bridging agents can convert inexpensively fabricated graphene platelet sheets into high-performance materials, thereby avoiding the need for a polymer matrix. Two types of bridging agents were investigated for interconnecting graphene sheets, which attach to sheets by either π-π bonding or covalent bonding. When applied alone, the π-π bonding agent is most effective. However, successive application of the optimized ratio of π-π bonding and covalent bonding agents provides graphene sheets with the highest strength, toughness, fatigue resistance, electrical conductivity, electromagnetic interference shielding efficiency, and resistance to ultrasonic dissolution. Raman spectroscopy measurements of stress transfer to graphene platelets allow us to decipher the mechanisms of property improvement. In addition, the degree of orientation of graphene platelets increases with increasing effectiveness of the bonding agents, and the interlayer spacing increases. Compared with other materials that are strong in all directions within a sheet, the realized tensile strength (945 MPa) of the resin-free graphene platelet sheets was higher than for carbon nanotube or graphene platelet composites, and comparable to that of commercially available carbon fiber composites. The toughness of these composites, containing the combination of π-π bonding and covalent bonding, was much higher than for these other materials having high strengths for all in-plane directions, thereby opening the path to materials design of layered nanocomposites using multiple types of quantitatively engineered chemical bonds between nanoscale building blocks.
RESUMO
BACKGROUND: The global COVID-19 pandemic has led to an urgent need for scalable methods for clinical diagnostics and viral tracking. Next generation sequencing technologies have enabled large-scale genomic surveillance of SARS-CoV-2 as thousands of isolates are being sequenced around the world and deposited in public data repositories. A number of methods using both short- and long-read technologies are currently being applied for SARS-CoV-2 sequencing, including amplicon approaches, metagenomic methods, and sequence capture or enrichment methods. Given the small genome size, the ability to sequence SARS-CoV-2 at scale is limited by the cost and labor associated with making sequencing libraries. RESULTS: Here we describe a low-cost, streamlined, all amplicon-based method for sequencing SARS-CoV-2, which bypasses costly and time-consuming library preparation steps. We benchmark this tailed amplicon method against both the ARTIC amplicon protocol and sequence capture approaches and show that an optimized tailed amplicon approach achieves comparable amplicon balance, coverage metrics, and variant calls to the ARTIC v3 approach. CONCLUSIONS: The tailed amplicon method we describe represents a cost-effective and highly scalable method for SARS-CoV-2 sequencing.
Assuntos
Teste de Ácido Nucleico para COVID-19/métodos , COVID-19/virologia , Genoma Viral/genética , SARS-CoV-2/genética , Benchmarking , COVID-19/diagnóstico , COVID-19/epidemiologia , Teste de Ácido Nucleico para COVID-19/normas , Humanos , Epidemiologia Molecular , Mutação , RNA Viral/genética , SARS-CoV-2/isolamento & purificação , Análise de Sequência/métodos , Análise de Sequência/normasRESUMO
Inter-alpha inhibitor proteins (IAIPs) are naturally occurring immunomodulatory molecules found in most tissues. We have reported ontogenic changes in the expression of IAIPs in brain during development in sheep and abundant expression of IAIPs in fetal and neonatal rodent brain in a variety of cellular types and brain regions. Although a few studies identified bikunin, light chain of IAIPs, in adult human brain, the presence of the complete endogenous IAIP protein complex has not been reported in human brain. In this study, we examined the immunohistochemical expression of endogenous IAIPs in human cerebral cortex from early in development through the neonatal period and in adults using well-preserved postmortem brains. We examined total, nuclear, and cytoplasmic staining of endogenous IAIPs and their expression in neurofilament light polypeptide-positive neurons and glial fibrillary acidic protein (GFAP)-positive astrocytes. IAIPs were ubiquitously detected for the first time in cerebral cortical cells at 24-26, 27-28, 29-36, and 37-40 weeks of gestation and in adults. Quantitative analyses revealed that IAIPs were predominately localized in the nucleus in all age groups, but cytoplasmic IAIP expression was more abundant in adult than in the younger ages. Immunoreactivity of IAIPs was expressed in neurons and astrocytes in all age groups. In addition, IAIP co-localization with GFAP-positive astrocytes was more abundant in adults than in the developing brain. We conclude that IAIPs exhibit ubiquitous expression, and co-localize with neurons and astrocytes in the developing and adult human brain suggesting a potential role for IAIPs in development and endogenous neuroprotection.
Assuntos
alfa-Globulinas/metabolismo , Encéfalo/metabolismo , Neurônios/metabolismo , Adulto , Idoso , Idoso de 80 Anos ou mais , Envelhecimento/metabolismo , Astrócitos/metabolismo , Feminino , Feto/metabolismo , Idade Gestacional , Humanos , Lactente , Masculino , Pessoa de Meia-IdadeRESUMO
Motivation: Colocalization of structures in biomedical images can lead to insights into biological behaviors. One class of colocalization problems is examining an annular structure (disk-shaped such as a cell, vesicle or molecule) interacting with a network structure (vascular, neuronal, cytoskeletal, organellar). Examining colocalization events across conditions is often complicated by changes in density of both structure types, confounding traditional statistical approaches since colocalization cannot be normalized to the density of both structure types simultaneously. We have developed a technique to measure colocalization independent of structure density and applied it to characterizing intercellular colocation with blood vessel networks. This technique could be used to analyze colocalization of any annular structure with an arbitrarily shaped network structure. Results: We present the circular colocalization affinity with network structures test (CIRCOAST), a novel statistical hypothesis test to probe for enriched network colocalization in 2D z-projected multichannel images by using agent-based Monte Carlo modeling and image processing to generate the pseudo-null distribution of random cell placement unique to each image. This hypothesis test was validated by confirming that adipose-derived stem cells (ASCs) exhibit enriched colocalization with endothelial cells forming arborized networks in culture and then applied to show that locally delivered ASCs have enriched colocalization with murine retinal microvasculature in a model of diabetic retinopathy. We demonstrate that the CIRCOAST test provides superior power and type I error rates in characterizing intercellular colocalization compared to generic approaches that are confounded by changes in cell or vessel density. Availability and implementation: CIRCOAST source code available at: https://github.com/uva-peirce-cottler-lab/ARCAS. Supplementary information: Supplementary data are available at Bioinformatics online.
Assuntos
Células Endoteliais/citologia , Software , Células-Tronco/citologia , Tecido Adiposo/citologia , Animais , Células Cultivadas , Retinopatia Diabética , Processamento de Imagem Assistida por Computador , Camundongos , Método de Monte Carlo , NeurôniosRESUMO
We report a new dry-state technique for non-contact patterning of nanostructured conducting materials, and demonstrate its use for carbon nanotube forests and freestanding sheets of carbon nanotubes, graphene, graphene sponge, and MXene. This method uses self-generated electron-emission pulses (â¼20 ns) in air. On a substrate-tip separation scale of 10 to 20 nm, the few molecules of gas at atmospheric pressure enables electron-emission-based interaction between a sharp tungsten tip and elements of nanostructured materials. Using the advantages of field enhancement at sharp ends of nanostructured materials, the discharge voltage is reduced to 25-30 V, depending upon the materials density. This method causes largely non-oxidative sequential decomposition of nanostructure elements neighboring the tungsten tip. The main decomposition mechanism is thermal dissociation facilitated by Joule heating and electrostatic removal of debris. The non-contact-based patterning of nanomaterials can be as fast as 10 cm s-1. The resulting precisely patterned structures (<200 nm) are largely free of foreign contaminants, thermal impact and sub-surface structural changes.
RESUMO
Lightweight materials with high ballistic impact resistance and load-bearing capabilities are regarded as a holy grail in materials design. Nature builds these complementary properties into materials using soft organic materials with optimized, complex geometries. Here, the compressive deformation and ballistic impact properties of three different 3D printed polymer structures, named tubulanes, are reported, which are the architectural analogues of cross-linked carbon nanotubes. The results show that macroscopic tubulanes are remarkable high load-bearing, hypervelocity impact-resistant lightweight structures. They exhibit a lamellar deformation mechanism, arising from the tubulane ordered pore structure, manifested across multiple length scales from nano to macro dimensions. This approach of using complex geometries inspired by atomic and nanoscale models to generate macroscale printed structures allows innovative morphological engineering of materials with tunable mechanical responses.
RESUMO
Lightweight artificial muscle fibers that can match the large tensile stroke of natural muscles have been elusive. In particular, low stroke, limited cycle life, and inefficient energy conversion have combined with high cost and hysteretic performance to restrict practical use. In recent years, a new class of artificial muscles, based on highly twisted fibers, has emerged that can deliver more than 2,000 J/kg of specific work during muscle contraction, compared with just 40 J/kg for natural muscle. Thermally actuated muscles made from ordinary polymer fibers can deliver long-life, hysteresis-free tensile strokes of more than 30% and torsional actuation capable of spinning a paddle at speeds of more than 100,000 rpm. In this perspective, we explore the mechanisms and potential applications of present twisted fiber muscles and the future opportunities and challenges for developing twisted muscles having improved cycle rates, efficiencies, and functionality. We also demonstrate artificial muscle sewing threads and textiles and coiled structures that exhibit nearly unlimited actuation strokes. In addition to robotics and prosthetics, future applications include smart textiles that change breathability in response to temperature and moisture and window shutters that automatically open and close to conserve energy.