RESUMO
Double-cavity Q[n]s are relatively new members of the Q[n] family and have garnered significant interest due to their distinctive structures and novel properties. While they incorporate n glycoluril units, akin to their single-cavity counterparts, their geometry can best be described as resembling a figure-of-eight or a handcuff, distinguishing them from single-cavity Q[n]s. Despite retaining the core molecular recognition traits of single-cavity Q[n]s, these double-cavity variants introduce fascinating new attributes rooted in their distinct configurations. This overview delves into the synthesis, structural attributes, properties, and intriguing applications of double-cavity Q[n]s. Some of the applications explored include their role in supramolecular polymers, molecular machinery, supra-amphiphiles, sensors, artificial light-harvesting systems, and adsorptive separation materials. Upon concluding this review, we discuss potential challenges and avenues for future development and offer valuable insights for other scholars working in this area with the aim of stimulating further exploration and interest.
RESUMO
The high-performance hole transporting material (HTM) is one of the most important components for the perovskite solar cells (PSCs) in promoting power conversion efficiency (PCE). However, the low conductivity of HTMs and their additional requirements for doping and post-oxidation greatly limits the device performance. In this work, three novel pyrene-based derivatives containing methoxy-substituted triphenylamines units (PyTPA, PyTPA-OH and PyTPA-2OH) are designed and synthesized, where different numbers of hydroxyl groups are connected at the 2- or 2,7-positions of the pyrene core. These hydroxyl groups at the 2- or 2,7-positions of pyrene play a significantly role to enhance the intermolecular interactions that are able to generate in situ radicals with the assistance of visible light irradiation, resulting in enhanced hole transferring ability, as well as an enhanced conductivity and suppressed recombination. These pyrene-core based HTMs exhibit excellent performance in PSCs, which possess a higher PCE than those control devices using the traditional spiro-OMeTAD as the HTM. The best performance can be found in the devices with PyTPA-2OH. It has an average PCE of 23.44% (PCEmax = 23.50%), which is the highest PCE among the reported PSCs with the pyrene-core based HTMs up to date. This research offers a novel avenue to design a dopant-free HTM by the combination of the pyrene core, methoxy triphenylamines, and hydroxy groups.
RESUMO
Lipophilic biphenylthiophene- and phenanthrothiophene-triazine compounds, BPTTn and CPTTn, respectively, were prepared by a tandem procedure involving successive Suzuki-Miyaura coupling and Scholl cyclodehydrogenation reactions. These compounds display photoluminescence in solution and in thin film state, solvatochromism with increasing solvent's polarity, as well as acidochromism and metal ion recognition stimuli-responsive fluorescence. Protonation of BPTT10 and CPTT10 by trifluoroacetic acid results in fluorescence quenching, which is reversibly restored once treated with triethylamine (ON-OFF switch). DFT computational studies show that intramolecular charge transfer (ICT) phenomena occurs for both molecules, and reveal that protonation enhances the electron-withdrawing ability of the triazine core and reduces the band gap. This acidochromic behavior was applied to a prototype fluorescent anti-counterfeiting device. They also specifically recognize Fe3+ through coordination, and the recognition mechanism is closely related to the photoinduced electron transfer between Fe3+ and BPTT10/CPTT10. CPTTn self-assemble into columnar rectangular (Colrec) mesophase, which can be modulated by oleic acid via the formation of a hydrogen-bonded supramolecular liquid crystal hexagonal Colhex mesophase. Finally, CPTTn also form organic gels in alkanes at low critical gel concentration (3.0â mg/mL). Therefore, these star-shaped triazine molecules possess many interesting features and thus hold great promises for information processing, liquid crystal semiconductors and organogelators.
RESUMO
Bacterial infections typically invade the living tissue of wounds, thereby aggravating the inflammatory response, delaying wound healing, or causing further complications. In this paper, the antibacterial hydrogel (PNVBA) with antifreezing and antidrying properties was prepared by a two-step method using N-isopropylacrylamide (NIPAM), 1-butyl-3-vinylimidazolium bromide (VBIMBr), and 3-acrylamidophenylboronic acid (AAPBA). PNVBA hydrogels exhibited a high adsorption capacity of 280 mg·g-1 for bovine serum albumin (BSA) and can adhere to the surface of different materials through ion-dipole or hydrogen-bonding interactions. Meanwhile, the PNVBA hydrogels exhibited high viscoelasticity and good adhesion after freezing at -20 °C or heating at 70 °C for 24 h with a sterilizing rate of up to 98% against multidrug-resistant (MDR) Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA). Moreover, a survival rate of up to 90% after incubation with L929 cells over 24 h was observed. Therefore, this inherent antibacterial hydrogel can be used as an excellent alternative material for wound dressings.
Assuntos
Hidrogéis , Staphylococcus aureus Resistente à Meticilina , Hidrogéis/farmacologia , Bandagens , Antibacterianos/farmacologia , Escherichia coli , Polímeros/farmacologiaRESUMO
Pyrene-based derivatives have been widely deployed in organic luminescent materials because of their bright fluorescence, high charge carrier mobility, and facile modification. Nevertheless, the fluorescence output of conventional pyrenes is prone to quenching upon aggregation due to extensive intermolecular π-π stacking interactions. To address this issue, a set of new Y-shaped pyrene-containing luminogens are synthesized from a new bromopyrene chemical precursor, 2-hydroxyl-7-tert-butyl-1,3-bromopyrene, where the bromo and hydroxyl groups at the pyrene core can be readily modified to obtain the target products and provide great flexibility in tuning the photophysical performances. When the hydroxy group at the 2-position of pyrene was replaced by a benzyl group, the steric hindrance of the benzyl group not only efficiently inhibits the detrimental intermolecular π-π stacking interactions but also rigidifies the molecular conformation, resulting in a narrow-band blue emission. Moreover, the TPE-containing compounds 2c and 3c possessed characteristic aggregation-induced emission (AIE) properties with fluorescence quantum yields of up to 66% and 38% in the solid state, respectively. Thus, this article has methodically investigated the factors influencing the optical behavior, such as intermolecular interactions, and the steric effects of the substituent group, thereby opening up the potential to develop narrow-band pyrene-based blue emitters for OLED device applications.
RESUMO
High-efficiency narrow-band luminescent materials have attracted intense interest, resulting in their great colorimetric purity. This has led to a variety of high-tech applications in high-definition displays, spectral analysis, and biomedicine. In this study, a rigid pyrene core was employed as the molecular backbone, and four narrow-band pyrene-based blue emitters were synthesized using various synthetic methods (such as Lewis-acid catalyzed cyclization domino reactions, Pd-catalyzed coupling reactions like Suzuki-Miyaura and Sonogashira). Due to the steric effect of the hydroxy group at the 2-position, the target compounds exhibit deep blue emission (<429 nm, CIEy < 0.08) with full width at half-maximum (FWHM) less than 33 nm both in solution and when solidified. The experimental and theoretical results indicated that the substituents at the 1- and 3-positions afford a large dihedral angle with the pyrene core, and the molecular motion is almost fixed by multiple intra- and intermolecular hydrogen bonding interactions in the crystallized state, leading to a suppression of the vibrational relaxation of the molecular structure. Moreover, we observed that the suppression of the vibrational relaxation in the molecular structures and the construction of rigid conjugated structures can help develop narrow-band organic light-emitting materials.
RESUMO
In this study, we synthesized a coumarin-hemicyanine-based deep red fluorescent dye that exhibits an intramolecular charge transfer (ICT). The probe had a large Stokes shift of 287 nm and a large molar absorption coefficient (ε = 7.5 × 105 L·mol-1·cm-1) and is best described as a deep red luminescent fluorescent probe with λem = 667 nm. The color of probe W changed significantly when it encountered cyanide ions (CN-). The absorption peak (585 nm) decreased gradually, and the absorption peak (428 nm) increased gradually, so that cyanide (CN-) could be identified by the naked eye. Moreover, an obvious fluorescence change was evident before and after the reaction under irradiation using 365 nm UV light. The maximum emission peak (667 nm) decreased gradually, whilst the emission peak (495 nm) increased gradually, which allowed for the proportional fluorescence detection of cyanide (CN-). Using fluorescence spectrometry, the fluorescent probe W could linearly detect CN- over the concentration range of 1-9 µM (R2 = 9913, RSD = 0.534) with a detection limit of 0.24 µM. Using UV-Vis spectrophotometry, the linear detection range for CN- was found to be 1-27 µM (R2 = 0.99583, RSD = 0.675) with a detection limit of 0.13 µM. The sensing mechanism was confirmed by 1H NMR spectroscopic titrations, 13C NMR spectroscopy, X-ray crystallographic analysis and HRMS. The recognition and detection of CN- by probe W was characterized by a rapid response, high selectivity, and high sensitivity. Therefore, this probe provides a convenient, effective and economical method for synthesizing and detecting cyanide efficiently and sensitively.
Assuntos
Cianetos , Corantes Fluorescentes , Cianetos/química , Corantes Fluorescentes/química , Carbocianinas , Cumarínicos/química , Espectrometria de Fluorescência/métodosRESUMO
pH plays a crucial part in numerous chemical and physiological processes. In this work, a new perylene diimide derivative that acts as a pH-sensitive dye with Bay Area Carboxylic Acid functionality. The derivative utilizes the outstanding thermal, chemical and photochemical stability found in PDI materials and has remarkable UV-visible absorption and fluorescence emission qualities. Based on these properties, a fluorescent probe (PCA) was synthesised using a perylene tetracarbodiimide (PDI) backbone for the recognition of alkaline pH. In alkaline environments where the pH values are between 10 and 14, the fluorescence intensity significantly decreases, and a blue shift occurs, which is a standard feature of alkaline pH probes. The probe demonstrates exceptional sensing ability within the pH range of 10.00-14.00, with notable stability and reversibility. Encapsulation of the probe in a thin polymer film material enhances the pH sensing capability of the system. New sensor has been developed to detect basic amino acids by utilizing the probes' pH response characteristics. this sensor has also been applied to detect the concentration of arginine.
RESUMO
Herein, a facile strategy was established to build mechanoresponsive luminogens with high sensitivity to substituents and positional effects. Even in slightly different structures, distinct optical phenomena, including fluorescence efficiency and mechano-responsive properties, were clearly present. Outstanding mechanical-induced emission enhancement (5-100 times) properties and reversibility makes for promising applications in pressure sensors and OLEDs.
RESUMO
Reaction of [VO(OR)3] (R = Et, nPr) with 2,2'-diphenylglycine afforded the alkoxide-bridged dimers {[VO(OR)(µ-OR)][Ph2C(NH2)(CO2)]}2, whereas use of benzilic acid, in the presence of alkali metals, afforded 16-membered metallocycles {V8(O)4M(OR)8[Ph2C(OH)(CO2)]12} (M = <1 Na, K). For the ring systems, magnetic susceptibility data is consistent with mixed-valence vanadium with an average oxidation state of 3.5. The dimer and ring systems are capable of the ring opening polymerisation (ROP) of ε-caprolactone under N2, air, or as melts affording mostly low to medium molecular weight cyclic and linear products.
RESUMO
A simple fluorescent "on-off" system that can be utilized for the selective identification and determination of paraquat (PQ) is presented herein. 1H NMR spectroscopic data indicated that in aqueous solution the alkaloid palmatine can be partially encapsulated within the cucurbit[7]uril (Q[7]) cavity, whereby a stable 1 : 1 host-guest inclusion complex is formed. Other characterization techniques including mass spectrometry, UV-Vis and fluorescence spectroscopy also provided further evidence, and the host-guest inclusion complex was found to exhibit reasonable fluorescence intensity. It is noteworthy that the addition of PQ resulted in quenching the fluorescence of the host-guest inclusion complex, whereas the presence of 12 other pesticides did not significantly affect the fluorescence intensity. Given the linear relationship between the intensity of the fluorescence and the PQ concentration, the PQ concentration in aqueous solution was easily detected. Thus, a new method for identifying and determining the fluorescence quenching of PQ has been developed in this work.
RESUMO
Multidrug-resistant (MDR) bacteria pose serious threats to public health due to the lack of effective and biocompatible drugs to kill MDR bacteria. Photodynamic antibacterial therapy has been widely studied due to its low induction of resistance. However, photosensitizers that can efficiently generate reactive oxygen species (ROS) through both type I and type II mechanisms and that have the capability of multiple modes of action are rarely reported. Addressing this issue, we developed a near-infrared-emitting triphenylamine indole iodoethane (TTII) and its silver(I) self-assembled (TTIIS) aggregation-induced emission (AIE) photosensitizer for multimode bacterial infection therapy. TTII can efficiently produce both Type I ROS â¢OH and Type II ROS 1O2. Interestingly, the Ag(I)-π interaction contributed in TTIIS efficiency promotion of the generation of 1O2. Moreover, by releasing Ag+, TTIIS enabled photodynamic-Ag(I) dual-mode sterilization. As a result, TTIIS achieved an effective enhancement of antibacterial activity, with a 1-2-fold boost against multidrug-resistant Escherichia coli (MDR E. coli). Both TTII and TTIIS at a concentration as low as 0.55 µg mL-1 can kill more than 98% of methicillin resistant Staphylococcus aureus (MRSA) on MRSA-infected full-thickness defect wounds of a mouse, and both TTII and TTIIS were effective in eliminating the bacteria and promoting wound healing.
Assuntos
Antibacterianos , Farmacorresistência Bacteriana Múltipla , Escherichia coli , Fármacos Fotossensibilizantes , Espécies Reativas de Oxigênio , Prata , Fármacos Fotossensibilizantes/química , Fármacos Fotossensibilizantes/farmacologia , Prata/química , Prata/farmacologia , Animais , Farmacorresistência Bacteriana Múltipla/efeitos dos fármacos , Camundongos , Antibacterianos/farmacologia , Antibacterianos/química , Escherichia coli/efeitos dos fármacos , Espécies Reativas de Oxigênio/metabolismo , Fotoquimioterapia , Testes de Sensibilidade Microbiana , Staphylococcus aureus Resistente à Meticilina/efeitos dos fármacosRESUMO
Interaction of the lanthanide nitrates M(NO3)3 (M = Gd, Eu) with methylcucurbit[5]uril (Me10Q[5]) in the presence of transition metal chlorides (ZnCl2 and FeCl3) in acidic media resulted in the isolation of the complexes [Me10Q[5]Gd(H2O)2Cl Gd(H2O)6](ZnCl4)2âClâ8.9H2O (1) and [Me10Q[5]Eu(H2O)3Cl(H3O)](FeCl4)3 (2). The molecular structures of 1 and 2 have been determined by single crystal X-ray crystallography, and reveal discrete complexes which are involved in dense stacking with adjacent Me10Q[5]s linked via H-bonding and/or metal anions resulting in a supramolecular assembly.