Etching of Ag nanoparticles triggered bidirectional regulation for electrochemiluminescence ratiometric immunoassay.

A highly efficient ratiometric electrochemiluminescence (ECL) immunoassay was explored by bidirectionally regulating the ECL intensity of two luminophors. The immunoassay was conducted in a split-type mode consisting of an ECL detection procedure and a sandwich immunoreaction. The ECL detection was executed using a dual-disk glassy carbon electrode modified with two potential-resolved luminophors (g-C3N4-Ag and Ru-MOF-Ag nanocomposites), and the sandwich immunoreaction using glucose oxidase (GOx)-modified SiO2 nanospheres as labels was carried out in a 96-well plate. The Ag nanoparticles (NPs) acted as bifunctional units both for triggering the resonance energy transfer (RET) with g-C3N4 and for accelerating the electron transfer rate of the Ru-MOF-Ag ECL reaction. When the H2O2 catalyzed by GOx in the 96-well plate was transferred to the dual-disk glass carbon electrode, the doped Ag NPs in the two luminophors could be etched, thus destroying the RET between C3N4 and the accelerated reaction to Ru-MOF, resulting in an opposite trend in the ECL signal outputted from the dual disks. Using the ratio of the two signals for quantification, the constructed immunosensor for a model target, i.e. myoglobin, exhibited a low detection limit of 4.7 × 10-14 g/mL. The ingenious combination of ECL ratiometry, bifunctional Ag NPs, and a split-type strategy effectively reduces environmental and human errors, offering a more precise and sensitive analysis for complex samples.

H2O2-activated independently bidirectional regulation for a sensitive and accurate electrochemiluminescence ratiometric analysis.

Potential-resolved electrochemiluminescence (ECL) ratiometric analysis has become a research hotspot in bioassays by virtue of its good accuracy, versatility and specificity. Current ECL ratiometry mainly focuses on the competition for the co-reactant or quantitative analysis using a variable signal and a changeless signal; the disorganized change or small difference between the two signals may affect the accuracy and sensitivity of detection. In this study, we have developed a novel ECL ratiometric sensor based on the bidirectional regulation of two independent co-reaction systems by H2O2. H2O2 as a bidirectional moderator permits the ECL signals of the cathode and anode to independently change in opposite trends, which greatly enhances the organization and difference between the two signals. The ratio of the two signals is used to realize the quantitative analysis of myoglobin (MyO) with a good linear relationship between log(ECLcathode/ECLanode) and log CMyO in the range of 1.0 × 10-13 to 1.0 × 10-7 g mL-1. The detection limit is 4.0 × 10-14 g mL-1. Furthermore, it showed excellent performance in the determination of MyO in human serum samples. The proposed biosensor provides some developments for the sensitive and accurate detection of disease markers.

Dual-wavelength electrochemiluminescence ratiometry for hydrogen sulfide detection based on Cd2+-doped g-C3N4 nanosheets.

Herein, a novel and facile dual-wavelength ratiometric electrochemiluminescence-resonance energy transfer (ECL-RET) sensor for hydrogen sulfide (H2S) detection was constructed based on the interaction between S2- and Cd2+-doped g-C3N4 nanosheets (NSs). Cd2+-doped g-C3N4 NSs exhibited a strong ECL emission at 435 nm. In the presence of H2S, CdS was formed in situ on g-C3N4 NSs by the adsorption of S2- and Cd2+, generating another ECL emission at 515 nm. Furthermore, the overlapping of the absorption spectrum of the formed CdS and the ECL emission spectrum of g-C3N4 NSs led to a feasible RET, thus quenching the ECL intensity from g-C3N4 at 435 nm. Through an ECL decrease at 435 nm and an increase at 515 nm, a dual-wavelength ratiometric ECL-RET system for H2S was designed. The sensor exhibited a lower detection limit of 0.02 µM with a wide linear range of 0.05-100.0 µM. In addition, the applicability of the method was validated by plasma sample analysis with a linear range of 80.0-106.0%. We believe that such a proposal would provide new insight into advanced dual-wavelength ECL ratiometric assays.

Ru(NH3)63+/Ru(NH3)62+-Mediated Redox Cycling: Toward Enhanced Triple Signal Amplification for Photoelectrochemical Immunoassay.

Herein we report an effective Ru(NH3)63+/Ru(NH3)62+-mediated photoelectrochemical-chemical-chemical (PECCC) redox cycling amplification (RCA) strategy toward enhanced triple signal amplification for advanced split-type PEC immunoassay application. Specifically, alkaline phosphatase (ALP) label was confined via a sandwich immunorecognition to convert 4-aminophenyl phosphate to the signal reporter 4-aminophenol (AP), which was then directed to interact with Ru(NH3)62+ as a redox mediator and tris (2-carboxyethyl) phosphine (TCEP) as reducing agent in the detection buffer. Upon illumination, the system was then operated upon the oxidation of Ru(NH3)62+ by the photogenerated holes on the Bi2S3/BiVO4 photoelectrode, starting the chain reaction in which the Ru(NH3)62+ was regenerated by Ru(NH3)63+-enabled oxidization of AP to p-quinoneimine, which was simultaneously recovered by TCEP. Exemplified by interleukin-6 (IL-6) as the analyte, the Ru(NH3)63+/Ru(NH3)62+-mediated, AP-involved PECCC RCA coupled with ALP enzymatic amplification could achieve triple signal amplification toward the ultrasensitive PEC IL-6 immunoassay. This protocol can be extended as a general basis for other numerous targets of interest. Besides, we believe this work could offer a new perspective for the further exploration of advanced RCA-based PEC bioanalysis.

Reduced graphene oxide-gold nanoparticles-catalase-based dual signal amplification strategy in a spatial-resolved ratiometric electrochemiluminescence immunoassay.

A novel spatial-resolved electrochemiluminescent (ECL) ratiometry for cardiac troponin I (cTnI) analysis was developed using resonance energy transfer (RET) and a coreactant consumption strategy for signal amplification. Specifically, the spatial-resolved dual-disk glassy carbon electrodes were modified with CdS nanowires (CdS NWs) and luminol-gold nanoparticles (L-Au NPs) as potential-resolved ECL emitters, respectively. After stepwise immobilization of anti-cTnI and bovine serum albumin on the dual-disk electrodes, the CdS NWs-based electrode, with varied concentrations of cTnI, was used to provide a working signal, whereas the L-Au NPs-based electrode, with a fixed amount of cTnI, was employed to provide the reference signal. To efficiently amplify the working signal on the CdS NWs-based electrode, an anti-cTnI-reduced graphene oxide-gold nanoparticles-catalase probe (anti-cTnI-rGO-Au NPs-CAT) was loaded onto the electrode to form a sandwich immunocomplex. The RET from CdS NWs to Au NPs and the coreactant (i.e. H2O2) consumption by the CAT generate a significant ECL decrease on the CdS NWs-based electrode in the presence of cTnI. This novel and sensitive ratiometric detection mode for cTnI was achieved using the ratio values of the working signal of the CdS NWs-based electrode and the reference signal of the L-Au NPs-based electrode. The integration of RET and coreactant consumption strategy in the designed spatial-resolved ratiometric platform endows the immunosensor with a wide linear range of 5.0 × 10-13 - 1.0 × 10-7 g mL-1 and a low detection limit of 0.10 pg mL-1 for cTnI. Furthermore, the method exhibits high accuracy and sensitivity for cTnI determination in human serum samples.

Photoelectrochemical-Chemical-Chemical Redox Cycling for Advanced Signal Amplification: Proof-of-Concept Toward Ultrasensitive Photoelectrochemical Bioanalysis.

Signal amplification is essential for ultrasensitive photoelectrochemical (PEC) bioanalysis. Exploration of the facile and efficient route for multiple signal amplification is highly appealing. Herein, we present the concept of photoelectrochemical-chemical-chemical (PECCC) redox cycling as an advanced signal amplification route and a proof-of-concept toward ultrasensitive PEC bioanalysis. The system operated upon the bridging between the enzymatic generation of signaling species ascorbic acid (AA) from a sandwich immunoassay and the PECCC redox cycling among the ferrocenecarboxylic acid as redox mediator, the AA, and the tris(2-carboxyethyl)phosphine as reducing agent at the Bi2S3/Bi2WO6 photoelectrode. Exemplified by myoglobin (Myo) as target, the proposed system achieved efficient regeneration of AA and thus signal amplification toward the ultrasensitive split-type PEC immunoassay. This work first exploited the PECCC redox cycling, and we believe it will attract more interest in the research of PEC bioassays on the basis of advanced redox cycling.

Immuno-Electrochemiluminescent Imaging of a Single Cell Based on Functional Nanoprobes of Heterogeneous Ru(bpy)32+@SiO2/Au Nanoparticles.

It is valuable to develop a sensing platform for not only detecting a tumor marker in body fluids but also measuring its expression at single cells. In the present study, a simple closed bipolar electrodes-based electrochemiluminescence (BPEs-ECL) imaging strategy was developed for visual immunoassay of prostate specific antigen (PSA) at single cells using functional nanoprobes of heterogeneous Ru(bpy)32+@SiO2/Au nanoparticles. Multiple-assisted ECL signal amplification strategy was introduced into the detection system on the basis of the synergetic amplifying effect of the anodic and cathodic amplification. On the basis of the synergetic amplifying effect, the detection limits of PSA by using photomultiplier tube and charge-coupled device (CCD) imaging are 3.0 and 31 pg/mL, respectively. The obtained immunosensor was employed to evaluate PSA levels in serum samples with a satisfying result. Moreover, the obtained functional nanoprobes were used to visually profile the PSA expression on the surface of single LNCaP cells (a kind of prostate cancer cells) based on a bare BPE. The results show that the functional nanoprobes-based ECL imaging immunoassay provides a promising visual platform for detecting tumor markers (proteins and cancer cells) and thus shows a high potential in cancer diagnosis.

Cathodic electrochemiluminescence behaviour of MoS2 quantum dots and its biosensing of microRNA-21.

The cathodic electrochemiluminescence (ECL) behaviour of nontoxic MoS2 quantum dots (QDs) was studied for the first time using potassium peroxydisulfate as the co-reactant. Ag-PAMAM NCs, serving as difunctional tags for quenching and enhancing ECL of MoS2-reduced graphene oxide composites, were introduced into the ECL detection system for signal amplification. By modulating the interparticle distance between MoS2 QDs and Ag-PAMAM NCs, the ECL quenching from resonance energy transfer and the ECL enhancement from surface plasma resonance were realized. Coupling the good ECL performance of MoS2 QDs with the excellent ECL quenching and enhancement effects of Ag-PAMAM NCs, a novel MoS2 QDs-based ECL biosensing platform for sensitive detection of microRNA-21 was achieved with a detection limit of 0.20 fmol L-1 (S/N = 3). This method was successfully applied to the determination of microRNA-21 in human serum samples with recoveries of 90.0-110.0%, suggesting great potential for its applications in biological and chemical analysis.

Aptamer-based detection and quantitative analysis of human immunoglobulin E in capillary electrophoresis with chemiluminescence detection.

A novel aptamer-based CE with chemiluminescence (CL) assay was developed for highly sensitive detection of human immunoglobulin E (IgE). The IgE aptamer was conjugated with gold nanoparticles (AuNPs) to form AuNPs-aptamer that could specifically recognize the IgE to produce an AuNPs-aptamer-IgE complex. The mixture of the AuNPs-aptamer-IgE complex and the unbounded AuNPs-aptamer could be effectively separated by CE and sensitively detected with luminol-H2 O2 CL system. By taking the advantage of the excellent catalytic behavior of AuNPs on luminol-H2 O2 CL system, the ultrasensitive detection of IgE was achieved. The detection limit of IgE is 7.6 fM (S/N = 3) with a linear range from 0.025 to 250 pM. Successful detection of IgE in human serum samples was demonstrated and the recoveries of 94.9-103.2% were obtained. The excellent assay features of the developed approach are its specificity, sensitivity, adaptability, and very small sample consumption. Our design provides a methodology model for determination of rare proteins in biological samples.

Dual-signal amplification strategy for ultrasensitive chemiluminescence detection of PDGF-BB in capillary electrophoresis.

Many efforts have been made toward the achievement of high sensitivity in capillary electrophoresis coupled with chemiluminescence detection (CE-CL). This work describes a novel dual-signal amplification strategy for highly specific and ultrasensitive CL detection of human platelet-derived growth factor-BB (PDGF-BB) using both aptamer and horseradish peroxidase (HRP) modified gold nanoparticles (HRP-AuNPs-aptamer) as nanoprobes in CE. Both AuNPs and HRP in the nanoprobes could amplify the CL signals in the luminol-H2 O2 CL system, owing to the excellent catalytic behavior of AuNPs and HRP in the CL system. Meanwhile, the high affinity of aptamer modified on the AuNPs allows detection with high specificity. As proof-of-concept, the proposed method was employed to quantify the concentration of PDGF-BB from 0.50 to 250 fm with a detection limit of 0.21 fm. The applicability of the assay was further demonstrated in the analysis of PDGF-BB in human serum samples with acceptable accuracy and reliability. The result of this study exhibits distinct advantages, such as high sensitivity, good specificity, simplicity, and very small sample consumption. The good performances of the proposed strategy provide a powerful avenue for ultrasensitive detection of rare proteins in biological sample, showing great promise in biochemical analysis.

Highly sensitive capillary electrophoretic immunoassay of rheumatoid factor in human serum with gold nanoparticles enhanced chemiluminescence detection.

A new CE-based immunoassay method for the determination of rheumatoid factor was developed using chemiluminescent reaction of luminol and hydrogen peroxide catalyzed by gold nanoparticles (AuNPs). In this method, AuNPs were synthesized and conjugated with anti-RF (antibody, Ab) to form tagged Ab (AuNPs-Ab, Ab*), which subsequently linked to limited amount of RF (antigen, Ag) to produce Ab*-Ag complex by a noncompetitive immunoreaction. AuNPs were used to label antibody and amplify chemiluminescent signal. Under the optimized conditions, the mixture of free Ab* and Ab*-Ag complex was well separated and detected. This method yields a wide linear range of 0.01-20 µg/mL with a correlation coefficient of 0.997, and the detection limit of RF reaches 5.95 ng/mL (ca. 6.0 pmol/L, S/N = 3). The proposed method was successfully applied for the quantification of RF in human sera from patients with rheumatoid arthritis. This highly sensitive and selective method could be developed into a promising and useful technique for biological molecules determination in clinical analysis.

Aptasensor based on tripetalous cadmium sulfide-graphene electrochemiluminescence for the detection of carcinoembryonic antigen.

A facile label-free electrochemiluminescence (ECL) aptasensor, based on the ECL of cadmium sulfide-graphene (CdS-GR) nanocomposites with peroxydisulfate as the coreactant, was designed for the detection of carcinoembryonic antigen (CEA). Tripetalous CdS-GR nanocomposites were synthesized through a simple onepot solvothermal method and immobilized on the glassy carbon electrode surface. L-Cystine (L-cys) could largely promote the electron transfer and enhance the ECL intensity. Gold nanoparticles (AuNPs) were assembled onto the L-cys film modified electrode for aptamer immobilization and ECL signal amplification. The aptamer modified with thiol was adsorbed onto the surface of the AuNPs through a Au-S bond. Upon hybridization of the aptamer with the target protein, the sequence could conjugate CEA to form a Y architecture. With CEA as a model analyte, the decreased ECL intensity is proportional to the CEA concentration in the range of 0.01-10.0 ng mL(-1) with a detection limit of 3.8 pg mL(-1) (S/N = 3). The prepared aptasensor was applied to the determination of CEA in human serum samples. The recoveries of CEA in the human serum samples were between 85.0% and 109.5%, and the RSD values were no more than 3.4%.

In Situ Growth Reaction on Photoelectrodes of Single-Atom Fe Incorporated Bi4O5I2: A General Photoelectrochemical Immunoassay Toward Sensitive Protein Analysis.

As one of the interesting signaling mechanisms, the in situ growth reaction on a photoelectrode has proven its powerful potential in photoelectrochemical (PEC) bioanalysis. However, the specific interaction between the signaling species with the photoactive materials limits the general application of the signal mechanism. Herein, on the basis of an in situ growth reaction on a photoelectrode of single-atom-based photoactive material, a general PEC immunoassay was developed in a split-type mode consisting of the immunoreaction and PEC detection procedure. Specifically, a single-atom photoactive material that incorporates Fe atoms into layered Bi4O5I2 (Bi4O5I2-Fe SAs) was used as a photoelectrode for PEC detection. The sandwich immunoreaction was performed in a well of a 96-well plate using Ag nanoparticles (Ag NPs) as signal tracers. In the PEC detection procedure, the Ag+ converted from Ag NPs were transferred onto the surface of the Bi4O5I2-Fe SAs photoelectrode and thereafter AgI was generated on the Bi4O5I2-Fe SAs in situ to form a heterojunction through the reaction of Ag+ with Bi4O5I2-Fe SAs. The formation of heterojunction greatly promoted the electro-hole separation, boosting the photocurrent response. Exemplified by myoglobin (Myo) as the analyte, the immunosensor achieved a wide linear range from 1.0 × 10-11 to 5.0 × 10-8 g mL-1 with a detection limit of 3.5 × 10-12 g mL-1. This strategy provides a general PEC immunoassay for disease-related proteins, as well as extends the application scope of in situ growth reaction in PEC analysis.

In Situ Formation of Bi2MoO6-Bi2S3 Heterostructure: A Proof-Of-Concept Study for Photoelectrochemical Bioassay of l-Cysteine.

A novel signal-increased photoelectrochemical (PEC) biosensor for l-cysteine (L-Cys) was proposed based on the Bi2MoO6-Bi2S3 heterostructure formed in situ on the indium-tin oxide (ITO) electrode. To fabricate the PEC biosensor, Bi2MoO6 nanoparticles were prepared by a hydrothermal method and coated on a bare ITO electrode. When L-Cys existed, Bi2S3 was formed in situ on the interface of the Bi2MoO6/ITO electrode by a chemical displacement reaction. Under the visible light irradiation, the Bi2MoO6-Bi2S3/ITO electrode exhibited evident enhancement in photocurrent response compared with the Bi2MoO6/ITO electrode, owing to the signal-increased sensing system and the excellent property of the formed Bi2MoO6-Bi2S3 heterostructure such as the widened light absorption range and efficient separation of photo-induced electron-hole pairs. Under the optimal conditions, the sensor for L-Cys detection has a linear range from 5.0 × 10-11 to 1.0 × 10-4 mol L-1 and a detection limit of 5.0 × 10-12 mol L-1. The recoveries ranging from 90.0% to 110.0% for determining L-Cys in human serum samples validated the applicability of the biosensor. This strategy not only provides a method for L-Cys detection but also broadens the application of the PEC bioanalysis based on in situ formation of photoactive materials.

Liposome-assisted chemical redox cycling strategy for advanced signal amplification: A proof-of-concept toward sensitive electrochemiluminescence immunoassay.

This work presents a novel signal amplification strategy for electrochemiluminescence (ECL) biosensor based on liposome-assisted chemical redox cycling for in situ formation of Au nanoparticles (Au NPs) on TiO2 nanotubes (TiO2 NTs) electrode. The system was exemplified by ascorbic acid (AA)-loaded liposome, the redox cycling of AA utilizing tris (2-carboxyethyl) phosphine (TCEP) as reductant, and the use of Au nanoclusters (Au NCs)/TiO2 NTs as working electrode to implement the ECL detection of prostate specific antigen (PSA). Specifically, the AA-loaded liposomes were used as tags to label the captured PSA through a sandwich immunoreaction. After the lysate of the liposome was transferred onto the interface of Au NCs/TiO2 NTs in the presence of Au3+ and TECP, the chemical redox cycling was triggered. In the cycling, Au3+ was directly reduced in situ by AA to form Au NPs on Au NCs/TiO2 NTs electrode, whereas the oxidation product of AA was reduced by TCEP to regenerate AA. The large loading capacity of the liposome and chemical redox cycling resulted in the incomplete reduction of the Au NCs to Au NPs on the TiO2 NTs electrode, enhancing the ECL intensity greatly. The multiple signal amplification strategy achieved an ultrasensitive detection for PSA with a detection limit down to 6.7 × 10-15 g mL-1 and a wide linear concentration range from 1.0 × 10-14 to 1.0 × 10-8 g mL-1. It is believed that this work is anticipated to extend the employment of advanced chemical redox cycling reaction in the field of ECL bioassays.

Sensitive chemiluminescence immunoassay by capillary electrophoresis with gold nanoparticles.

This technical note describes a new chemiluminescence immunoassay hyphenated to capillary electrophoresis (CE-based CL-IA) with gold nanoparticles (AuNPs) technique for biological molecules determination. AuNPs were used as a protein label reagent in the light of its excellent catalytic effect to the CL reaction of luminol and hydrogen peroxide. AuNPs conjugate with antibody (Ab) to form tagged antibody (Ab*), and then Ab* link to antigen (Ag) to produce an Ab*-Ag complex by a noncompetitive immunoreaction. The mixture of the excess Ab* and the Ab*-Ag complex was baseline separated and detected within 5 min under the optimized conditions. This new protocol was evaluated with human immunoglobulin G (IgG) as the target molecule. The calibration curve of IgG was in the range of 0.008-5 µg/mL with a correlation coefficient of 0.995. The detection limit (S/N = 3) of IgG was 1.14 × 10(-3) µg/mL (7.1 pmol/L, 0.39 amol). The proposed AuNPs enhanced CE-based CL-IA method was successfully applied for the quantification of IgG in human sera from patients. It proves that the present method could be developed into a new and sensitive biochemical analysis technique.

A novel split-type photoelectrochemical immunosensor based on chemical redox cycling amplification for sensitive detection of cardiac troponin I.

Photoelectrochemical (PEC) immunoassay is a burgeoning and promising bioanalytical method. However, the practical application of PEC still exist some challenges such as the inevitable damage of biomolecules caused by the PEC system and the unsatisfactory sensitivity for biomarkers with low abundance in real sample. To solve the problems, we integrated the cosensitized structure of Ag2S/ZnO nanocomposities as photoelectrode with photogenerated hole-induced chemical redox cycling amplification (CRCA) strategy to develop a split-type PEC immunosensor for cardiac troponin I (cTnI) with high sensitivity. Initially, the immunoreaction was carried out on the 96-well plates in which alkaline phosphatase (ALP) could catalyze ascorbic acid 2-phosphate (AAP) to generate the signal-reporting species ascorbic acid (AA). Subsequently, the AA participated and the tris (2-carboxyethyl) phosphine (TCEP) mediated chemical redox cycling reaction took place on the photoelectrode, thus leading to signal amplification. Under the optimized conditions, the immunosensor demonstrated a detection limit (LOD) of 3.0 × 10-15 g mL-1 with a detection range of 1.0 × 10-14 g mL-1 to 1.0 × 10-9 g mL-1 for cTnI. Impressively, the proposed method could determine the cTnI in human serum samples with high sensitivity and satisfactory accuracy. Considering the virtues of the photoelectrode and the chemical redox cycling strategy, the method would hold great potential for highly sensitive biosensing and bioanalysis.

A novel chemiluminescence imaging immunosensor for prostate specific antigen detection based on a multiple signal amplification strategy.

A novel chemiluminescence (CL) imaging platform was constructed for prostate specific antigen (PSA) detection in a multiple signal amplifying manner. To construct the platform, the primary antibody for PSA was firstly immobilized on a O-ring area of a glass slide for recognizing the PSA. The horseradish peroxidase (HRP) and the secondary antibody of PSA (Ab2) functionalized Au NPs (HRP-Au NPs-Ab2) were modified on the platform through immunoreaction between PSA and Ab2. The excellent catalytic effect of Au NPs and HRP on the HRP-Au NPs-Ab2 to the luminol-H2O2 CL system provided the dual-signal amplification for PSA detection. To further enhance the sensitivity, tyramine signal amplification (TSA) strategy was introduced: tyramine-HRP conjugates were added into the O-ring reservoir and thus tyramine-HRP repeats formed in the presence of H2O2, generating a multiple signal amplification because of the large amounts of HRP on the sensing interface. The excellent performance of HRP-Au NPs-Ab2 and TSA strategy endows the CL platform with high sensitivity. The PSA was detected with a photomultiplier tube (PMT) and visually analyzed by a charge coupled device (CCD), respectively. The linear ranges of PMT and CCD for PSA are 0.1-100.0 ng mL-1 with a detection limit of 0.05 pg mL-1 and 0.5 - 100.0 ng mL-1 with a detection limit of 0.1 pg mL-1, respectively. The levels of PSA in several human serum samples were determined and the recoveries are ranged from 82.5% - 117.0%. This CL immunosensing platform holds great potential for bioactive molecules detection visually and sensitively.

Chemical-chemical redox cycling amplification strategy in a self-powered photoelectrochemical system: a proof of concept for signal amplified photocathodic immunoassay.

A chemical-chemical redox cycling amplification strategy was introduced into a photocathodic immunosensing system. To prove the applicability of the method, a novel self-powered photochemical system by integrating the photoanode and photocathode was designed for protein analysis.

A potentiometric resolved photoelectrochemical system based on CdS nanowires and SnNb2O6 nanosheets: a case application for dual biomarker analysis.

A potentiometric resolved photoelectrochemical (PEC) system based on CdS nanowires and SnNb2O6 nanosheets was developed. To prove the applicability of this system in PEC multi-biomarker analysis, a label free PEC immunosensor for two cardiac biomarkers, myoglobin and cardiac troponin I, was constructed.