RESUMO
Introduction: The coronavirus disease 2019 (COVID-19) heralded an unprecedented increase in telemedicine utilization. Our objective was to assess patient satisfaction with telemedicine during the COVID-19 era. Methods: Telemedicine visit data were gathered from Stanford Health Care (Stanford) and the Hospital for Special Surgery (HSS). Patient satisfaction data from HSS were captured from a Press-Ganey questionnaire between April 19, 2020, and December 12, 2020, whereas Stanford data were taken from a novel survey instrument that was distributed to all patients between June 22, 2020, and November 1, 2020. Participants: There were 60,550 telemedicine visits at Stanford, each linked with a postvisit survey. At HSS, there were 66,349 total telemedicine visits with 7,348 randomly linked with a postvisit survey. Main Outcomes and Measures: Two measures of patient satisfaction were used for this study: (1) a patient's "overall visit score" and (2) whether the patient indicated the highest possible "likelihood to recommend" (LTR) score (LTR top box score). Results: The LTR top box percentage at Stanford increased from 69.6% to 74.0% (p = 0.0002), and HSS showed no significant change (p = 0.7067). In the multivariable model, the use of a cell phone (adjusted odds ratio [aOR]: 1.18; 95% confidence interval [CI]: 1.12-1.23) and tablet (aOR: 1.15; 95% CI: 1.07-1.23) was associated with higher overall scores, whereas visits with interrupted connections (aOR: 0.49; 95% CI: 0.42-0.57) or help required to connect (aOR: 0.49; 95% CI: 0.42-0.56) predicted lower patient satisfaction. Conclusions: We present the largest published description of patient satisfaction with telemedicine, and we identify important telemedicine-specific factors that predict increased overall visit score. These include the use of cell phones or tablets, phone reminders, and connecting before the visit was scheduled to begin. Visits with poor connectivity, extended wait times, or difficulty being seen, examined, or understood by the provider were linked with reduced odds of high scores. Our results suggest that attention to connectivity and audio/visual definition will help optimize patient satisfaction with future telemedicine encounters.
Assuntos
COVID-19 , Telemedicina , Humanos , Avaliação de Resultados da Assistência ao Paciente , Satisfação do Paciente , Satisfação Pessoal , SARS-CoV-2RESUMO
Indian orthopedists have a legacy dating back more than 4000 years. Starting with the Harappan civilization, ancient orthopaedic surgeons reduced fractures and conducted therapeutic trepanations. Since then, Indian physicians have pioneered many of the orthopaedic techniques still used today - including the use of prosthetics, fracture tables, and rehabilitative physical therapy. Today, orthopaedic surgeons coexist with traditional Indian bonesetters. Although bonesetting practices can have complication rates as high as 40%, bonesetters still handle a majority of fractures in India and are often culturally preferred. Importantly though, bonesetters are often the only expedient option available in both rural and urban settings.
Assuntos
Fraturas Ósseas , Procedimentos Ortopédicos , Ortopedia , Fraturas Ósseas/epidemiologia , Fraturas Ósseas/cirurgia , Humanos , Índia/epidemiologia , Procedimentos Ortopédicos/história , Ortopedia/históriaRESUMO
BACKGROUND: With the shift in hip fracture epidemiology toward older individuals as well as the shift in demographics toward nonagenarians, it is important to understand the outcomes of treatment for these patients. METHODS: Geriatric patients (≥65 years old) who underwent surgery for hip fracture were identified in the 2005-2017 National Surgical Quality Improvement Program database and stratified into 2 age groups: <90 and ≥90 years old (nonagenarians). Preoperative and procedural characteristics were compared. Multivariate regressions were used to compare risk for complications and 30-day readmissions. Risk factors for serious adverse events (SAEs) and 30-day mortality in nonagenarians were characterized. RESULTS: This study included 51,327 <90 year olds and 15,798 nonagenarians. Overall rate of SAEs in nonagenarians was 19.89% while in <90 year olds was 14.80%. Multivariate analysis revealed higher risk for blood transfusion (relative risk [RR] = 1.21), death (RR = 1.74), pneumonia (RR = 1.24), and cardiac complications (RR = 1.33) in nonagenarians (all P < .001). Risk factors for SAEs in nonagenarians include American Society of Anesthesiologists ≥3, dependent functional status, admitted from nursing home/chronic/intermediate care, preoperative hypoalbuminemia, and male gender (all P < .05), but not time to surgery (P > .05). In fact, increased time to surgery in nonagenarians was associated with lower risk of 30-day mortality (RR = 0.90, P = .048). CONCLUSION: Overall complication risk after hip fracture fixation in nonagenarians remains relatively low but higher than their younger counterparts. Interestingly, since time to surgery was not associated with adverse outcomes in nonagenarians, the commonly accepted 48-hour operative window may not be critical to this population. Additional time for preoperative medical optimization in this vulnerable population appears prudent.
Assuntos
Fraturas do Quadril , Idoso , Idoso de 80 Anos ou mais , Fixação de Fratura , Fraturas do Quadril/epidemiologia , Fraturas do Quadril/cirurgia , Humanos , Masculino , Readmissão do Paciente , Complicações Pós-Operatórias/epidemiologia , Estudos Retrospectivos , Fatores de RiscoRESUMO
BACKGROUND: Transverse patella fractures are often treated with cannulated screws and a figure-of-eight anterior tension band. A common teaching regarding this construct is to recess the screws so that their distal ends do not protrude beyond the patella because doing so may improve biomechanical performance. However, there is a lack of biomechanical or clinical data to support this recommendation. QUESTION: In the treatment of transverse patella fractures, is there a difference between prominent and recessed cannulated screw constructs, supplemented by tension banding, in terms of gap formation from cyclic loading and ultimate load to failure? METHODS: Ten pairs of fresh-frozen cadaver legs (mean donor age, 72 years; range, 64-89 years) were randomized in a pairwise fashion to prominent or standard-length screws. In the prominent screw group, screw length was 15% longer than the measured trajectory, resulting in 4 to 6 mm of additional length. Each patella was transversely osteotomized at its midportion and fixed with screws and an anterior tension band. Gap formation was measured over 40 loaded flexion-extension cycles (90° to 5°). Ultimate load to failure was assessed with a final monotonic test after cyclic loading. Areal bone mineral density (BMD) of each patella was measured with dual energy x-ray absorptiometry (DEXA). There was no difference in BMD between the recessed (1.06 ± 0.262 g/cm) and prominent (1.03 ± 0.197 g/cm) screw groups (p = 0.846). Difference in gap formation was assessed with a Wilcoxon Rank Sum Test. Ultimate load to failure and BMD were assessed with a paired t-test. RESULTS: Patella fractures fixed with prominent cannulated screws demonstrated larger gap formation during cyclic loading. Median gap size at the end of cyclic loading was 0.13 mm (range, 0.00-2.92 mm) for the recessed screw group and 0.77 mm (range, 0.00-7.50 mm) for the prominent screw group (p = 0.039; 95% confidence interval [CI] difference of geometric means, 0.05-2.12 mm). There was no difference in ultimate failure load between the recessed screw (891 ± 258 N) and prominent screw (928 ± 268 N) groups (p = 0.751; 95% CI difference of means, -226 to 301 N). Ultimate failure load was correlated with areal BMD (r = 0.468; p = 0.046). CONCLUSIONS: In this cadaver study, when using cannulated screws and a figure-of-eight tension band to fix transverse patella fractures, prominent screws reduced the construct's ability to resist gap formation during cyclic loading testing. CLINICAL RELEVANCE: This biomechanical cadaver study found that the use of prominent cannulated screws for the fixation of transverse patella fractures increases the likelihood of interfragmentary gap formation, which may potentially increase the risk of fracture nonunion and implant failure. These findings suggest that proximally and distally recessed screws may increase construct stability, which may increase the potential for bony healing. The findings support further laboratory and clinical investigations comparing recessed screws supplemented by anterior tension banding with other repair methods that are in common use, such as transosseous suture repair.
Assuntos
Fixação de Fratura/métodos , Fraturas Ósseas/cirurgia , Patela/cirurgia , Idoso , Idoso de 80 Anos ou mais , Parafusos Ósseos , Cadáver , Humanos , Pessoa de Meia-Idade , Patela/lesõesRESUMO
BACKGROUND: Patellar tendon ruptures commonly are repaired using transosseous patellar drill tunnels with modified-Krackow sutures in the patellar tendon. This simple suture technique has been associated with failure rates and poor clinical outcomes in a modest proportion of patients. Failure of this repair technique can result from gap formation during loading or a single catastrophic event. Several augmentation techniques have been described to improve the integrity of the repair, but standardized biomechanical evaluation of repair strength among different techniques is lacking. QUESTIONS/PURPOSES: The purpose of this study was to describe a novel figure-of-eight suture technique to augment traditional fixation and evaluate its biomechanical performance. We hypothesized that the augmentation technique would (1) reduce gap formation during cyclic loading and (2) increase the maximum load to failure. METHODS: Ten pairs (two male, eight female) of fresh-frozen cadaveric knees free of overt disorders or patellar tendon damage were used (average donor age, 76 years; range, 65-87 years). For each pair, one specimen underwent the standard transosseous tunnel suture repair with a modified-Krackow suture technique and the second underwent the standard repair with our experimental augmentation method. Nine pairs were suitable for testing. Each specimen underwent cyclic loading while continuously measuring gap formation across the repair. At the completion of cyclic loading, load to failure testing was performed. RESULTS: A difference in gap formation and mean load to failure was seen in favor of the augmentation technique. At 250 cycles, a 68% increase in gap formation was seen for the control group (control: 5.96 ± 0.86 mm [95% CI, 5.30-6.62 mm]; augmentation: 3.55 ± 0.56 mm [95% CI, 3.12-3.98 mm]; p = 0.02). The mean load to failure was 13% greater in the augmentation group (control: 899.57 ± 96.94 N [95% CI, 825.06-974.09 N]; augmentation: 1030.70 ± 122.41 N [95% CI, 936.61-1124.79 N]; p = 0.01). CONCLUSIONS: This biomechanical study showed improved performance of a novel augmentation technique compared with the standard repair, in terms of reduced gap formation during cyclic loading and increased maximum load to failure. CLINICAL RELEVANCE: Decreased gap formation and higher load to failure may improve healing potential and minimize failure risk. This study shows a potential biomechanical advantage of the augmentation technique, providing support for future clinical investigations comparing this technique with other repair methods that are in common use such as transosseous suture repair.
Assuntos
Traumatismos do Joelho/cirurgia , Procedimentos Ortopédicos/métodos , Ligamento Patelar/cirurgia , Técnicas de Sutura , Traumatismos dos Tendões/cirurgia , Idoso , Idoso de 80 Anos ou mais , Fenômenos Biomecânicos , Cadáver , Feminino , Humanos , Traumatismos do Joelho/fisiopatologia , Masculino , Ligamento Patelar/fisiopatologia , Distribuição Aleatória , Estresse Mecânico , Traumatismos dos Tendões/fisiopatologia , Falha de TratamentoRESUMO
VIDEO AVAILABLE AT: https://ota.org/education/ota-online-resources/video-library-procedures-techniques/anterior-iliac-crest-bone-0.
Assuntos
Acetábulo , Transplante Ósseo , Ílio , Humanos , Ílio/transplante , Ílio/cirurgia , Transplante Ósseo/métodos , Acetábulo/cirurgia , Coleta de Tecidos e Órgãos/métodosRESUMO
Objectives: The objective of this study was to compare the biomechanical properties of locked and nonlocked diaphyseal fixation in a model of distal femur fractures using osteoporotic and nonosteoporotic human cadaveric bone. Methods: A supracondylar osteotomy was created to mimic a fracture (OTA/AO 33A3) in osteoporotic (n = 4) and nonosteoporotic (n = 5) cadaveric distal femurs. The left and right femurs of each pair were instrumented with a distal femoral locking plate and randomly assigned to have diaphyseal fixation with either locked or nonlocked screws. The construct was cyclically axially loaded, and construct stiffness and load to failure were evaluated. Results: In osteoporotic bone, locked constructs were more stiff than nonlocked constructs (mean 143 vs. 98 N/mm when all time points combined, P < 0.001). However, in nonosteoporotic bone, locked constructs were less stiff than nonlocked constructs (mean 155 N/mm vs. 185 N/mm when all time points combined, P < 0.001). In osteoporotic bone, the average load to failure was greater in the locked group than in the nonlocked group (mean 1159 vs. 991 N, P = 0.01). In nonosteoporotic bone, the average load to failure was greater for the nonlocked group (mean 1348 N vs. 1214 N, P = 0.02). Bone mineral density was highly correlated with maximal load to failure (R2 = 0.92, P = 0.001) and stiffness (R2 = 0.78, P = 0.002) in nonlocked constructs but not in locked constructs. Conclusions: Contrary to popular belief, locked plating constructs are not necessarily stiffer than nonlocked constructs. In healthy nonosteoporotic bone, locked diaphyseal fixation does not provide a stiffer construct than nonlocked fixation. Bone quality has a profound influence on the stiffness of nonlocked (but not locked) constructs in distal femur fractures.
RESUMO
SUMMARY: Tibial plateau fractures with severely displaced articular injuries and significant deformity to the surrounding metaphyseal bone (including the hyperextension varus bicondylar pattern) can be challenging to stabilize due to resulting large bone voids uncontained by metaphyseal cortex. The purpose of this report was to describe a technique to support the plateau articular surface in these cases and report on outcomes of a small series. This technique uses a small or mini fragment plate, contoured to function as an intraosseous shelf plate, with the "shelf" portion inserted into the bone beneath the articular surface to support it. This technique provides fixed-angle support to the fragment. There are some advantages of this technique compared to structural allograft, large volume ceramic bone void filler, a spine cage, or other trabecular metal object, including the ability to remove the plate later, ability to tension the plate against the depressed articular surface, ability to place screws or other allograft near the implant, wide availability of the implant, and familiarity of orthopaedic trauma surgeons with placing plates and screws to hold reductions. The technique is particularly useful in patterns with uncontained articular depression and a large metaphyseal void.
Assuntos
Placas Ósseas , Fixação Interna de Fraturas , Fraturas da Tíbia , Humanos , Fraturas da Tíbia/cirurgia , Fixação Interna de Fraturas/métodos , Fixação Interna de Fraturas/instrumentação , Masculino , Pessoa de Meia-Idade , Feminino , Adulto , Resultado do Tratamento , Idoso , Adulto Jovem , Fraturas do Planalto TibialRESUMO
OBJECTIVES: To evaluate radiographic and clinical patient-reported outcomes following dorsal hook plating of displaced patella fractures with permittance of immediate postoperative active closed chain range of motion. DESIGN: Retrospective review of prospectively collected data. SETTING: Urban academic level 1 trauma center. PATIENT SELECTION CRITERIA: Adult patients with displaced patella fractures (OTA/AO 34C1-3) who underwent dorsal plating with immediate range of motion between 2018 and 2023. OUTCOME MEASURES AND COMPARISONS: Numerical Rating Scale for Pain, Knee Outcome Score (KOS-ADL), Tegner-Lysholm score, radiographic union, and wound complications were collected. RESULTS: Sixty-one patients were included (47 female) with an average age of 63 years (SD 14.7, range 22-86 years). The mean BMI was 24.2 (SD 3.6, range 16.6-33.3). There were 13 34-C2 and 48 34-C3 fractures. All but 2 patients (96.7%) achieved bony union after the index procedure. 89% (n = 54) of patients completed outcome surveys with at least 6-month follow-up. Six patients (9.8%) underwent removal of plate implant at a mean of 15.1 months postoperatively. The mean KOS-ADL score was 91.4, the mean Tegner-Lysholm score was 78.1, and the mean NRS was 2.7. CONCLUSIONS: Dorsal hook plating offers secure fixation to allow early range of motion, reliable fixation with low nonunion and implant failure rates, low implant removal rates, and satisfactory patient-reported outcomes. LEVEL OF EVIDENCE: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.
Assuntos
Placas Ósseas , Fixação Interna de Fraturas , Fraturas Ósseas , Patela , Amplitude de Movimento Articular , Humanos , Pessoa de Meia-Idade , Feminino , Masculino , Fixação Interna de Fraturas/métodos , Fixação Interna de Fraturas/instrumentação , Idoso , Adulto , Patela/lesões , Patela/cirurgia , Estudos Retrospectivos , Idoso de 80 Anos ou mais , Fraturas Ósseas/cirurgia , Resultado do Tratamento , Adulto Jovem , Remoção de Dispositivo , Fratura da PatelaRESUMO
The IncRNA Malat1 was initially believed to be dispensable for physiology due to the lack of observable phenotypes in Malat1 knockout (KO) mice. However, our study challenges this conclusion. We found that both Malat1 KO and conditional KO mice in the osteoblast lineage exhibit significant osteoporosis. Mechanistically, Malat1 acts as an intrinsic regulator in osteoblasts to promote osteogenesis. Interestingly, Malat1 does not directly affect osteoclastogenesis but inhibits osteoclastogenesis in a non-autonomous manner in vivo via integrating crosstalk between multiple cell types, including osteoblasts, osteoclasts and chondrocytes. Our findings substantiate the existence of a novel remodeling network in which Malat1 serves as a central regulator by binding to ß-catenin and functioning through the ß-catenin-OPG/Jagged1 pathway in osteoblasts and chondrocytes. In pathological conditions, Malat1 significantly promotes bone regeneration in fracture healing. Bone homeostasis and regeneration are crucial to well-being. Our discoveries establish a previous unrecognized paradigm model of Malat1 function in the skeletal system, providing novel mechanistic insights into how a lncRNA integrates cellular crosstalk and molecular networks to fine tune tissue homeostasis, remodeling and repair.
RESUMO
SUMMARY: The stability of intertrochanteric fractures depends upon multiple factors including the fracture displacement, location and pattern, the type of fixation used for stabilization, and the loading that the fracture undergoes postfixation. Traditional classification systems are of limited utility because they typically stratify intertrochanteric fractures as stable or unstable based purely on the fracture pattern without consideration of the stability after fixation. Biomechanical studies evaluating the stability of various fixation constructs should include physiologic loading, including rotation around the axis of the femoral neck, and reproduce clinical failure modes to be clinically relevant. A growing body of evidence indicates that the type of fixation substantially affects postoperative stability of intertrochanteric fractures.
Assuntos
Fraturas do Quadril , Humanos , Fraturas do Quadril/diagnóstico por imagem , Fraturas do Quadril/cirurgia , Colo do Fêmur , Período Pós-OperatórioRESUMO
Modern blocking techniques are useful to achieve anatomic alignment and stable fixation during end-segment nailing. Whether with screws or drill bits, blocking implants can correct both angular and translational deformities. Understanding the biomechanics of blocking implants allows the surgeon to properly plan their placement based on principles rather than dogma. We use case examples to highlight updates in blocking techniques during acute surgical fixation and chronic deformity correction.
Assuntos
Fixação Intramedular de Fraturas , Humanos , Fixação Intramedular de Fraturas/métodos , Parafusos Ósseos , Extremidade InferiorRESUMO
OBJECTIVES: The sagittal plane of the distal tibia has not been well-described. This study sought to characterize sagittal plane morphology, determine symmetry from side to side, and identify differences based on hindfoot alignment. METHODS: One hundred twelve bilateral lateral weight-bearing ankle radiographs were retrospectively evaluated (224 ankles). Hindfoot alignment was classified as neutral, planus, or cavus using the Meary angle. The angle between the diaphyseal and distal tibia axes was measured, and the apex location relative to the plafond was recorded. RESULTS: A mean distal tibia apex posterior angulation (DTAPA) of 2.0° (range -2° to 7°, SD = 2.06°) was located 8.0 cm proximal to the plafond. No difference was observed from side to side in DTAPA magnitude (P = 0.36) or location (P = 0.90). Planus alignment was associated with a significantly greater DTAPA (3.05°) as compared with neutral (1.89°) (P = 0.002) and cavus (1.25°) (P < 0.001) alignment. CONCLUSION: The distal tibia has an apex posterior angulation, suggesting that the true anatomic axis of the tibia terminates just posterior to the plafond center. Hindfoot alignment is related to distal tibia morphology. DTAPA symmetry indicates that contralateral imaging can be used to guide reconstruction of patient-specific anatomy and alignment. Knowledge of the DTAPA may help mitigate sagittal malalignment during distal tibia fracture surgery.
Assuntos
Pé , Tíbia , Humanos , Tíbia/diagnóstico por imagem , Tíbia/cirurgia , Estudos Retrospectivos , Extremidade Inferior , TornozeloRESUMO
BACKGROUND: Suture buttons and metal screws have been used and compared in biomechanical, radiographic, and clinical outcome studies for syndesmotic injuries, with neither implant demonstrating clear superiority. The aim of this study was to compare clinical outcomes of both implants. METHODS: Patients who underwent syndesmosis fixation at 2 separate academic centers from 2010 through 2017 were compared. Thirty-one patients treated with a suture button and 21 patients treated with screws were included. Patients in each group were matched by age, sex, and Orthopaedic Trauma Association fracture classification. Tegner Activity Scale (TAS), Foot and Ankle Ability Measure (FAAM), patient satisfaction score, surgical failure, and reoperation rates were compared. RESULTS: Patients who underwent suture button fixation had significantly higher TAS scores than those who underwent screw fixation (p < 0.001). There was no significant difference in FAAM ADL scores between cohorts (p = 0.08). Symptomatic hardware removal rates were similar (3.2% suture button cohort vs 9.0% in screw cohort). One patient (4.5%) underwent revision surgery secondary to syndesmotic malreduction after screw fixation, for a reoperation rate of 13.5%. CONCLUSION: Patients with unstable syndesmotic injuries treated with suture button fixation had higher mean TAS scores compared to patients treated with screws. Foot and Ankle Ability Measure and ADL scores in these cohorts were similar.Level of Evidence: Level 3 Retrospective Matched Case-Cohort.
RESUMO
INTRODUCTION: An understanding of the sagittal plane morphology of the humerus is relevant during surgical fixation of humeral fractures but is not well described in the literature. The purpose of this study was to better characterize the native sagittal plane morphology of the humerus. MATERIALS AND METHODS: 170 patients with uninjured full length lateral humerus radiographs were retrospectively evaluated. The angle between the proximal humeral diaphyseal axis and the distal humeral diaphyseal axis was identified and measured. The proximal axis was defined by two points equidistant from the anterior and posterior cortex 10 mm and 100 mm distal to the metaphyseal flare, and the distal axis by two points at 10 mm and 50 mm proximal to the capitellum/trochlea. The relative location of the center of rotation of angulation (CORA) was calculated as a percentage of humeral length. RESULTS: 114 radiographs were included in the analysis (66 right humeri, 48 left humeri). The average apex posterior angulation was 6.5 +/- 2.9°. The CORA occurred at an average of 80% (SD+/-13%) of the length of the humerus (proximal to distal). Total humeral length and absolute distance to CORA were greater in males compared to females (364 ± 50 mm versus 326 ± 30 mm; p<0.001; 290 ± 68 mm versus 260 ± 48 mm; p=0.003), but there were no significant sex differences with respect to magnitude of the apex posterior angulation (p=0.077) or location of CORA as a percentage of total humeral length (p=0.916). There were no statistically significant associations between age and total humeral length (p=0.056), distance to CORA (p=0.130), location of CORA as percentage of total humeral length (p=0.753), or magnitude of angulation (p=0.075). CONCLUSION: An apex posterior bow consistently exists in the distal one-quarter of the humerus that is consistent across ages and between sexes. This normal anatomic bow is important to recognize to avoid an extension malreduction and has implications for implant fit and contouring.
Assuntos
Fraturas do Úmero , Úmero , Humanos , Masculino , Feminino , Estudos Retrospectivos , Úmero/diagnóstico por imagem , Úmero/cirurgia , Úmero/anatomia & histologia , Fraturas do Úmero/diagnóstico por imagem , Fraturas do Úmero/cirurgia , Radiografia , Fixação Interna de Fraturas/métodosRESUMO
OBJECTIVES: To assess the effects of Krackow suture technique on the vascularity of the patellar tendon. METHODS: Six fresh-frozen matched pair cadaveric knee specimens were used. The superficial femoral arteries were cannulated in all knees. The experimental knee underwent an anterior approach, patellar tendon transection from the inferior pole of the patella, 4-strand Krackow stitch placement, patellar tendon repair via 3-bone tunnels, and standard skin closure. The control knee underwent the identical procedure without Krackow stitching. All specimens then underwent precontrast and postcontrast enhanced quantitative magnetic resonance imaging assessment (with gadolinium-based contrast agent). Region of interest analysis was performed to assess for variation in signal enhancement between the experimental and control limbs in various patellar tendon regions and subregions. Latex infusion and anatomical dissection were performed to further evaluate vessel integrity and assess extrinsic vascularity. RESULTS: Quantitative magnetic resonance imaging analysis demonstrated no statistically significant difference in overall arterial contributions. A small but nonsignificant decrease of 7.5% (SD ± 7.1%) in arterial contributions to the entire tendon was observed. Small nonstatistically significant regional decreases throughout the tendon were also detected. In the regional analysis, the largest to smallest decreases in arterial contributions after suture placement were found in the inferomedial, superolateral, lateral, and inferior tendon subregions. In the anatomical dissection, nutrient branches were seen dorsally and posteroinferiorly. CONCLUSION: The vascularity of the patellar tendon was not significantly affected by Krackow suture placement. Analysis demonstrated small and not statistically significant decreases in arterial contributions, suggesting this technique does not significantly compromise arterial perfusion.
Assuntos
Ligamento Patelar , Humanos , Ligamento Patelar/diagnóstico por imagem , Ligamento Patelar/cirurgia , Tendões , Imageamento por Ressonância Magnética , Patela/cirurgia , Técnicas de SuturaRESUMO
OBJECTIVES: The main 2 forms of treatment for extraarticular proximal tibial fractures are intramedullary nailing (IMN) and locked lateral plating (LLP). The goal of this multicenter, randomized controlled trial was to determine whether there are significant differences in outcomes between these forms of treatment. DESIGN: Multicenter, randomized controlled trial. SETTING: 16 academic trauma centers. PATIENTS/PARTICIPANTS: 108 patients were enrolled. 99 patients were followed for 12 months. 52 patients were randomized to IMN, and 47 patients were randomized to LLP. INTERVENTION: IMN or lateral locked plating. MAIN OUTCOME MEASUREMENTS: Functional scoring including Short Musculoskeletal Functional Assessment, Bother Index, EQ-5Dindex and EQ-5DVAS. Secondary measures included alignment, operative time, range of motion, union rate, pain, walking ability, ability to manage stairs, need for ambulatory aid and number, and complications. RESULTS: Functional testing demonstrated no difference between the groups, but both groups were still significantly affected 12 months postinjury. Similarly, there was no difference in time of surgery, alignment, nonunion, pain, walking ability, ability to manage stairs, need for ambulatory support, or complications. CONCLUSIONS: Both IMN and LLP provide for similar outcomes after these fractures. Patients continue to improve over the course of the year after injury but remain impaired even 1 year later. LEVEL OF EVIDENCE: Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.
Assuntos
Fixação Intramedular de Fraturas , Fraturas da Tíbia , Humanos , Tíbia , Resultado do Tratamento , Fraturas da Tíbia/cirurgia , Consolidação da Fratura , Estudos RetrospectivosRESUMO
OBJECTIVES: The 2 main forms of treatment for distal femur fractures are locked lateral plating and retrograde nailing. The goal of this trial was to determine whether there are significant differences in outcomes between these forms of treatment. DESIGN: Multicenter randomized controlled trial. SETTING: Twenty academic trauma centers. PATIENTS/PARTICIPANTS: One hundred sixty patients with distal femur fractures were enrolled. One hundred twenty-six patients were followed 12 months. Patients were randomized to plating in 62 cases and intramedullary nailing in 64 cases. INTERVENTION: Lateral locked plating or retrograde intramedullary nailing. MAIN OUTCOME MEASUREMENTS: Functional scoring including Short Musculoskeletal Functional Assessment, bother index, EQ Health, and EQ Index. Secondary measures included alignment, operative time, range of motion, union rate, walking ability, ability to manage stairs, and number and type of adverse events. RESULTS: Functional testing showed no difference between the groups. Both groups were still significantly affected by their fracture 12 months after injury. There was more coronal plane valgus in the plating group, which approached statistical significance. Range of motion, walking ability, and ability to manage stairs were similar between the groups. Rate and type of adverse events were not statistically different between the groups. CONCLUSIONS: Both lateral locked plating and retrograde intramedullary nailing are reasonable surgical options for these fractures. Patients continue to improve over the course of the year after injury but remain impaired 1 year postoperatively. LEVEL OF EVIDENCE: Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.
Assuntos
Fraturas Femorais Distais , Fraturas do Fêmur , Fixação Intramedular de Fraturas , Fraturas Ósseas , Humanos , Fixação Intramedular de Fraturas/efeitos adversos , Placas Ósseas , Fixação Interna de Fraturas , Fraturas Ósseas/cirurgia , Resultado do Tratamento , Fraturas do Fêmur/cirurgia , Fraturas do Fêmur/etiologia , Consolidação da FraturaRESUMO
BACKGROUND: Spinal hardware has been adapted for fixation in the setting of anterior pelvic injury. This anterior subcutaneous pelvic fixator consists of pedicle screws placed in the supraacetabular region connected by a contoured connecting rod placed subcutaneously and above the abdominal muscle fascia. QUESTIONS/PURPOSES: We examined the placement of the components for anterior subcutaneous pelvic fixator relative to key vascular, urologic, bony, and surface structures. METHODS: We measured the CT scans of 13 patients after placement of the pelvic fixator to determine the shortest distances between the fixator components and important anatomic structures: the femoral vascular bundle, the urinary bladder, the cranial margin of the hip, the screw insertion point on the bony pelvis, the relationship between the pedicle screw and the corridor of bone in which it resided, and the position relative to the skin. RESULTS: The average distance from the vascular bundle to the pedicle screw was 4.1 cm and 2.2 cm to the connecting rod. The average distance from the connecting rod to the anterior edge of the bladder was 2.6 cm. The average distance from the screw insertion point to the hip was 2.4 cm; none penetrated the hip. The average screw was in bone for 5.9 cm. The pedicle screws were on average 2.1 cm under the skin. The average distance from the anterior skin to the connecting rod was 2.7 cm. CONCLUSIONS: Components of this anterior pelvic fixator are close to important anatomic structures. Careful adherence to the surgical technique should minimize potential risk. LEVEL OF EVIDENCE: Level IV, retrospective study. See Guidelines for Authors for a complete description of levels of evidence.
Assuntos
Fixação Interna de Fraturas/métodos , Fraturas Ósseas/cirurgia , Fixadores Internos/efeitos adversos , Complicações Intraoperatórias/etiologia , Ossos Pélvicos/cirurgia , Pinos Ortopédicos , Parafusos Ósseos , Fixação Interna de Fraturas/efeitos adversos , Fixação Interna de Fraturas/instrumentação , Fraturas Ósseas/diagnóstico por imagem , Humanos , Ossos Pélvicos/diagnóstico por imagem , Ossos Pélvicos/lesões , Complicações Pós-Operatórias , Desenho de Prótese , Radiografia , Estudos RetrospectivosRESUMO
OBJECTIVES: To characterize anatomic slope (sagittal alignment) of medial and lateral articular surfaces of the tibial plateau using x-ray and computed tomography (CT). METHODS: Fluoroscopy was used to acquire "perfect" anteroposterior (AP) images of 8 cadaveric knees by tilting a C-arm through a 30-degree cranial/caudal arc in 0.5-degree increments. Five surgeons independently selected perfect AP images that most accurately profiled medial and lateral articular surfaces. Corresponding angles were used to define tangent subchondral structures on sagittal CT that were considered as dominant bony landmarks in a protocol to determine tibial slope on sagittal CT in 46 additional cadaveric knees. RESULTS: Mean perfect C-arm AP angles were 4.2 degrees ± 2.6 degrees posterior for the medial plateau and 5.0 degrees ± 3.8 degrees posterior for the lateral plateau. It was noted that images acquired within a range of angles (medial range, 1.8 degrees ± 0.7 degrees; lateral range, 3.9 degrees ± 3.8 degrees) rather than a single angle adequately profiled each compartment. Using the CT protocol, mean medial slope (5.2 degrees ± 2.3 degrees posterior; range, 0.9-11.5 degrees) was less than lateral slope (7.5 degrees ± 3.0 degrees posterior; range 0.6-12.5 degrees; P < 0.001) in 54 knees. The difference between medial and lateral slopes in any individual specimen ranged from 3.1 degree more medially to 6.8 degrees more laterally. No differences were noted between right and left knees in paired specimens. CONCLUSIONS: On average, tibial slope in the lateral plateau is slightly greater than that in the medial plateau, and variation exists between compartments across patients. Because tibial slope is similar between contralateral limbs, evaluating slope on the uninjured side can provide a template for sagittal plane reduction of tibial plateau fractures.