X-ray structure of the MMTV-A nucleosome core.

The conformation of DNA bound in nucleosomes depends on the DNA sequence. Questions such as how nucleosomes are positioned and how they potentially bind sequence-dependent nuclear factors require near-atomic resolution structures of the nucleosome core containing different DNA sequences; despite this, only the DNA for two similar α-satellite sequences and a sequence (601) selected in vitro have been visualized bound in the nucleosome core. Here we report the 2.6-Å resolution X-ray structure of a nucleosome core particle containing the DNA sequence of nucleosome A of the 3'-LTR of the mouse mammary tumor virus (147 bp MMTV-A). To our knowledge, this is the first nucleosome core particle structure containing a promoter sequence and crystallized from Mg(2+) ions. It reveals sequence-dependent DNA conformations not seen previously, including kinking into the DNA major groove.

Structure and mechanism of the chromatin remodelling factor ISW1a.

Site-specific recognition of DNA in eukaryotic organisms depends on the arrangement of nucleosomes in chromatin. In the yeast Saccharomyces cerevisiae, ISW1a and related chromatin remodelling factors are implicated in establishing the nucleosome repeat during replication and altering nucleosome position to affect gene activity. Here we have solved the crystal structures of S. cerevisiae ISW1a lacking its ATPase domain both alone and with DNA bound at resolutions of 3.25 Å and 3.60 Å, respectively, and we have visualized two different nucleosome-containing remodelling complexes using cryo-electron microscopy. The composite X-ray and electron microscopy structures combined with site-directed photocrosslinking analyses of these complexes suggest that ISW1a uses a dinucleosome substrate for chromatin remodelling. Results from a remodelling assay corroborate the dinucleosome model. We show how a chromatin remodelling factor could set the spacing between two adjacent nucleosomes acting as a 'protein ruler'.

Structure of the full-length yeast Arp7-Arp9 heterodimer.

The nuclear actin-related proteins Arp7 and Arp9 are components of the yeast SWI/SNF and RSC chromatin-remodelling complexes. The 3.1 Šresolution crystal structure reported here shows that the full-length Arp7 and Arp9 proteins exist as a dimer without a requirement for additional polypeptides. Of the 11 actin-related proteins, Arp7 and Arp9 are the only two directly demonstrated to form a dimer within this family. The Arp7-Arp9 heterodimer is unlikely to form an actin-like filament based on modelling using the structure. The Arp7-Arp9 structure reveals that its dimerization interface is not altered when bound in a complex with the SWI/SNF Snf2 HSA domain and the regulatory protein Rtt102.

Automated unrestricted multigene recombineering for multiprotein complex production.

Structural and functional studies of many multiprotein complexes depend on recombinant-protein overexpression. Rapid revision of expression experiments and diversification of the complexes are often crucial for success of these projects; therefore, automation is increasingly indispensable. We introduce Acembl, a versatile and automatable system for protein-complex expression in Escherichia coli that uses recombineering to facilitate multigene assembly and diversification. We demonstrated protein-complex expression using Acembl, including production of the complete prokaryotic holotranslocon.

Nucleosome recognition and spacing by chromatin remodelling factor ISW1a.

Nucleosomes are actively positioned along DNA by ATP-dependent, chromatin remodelling factors. A structural model for the ISW1a chromatin remodelling factor from Saccharomyces cerevisiae in complex with a dinucleosome substrate was constructed from the X-ray structures of ISW1a (ΔATPase) with and without DNA bound, two different cryo-EM (cryo-electron microscopy) structures of ISW1a (ΔATPase) bound to a nucleosome, and site-directed photo-cross-linking analyses in solution. The X-ray structure of ISW1a (ΔATPase) with DNA bound suggests that DNA sequence may be involved in nucleosome recognition and thereby specificity of promoter interaction. The model suggests how the highly ordered nucleosome arrays observed by mapping nucleosomes in genes and their promoter regions could be generated by a chromatin remodelling factor.

Robots, pipelines, polyproteins: enabling multiprotein expression in prokaryotic and eukaryotic cells.

Multiprotein complexes catalyze vital biological functions in the cell. A paramount objective of the SPINE2 project was to address the structural molecular biology of these multiprotein complexes, by enlisting and developing enabling technologies for their study. An emerging key prerequisite for studying complex biological specimens is their recombinant overproduction. Novel reagents and streamlined protocols for rapidly assembling co-expression constructs for this purpose have been designed and validated. The high-throughput pipeline implemented at IGBMC Strasbourg and the ACEMBL platform at the EMBL Grenoble utilize recombinant overexpression systems for heterologous expression of proteins and their complexes. Extension of the ACEMBL platform technology to include eukaryotic hosts such as insect and mammalian cells has been achieved. Efficient production of large multicomponent protein complexes for structural studies using the baculovirus/insect cell system can be hampered by a stoichiometric imbalance of the subunits produced. A polyprotein strategy has been developed to overcome this bottleneck and has been successfully implemented in our MultiBac baculovirus expression system for producing multiprotein complexes.

X-ray structure of a tetranucleosome and its implications for the chromatin fibre.

DNA in eukaryotic chromosomes is organized in arrays of nucleosomes compacted into chromatin fibres. This higher-order structure of nucleosomes is the substrate for DNA replication, recombination, transcription and repair. Although the structure of the nucleosome core is known at near-atomic resolution, even the most fundamental information about the organization of nucleosomes in the fibre is controversial. Here we report the crystal structure of an oligonucleosome (a compact tetranucleosome) at 9 A resolution, solved by molecular replacement using the nucleosome core structure. The structure shows that linker DNA zigzags back and forth between two stacks of nucleosome cores, which form a truncated two-start helix, and does not follow a path compatible with a one-start solenoidal helix. The length of linker DNA is most probably buffered by stretching of the DNA contained in the nucleosome cores. We have built continuous fibre models by successively stacking tetranucleosomes one on another. The resulting models are nearly fully compacted and most closely resemble the previously described crossed-linker model. They suggest that the interfaces between nucleosomes along a single helix start are polymorphic.

Multiprotein expression strategy for structural biology of eukaryotic complexes.

The concept of the cell as a collection of multisubunit protein machines is emerging as a cornerstone of modern biology, and molecular-level study of these machines in most cases will require recombinant production. Here, we present and validate a strategy to rapidly produce, permutate, and posttranslationally modify large, eukaryotic multiprotein complexes by using DNA recombination in a process that is fully automatable. Parallel production of 12 protein complex variants within a period of weeks resulted in specimens of sufficient quantity and homogeneity for structural biology applications.

DNA stretching and extreme kinking in the nucleosome core.

DNA stretching in chromatin may facilitate its compaction and influence site recognition by nuclear factors. In vivo, stretching has been estimated to occur at the equivalent of one to two base-pairs (bp) per nucleosome. We have determined the crystal structure of a nucleosome core particle containing 145 bp of DNA (NCP145). Compared to the structure with 147 bp, the NCP145 displays two incidences of stretching one to two double-helical turns from the particle dyad axis. The stretching illustrates clearly a mechanism for shifting DNA position by displacement of a single base-pair while maintaining nearly identical histone-DNA interactions. Increased DNA twist localized to a short section between adjacent histone-DNA binding sites advances the rotational setting, while a translational component involves DNA kinking at a flanking region that initiates elongation by unstacking bases. Furthermore, one stretched region of the NCP145 displays an extraordinary 55 degrees kink into the minor groove situated 1.5 double-helical turns from the particle dyad axis, a hot spot for gene insertion by HIV-integrase, which prefers highly distorted substrate. This suggests that nucleosome position and context within chromatin could promote extreme DNA kinking that may influence genomic processes.

Site-Specific Disulfide Crosslinked Nucleosomes with Enhanced Stability.

We engineered nucleosome core particles (NCPs) with two site-specific cysteine crosslinks that increase the stability of the particle. The first disulfide was introduced between the two copies of H2A via an H2A-N38C point mutation, effectively crosslinking the two H2A/H2B heterodimers together to stabilize the histone octamer against H2A/H2B dimer dissociation. The second crosslink was engineered between an R40C point mutation on the N-terminal tail of H3 and the NCP DNA ends by the introduction of a convertible nucleotide. This crosslink maintains the nucleosome DNA in a fixed translational setting relative to the histone octamer and prevents dilution-driven dissociation. The X-ray crystal structures of NCPs containing the disulfides in isolation and in combination were determined. Both disulfides stabilize the structure of the NCP without disturbing the overall structure. Nucleosomes containing these modifications will be advantageous for biochemical and structural studies as a consequence of their greater resistance to dissociation during high dilution in purification, elevated salt for crystallization and vitrification for cryogenic electron microscopy.

Baculovirus expression system for heterologous multiprotein complexes.

The discovery of large multiprotein complexes in cells has increased the demand for improved heterologous protein production techniques to study their molecular structure and function. Here we describe MultiBac, a simple and versatile system for generating recombinant baculovirus DNA to express protein complexes comprising many subunits. Our method uses transfer vectors containing a multiplication module that can be nested to facilitate assembly of polycistronic expression cassettes, thereby minimizing requirements for unique restriction sites. The transfer vectors access a modified baculovirus DNA through Cre-loxP site-specific recombination or Tn7 transposition. This baculovirus has improved protein expression characteristics because specific viral genes have been eliminated. Gene insertion reactions are carried out in Escherichia coli either sequentially or concurrently in a rapid, one-step procedure. Our system is useful for both recombinant multiprotein production and multigene transfer applications.

Capturing Structural Heterogeneity in Chromatin Fibers.

Chromatin fiber organization is implicated in processes such as transcription, DNA repair and chromosome segregation, but how nucleosomes interact to form higher-order structure remains poorly understood. We solved two crystal structures of tetranucleosomes with approximately 11-bp DNA linker length at 5.8 and 6.7 Å resolution. Minimal intramolecular nucleosome-nucleosome interactions result in a fiber model resembling a flat ribbon that is compatible with a two-start helical architecture, and that exposes histone and DNA surfaces to the environment. The differences in the two structures combined with electron microscopy reveal heterogeneous structural states, and we used site-specific chemical crosslinking to assess the diversity of nucleosome-nucleosome interactions through identification of structure-sensitive crosslink sites that provide a means to characterize fibers in solution. The chromatin fiber architectures observed here provide a basis for understanding heterogeneous chromatin higher-order structures as they occur in a genomic context.

Novel interactions between the components of human and yeast TFIIA/TBP/DNA complexes.

RNA polymerase II-dependent transcription requires the assembly of a multi-protein, preinitiation complex on core promoter elements. Transcription factor IID (TFIID) comprising the TATA box-binding protein (TBP) and TBP-associated factors (TAFs) is responsible for promoter recognition in this complex. Subsequent association of TFIIA and TFIIB provides enhanced complex stability. TFIIA is required for transcriptional stimulation by certain viral and cellular activators, and favors formation of the preinitiation complex in the presence of repressor NC2. The X-ray structures of human and yeast TBP/TFIIA/DNA complexes at 2.1A and 1.9A resolution, respectively, are presented here and seen to resemble each other closely. The interactions made by human TFIIA with TBP and DNA within and upstream of the TATA box, including those involving water molecules, are described and compared to the yeast structure. Of particular interest is a previously unobserved region of TFIIA that extends the binding interface with TBP in the yeast, but not in the human complex, and that further elucidates biochemical and genetic results.

Chromatin fiber folding: requirement for the histone H4 N-terminal tail.

We have developed a self-assembly system for nucleosome arrays in which recombinant, post-translationally unmodified histone proteins are combined with DNA of defined-sequence to form chromatin higher-order structure. The nucleosome arrays obtained are highly homogeneous and sediment at 53S when maximally folded in 1mM or 100mM MgCl(2). The folding properties are comparable to established systems. Analytical ultracentrifugation is used to determine the consequence of individual histone tail domain deletions on array folding. Fully compacted chromatin fibers are obtained with any one of the histone tails deleted with the exception of the H4 N terminus. The region of the H4 tail, which mediates compaction, resides in the stretch of amino acids 14-19.

Crystal structure of Escherichia coli alkanesulfonate monooxygenase SsuD.

The FMNH(2)-dependent alkanesulfonate monooxygenase SsuD catalyzes the conversion of alkanesulfonates to the corresponding aldehyde and sulfite. The enzyme allows Escherichia coli to use a wide range of alkanesulfonates as sulfur sources for growth when sulfate or cysteine are not available. The structure of SsuD was solved using the multiwavelength anomalous dispersion method from only four ordered selenium sites per asymmetric unit (one site per 20,800 Da). The final model includes 328 of 380 amino acid residues and was refined to an R-factor of 23.5% (R(free)=27.5%) at 2.3A resolution. The X-ray crystal structure of SsuD shows a homotetrameric state for the enzyme, each subunit being composed of a TIM-barrel fold enlarged by four insertion regions that contribute to intersubunit interactions. SsuD is structurally related to a bacterial luciferase and an archaeal coenzyme F(420)-dependent reductase in spite of a low level of sequence identity with these enzymes. The structural relationship is not limited to the beta-barrel region; it includes most but not all extension regions and shows distinct properties for the SsuD TIM-barrel. A likely substrate-binding site is postulated on the basis of the SsuD structure presented here, results from earlier biochemical studies, and structure relatedness to bacterial luciferase. SsuD is related to other FMNH(2)-dependent monooxygenases that show distant sequence relationship to luciferase. Thus, the structure reported here provides a model for enzymes belonging to this family and suggests that they might all fold as TIM-barrel proteins.

Solvent mediated interactions in the structure of the nucleosome core particle at 1.9 a resolution.

Solvent binding in the nucleosome core particle containing a 147 base pair, defined-sequence DNA is characterized from the X-ray crystal structure at 1.9 A resolution. A single-base-pair increase in DNA length over that used previously results in substantially improved clarity of the electron density and accuracy for the histone protein and DNA atomic coordinates. The reduced disorder has allowed for the first time extensive modeling of water molecules and ions. Over 3000 water molecules and 18 ions have been identified. Water molecules acting as hydrogen-bond bridges between protein and DNA are approximately equal in number to the direct hydrogen bonds between these components. Bridging water molecules have a dual role in promoting histone-DNA association not only by providing further stability to direct protein-DNA interactions, but also by enabling formation of many additional interactions between more distantly related elements. Water molecules residing in the minor groove play an important role in facilitating insertion of arginine side-chains. Water structure at the interface of the histones and DNA provides a means of accommodating intrinsic DNA conformational variation, thus limiting the sequence dependency of nucleosome positioning while enhancing mobility. Monovalent anions are bound near the N termini of histone alpha-helices that are not occluded by DNA phosphate groups. Their location in proximity to the DNA phosphodiester backbone suggests that they damp the electrostatic interaction between the histone proteins and the DNA. Divalent cations are bound at specific sites in the nucleosome core particle and contribute to histone-histone and histone-DNA interparticle interactions. These interactions may be relevant to nucleosome association in arrays.

MultiBac: multigene baculovirus-based eukaryotic protein complex production.

Multiprotein complexes are an emerging focus in current biology, resulting in a demand for advanced heterologous expression systems. This unit provides protocols for the expression of eukaryotic multiprotein complexes using multigene expression vectors. Homologous and site-specific recombinases facilitate their assembly. Thus, modification of individual subunits for revised expression studies is achieved with comparative ease. The strategy outlined here employs the MultiBac baculoviral expression system for multiprotein complexes as an example. Baculoviral expression does not require particular safety precautions due to the replication incompetence of baculovirus in mammalian hosts. The MultiBac system provides for improved protein production due to deletion of specific viral genes (V-cath, chiA). Most of the steps described in this unit are tailored for high-throughput approaches. The general strategy of rapidly combining encoding DNAs by recombination into multigene expression vectors for protein complex expression can also be applied to other prokaryotic or mammalian expression systems.

Protein complex expression by using multigene baculoviral vectors.

Elucidation of the molecular basis of protein-interaction networks, in particular in higher eukaryotes, is hampered by insufficient quantities of endogenous multiprotein complexes. Present recombinant expression methods often require considerable investment in both labor and materials before multiprotein expression, and after expression and biochemical analysis these methods do not provide flexibility for expressing an altered multiprotein complex. To meet these demands, we have recently introduced MultiBac, a modular baculovirus-based system specifically designed for eukaryotic multiprotein expression. Here we describe new transfer vectors and a combination of DNA recombination-based methods, which further facilitate the generation of multigene cassettes for protein coexpression (Fig. 1), thus providing a flexible platform for generation of protein expression vectors and their rapid regeneration for revised expression studies. Genes encoding components of a multiprotein complex are inserted into a suite of compatible transfer vectors by homologous recombination. These progenitor constructs are then rapidly joined in the desired combination by Cre-loxP-mediated in vitro plasmid fusion. Protocols for integration of the resulting multigene expression cassettes into the MultiBac baculoviral genome are provided that rely on Tn7 transposition and/or Cre-loxP reaction carried out in vivo in Escherichia coli cells tailored for this purpose. Detailed guidelines for multigene virus generation and amplification, cell culture maintenance and protein production are provided, together with data illustrating the simplicity and remarkable robustness of the present method for multiprotein expression using a composite MultiBac baculoviral vector.

The structure of DNA in the nucleosome core.

The 1.9-A-resolution crystal structure of the nucleosome core particle containing 147 DNA base pairs reveals the conformation of nucleosomal DNA with unprecedented accuracy. The DNA structure is remarkably different from that in oligonucleotides and non-histone protein-DNA complexes. The DNA base-pair-step geometry has, overall, twice the curvature necessary to accommodate the DNA superhelical path in the nucleosome. DNA segments bent into the minor groove are either kinked or alternately shifted. The unusual DNA conformational parameters induced by the binding of histone protein have implications for sequence-dependent protein recognition and nucleosome positioning and mobility. Comparison of the 147-base-pair structure with two 146-base-pair structures reveals alterations in DNA twist that are evidently common in bulk chromatin, and which are of probable importance for chromatin fibre formation and chromatin remodelling.