TDDFT Study of the Optical Excitation of Nucleic Acid Bases-C60 Complexes.

The potential of C60 as a nucleic acid base (NAB) optical sensor is theoretically explored. We investigate the adsorption of four NABs, namely, adenine, cytosine, guanine, and thymine, on C60 in the gas phase. For the optimal NAB@C60 adsorption configurations, obtained using a dispersion-corrected density functional, we calculate the vis-near-ultraviolet optical response using time-dependent density functional theory. While the isolated C60 and NAB molecules do not exhibit visible optical excitation, we find that C60/NAB conjugation gives rise to distinct spectral features in the visible range. These results suggest that C60 conjugation can be applied for photodetection of individual NABs.

Intrinsic Ferromagnetism in the Diluted Magnetic Semiconductor Co:TiO_{2}.

Here we present a study of magnetism in Co_{0.05}Ti_{0.95}O_{2-δ} anatase films grown by pulsed laser deposition under a variety of oxygen partial pressures and deposition rates. Energy-dispersive spectrometry and transmission electron microscopy analyses indicate that a high deposition rate leads to a homogeneous microstructure, while a very low rate or postannealing results in cobalt clustering. Depth resolved low-energy muon spin rotation experiments show that films grown at a low oxygen partial pressure (≈10^{-6} torr) with a uniform structure are fully magnetic, indicating intrinsic ferromagnetism. First principles calculations identify the beneficial role of low oxygen partial pressure in the realization of uniform carrier-mediated ferromagnetism. This work demonstrates that Co:TiO_{2} is an intrinsic diluted magnetic semiconductor.

Endohedral metallofullerenes, M@C60 (M = Ca, Na, Sr): selective adsorption and sensing of open-shell NOx gases.

Based on density-functional theory and non-equilibrium Green's function calculations, we demonstrate that endohedral metallofullerenes (EMFs) are reactive to open-shell gases, and therefore have the potential application as selective open-shell gas sensors. The adsorption of eight gas species (CO, H2O, H2S, NO2, NO, SO2, O2 and NH3) on three EMFs (M@C60, M = Ca, Na and Sr) shows that the adsorption energies of the EMFs towards NO2 and NO are significantly higher than the closed-shell species. Moreover, the high selectivity appears relatively insensitive to the inserted metal atoms. The calculated current-voltage characteristics of gold-M@C60-gold structures (M = Ca, Na) show that the adsorption of NO2 leads to significant change in conductivity, suggesting a potential application as an EMF gas resistive sensing device.

Large spin-filtering effect in Ti-doped defective zigzag graphene nanoribbon.

Through first-principles calculations using the nonequilibrium Green's function formalism together with density functional theory, we study the conductance of double-vacancy zigzag graphene nanoribbons doped with four transition metal atoms Ti, V, Cr and Fe. We show that Ti doping induces large spin-filtering with an efficiency in excess of 90% for bias voltages below 0.5 V, while the other metal adatoms do not induce large spin filtering. This is despite the fact that the Ti dopant possesses small spin moment, while large moments reside on V, Cr and Fe dopants. Our analysis shows that the suppression of transmission in the spin-down channel in the Ti-doped graphene nanoribbon, thus the large spin filtering efficiency, is due to transmission anti-resonance arising from destructive quantum interference. These findings suggest that the decoration of graphene with titanium, and possibly other transition metals, can act as effective spin filters for nanospintronic applications.

Communication: Electrical rectification of C59N: The role of anchoring and doping sites.

Based on the nonequilibrium Green's function formalism and density-functional theory, we investigate the onset of electrical rectification in a single C59N molecule in conjunction with gold electrodes. Our calculations reveal that rectification is dependent upon the anchoring of the Au atom on C59N; when the Au electrode is singly bonded to a C atom (labeled here as A), the system does not exhibit rectification, whereas when the electrode is connected to the C-C bridge site between two hexagonal rings (labeled here as B), transmission asymmetry is observed, where the rectification ratio reaches up to 2.62 at ±1 V depending on the N doping site relative to the anchoring site. Our analysis of the transmission mechanism shows that N doping of the B configuration causes rectification because more transmission channels are available for transmission in the B configuration than in the A configuration.

Bistable Magnetism and Potential for Voltage-Induced Spin Crossover in Dilute Magnetic Ferroelectrics.

A first-principles investigation into the magnetic ferroelectric PbTi(1-x)Co(x)O(3) has revealed a bi-stable magnetic system with strong spin-lattice coupling. The local distortions induced by the low-spin to high-spin crossover are ferroelectric in nature, and are characterized by the displacement of the dopant ion with respect to the surrounding O(6) octahedral cage. We demonstrate how this spin-lattice effect could mediate magnetoelectric coupling and possible electric field induced spin-crossover, indicating a promising route to voltage manipulation of isolated spins in a solid-state system.

Sensing sulfur-containing gases using titanium and tin decorated zigzag graphene nanoribbons from first-principles.

Atom implantation in graphene or graphene nanoribbons offers a rich opportunity to tune the material structure and functional properties. In this study, zigzag graphene nanoribbons with Ti or Sn adatoms stabilised on a double carbon vacancy site are theoretically studied to investigate their sensitivity to sulfur-containing gases (H2S and SO2). Due to the abundance of oxygen in the atmosphere, we also consider the sensitivity of the structures in the presence of oxygen. Density functional theory calculations are performed to determine the adsorption geometry and energetics, and nonequilibrium Green's function method is employed to compute the current-voltage characteristics of the considered systems. Our results demonstrate the sensitivity of both Ti- and Sn-doped systems to H2S, and the mild sensitivity of Ti-doped sensor systems to SO2. The Ti-doped sensor structure exhibits sensitivity to H2S with or without oxidation, while oxidation of the Sn-doped sensor structure reduces its ability to adsorb H2S and SO2 molecules. Interestingly, oxygen dissociates on the Ti-doped sensor structure, but it does not affect the sensor's response to the H2S gas species. Oxidation prevents the dissociation of the H-S bond when H2S adsorbs on the Ti-doped structure, thus enhancing its reusability for this gas species. Our study suggests the potential of Ti- and Sn-doped graphene in selective gas sensing, irrespective of the sensing performance of the bulk oxides.

Density-functional prediction of a surface magnetic phase in SrTiO(3)/LaAlO(3) heterostructures induced by Al vacancies.

Based on first-principles density functional calculations we propose a novel Al vacancy induced ferromagnetism occurring at the LaAlO(3) surface of SrTiO(3)/LaAlO(3) bilayers. Magnetism at cation vacancies away from the surface is quenched due to charge compensation. Magnetic surface Al vacancies are stabilized due to the built-in electric field inside the LaAlO(3) region that raises the energy of the defect level, making charge compensation unfavorable. Surface Al vacancies prefer to form clusters and exhibit two-dimensional ferromagnetic alignment mediated by a long-range magnetic interaction. These results are discussed in light of recent experimental observations.

Microscopy and microanalysis of complex nanosized strengthening precipitates in new generation commercial Al-Cu-Li alloys.

Precipitates (ppts) in new generation aluminum-lithium alloys (AA2099 and AA2199) were characterised using scanning and transmission electron microscopy and atom probe tomography. Results obtained on the following ppts are reported: Guinier-Preston zones, T1 (Al2 CuLi), ß' (Al3 Zr) and δ' (Al3 Li). The focus was placed on their composition and the presence of minor elements. X-ray energy-dispersive spectrometry in the electron microscopes and mass spectrometry in the atom probe microscope showed that T1 ppts were enriched in zinc (Zn) and magnesium up to about 1.9 and 3.5 at.%, respectively. A concentration of 2.5 at.% Zn in the δ' ppts was also measured. Unlike Li and copper, Zn in the T1 ppts could not be detected using electron energy-loss spectroscopy in the transmission electron microscope because of its too low concentration and the small sizes of these ppts. Indeed, Monte Carlo simulations of EEL spectra for the Zn L2,3 edge showed that the signal-to-noise ratio was not high enough and that the detection limit was at least 2.5 at.%, depending on the probe current. Also, the simulation of X-ray spectra confirmed that the detection limit was exceeded for the Zn Kα X-ray line because the signal-to-noise ratio was high enough in that case, which is in agreement with our observations.

Graphene based dots and antidots: a comparative study from first principles.

Graphene based quantum dots and antidots are two nanostructures of primary importance for their fundamental physics and technological applications, particularly in the emerging field of graphene-based nanoelectronics and nanospintronics. Herein, based on first principles density functional theory calculations, we report a comparative study on the electronic structure of these two structurally complementary entities, where the bandgap opening, edge magnetism and the role of hydrogenation are investigated. Our results show the diversity of electronic structures of various dots and antidots, whose properties are sensitive to the edge detailed geometry (including size and shape and edge type). Hydrogen passivation plays an essential roal in affecting the related properties, in particular, it leads to larger bandgap values and suppress the edge magnetism. The frontier orbital analysis is employed to rationalize and compare the complicated nature of dots and antidots. Based on the specific geometrical consideration and the total energy competition of the ground antiferromagnetic and the ferromagnetic states, some magnetic structures (the unpassivated 42-atom-antidot and 54-atom-dot) are proposed to be useful as magnetic switches.

Revealing latent pole and zone line information in atom probe detector maps using crystallographically correlated metrics.

Poles and zone lines observed within atom probe field evaporation images are useful for a range of atom probe crystallography studies, including calibration of the reconstruction and crystallographic characterisation of microstructural features such as grain boundaries. However, this information is not always readily apparent. Techniques for plotting crystallographically correlated metrics contained within atom probe data to enhance pole and zone line contrast across the detector space are developed. This includes consideration of the electric field, molecular ions, lattice structure retained within the reconstruction, specific elemental species, the number of pulses between detection events, and the lateral distance between sequential detection events. These approaches are then applied to experimental atom probe tomography datasets on technically pure Al, nanocrystalline Al, highly doped Si, and additively manufactured Inconel 738, Haynes 282, and Ti-6Al-4V. The results facilitate the extension of atom probe crystallography studies to a broader range of crystalline datasets where crystallographic information is not readily apparent from existing methods, as well as a deeper understanding of field evaporation behaviour during an atom probe experiment.

Direct observation of local potassium variation and its correlation to electronic inhomogeneity in (Ba(1-x)K(x))Fe2As2 pnictide.

Local fluctuations in the distribution of dopant atoms are thought to cause the nanoscale electronic disorder or phase separation in pnictide superconductors. Atom probe tomography has enabled the first direct observations of dopant species clustering in a K-doped 122-phase pnictide. First-principles calculations suggest the coexistence of static magnetism and superconductivity on a lattice parameter length scale over a wide range of dopant concentrations. Our results provide evidence for a mixed scenario of phase coexistence and phase separation, depending on local dopant atom distributions.

Atom probe trajectory mapping using experimental tip shape measurements.

Atom probe tomography is an accurate analytical and imaging technique which can reconstruct the complex structure and composition of a specimen in three dimensions. Despite providing locally high spatial resolution, atom probe tomography suffers from global distortions due to a complex projection function between the specimen and detector which is different for each experiment and can change during a single run. To aid characterization of this projection function, this work demonstrates a method for the reverse projection of ions from an arbitrary projection surface in 3D space back to an atom probe tomography specimen surface. Experimental data from transmission electron microscopy tilt tomography are combined with point cloud surface reconstruction algorithms and finite element modelling to generate a mapping back to the original tip surface in a physically and experimentally motivated manner. As a case study, aluminium tips are imaged using transmission electron microscopy before and after atom probe tomography, and the specimen profiles used as input in surface reconstruction methods. This reconstruction method is a general procedure that can be used to generate mappings between a selected surface and a known tip shape using numerical solutions to the electrostatic equation, with quantitative solutions to the projection problem readily achievable in tens of minutes on a contemporary workstation.

Room-temperature ferromagnetism and the scaling relation between magnetization and average granule size in nanocrystalline Zn/ZnO core-shell structures prepared by sputtering.

Ferromagnetism is found in nanocrystalline Zn/ZnO core-shell structures prepared by sputtering pure Zn with subsequent oxidation. The saturation magnetization (M(S)) of the passivated ZnO shells increases with decrease in average particle size (d). The Curie temperature of the samples is above 400 degrees C. It is found that the ferromagnetism has a close relationship with point defects in ZnO shells. The maximum magnetization is estimated to be 28 emu cm(-3) (i.e. 0.14 mu(B) per unit cell) at 300 K, which is over three orders of magnitude larger than that of undoped ZnO nanoparticles or nanorods (10(-3)-10(-2) emu cm(-3)). More importantly, there is a scaling relation of M(s) alpha 1/d(n) (n = 5.20 +/- 0.20) for samples with d

Effect of laser pulsing on the composition measurement of an Al-Mg-Si-Cu alloy using three-dimensional atom probe.

The effect of laser pulse energy on the composition measurement of an Al-Mg-Si-Cu alloy (AA6111) specimen has been investigated over a base temperature range of 20-80K and a voltage range of 2.5-5kV. Laser pulse energy must be sufficiently higher to achieve pulse-controlled field evaporation, which is at least 0.9nJ with a beam spot size of about 5microm, providing an equivalent voltage pulse fraction, approximately 14% at 80K for the alloy specimen. In contrast to the cluster composition, the measured specimen composition is sensitive to base temperature and laser energy changes. The exchange charge state under the influence of laser pulsing makes the detection of Si better at low base temperature, but detection of Cr and Mn is better at a higher temperature and using higher laser energy. No such effect occurs for detection of Mg and Cu under laser pulsing, although Mg concentration is sensitive to the analysis temperature under voltage pulsing. Mass resolution at full-width half-maximum is sensitive to local taper angle near the apex, but has little effect on composition measurement.

Non-destructive analysis on nano-textured surface of the vertical LED for light enhancement.

In this work, the nano-textured surface of a GaN-based vertical light emitting diode (VLED) is characterized using a unified framework of non-destructive techniques (NDT) incorporating scanning electron microscopy (SEM), atomic force microscopy (AFM), Raman spectroscopy, Photoluminescence (PL), and X-ray diffraction (XRD) to optimize the light output efficiency. The surface roughness of ∼300 nm is revealed by AFM. Compressive stress-state of 0.667 GPa in the GaN surface is indicated by the E2(high) and A1(LO) phonon peak values at 569 cm-1 and 736 cm-1, respectively, in Raman spectrum and the wavelength at 442 nm rather 450 nm in PL spectrum. Without damaging the LED, surface analysis by NDT helps to advance the understanding of the optimized angular light redistribution subject to the high-roughness surface and the negative impacts of the stress induced at the top GaN layer, which leads to the optical efficiency degradation of the VLED. Furthermore, the impact of texturing on underneath n-GaN and MQWs layers is investigated via SEM-based transmission Kikuchi diffraction (TKD) and aberration-corrected scanning transmission electron microscopy (AC-STEM) and revealed a smooth surface morphology and good crystalline quality, indicating that the etch-induced damage by texture engineering does not impair the active region of the VLED. Accordingly, prospective optimizations are suggested in the context of surface engineering for light enhancement in VLEDs.

Correlative study of lattice imperfections in long-range ordered, nano-scale domains in a Fe-Co-Mo alloy.

Recent advancements in data mining methods in atom probe microscopy have enabled new quantitative chemical and microstructural characterization beyond the standard three-dimensional reconstruction. For example, spatial distribution maps have been developed to enable visualisation of the local lattice occupation of a selected region of interest. However, the precision of such studies yet remains unknown as correlation with complementary methods would be required. Therefore, a correlative study of atom probe microscopy, neutron diffraction and microstructural modelling of long-range ordered, nano-scale domains in a well-researched Fe-Co-Mo Maraging-type steel is presented here. Its microstructure consists of Mo-enriched µ-phase (Fe,Co)7Mo6 particles embedded into a body-centred cubic FeCo matrix. Previous research has shown that under slow cooling conditions, this matrix partially decomposes into nano-scale B2 long-range ordered domains surrounded by disordered regions, resulting in reduced toughness in potential cutting applications. Usually, a long-range order parameter S referring to ideal B2 long-range order is assumed within such domains according to neutron diffraction. However, atom probe microscopy and modelling results presented in the current study indicate lattice imperfections with a partial substitution of atoms on the Fe- and Co-sublattices. After considering preferential retention effects during the atom probe experiment, a model unit cell is presented to define the observed imperfect B2 long-range order as pseudo-D03 long-range order, and the potential impact on the materials properties is discussed.

Atom probe specimen fabrication methods using a dual FIB/SEM.

A dual FIB/SEM provides solutions to many challenges in atom probe specimen preparation. When combined with an in situ lift-out capability, the versatility of this tool allows almost any region of interest, in almost any geometry, to be placed at the apex of a specimen tip. Several preparation techniques have been developed in response to specific application requirements; for example, in cases where materials are not suitable for electropolishing, or where site-specific analysis is required. Two general techniques, with wide-ranging potential applications, are described in detail here. The first is a 'cut-out' technique that provides a relatively quick means of micro-tip specimen preparation from bulk material samples. The second method is a 'lift-out' technique that can be used in an in situ or ex situ mode and does not require the preparation of pre-sharpened mounting points.

Near-Perfect Spin Filtering and Negative Differential Resistance in an Fe(II)S Complex.

Density functional theory and nonequilibrium Green's function calculations have been used to explore spin-resolved transport through the high-spin state of an iron(II)sulfur single molecular magnet. Our results show that this molecule exhibits near-perfect spin filtering, where the spin-filtering efficiency is above 99%, as well as significant negative differential resistance centered at a low bias voltage. The rise in the spin-up conductivity up to the bias voltage of 0.4 V is dominated by a conductive lowest unoccupied molecular orbital, and this is accompanied by a slight increase in the magnetic moment of the Fe atom. The subsequent drop in the spin-up conductivity is because the conductive channel moves to the highest occupied molecular orbital, which has a lower conductance contribution. This is accompanied by a drop in the magnetic moment of the Fe atom. These two exceptional properties, and the fact that the onset of negative differential resistance occurs at low bias voltage, suggests the potential of the molecule in nanoelectronic and nanospintronic applications.

Enhanced oscillatory rectification and negative differential resistance in pentamantane diamondoid-cumulene systems.

We propose a new functionality for diamondoids in nanoelectronics. Based on the nonequilibrium Green's function formalism and density functional theory, we reveal that when attached to gold electrodes, the pentamantane-cumulene molecular junction exhibits large and oscillatory rectification and negative differential resistance (NDR) - depending on the number of carbon atoms in cumulene (Cn). When n is odd rectification is greatly enhanced where the rectification ratio can reach ∼180 and a large negative differential resistance peak current of ∼3 µA. This oscillatory behavior is well rationalised in terms of the occupancy of the carbon 2p states in Cn. Interestingly, different layers of C atoms in the pentamantane molecule have different contributions to transmission. The first and third layers of C atoms in pentamantane have a slight contribution to rectification, and the fifth and sixth layers have a stronger contribution to both rectification and NDR. Thus, our results suggest potential avenues for controlling their functions by chemically manipulating various parts of the diamondoid molecule, thus extending the applications of diamondoids in nanoscale integrated circuits.