On the Structure, Stability, and Cell Uptake of Nanostructured Lipid Carriers for Drug Delivery.

The efficacy of nanostructured lipid carriers (NLC) for drug delivery strongly depends on their stability and cell uptake. Both properties are governed by their compositions and internal structure. To test the effect of the lipid composition of NLC on cell uptake and stability, three kinds of liquid lipids with different degrees of unsaturation are employed. After ensuring homogeneous size distributions, the thermodynamic characteristics, stability, and mixing properties of NLC are characterized. Then the rates and predominant pathways of cell uptake are determined. Although the same surfactant is used in all cases, different uptake rates are observed. This finding contradicts the view that the surface properties of NLC are dominated by the surfactant. Instead, the uptake rates are explained by the structure of the nanocarrier. Depending on the mixing properties, some liquid lipids remain inside the nanocarrier, while other liquid lipids are present on the surface. Nanocarriers with liquid lipids on the surface are taken up more readily by the cells. This shows that the engineering of efficient lipid nanocarriers requires a delicate balance of interactions between all components of the nanocarrier on the molecular level.

Exploring the anti-inflammatory potential of topical hyaluronic acid for vocal fold injury in a rat model.

PURPOSE: Vocal fold injuries are associated with fibrosis and dysphonia, which is a major obstacle to surgical treatment. The aim of this study is to evaluate the effect of topical hyaluronic acid with or without diclofenac on the inflammatory phase of vocal fold wound healing. METHODS: Forty-one male Sprague-Dawley rats were randomly assigned to four groups: an uninjured control group, an injured control group without any treatment, and two intervention groups in which hyaluronic acid with or without diclofenac was applied to the injured vocal fold. Gene expression of inflammatory markers and ECM-related molecules were examined. RESULTS: Vocal fold injury resulted in a significant upregulation of inflammatory parameters [Ptgs2, Il1b and Il10] and Has1. Tgfb1, Has3 and Eln gene expression were significantly downregulated by the topical application of hyaluronic acid. The combination of hyaluronic acid and diclofenac did not result in any significant changes. CONCLUSIONS: Vocal fold wound healing was significantly improved by a single post-operative topical application of hyaluronic acid. The addition of diclofenac may provide no additional benefit.

Development and Characterization of an In Vitro Intestinal Model Including Extracellular Matrix and Macrovascular Endothelium.

In vitro intestinal models are used to study biological processes, drug and food absorption, or cytotoxicity, minimizing the use of animals in the laboratory. They usually consist of enterocytes and mucus-producing cells cultured for 3 weeks, e.g., on Transwells, to obtain a fully differentiated cell layer simulating the human epithelium. Other important components are the extracellular matrix (ECM) and strong vascularization. The former serves as structural support for cells and promotes cellular processes such as differentiation, migration, and growth. The latter includes endothelial cells, which coordinate vascularization and immune cell migration and facilitate the transport of ingested substances or drugs to the liver. In most cases, animal-derived hydrogels such as Matrigel or collagen are used as ECM in in vitro intestinal models, and endothelial cells are only partially considered, if at all. However, it is well-known that animal-derived products can lead to altered cell behavior and incorrect results. To circumvent these limitations, synthetic and modifiable hydrogels (Peptigel and Vitrogel) were studied here to mimic xenofree ECM, and the data were compared with Matrigel. Careful rheological characterization was performed, and the effect on cell proliferation was investigated. The results showed that Vitrogel exhibited shear-thinning behavior with an internal structure recovery of 78.9 ± 11.2%, providing the best properties among the gels investigated. Therefore, a coculture of Caco-2 and HT29-MTX cells (ratio 7:3) was grown on Vitrogel, while simultaneously endothelial cells were cultured on the basolateral side by inverse cultivation. The model was characterized in terms of cell proliferation, differentiation, and drug permeability. It was found that the cells cultured on Vitrogel induced a 1.7-fold increase in cell proliferation and facilitated the formation of microvilli and tight junctions after 2 weeks of cultivation. At the same time, the coculture showed full differentiation indicated by high alkaline phosphatase release of Caco-2 cells (95.0 ± 15.9%) and a mucus layer produced by HT29-MTX cells. Drug tests led to ex vivo comparable permeability coefficients (Papp) (i.e., Papp; antipyrine = (33.64 ± 5.13) × 10-6 cm/s, Papp; atenolol = (0.59 ± 0.16) × 10-6 cm/s). These results indicate that the newly developed intestinal model can be used for rapid and efficient assessment of drug permeability, excluding unexpected results due to animal-derived materials.

In Vitro and In Vivo Evaluation of Carbopol 71G NF-Based Mucoadhesive Minitablets as a Gastroretentive Dosage Form.

Gastroretentive dosage forms are intended to stay inside the stomach for a long period of time while releasing an active pharmaceutical ingredient. Such systems may offer significant benefits for numerous drugs compared to other sustained release systems, such as improved pharmacokinetics/bioavailability and reduced intake frequency and thereby improved adherence to the medical therapy. However, there is no gastroretentive product on the market with proven reliable gastroretentive properties in humans. A major obstacle is the motility pattern of the stomach in the fasting state in humans, which reliably ensures gastric emptying of even large indigestible objects into the small intestine. One promising approach to avoid gastric emptying is adhesion of the drug delivery system to the gastric mucosa. In order to achieve mucoadhesive properties, minitablets containing Carbopol 71G NF were developed and compared to minitablets without adhesive properties. In a specialized mucoadhesive test system, the adhesion time was prolonged for adhesive minitablets (240 min) compared to non-adhesive minitablets (30 min). The in vivo transit behavior was investigated using magnetic resonance imaging in 11 healthy volunteers in fasted state in a crossover setup. It was found that the gastric residence time (GRT) of the adhesive minitablets (median of 37.5 min with IQR = 22.5-52.5) was statistically significantly prolonged compared to the non-adhesive minitablets (median of 7.5 with IQR = 7.5-22.5), indicating a delay in gastric emptying by adhesion to the gastric mucosa. However, the system needs further improvement to create a clinical benefit. Furthermore, it was observed that for 9 of 22 administrations (three minitablets were given simultaneously with every administration), the minitablets were not emptied together but showed different GRTs.

Development of a Workflow to Engineer Tailored Microparticles Via Inkjet Printing.

PURPOSE: New drug development and delivery approaches result in an ever-increasing demand for tailored microparticles with defined sizes and structures. Inkjet printing technologies could be promising new processes to engineer particles with defined characteristics, as they are created to precisely deliver liquid droplets with high uniformity. METHODS: D-mannitol was used as a model compound alone or co-processed with the pore former agent ammonium bicarbonate, and the polymer polyethylene glycol 200. Firstly, a drop shape analyzer was used to characterize and understand ink/substrate interactions, evaporation, and solidification kinetics. Consequently, the process was transferred to a laboratory-scale inkjet printer and the resulting particles collected, characterized and compared to others obtained via an industrial standard technique. RESULTS: The droplet shape analysis allowed to understand how 3D structures are formed and helped define the formulation and process parameters for inkjet printing. By adjusting the drop number and process waveform, spherical particles with a mean size of approximately 100 µm were obtained. The addition of pore former and polymer allowed to tailor the crystallization kinetics, resulting in particles with a different surface (i.e., spike-like surface) and bulk (e.g. porous and non-porous) structure. CONCLUSION: The workflow described enabled the production of 3D structures via inkjet printing, demonstrating that this technique can be a promising approach to engineer microparticles.

The Role of Local Inflammation and Hypoxia in the Formation of Hypertrophic Scars-A New Model in the Duroc Pig.

Hypertrophic scars continue to be a major burden, especially after burns. Persistent inflammation during wound healing appears to be the precipitating aspect in pathologic scarring. The lack of a standardized model hinders research from fully elucidating pathophysiology and therapy, as most therapeutic approaches have sparse evidence. The goal of this project was to investigate the mechanisms of scar formation after prolonged wound inflammation and to introduce a method for generating standardized hypertrophic scars by inducing prolonged inflammation. Four wound types were created in Duroc pigs: full-thickness wounds, burn wounds, and both of them with induced hyperinflammation by resiquimod. Clinical assessment (Vancouver Scar Scale), tissue oxygenation by hyperspectral imaging, histologic assessment, and gene expression analysis were performed at various time points during the following five months. Native burn wounds as well as resiquimod-induced full-thickness and burn wounds resulted in more hypertrophic scars than full-thickness wounds. The scar scale showed significantly higher scores in burn- and resiquimod-induced wounds compared with full-thickness wounds as of day 77. These three wound types also showed relative hypoxia compared with uninduced full-thickness wounds in hyperspectral imaging and increased expression of HIF1a levels. The highest number of inflammatory cells was detected in resiquimod-induced full-thickness wounds with histologic features of hypertrophic scars in burn and resiquimod-induced wounds. Gene expression analysis revealed increased inflammation with only moderately altered fibrosis markers. We successfully created hypertrophic scars in the Duroc pig by using different wound etiologies. Inflammation caused by burns or resiquimod induction led to scars similar to human hypertrophic scars. This model may allow for the further investigation of the exact mechanisms of pathological scars, the role of hypoxia and inflammation, and the testing of therapeutic approaches.

Plasma proteins facilitates placental transfer of polystyrene particles.

BACKGROUND: Nanoparticles, which are exposed to biological fluids are rapidly interacting with proteins and other biomolecules forming a corona. In addition to dimension, charge and material the distinct protein corona influences the interplay of nanoparticles with tissue barriers. In this study we were focused on the impact of in situ formed human plasma protein corona on the transfer of 80 nm polystyrene nanoparticles (PS-particles) across the human placenta. To study materno-to fetal PS transfer we used the human ex vivo placental perfusion approach, which represents an intact and physiological tissue barrier. To analyze the protein corona of PS particles we performed shotgun proteomics of isolated nanoparticles before and after tissue exposure. RESULTS: Human plasma incubated with PS-particles of 80 nm and subsequent formed protein corona enhanced the transfer across the human placenta compared to PS-corona formed by bovine serum albumin and dextran which served as a control. Quantitative and qualitative changes of plasma proteins determined the changes in PS transfer across the barrier. Based on the analysis of the PS-proteome two candidate proteins, namely human albumin and immunoglobulin G were tested if these proteins may account for the enhanced PS-transfer across the placenta. Interestingly, the protein corona formed by human albumin significantly induced the transfer of PS-particles across the tissue compared to the formed IgG-corona. CONCLUSION: In total we demonstrate the PS corona dynamically and significantly evolves upon crossing the human placenta. Thus, the initial composition of PS particles in the maternal circulation is not predictive for their transfer characteristics and performance once beyond the barrier of the placenta. The precise mechanism of these effects remains to be elucidated but highlights the importance of using well designed biological models when testing nanoparticles for biomedical applications.

Assessment of Dry Powder Inhaler Carrier Targeted Design: A Comparative Case Study of Diverse Anomeric Compositions and Physical Properties of Lactose.

The pulmonary administration landscape has rapidly advanced in recent years. Targeted design of particles by spray-drying for dry powder inhaler development offers an invaluable tool for engineering of new carriers. In this work, different formulation and process aspects of spray-drying were exploited to produce new lactose carriers. Using an integrated approach, lactose was spray-dried in the presence of polyethylene glycol 200 (PEG 200), and the in vitro performance of the resulting particles was compared with other grades of lactose with varying anomeric compositions and/or physical properties. The anomeric composition of lactose in lactose-PEG 200 feed solutions of variable compositions was analyzed via polarimetry at different temperatures. These results were correlated with the solid-state and anomeric composition of the resulting spray-dried particles using modulated differential scanning calorimetry and wide-angle X-ray scattering. The distinct selected grades of lactose were characterized in terms of their micromeritic properties using laser diffraction, helium pycnometry, and gas adsorption, and their particle surface morphologies were evaluated via scanning electron microscopy. Adhesive mixtures of the different lactose carriers with inhalable-sized salbutamol sulfate, as a model drug, were prepared in low doses and evaluated for their blend homogeneity and aerodynamic performance using a Next Generation Impactor. Characterization of the spray-dried particles revealed that predominantly crystalline (in an anomeric ratio 0.8:1 of α to ß) spherical particles with a mean size of 50.9 ± 0.4 µm could be produced. Finally, it was apparent that micromeritic, in particular, the shape, and surface properties (inherent to solid-state and anomeric composition) of carrier particles dominantly control DPI delivery. This provided an insight into the relatively inferior performance of the adhesive blends containing the spherical spray-dried lactose-PEG 200 composites.

The effect of saliva on the fate of nanoparticles.

OBJECTIVES: The design of nanocarriers for local drug administration to the lining mucosa requires a sound knowledge of how nanoparticles (NPs) interact with saliva. This contact determines whether NPs agglomerate and become immobile due to size- and interaction-filtering effects or adsorb on the cell surface and are internalized by epithelial cells. The aim of this study was to examine the behavior of NPs in saliva considering physicochemical NP properties. MATERIALS AND METHODS: The salivary pore-size distribution was determined, and the viscosity of the fluid inside of the pores was studied with optical tweezers. Distinct functionalized NPs (20 and 200 nm) were dispersed in saliva and salivary buffers and characterized, and surface-bound MUC5B and MUC7 were analyzed by 1D electrophoresis and immunoblotting. NP mobility was recorded, and cellular uptake studies were performed with TR146 cells. RESULTS: The mode diameter of the salivary mesh pores is 0.7 µm with a peak width of 1.9 µm, and pores are filled with a low-viscosity fluid. The physicochemical properties of the NPs affected the colloidal stability and mobility: compared with non-functionalized particles, which did not agglomerate and showed a cellular uptake rate of 2.8%, functionalized particles were immobilized, which was correlated with agglomeration and increased binding to mucins. CONCLUSION: The present study showed that the salivary microstructure facilitates NP adsorption. However, NP size and surface functionalization determine the colloidal stability and cellular interactions. CLINICAL RELEVANCE: The sound knowledge of NP interactions with saliva enables the improvement of current treatment strategies for inflammatory oral diseases.

Establishment of a Molding Procedure to Facilitate Formulation Development for Co-extrudates.

Co-extrusion offers a number of advantages over conventional manufacturing techniques. However, the setup of a co-extrusion line is cost- and time-intense and formulation development is challenging. This work introduces a novel procedure to test the applicability of a co-extruded reservoir-type system at an early product development stage. We propose vacuum compression molding (VCM), a fast procedure that requires only small material amounts, for the manufacturing of cylindrical reservoir-type system. To this end, the commercially available co-extruded product NuvaRing® and variations thereof were used as test systems. All VCM systems showed a homogeneous skin thickness that adhered well to the core, thereby providing a precise core/skin interface. As drug release is a key criterion for pharmaceutical products, a modified in vitro dissolution method was set up to test the VCM systems. The drug release from the VCM systems was in the same order of magnitude as the corresponding co-extruded strands and followed the same release kinetics. Moreover, the VCM systems were capable of indicating the relative effect of formulation-related modifications on drug release. Overall, this shows that this system is a powerful tool that facilitates formulation tailoring and co-extrusion process setup at the earliest stage.

Oral uptake of nanoparticles: human relevance and the role of in vitro systems.

Nanoparticles (NPs) present in environment, consumer and health products, food and medical applications lead to a high degree of human exposure and concerns about potential adverse effects on human health. For the general population, the exposure through contact with the skin, inhalation and oral uptake are most relevant. Since in vivo testing is only partly able to study the effects of human oral exposure, physiologically relevant in vitro systems are being developed. This review compared the three routes taking into account the estimated concentration, size of the exposed area, morphology of the involved barrier and translocation rate. The high amounts of NPs in food, the large absorption area and the relatively high translocation rate identified oral uptake as most important portal of entry for NPs into the body. Changes of NP properties in the physiological fluids, mechanisms to cross mucus and epithelial barrier, and important issues in the use of laboratory animals for oral exposure are mentioned. The ability of in vitro models to address the varying conditions along the oro-gastrointestinal tract is discussed, and requirements for physiologically relevant in vitro testing of orally ingested NPs are listed.

Development of an Abuse- and Alcohol-Resistant Formulation Based on Hot-Melt Extrusion and Film Coating.

This study focused on the development of flexible (i.e., deformable) multiple-unit pellets that feature (i) a prolonged drug release, (ii) drug abuse deterrence, and (iii) a minimal risk of alcohol-induced dose dumping (ADD). Deformable pellets were prepared via an advanced continuous one-step hot-melt extrusion (HME) technique, with the drug (i.e., antipyrine and codeine phosphate) fed as an aqueous solution into the molten matrix material (i.e., cornstarch, gum arabic, and xanthan). Formulations that had suitable mechanical characteristics (i.e., high compression strength) were coated with a flexible Aquacoat(®) ARC film to ensure prolonged release and to avoid ADD. The pellets were characterized in terms of their mechanical properties and in vitro drug release behavior in alcoholic media. All formulations were abuse deterrent: they had a high compression strength and grinding the pellets into powder was impossible. Since the pellets comprising gum arabic and xanthan as a matrix did not remain intact during dissolution testing, they had a very fast drug release rate. Cornstarch-based pellets that swelled but remained intact in the dissolution media had a slower drug release. Coated cornstarch-based pellets had a prolonged release over 8 h and resistance to dose dumping in 20 and 40% ethanol. Our results indicate that cornstarch-based pellets manufactured via the advanced HME process followed by coating are a promising formulation that makes tampering difficult due to a high compression strength combined with robustness in alcoholic media.

Intracellular calcium levels as screening tool for nanoparticle toxicity.

The use of engineered nano-sized materials led to revolutionary developments in many industrial applications and in the medical field. These materials, however, also may cause cytotoxicity. In addition to size, surface properties and shape were identified as relevant parameters for cell damage. Cell damage may occur as disruption of membrane integrity, induction of apoptosis and by organelle damage. Generation of oxidative stress may serve as an indicator for cytotoxicity. Effects occurring upon short contact of particles with cells, for instance in the systemic blood circulation, could be identified according to increases of intracellular [Ca(2+) ] levels, which are caused by variety of toxic stimuli. Negatively charged, neutral and positively charged polystyrene particles of different sizes were used to study the role of size and surface properties on viability, membrane disruption, apoptosis, lysosome function, intracellular [Ca(2+) ] levels and generation of oxidative stress. Silica particles served to test this hypothesis. Twenty nm polystyrene particles as well as 12 nm and 40 nm silica particles caused membrane damage and apoptosis with no preference of the surface charge. Only 20 nm plain and amine functionalized polystyrene particles cause oxidative stress and only the plain particles lysosomal damage. A potential role of surface charge was identified for 200 nm polystyrene particles, where only the amidine particles caused lysosomal damage. Increases in intracellular [Ca(2+) ] levels and cytotoxicity after 24 h was often linked but determination of intracellular [Ca(2+) ] levels could serve to characterize further the type of membrane damage.

Use of whole genome expression analysis in the toxicity screening of nanoparticles.

The use of nanoparticles (NPs) offers exciting new options in technical and medical applications provided they do not cause adverse cellular effects. Cellular effects of NPs depend on particle parameters and exposure conditions. In this study, whole genome expression arrays were employed to identify the influence of particle size, cytotoxicity, protein coating, and surface functionalization of polystyrene particles as model particles and for short carbon nanotubes (CNTs) as particles with potential interest in medical treatment. Another aim of the study was to find out whether screening by microarray would identify other or additional targets than commonly used cell-based assays for NP action. Whole genome expression analysis and assays for cell viability, interleukin secretion, oxidative stress, and apoptosis were employed. Similar to conventional assays, microarray data identified inflammation, oxidative stress, and apoptosis as affected by NP treatment. Application of lower particle doses and presence of protein decreased the total number of regulated genes but did not markedly influence the top regulated genes. Cellular effects of CNTs were small; only carboxyl-functionalized single-walled CNTs caused appreciable regulation of genes. It can be concluded that regulated functions correlated well with results in cell-based assays. Presence of protein mitigated cytotoxicity but did not cause a different pattern of regulated processes.

Particular film formation of phenytoin at silica surfaces.

Given the increasing number of poorly soluble and thus poorly bioavailable active pharmaceutical materials, there is a demand for innovative formulation platforms for such molecules. Thus a focus on enhancing dissolution properties of poorly soluble drugs exists. Within this study, the spin coating of acetone solutions containing 5,5-diphenyl-2,4-imidazolidinedione (phenytoin) in various concentrations is evaluated. The results reveal strong variations of the morphology of deposited phenytoin crystals at silica surfaces. Individual separated particles are obtained on low phenytoin concentrations, and closely packed particular films form when the concentration is increased. As the material is isomorphic, these various morphologies have the same crystalline structure. Dissolution experiments reveal that both the apparent maximum solubility and as the dissolution rate are strongly enhanced compared to bulk powder, suggesting that formulation based on this preparative technique will allow overcoming the low solubility problematic for a variety of drugs.

Development of an advanced intestinal in vitro triple culture permeability model to study transport of nanoparticles.

Intestinal epithelial cell culture models, such as Caco-2 cells, are commonly used to assess absorption of drug molecules and transcytosis of nanoparticles across the intestinal mucosa. However, it is known that mucus strongly impacts nanoparticle mobility and that specialized M cells are involved in particulate uptake. Thus, to get a clear understanding of how nanoparticles interact with the intestinal mucosa, in vitro models are necessary that integrate the main cell types. This work aimed at developing an alternative in vitro permeability model based on a triple culture: Caco-2 cells, mucus-secreting goblet cells and M cells. Therefore, Caco-2 cells and mucus-secreting goblet cells were cocultured on Transwells and Raji B cells were added to stimulate differentiation of M cells. The in vitro triple culture model was characterized regarding confluence, integrity, differentiation/expression of M cells and cell surface architecture. Permeability of model drugs and of 50 and 200 nm polystyrene nanoparticles was studied. Data from the in vitro model were compared with ex vivo permeability results (Ussing chambers and porcine intestine) and correlated well. Nanoparticle uptake was size-dependent and strongly impacted by the mucus layer. Moreover, nanoparticle permeability studies clearly demonstrated that particles were capable of penetrating the intestinal barrier mainly via specialized M cells. It can be concluded that goblet cells and M cells strongly impact nanoparticle uptake in the intestine and should thus be integrated in an in vitro permeability model. The presented model will be an efficient tool to study intestinal transcellular uptake of particulate systems.

Crystallographic textures and morphologies of solution cast Ibuprofen composite films at solid surfaces.

The preparation of thin composite layers has promising advantages in a variety of applications like transdermal, buccal, or sublingual patches. Within this model study the impact of the matrix material on the film forming properties of ibuprofen-matrix composite films is investigated. As matrix materials polystyrene, methyl cellulose, or hydroxyl-ethyl cellulose were used. The film properties were either varied by the preparation route, i.e., spin coating or drop casting, or via changes in the relative ratio of the ibuprofen and the matrix material. The resulting films were investigated via X-ray diffraction and atomic force microscope experiments. The results show that preferred (100) textures can be induced via spin coating with respect to the glass surface, while the drop casting results in a powder-like behavior. The morphologies of the films are strongly impacted by the ibuprofen amount rather than the preparation method. A comparison of the various matrix materials in terms of their impact on the dissolution properties show a two times faster zero order release from methyl cellulose matrix compared to a polystyrene matrix. The slowest rate was observed within the hydroxyl ethyl cellulose as the active pharmaceutical ingredients (APIs) release is limited by diffusion through a swollen matrix. The investigation reveals that the ibuprofen crystallization and film formation is only little effected by the selected matrix material than that compared to the dissolution. A similar experimental approach using other matrix materials may therefore allow to find an optimized composite layer useful for a defined application.

Mucus as barrier for drug delivery by nanoparticles.

The use of nanoparticles (NPs) can improve drug delivery in many pharmaceutical applications. Compared to conventional compounds, NPs are expected to show better tissue penetration and to deliver higher drug amounts more selectively to the target site. NP-based formulations are most advanced for parenteral applications but they are also used for delivery across mucus-covered epithelial surfaces (eye, orogastrointestinal tract, airways, and vagina). The mucus layer represents an important barrier for an NP-based delivery system. In this review, mucus composition, architecture, and turnover of the mucus layer at different anatomical locations are addressed. The influence of particle parameters on mucus penetration/permeation is mentioned and examples for mucoadhesive, mucolytic, and mucus-penetrating particle systems are listed. While mucoadhesive particles have a relatively long history in NP-based drug delivery, mucus penetrating NPs have been developed more recently. These particles may be advantageous for drug delivery to anatomical sites with high mucus turnover.

A comprehensive overview of advanced dynamic in vitro intestinal and hepatic cell culture models.

Orally administered drugs pass through the gastrointestinal tract before being absorbed in the small intestine and metabolised in the liver. To test the efficacy and toxicity of drugs, animal models are often employed; however, they are not suitable for investigating drug-tissue interactions and making reliable predictions, since the human organism differs drastically from animals in terms of absorption, distribution, metabolism and excretion of substances. Likewise, simple static in vitro cell culture systems currently used in preclinical drug screening often do not resemble the native characteristics of biological barriers. Dynamic models, on the other hand, provide in vivo-like cell phenotypes and functionalities that offer great potential for safety and efficacy prediction. Herein, current microfluidic in vitro intestinal and hepatic models are reviewed, namely single- and multi-tissue micro-bioreactors, which are associated with different methods of cell cultivation, i.e., scaffold-based versus scaffold-free.

Toward high-resolution 3D-printing of pharmaceutical implants - A holistic analysis of relevant material properties and process parameters.

In this work, filament-based 3D-printing, the most widely used sub-category of material extrusion additive manufacturing (MEAM), is presented as a promising manufacturing platform for the production of subcutaneous implants. Print nozzle diameters as small as 100 µm were utilized demonstrating MEAM of advanced porous internal structures at the given cylindrical implant geometry of 2 mm × 40 mm. The bottlenecks related to high-resolution MEAM of subcutaneous implants are systematically analyzed and the print process is optimized accordingly. Custom synthesized biodegradable phase-separated poly(ether ester) multiblock copolymers exhibiting appropriate melt viscosity at comparatively low printing temperatures of 135 °C and 165 °C were utilized as 3D-printing feedstock. The print process was optimized to minimize thermomechanical polymer degradation by employing print speeds of 30 mm∙s-1 in combination with a nozzle diameter of 150 µm at layer heights of 110 µm. These results portray the basis for further development of subcutaneous implantable drug delivery systems where drug release profiles can be tailored through the adaption of the internal implant structure, which cannot be achieved using existing manufacturing techniques.