Sustainable production of pharmaceutical, nutraceutical and bioactive compounds from biomass and waste.

The aim of this tutorial review is to provide a general overview of processes, technologies and challenges in the production of pharmaceutical and bioactive compounds from food waste and lignocellulosic residues. Particular attention is given to benign-by-design processes instinctively devoted to environmental sustainability for the recovery of bioactive compounds from food waste as well as for the production of alcohols, acids, polyols, furans and aromatic compounds from lignocellulosic residues. At the same time, novel green synthetic routes for the production of active pharmaceutical ingredients and the development of novel bioactive compounds are discussed. Recent success industrial stories on the use of food waste and lignocellulosic residues for pharmaceutical and nutraceutical applications are also discussed.

Nature-inspired hierarchical materials for sensing and energy storage applications.

Nature-inspired hierarchical architectures have recently drawn enormous interest in the materials science community, being considered as promising materials for the development of high-performance wearable electronic devices. Their highly dynamic interfacial interactions have opened new horizons towards the fabrication of sustainable sensing and energy storage materials with multifunctional properties. Nature-inspired assemblies can exhibit impressive properties including ultrahigh sensitivity, excellent energy density and coulombic efficiency behaviors as well as ultralong cycling stability and durability, which can be finely tuned and enhanced by controlling synergistic interfacial interactions between their individual components. This tutorial review article aims to address recent breakthroughs in the development of advanced Nature-inspired sensing and energy storage materials, with special emphasis on the influence of interfacial interactions over their improved properties.

Glycerol Valorization towards a Benzoxazine Derivative through a Milling and Microwave Sequential Strategy.

Glycerol and aminophenol intermolecular condensation has been investigated through a milling and microwave-assisted sequential strategy, towards the synthesis of a benzoxaxine derivative. Mechanochemical activation prior to the microwave-assisted process could improve the probability of contact between the reagents, and greatly favors the higher conversion of aminophenol. At the same time, following a mechanochemical-microwave sequential approach could tune the selectivity towards the formation of a benzoxazine derivative, which could find application in a wide range of biomedical areas.

New bio-nanocomposites based on iron oxides and polysaccharides applied to oxidation and alkylation reactions.

Polysaccharides from natural sources and iron precursors were applied to develop new bio-nanocomposites by mechanochemical milling processes. The proposed methodology was demonstrated to be advantageous in comparison with other protocols for the synthesis of iron oxide based nanostructures. Additionally, mechanochemistry has enormous potential from an environmental point-of-view since it is able to reduce solvent issues in chemical syntheses. The catalytic activity of the obtained nanocatalysts was investigated in both the oxidation of benzyl alcohol to benzaldehyde and in the alkylation of toluene with benzyl chloride. The microwave-assisted oxidation of benzyl alcohol reached 45% conversion after 10 min. The conversion of the alkylation of toluene in both microwave-assisted and conventional heating methods was higher than 99% after 3 min and 30 min, respectively. The transformation of benzyl alcohol and toluene into valuable product in both the oxidation and alkylation reaction reveals a potential method for the valorization of lignocellulosic biomass.

Chitin-Derived Nanocatalysts for Reductive Amination Reactions.

Chitin, the second most abundant biopolymer in the planet after cellulose, represents a renewable carbon and nitrogen source. A thrilling opportunity for the valorization of chitin is focused on the preparation of biomass-derived N-doped carbonaceous materials. In this contribution, chitin-derived N-doped carbons were successfully prepared and functionalized with palladium metal nanoparticles. The physicochemical properties of these nanocomposites were investigated following a multi-technique strategy and their catalytic activity in reductive amination reactions was explored. In particular, a biomass-derived platform molecule, namely furfural, was upgraded to valuable bi-cyclic compounds under continuous flow conditions.

Coffee-waste templated CeOx/TiO2 nanostructured materials for selective photocatalytic oxidations.

An environmentally friendly solvent-free approach was tested using spent coffee as a biomass sacrificial template for the preparation of TiO2 modified with CeOx. The use of coffee as a template pursues the preparation of a nanostructured heterojunction without the need for a solvent. Two variables were optimized in the synthesis process, i.e. calcination temperature and proportion of CeOx. Firstly, bare coffee-template titania was prepared to explore the effect of the calcination temperature, within 500-650 °C. The anatase phase was obtained up to 600 °C. Higher temperatures, i.e. 650 °C, led to the appearance of rutile (10%) and efficient removal of the sacrificial agent (0.6% residue). The maximum photocatalytic activity in terms of conversion, in the oxidation of benzyl alcohol, was achieved employing the bare coffee-template TiO2 at 650 °C, and it was found comparable to the benchmarked P25. The incorporation of ceria in the solvent-free approach considerably improved photocatalytic benzaldehyde production. No changes in the XRD pattern of TiO2 were appreciated in the presence of ceria due to the low amount added, within 1.5-6.0%, confirmed by XPS as superficial Ce3+/Ce4+. The UV-visible absorption spectra were considerably redshifted in the presence of Ce, reducing the bandgap values of bare titania. An optimum amount of ceria in the structure within 3-0% was found. In this case, the selectivity towards benzaldehyde was ca. 75%, 3 times higher than the selectivity value registered for the benchmarked P25 or the bare prepared TiO2.

Tuning the Selectivity of the Hydrogenation/Hydrogenolysis of 5-Hydroxymethylfurfural under Batch Multiphase and Continuous-Flow Conditions.

The hydrogenation/hydrogenolysis of 5-hydroxymethylfurfural (HMF) has been carried out either under single (aqueous) phase or batch multiphase (MP) conditions using mutually immiscible aqueous/hydrocarbon phases, 5 % Ru/C as a catalyst, and both with and without the use of trioctylmethyl phosphonium bis-(trifluoro methane) sulfonimide ([P8881 ][NTf2 ]) as an ionic liquid (IL). Alternatively, the hydrogenation of HMF was explored in the continuous-flow (CF) mode with the same catalyst. By changing reaction parameters, experiments were optimized towards the formation of three products: 2,5-bis(hydroxy methyl)furan (BHMF), 2,5-bis(hydroxymethyl)tetrahydrofuran (BHMTHF), and 1-hydroxyhexane-2,5-dione (HHD), which were obtained in up to 92, 90, and 99 % selectivity, respectively, at quantitative conversion. In particular, the single (aqueous) phase reaction of HMF (0.2 m) carried out for 18 h at 60 °C under 30 bar of H2 , allowed the exclusive synthesis of BHMF from the partial (carbonyl) hydrogenation of HMF, while the MP reaction run at a higher T and p (100 °C and 50 bar) proved excellent to achieve only HHD derived from a sequence of hydrogenation/hydrogenolysis. It is worth noting that under MP conditions, the catalyst was perfectly segregated in the IL, where it could be recycled without any leaching in the aqueous/hydrocarbon phases. Finally, the hydrogenation of HMF was explored in a H-Cube® flow reactor in the presence of different solvents, such as ethyl acetate, tetrahydrofuran, and ethanol. At 100 °C, 50 bar H2 , and a flow rate of 0.1 mL min-1 , the process was optimized towards the formation of the full hydrogenation product BHMTHF. Ethyl acetate proved the best solvent.

Metal-Free N-Doped Carbons for Solvent-Less CO2 Fixation Reactions: A Shrimp Shell Valorization Opportunity.

High anthropogenic CO2 emissions are among the main causes of climate change. Herein, we investigate the use of CO2 for the synthesis of organic cyclic carbonates on metal-free nitrogen-doped carbon catalysts obtained from chitosan, chitin, and shrimp shell wastes, both in batch and in continuous flow (CF). The catalysts were characterized by N2 physisorption, CO2-temperature-programmed desorption, X-ray photoelectron spectroscopy, scanning electron microscopy, and CNHS elemental analysis, and all reactivity tests were run in the absence of solvents. Under batch conditions, the catalyst obtained by calcination of chitin exhibited excellent performance in the conversion of epichlorohydrin (selected as a model epoxide), resulting in the corresponding cyclic carbonate with 96% selectivity at complete conversion, at 150 °C and 30 bar CO2, for 4 h. On the other hand, in a CF regime, a quantitative conversion and a carbonate selectivity >99% were achieved at 150 °C, by using the catalyst obtained from shrimp waste. Remarkably, the material displayed an outstanding stability over a reaction run time of 180 min. The robustness of the synthetized catalysts was confirmed by their good operational stability and reusability: ca. (75 ± 3)% of the initial conversion was achieved/retained by all systems, after six recycles. Also, additional batch experiments proved that the catalysts were successful on different terminal and internal epoxides.

Mechanochemically Synthetized PAN-Based Co-N-Doped Carbon Materials as Electrocatalyst for Oxygen Evolution Reaction.

We report a new class of polyacrylonitrile (PAN)-based Co-N-doped carbon materials that can act as suitable catalyst for oxygen evolution reactions (OER). Different Co loadings were mechanochemically added into post-consumed PAN fibers. Subsequently, the samples were treated at 300 °C under air (PAN-A) or nitrogen (PAN-N) atmosphere to promote simultaneously the Co3O4 species and PAN cyclization. The resulting electrocatalysts were fully characterized and analyzed by X-ray diffraction (XRD) and photoelectron spectroscopy (XPS), transmission (TEM) and scanning electron (SEM) microscopies, as well as nitrogen porosimetry. The catalytic performance of the Co-N-doped carbon nanomaterials were tested for OER in alkaline environments. Cobalt-doped PAN-A samples showed worse OER electrocatalytic performance than their homologous PAN-N ones. The PAN-N/3% Co catalyst exhibited the lowest OER overpotential (460 mV) among all the Co-N-doped carbon nanocomposites, reaching 10 mA/cm2. This work provides in-depth insights on the electrocatalytic performance of metal-doped carbon nanomaterials for OER.

Mechanochemical Preparation of Magnetically Separable Fe and Cu-Based Bimetallic Nanocatalysts for Vanillin Production.

A highly sustainable method for the preparation of supported iron oxide and copper nanoparticles (NPs) on a biomass-derived carbon by solvent-free mechanochemical process is reported. In-situ mechanochemically obtained extracts from orange peel could behave as a green reducing agent, allowing the formation of Cu metal nanoparticles as well as generating a magnetic phase (magnetite) in the systems via partial Fe3+ reduction. At the same time, orange peel residues also served as template and carbon source, adding oxygen functionalities, which were found to benefit the catalytic performance of mechanochemically synthesized nanomaterials. The series of magnetic Cu-Fe@OP were tested in the oxidation of trans-ferulic acid towards vanillin, remarkably revealing a maximum vanillin yield of 82% for the sample treated at 200 °C.

State-of-the-Art of Eggshell Waste in Materials Science: Recent Advances in Catalysis, Pharmaceutical Applications, and Mechanochemistry.

Eggshell waste is among the most abundant waste materials coming from food processing technologies. Despite the unique properties that both its components (eggshell, ES, and eggshell membrane, ESM) possess, it is very often discarded without further use. This review article aims to summarize the recent reports utilizing eggshell waste for very diverse purposes, stressing the need to use a mechanochemical approach to broaden its applications. The most studied field with regards to the potential use of eggshell waste is catalysis. Upon proper treatment, it can be used for turning waste oils into biodiesel and moreover, the catalytic effect of eggshell-based material in organic synthesis is also very beneficial. In inorganic chemistry, the eggshell membrane is very often used as a templating agent for nanoparticles production. Such composites are suitable for application in photocatalysis. These bionanocomposites are also capable of heavy metal ions reduction and can be also used for the ozonation process. The eggshell and its membrane are applicable in electrochemistry as well. Due to the high protein content and the presence of functional groups on the surface, ESM can be easily converted to a high-performance electrode material. Finally, both ES and ESM are suitable for medical applications, as the former can be used as an inexpensive Ca2+ source for the development of medications, particles for drug delivery, organic matrix/mineral nanocomposites as potential tissue scaffolds, food supplements and the latter for the treatment of joint diseases, in reparative medicine and vascular graft producing. For the majority of the above-mentioned applications, the pretreatment of the eggshell waste is necessary. Among other options, the mechanochemical pretreatment has found an inevitable place. Since the publication of the last review paper devoted to the mechanochemical treatment of eggshell waste, a few new works have appeared, which are reviewed here to underline the sustainable character of the proposed methodology. The mechanochemical treatment of eggshell is capable of producing the nanoscale material which can be further used for bioceramics synthesis, dehalogenation processes, wastewater treatment, preparation of hydrophobic filters, lithium-ion batteries, dental materials, and in the building industry as cement.

Proteins-Based Nanocatalysts for Energy Conversion Reactions.

In recent years, the incorporation of molecular enzymes into nanostructured frameworks to create efficient energy conversion biomaterials has gained increasing interest as a promising strategy owing to both the dynamic behavior of proteins for their electrocatalytic function and the unique properties of the synergistic interactions between proteins and nanosized materials. Herein, we review the impact of proteins on energy conversion fields and the contribution of proteins to the improved activity of the resulting nanocomposites. We address different strategies to fabricate protein-based nanocatalysts as well as current knowledge on the structure-function relationships of enzymes during the catalytic processes. Additionally, a comprehensive review of state-of-the-art bioelectrocatalytic materials for water-splitting reactions such as hydrogen evolution reaction (HER) and oxygen evolution reactions (OER) is afforded. Finally, we briefly envision opportunities to develop a new generation of electrocatalysts towards the electrochemical reduction of N2 to NH3 using theoretical tools to built nature-inspired nitrogen reduction reaction catalysts.

Improving Electrochemical Hydrogen Evolution of Ag@CN Nanocomposites by Synergistic Effects with α-Rich Proteins.

A graphitic carbon nitride nanostructure has been successfully functionalized by incorporation of different silver contents and subsequent modification with an α-rich protein, namely hemoglobin. Mechanochemistry has been employed, as an efficient and sustainable procedure, for the incorporation of the protein. A complete characterization analysis has been performed following a multitechnique approach. Particularly, XPS data exhibited considerable differences in the C 1s region for the Hb/xAg@CN, ensuring the successful protein anchorage on the surface of the graphitic carbon nitride-based materials. The as-synthesized nanomaterials delivered impressive performance toward hydrogen evolution reactions with an overpotential of 79 mV at a current density of 10 mA/cm2 for Hb/20Ag@CN nanohybrids, which is comparable with the most efficient HER electrocatalysts reported in the literature. The outstanding HER properties were associated with the unique synergistic interactions, quantitatively measured, between AgNPs, Hb tertiary architecture, and the graphitic carbon nitride networks.

Microvesicles from indoxyl sulfate-treated endothelial cells induce vascular calcification in vitro.

Vascular calcification (VC), an unpredictable pathophysiological process and critical event in patients with cardiovascular diseases (CVDs), is the leading cause of morbi-mortality and disability in chronic kidney disease (CKD) patients worldwide. Currently, no diagnostic method is available for identifying patients at risk of VC development; the pathology is detected when the process is irreversible. Extracellular vesicles (EVs) from endothelial cells might promote VC. Therefore, their evaluation and characterization could be useful for designing new diagnostic tools. The aim of the present study is to investigate whether microvesicles (MVs) from endothelial cells damaged by uremic toxin and indoxyl sulfate (IS) could induce calcification in human vascular smooth muscle cells (VMSCs). Besides, we have also analyzed the molecular mechanisms by which these endothelial MVs can promote VC development. Endothelial damage has been evaluated according to the percentage of senescence in endothelial cells, differential microRNAs in endothelial cells, and the amount of MVs released per cell. To identify the role of MVs in VC, VSMCs were treated with MVs from IS-treated endothelial cells. Calcium, inflammatory gene expression, and procalcification mediator levels in VSMCs were determined. IS-treated endothelial cells underwent senescence and exhibited modulated microRNA expression and an increase in the release of MVs. VSMCs exposed to these MVs modulated the expression of pro-inflammatory genes and some mediators involved in calcification progression. MVs produced by IS-treated endothelial cells promoted calcification in VSMCs.

Thermal and light irradiation effects on the electrocatalytic performance of hemoglobin modified Co3O4-g-C3N4 nanomaterials for the oxygen evolution reaction.

The oxygen evolution reaction (OER) plays a key role in the water splitting process and a high energy conversion efficiency is essential for the definitive advance of hydrogen-based technologies. Unfortunately, the green and sustainable development of electrocatalysts for water oxidation is nowadays a real challenge. Herein, a successful mechanochemical method is proposed for the synthesis of a novel hemoglobin (Hb) modified Co3O4/g-C3N4 composite nanomaterial. The controlled incorporation of cobalt entities as well as Hb functionalization, without affecting the g-C3N4 nanoarchitecture, was evaluated using different physicochemical techniques, such as X-ray diffraction, N2-physisorption, scanning electron microscopy, UV-visible spectroscopy and X-ray photoelectron spectroscopy. The beneficial effect of the resulting ternary bioconjugate together with the influence of the temperature and light irradiation was investigated by electrochemical analysis. At 60 °C and under light exposition, this electrocatalyst requires an overpotential of 370 mV to deliver a current density of 10 mA·cm-2, showing a Tafel slope of 66 mV·dec-1 and outstanding long-term stability for 600 OER cycles. This work paves a way for the controlled fabrication of multidimensional and multifunctional bio-electrocatalysts.

Waste-derived Materials: Opportunities in Photocatalysis.

Waste-derived materials have been gaining increased attention in recent years due to their great potential and environmentally friendly nature. Several contributions in the literature have covered the advances achieved so far in this area. Nonetheless, to the best of our knowledge, no review has been dedicated specifically to waste-derived or templated photocatalytic materials. Both photocatalysis and (bio)waste-inspired design yield materials of a remarkably green nature. Therefore, the partnership between them may open promising possibilities for both waste valorization and photocatalytic processes, which in turn will lead to sustainable development globally, with the potential for full utilization of renewable energy sources such as biomass and sunlight. Several photocatalytic waste-derived materials, synthetic procedures, and applications will be described throughout this work, including waste-derived/templated TiO2, ZnO, and metal sulfide materials. Special attention will be given to biomass-inspired carbonaceous materials, including carbon quantum dots and graphitic carbon nitride (g-C3N4).

Mechanochemical synthesis of three double perovskites: Cs2AgBiBr6, (CH3NH3)2TlBiBr6 and Cs2AgSbBr6.

A wide majority of the organic-inorganic hybrid perovskites employed in photovoltaics contain Pb, which is a negative issue due to its high toxicity and the low stability of the Pb-based three-dimensional (3D) perovskites. The double perovskites or "elpasolites" with the formula A2BB'X6 arise as an alternative to avoid the use of Pb, however, not many of the theoretically predicted structures have been synthesized so far due to several synthetic issues, such as, the formation of stable side products. Herein, we report the synthesis of three double perovskites, Cs2AgBiBr6, MA2TlBiBr6 and Cs2AgSbBr6, through a highly efficient and reproducible mechanochemical approach: the high energy ball milling. This synthetic approach does not require the use of organic solvents, so it is a greener method compared to those reported for other double perovskites. The Cs2AgBiBr6 and MA2TlBiBr6 double perovskites were synthesized with high purity as proved by X-ray diffraction (XRD) and X-ray fluorescence (XRF) measurements. However, the Cs2AgSbBr6 double perovskite was obtained in mixture with Cs3Sb2Br9, a side product of the reaction. Several attempts to prepare the Cs2AgSbBr6 double perovskite by using other synthetic methods have been unsuccessful due to the low formation enthalpy of the Cs3Sb2Br9 side product and only the hydrothermal method afforded Cs2AgSbBr6 in mixture with other compounds. We believe that the low temperature required in the ball milling synthesis is the key factor that allows the formation of the antimony double perovskite. Cs2AgSbBr6 is a brown powder with a bandgap energy of 1.93 eV as shown with diffuse reflectance measurements. The three powders exhibit a very high stability with no changes at all in the crystal structure after several months of storage at room temperature and ambient humidity.

Continuous Flow Synthesis of High Valuable N-Heterocycles via Catalytic Conversion of Levulinic Acid.

Graphitic carbon nitride (g-C3N4) was successfully functionalized with a low platinum loading to give rise to an effective and stable catalytic material. The synthesized g-C3N4/Pt was fully characterized by XRD, N2 physisorption, XPS, SEM-Mapping, and TEM techniques. Remarkably, XPS analysis revealed that Pt was in a dominant metallic state. In addition, XPS together with XRD and N2 physisorption measurements indicated that the g-C3N4 preserves its native structure after the platinum deposition process. g-C3N4/Pt was applied to the catalytic conversion of levulinic acid to N-heterocycles under continuous flow conditions. Reaction parameters (temperature, pressure, and concentration of levulinic acid) were studied using 3 levels for each parameter, and the best conditions were employed for the analysis of the catalyst's stability. The catalytic system displayed high selectivity to 1-ethyl-5-methylpyrrolidin-2-one and outstanding stability after 3 h of reaction.

Mimicking the bioelectrocatalytic function of recombinant CotA laccase through electrostatically self-assembled bioconjugates.

Unprecedented 3D nanobiosystems composed of recombinant CotA laccases and citrate-stabilised gold nanoparticles have been successfully achieved by an electrostatic self-assembly strategy. The bioelectrochemical reduction of O2 driven by CotA laccase at the spore coat was mimicked. Consequently key insights into its bioelectrocatalytic function were unravelled.

Highly efficient direct oxygen electro-reduction by partially unfolded laccases immobilized on waste-derived magnetically separable nanoparticles.

A biocatalytic system based on laccase functionalized waste-derived iron oxide nanoparticles (LAC-DA-Fe2O3) was designed by a mechanochemical approach and employed in the electrocatalytic reduction of oxygen. Full characterization of the obtained bioconjugates revealed that the protein adopted a partially unfolded state. The mentioned configuration, together with the geometry coordination changes along the T1 center can be further related to a high bioelectrocatalytic response. A current density up to 2.9 mA cm-2 has been achieved, which is among the highest values reported in literature for laccase functionalized nanomaterials.