Translocation of HIV TAT peptide and analogues induced by multiplexed membrane and cytoskeletal interactions.

Cell-penetrating peptides (CPPs), such as the HIV TAT peptide, are able to translocate across cellular membranes efficiently. A number of mechanisms, from direct entry to various endocytotic mechanisms (both receptor independent and receptor dependent), have been observed but how these specific amino acid sequences accomplish these effects is unknown. We show how CPP sequences can multiplex interactions with the membrane, the actin cytoskeleton, and cell-surface receptors to facilitate different translocation pathways under different conditions. Using "nunchuck" CPPs, we demonstrate that CPPs permeabilize membranes by generating topologically active saddle-splay ("negative Gaussian") membrane curvature through multidentate hydrogen bonding of lipid head groups. This requirement for negative Gaussian curvature constrains but underdetermines the amino acid content of CPPs. We observe that in most CPP sequences decreasing arginine content is offset by a simultaneous increase in lysine and hydrophobic content. Moreover, by densely organizing cationic residues while satisfying the above constraint, TAT peptide is able to combine cytoskeletal remodeling activity with membrane translocation activity. We show that the TAT peptide can induce structural changes reminiscent of macropinocytosis in actin-encapsulated giant vesicles without receptors.

Enzyme-triggered cargo release from methionine sulfoxide containing copolypeptide vesicles.

We have developed a facile, scalable method for preparation of enzyme-responsive copolypeptide vesicles that requires no protecting groups or expensive components. We designed amphiphilic copolypeptides containing segments of water-soluble methionine sulfoxide, M(O), residues that were prepared by synthesis of a fully hydrophobic precursor diblock copolypeptide, poly(l-methionine)65-b-poly(L-leucine0.5-stat-L-phenylalanine0.5)20, M65(L0.5/F0.5)20, followed by its direct oxidation in water to give the amphiphilic M(O) derivative, M(O)65(L0.5/F0.5)20. Assembly of M(O)65(L0.5/F0.5)20 in water gave vesicles with average diameters of a few micrometers that could then be extruded to nanoscale diameters. The M(O) segments in the vesicles were found to be substrates for reductase enzymes, which regenerated hydrophobic M segments and resulted in a change in supramolecular morphology that caused vesicle disruption and release of cargos.

Endocytosis and intracellular trafficking properties of transferrin-conjugated block copolypeptide vesicles.

Block polypeptides are an emerging class of materials that have the potential to be used in many biomedical applications, including the field of drug delivery. We have previously developed a negatively charged block copolypeptide, poly(L-glutamate)60-b-poly(L-leucine)20 (E60L20), which forms spherical vesicles in aqueous solution. Since these vesicles are negatively charged, they are minimally toxic toward cells. However, the negative charge also inhibits these vesicles from effectively being internalized by cells, which can be problematic as many therapeutics have intracellular targets. To overcome this limitation of the E60L20 vesicles, transferrin (Tf) was conjugated onto the vesicle surface, since the receptor for Tf is overexpressed on cancer cells. The enhanced uptake of the Tf-conjugated vesicle was verified through confocal microscopy. Furthermore, endocytosis and immunostaining experiments confirmed that the Tf conjugated on the vesicle surface plays a critical role in the internalization and subsequent intracellular trafficking behavior of the vesicles.

Dual Component Passive Icephobic Coatings with Micron-Scale Phase-Separated 3D Structures.

A passive icephobic coating (τice < 20 kPa) is an enabling technology to many industries, including aerospace and energy and power generation, with recent efforts in materials research identifying strategies to achieve this low adhesion threshold. To better meet this need, we have combined low surface energy perfluoropolyether (PFPE) and hydrophilic poly(ethylene glycol) (PEG) species in a segmented polyurethane thermoplastic elastomer. Coating microstructure presents a segregated 3D morphology at the micron-scale (1-100 µm) with discrete PFPE and continuous PEG phases self-similar through the thickness. Spray application produces a solid, mechanically tough film free of additive fluids or sacrificial elements, demonstrating exceptional ice adhesion reduction up to 1000× lower versus aluminum (τice < 1 kPa), as measured under environmentally realistic accretion and centrifugal test shedding conditions. Finally, the modular nature of the synthetic system allows PEG and PFPE to be exchanged for poly(tetramethylene oxide) to investigate performance drivers.

Polypeptide-Based Gold Nanoshells for Photothermal Therapy.

Targeted killing of cancer cells by engineered nanoparticles holds great promise for noninvasive photothermal therapy applications. We present the design and generation of a novel class of gold nanoshells with cores composed of self-assembled block copolypeptide vesicles with photothermal properties. Specifically, poly(L-lysine)60- block-poly(L-leucine)20 (K60L20) block copolypeptide vesicles coated with a thin layer of gold demonstrate enhanced absorption of light due to surface plasmon resonance (SPR) in the near-infrared range. We show that the polypeptide-based K60L20 gold nanoshells have low toxicity in the absence of laser exposure, significant heat generation upon exposure to near-infrared light, and, as a result, localized cytotoxicity within the region of laser irradiation in vitro. To gain a better understanding of our gold nanoshells in the context of photothermal therapy, we developed a comprehensive mathematical model for heat transfer and experimentally validated this model by predicting the temperature as a function of time and position in our experimental setup. This model can be used to predict which parameters of our gold nanoshells can be manipulated to improve heat generation for tumor destruction. To our knowledge, our results represent the first ever use of block copolypeptide vesicles as the core material of gold nanoshells.

Engineering A11 Minibody-Conjugated, Polypeptide-Based Gold Nanoshells for Prostate Stem Cell Antigen (PSCA)-Targeted Photothermal Therapy.

Currently, there is no curative treatment for advanced metastatic prostate cancer, and options, such as chemotherapy, are often nonspecific, harming healthy cells and resulting in severe side effects. Attaching targeting ligands to agents used in anticancer therapies has been shown to improve efficacy and reduce nonspecific toxicity. Furthermore, the use of triggered therapies can enable spatial and temporal control over the treatment. Here, we combined an engineered prostate cancer-specific targeting ligand, the A11 minibody, with a novel photothermal therapy agent, polypeptide-based gold nanoshells, which generate heat in response to near-infrared light. We show that the A11 minibody strongly binds to the prostate stem cell antigen that is overexpressed on the surface of metastatic prostate cancer cells. Compared to nonconjugated gold nanoshells, our A11 minibody-conjugated gold nanoshell exhibited significant laser-induced, localized killing of prostate cancer cells in vitro. In addition, we improved upon a comprehensive heat transfer mathematical model that was previously developed by our laboratory. By relaxing some of the assumptions of our earlier model, we were able to generate more accurate predictions for this particular study. Our experimental and theoretical results demonstrate the potential of our novel minibody-conjugated gold nanoshells for metastatic prostate cancer therapy.

Blending of diblock and triblock copolypeptide amphiphiles yields cell penetrating vesicles with low toxicity.

We prepared dual hydrophilic triblock copolypeptide vesicles that form both micron and nanometer scale vesicles in aqueous media. The incorporation of terminal homoarginine segments into methionine sulfoxide-based vesicles was found to significantly enhance their cellular uptake compared to a non-ionic control. We also demonstrated that diblock and triblock copolypeptides with similar hydrophobic domains were found to mix well and form vesicle populations with uniform compositions. Blending of amphiphiles in vesicle nanocarriers was found to impart these materials with many advantageous properties, including good cellular uptake while maintaining minimal toxicity, as well as biological responsiveness to promote vesicle disruption and release of encapsulated cargos.

The targeted delivery of doxorubicin with transferrin-conjugated block copolypeptide vesicles.

We previously investigated the intracellular trafficking properties of our novel poly(l-glutamate)60-b-poly(l-leucine)20 (E60L20) vesicles (EL vesicles) conjugated to transferrin (Tf). In this study, we expand upon our previous work by investigating the drug encapsulation, release, and efficacy properties of our novel EL vesicles for the first time. After polyethylene glycol (PEG) was conjugated to the vesicles for steric stability, doxorubicin (DOX) was successfully encapsulated in the vesicles using a modified pH-ammonium sulfate gradient method. Tf was subsequently conjugated to the vesicles to provide active targeting to cancer cells and a mode of internalization into the cells. These Tf-conjugated, DOX-loaded, PEGylated EL (Tf-DPEL) vesicles exhibited colloidal stability and were within the allowable size range for passive and active targeting. A mathematical model was then derived to predict drug release from the Tf-DPEL vesicles by considering diffusive and convective mass transfer of DOX. Our mathematical model reasonably predicted our experimentally measured release profile with no fitted parameters, suggesting that the model could be used in the future to manipulate drug carrier properties to alter drug release profiles. Finally, an in vitro cytotoxicity assay was used to demonstrate that the Tf-DPEL vesicles exhibited enhanced drug carrier efficacy in comparison to its non-targeted counterpart.

Transfection of mammalian cells using block copolypeptide vesicles.

An arginine-leucine block copolypeptide (R60 L20 ) is synthesized, which is capable of forming vesicles with controllable sizes, able to transport hydrophilic cargo across the cell membrane, and exhibit relatively low cytotoxicity. The R60 L20 vesicles also possess the ability to deliver DNA into mammalian cells for transfection. Although the transfection efficiency is lower than that of the commercially available transfection agent Lipofectamine 2000, the R60 L20 vesicles are able to achieve transfection with significantly lower cytotoxicity and immunogenicity. This behavior is potentially due to its stronger interaction with DNA which subsequently provides better protection against anionic heparin.

Fine tuning of vesicle assembly and properties using dual hydrophilic triblock copolypeptides.

The design, synthesis, and self-assembly of the first dual hydrophilic triblock copolypeptide vesicles, R(H)(m)E(n)L(o) and K(P)(m)R(H)(n)L(o), is reported. Variation of the two distinct hydrophilic domains is used to tune cellular interactions without disrupting the self-assembled structure. The aqueous self-assemblies of these triblock copolypeptides in water are characterized using microscopy and DLS. Cell culture studies are used to evaluate cytotoxicity as well as intracellular uptake of the vesicles. The ability of polypeptides to incorporate ordered chain conformations that direct self-assembly, combined with the facile preparation of functional, multiblock copolypeptide sequences of defined lengths, allow the design of vesicles attractive for development as drug carriers.